9100/9105 User Guide - Nova Alarms, Dundee
Contents
1. 9100 9105 User Guide Compatible Equipment 9026 Remote Keypad white flush 9028 Remote Keypad Polycarbonate 9124 4 Circuit Expansion PCB 9174 8 Circuit Expansion Box 9056 Plug on communicator 9058 Plug on Digital Communicator 9075 Plug on interface 9076 Plug on interface Plug on STU manufactured by others Introduction The Series 9100 Electronic Intruder Alarm System is designed to be fully programmable by the alarm company engineer to suit the particular site requirements and to meet with the individual user needs The system is a four zone alarm system which may be expanded to an eight zone or a sixteen zone system by means of optional plug in expansion printed circuit boards All instructions given in this manual refer to software version 3 0 19 10 89 The panel is supplied with an integral keypad Up to two remote keypads 9028 may be fitted as required An integral speaker is also provided with facilities for an additional two max 9040 16 Ohm internal speakers A Plugon communicator may be fitted to the 9100 control panel The 9105 is an end station version to which you can connect up to three remote keypads Technical Specification Temperature Range 10 C to 40 C Humidity up to 80 noncondensing Dimensions panel 8 zone h x w x d 340 x 260 x 90 mm 16 zone h x wx d 480 x 260 x 90 mm Dimensions Remote Keypad h x w x d 180 x 110 x 40 mm Weight panel 8 zone 4 6 Kg 16 zone 7 6 Kg Weight2. Remote Keypad 340 g Mains supply 220 240V AC with LED indicator Battery Charging Voltage 13 8 V DC with fail monitor Current Consumption 8 zone Quiescent 95 mA Active 500 mA 16 zone Quiescent 190 mA Active 1000 mA Communicator Quiescent 35 mA Active 145 mA Remote Keypad Quiescent 15 mA Communicator Signals Fire AUX Alarm Intruder Open Close PA Trouble Low Battery Spare Channel Line Fault Communication Fault User Commands Set Unset System User code Part Set 1 ENTER User code Chime on off 2 ENTER User code Test Bells 4 ENTER User code Walk Test 5 ENTER User code Repeat procedure to end test Read Log 7 ENTER Omit Zone User code OMIT zone number ENTER repeat zone number ENTER for each zone to be omitted
Download Pdf Manuals
Related Search