PA000734-02 Operators Manual (UK).cdr
Contents
1. be reading the length of time of dispense eg 0500 5 seconds This time can be amended by pressing the 1 or 2 buttons 7 The free flow option can be set by amending the time setting to 0000 8 Press Set button and the display will return to Set water shots The procedure can now be repeated to set the dispense volumes for other dispense buttons 9 Press the Set button to return the machine to Machine ready status Note Machine will not operate unless the display reads Machine Ready lf water option is available dispense is free flow only Setting of low concentrate warning An indication that the bag in box concentrate is nearly empty can be setin the machine Ared warning light will be illuminated when approx 10 ofthe concentrate remains This feature is not available when using refillable containers autonums Q A Low concentrate warning lights To set the low concentrate warning lights 1 Ensure display reads Machine ready 2 Insert a new pack of concentrate into the machine 3 Press and hold the Set button for 3 seconds Display will read New Bag 5 Press any left hand dispense button to re set the left hand pack or any right hand dispense button to re set the right hand pack The display will briefly show which side has been set left or right and then Saved before returning to Machine Ready The low concentrate warning light w2. peristaltic pump with 3 roller rotor 24v DC Motor Fits silicone tube 6 4mm I D x 2 4mm wall Programmable drink shot size or free flow 2 x 5 litre disposable bag in box Overview of Controls RUN FLUSH Flush Mode Switch Light switch The three buttons shown in Fig 1 can be used to amend and set the following parameters 1 Drink strength Brix level 2 Drink shot size drink volume 3 Concentrate low warning light 4 Machine lockout See later in the manual for more details Setting of drink strength Brix Drink strength depends on two factors concentrate delivery and water delivery Concentrate can be adjusted between High and Low pump speeds Water can be adjusted between 0 and 100 on the digital scale 0 less water stronger drink 100 more water weaker drink These two elements can be adjusted by pressing the buttons on the control panel as shown in Fig 1 1 Ensure display reads Machine ready 2 Press and hold the 1 button or 2 button for 3 seconds depending on whether the left hand 1 or right hand 2 product is being set In this example we will set the left hand product 1 3 Display will show left until button is released It will then show pump speed and water setting eg High 0030 4 Pressing the 1 button will then toggle between High and Low pump speed settings 5 Press the Set button to confirm pump speed 6 Disp
3. autonumis Bravanti machine refreshing Operators Manual This guide contains instructions on how to use Autonumis Bravanti machines Document PA000734 Issue 2 Note Installation of this equipment should be undertaken by a trained and authorised engineer and is detailed in a separate installation and servicing manual This operators manual is a guide to machine loading setting and maintenance only Contents Specification 2 Overview of controls 3 Concentrate loading 9 Cleaning 8 maintenance 11 End oflife disposal 14 Due to our policy of continual product improvement any diagrams and illustrations of the product and or its component parts contained within this document may appear different from that those supplied However the contents of this document and the functionality of the product and or its components thatit describes remain unaffected 298 oO Oo oO 0 Oo oO Oo Weight Electrical Water connection Water pressure Refrigeration Brix adjustment Pump Portion control Product capacity Specification 640 Dry 55 5 kg Packed 62 5kg Installed 64 5kg UK EU 230v 50hz 3 4 BSP hose connection Minimum dynamic water pressure 2 5 Bar Maximum dynamic water pressure 8 Bar Pressure regulated in machine to suit site conditions R134a Hermetic compressor Concentrate storage compartment chilled to 4 C Electronic control Easy load
4. ill go out 7 Setting the machine to Flush mode Setting the machine to Flush mode enables the dispense valves to be cleaned without removal from the machine 1 Ensure display reads Machine ready 2 Set the Flush Mode Switch see Fig 1 to Flush The display will read Flush 3 Place a jug beneath the dispense valve to be flushed Press and hold any of the left or right dispense buttons on the front of the machine to flush water through either the left or right dispense valves Machine operates in free flow mode when set to Flush water will be dispensed until the dispense button is released 4 Set the Flush mode Switch see Fig 1 back to the Run position to return to Machine Ready Setting the machine to Lockout The machine can be locked out when not in use In this mode no product will be dispensed 1 Ensure display reads Machine ready 2 Press and hold the Set button for 3 seconds The display will read New Bag 3 Press either the 1 or the 2 buttons until Lock Machine Is displayed 4 Press and hold the Set button for 3 seconds until Out of Service is displayed Machine is now in lockout mode 5 To exit from Lockout mode press and hold the Set button for 6 seconds until Machine Ready is displayed Concentrate loading Note The concentrate carton has been removed from the following phot
5. lay will now show the water setting Press the 1 or 2 buttons to increase or decrease the setting 7 Press the Set button Display will now show the pump speed and water setting eg High 0025 8 Press Set button again to confirm Display will now read Machine Ready Note Machine will not operate unless the display reads Machine Ready When adjusting the Brix level the first drink dispensed should be discarded The Brix level should always be checked using a good quality refractometer Drink shot size drink volume Your machine will be fitted with one of the following dispense panels U el iselal laali O 7 On On Oni Multiple drink dispense volumes autonumis O Q O Single drink dispense volume The machine can be set to give up to three different volumes of drink per side or can be set to free flow Note Dispense panels shown with water option Drink shot size contd 1 Ensure display reads Machine ready 2 Press and hold the Set button see Fig 1 for 3 seconds until the display reads New Bag 3 Press either the 1 or the 2 buttons until the display reads set water shots 4 Shut the door and place the required size glass under the dispense nozzle on the drip tray 5 Press and hold the dispense button on the front of the machine until the glass is filled to the required volume 6 Open the door The display will
6. ly located When fully connected the dispense module should be horizontal If it is angled upwards it is not sitting down fully on the location pins See previous page 13 a End of life disposal This unit contains fluorinated greenhouse gas HFC 134 a regulated by the Koyoto protocol the warming potential of which is 1300 and therefore must be disposed of responsibly autonumis Autonumis Ltd Cirencester Rd Tetbury Gloucestershire GL8 8SA United Kingdom Tel 44 0 1666 502641 Fax 44 0 1666 504397 15
7. ographs for clarification purposes 1 Remove the round perforated area from the bottom of the concentrate carton and pull out the tube and connector 2 Attach the clip provided in the sales pack approx 10mm from the bottom of the tube Leave the small plastic cap in the end of the tube 3 Screw or push the connector on the end of the tube into the connector on the bag dependent on the type of connector 4 Open the peristaltic pump Position the carton into the machine and push the groove in the connector into the claw on top of the dispense box as far as it will go Concentrate loading contd If the type of connector shown in the photograph below is fitted the top groove in the connector should be used to locate in the claw p Claw to locate in top groove 5 Feed the silicone tube through the peristaltic pump and snap the pump door shut A distinct click will be heard 6 Remove the clamp and plastic cap from the end of the tube and fit over the stub pipe on the valve assembly The tube should reach the bottom of the stub pipe and should not be kinked or creased Tube in correct position Valve assembly 10 Cleaning and maintenance Daily cleaning routine The dispenser should be flushed through with water every day or when the concentrate type is changed A jug should be placed beneath the relevant dispense valve prior to flushing Set the dispenser to Flush mode
8. see page 8 for details and dispense at least 1 litre of water from each valve Empty the drip tray and wash the tray and grill thoroughly with a mild detergent Rinse in clean warm water Wipe down the drip tray area and the exterior cabinet with a clean damp cloth Weekly cleaning routine Remove the concentrate boxes shelf and dispense module Wipe all internal cabinet surfaces with a clean damp cloth Wash the shelf thoroughly using a mild detergent and rinse off in clean hot water Remove both valve assemblies disassemble and wash thoroughly in mild detergent Rinse off in clean hot water and thoroughly dry Apply a small amount of silicone grease provided to the Oring seals and reassemble 11 Removal of the dispense module 8 L The dispense module sits on 4 Lift the front of the dispense pins 2 each side of the inner module upwards It will rotate on cabinet the rear pins i be e J i Pull the dispenser forward with Lift the front and rear of the the front still elevated module until clear of the pins Remove the water and electrical connections by depressing clips 12 Dispense module connections The dispense module has one water and two electrical connections to the rear of the machine When reconnecting the water a positive click should be heard when ful
Download Pdf Manuals
Related Search