USER GUIDE - LOTS Security AB
Contents
1. its internal back up batteries Mains Fail is displayed A Page 9 battery symbol will then appear at the top of the screen cf a pager Part No 9261 8276 Issue 3 0 9 EkoTek Hub Using the Emergency Assist Button Note This feature has to be enabled by the System Supervisor Raising an Alarm In the event of an Emergency or where immediate Assistance is required press the Red Star button Depending on how the EkoTek system is configured this may require a single or a double press Please confirm this with your EkoTek system supervisor On pressing the Red Star button the EkoTek Hub will either beep and or vibrate in sequence with a flashing alert lamp Please note that the precise nature of this acknowledgement is subject to configuration The screen will display the following information indicating that the alarm has been raised and delivered 11 34 AM 12 03 07 HUB Raising Alarm 11 34 AM 12 03 07 HUB Alarm Delivered Cancelling an Alarm At any stage during the initiation of an emergency assist alarm it can be cancelled To cancel the alarm press and hold the button the display will confirm this action with the following message 11 34 AM 12 03 07 HUB Clearing Alarm Part No 9261 8276 Issue 3 0 10 EkoTek Hub Dead Man Alert The EkoTek Hub is equipped with a Dead Man Alert this feature has to be enabled by the System Supervisor The Dead Man Alert operates by initiating an alert to the EkoTek Hu2. to delete this message repeat the procedure If there are no more archived messages the following screen will be displayed No Archived Messages To return to the Standby Screen press and hold the gt button for one second Part No 9261 8276 Issue 3 0 22 EkoTek Hub Delete All Archived Messages To delete all of the archived messages press the button when the m symbol appears at the end of a message The message option screen will be displayed gt View again Delete Delete All Move the pointers to the Delete All item by pressing the W button Select by pressing the button and the pointers will change to question marks View again Delete Delete All If you do not want to delete all the messages press the A or V buttons To confirm that you wish to Delete All the messages press the button again and the screen will briefly display Deleting No Archived Messages To return to the Standby Screen press and hold the button for one second Part No 9261 8276 Issue 3 0 23 EkoTek Hub Set 12 24 Hour Mode This function allows you to set 12 hour to 24 hour mode only From the Standby Screen press the button From the Options Screen press the W button move the pointers to Time and Date and select by pressing the button Options Time and Date Depending on if the Hub is in 12 hour or 24 hour mode the following screen will be displayed Set 12 Hour Mode lt S
3. EkoTek Hub EKO Echo Technology USER GUIDE For EkoTek Hub 9261 8276 Issue 3 0 EkoTek Hub EkoTek Hub CONTENTS Introduction Compliance General User Information EkoTek System Schematic Powering Up the EkoTek Hub Status and Warning Messages Using the Emergency Assist Button Dead Man Alert Receiving a Message Reading a Message Viewing a Message Again Accepting Rejecting amp Deleting Two Way Messages Deleting a Message Delete All Messages Archiving a Message Reviewing Archived Messages Deleting Archived Messages Delete All Archived Messages Set 12 24 Hour Mode Set Time and Date Set Day Night Mode Setting the Alert Options Setting the Message Display Options Setting Auto Delete IP Address Part No 9261 8276 Issue 3 0 3 EkoTek Hub Introduction The EkoTek Hub is an alphanumeric two way messaging device incorporating an emergency calling assist facility The EkoTek Hub is able to receive text messages allows basic responses and provides the ability to store messages for later viewing The high contrast screen is capable of displaying up to 150 characters and all menus are displayed in plain language text Operation of all functions is performed via intuitive menus using 4 tactile buttons and the Red Star button is used for assist or emergency applications To gain full benefit from this product please read this guide carefully Function Control Buttons gt A v S
4. b at pre set time intervals this alert must be acknowledged by single press on ANY of the pager buttons within a pre set time period 11 34 AM 12 03 07 HUB Press any key to cancel Please note that the System Supervisor configures both the frequency of the Dead Man Alert and the required response time If the alert is not acknowledged within the pre set time period the EkoTek Hub will automatically initiate the following alarm escalation sequence 11 34 AM 12 03 07 HUB Raising Alarm 11 34 AM 12 03 07 HUB Alarm Delivered Please note that at any stage during the Dead Man Alert process it is possible to cancel the alarm by pressing the button Part No 9261 8276 Issue 3 0 11 EkoTek Hub Receiving a Message When the EkoTek Hub receives a message the audible alert will activate unless silent mode has been selected The message will be displayed during the alert period Your car will be ready for collection next Monday afternoonm The end of the message is always shown by the character m If the message is very long and cannot be fully displayed the last character will be designated using the following symbol gt This indicates that the message continues onto the next screen Contact Mr Moore of ABC Electronics Tel 01763 246391 The new contract is ready for signature can you sign this To see the rest of the message simply press the button before Wednesday JILLm If the message
5. e only required for delete On receipt of a message press the button directly Or From the Standby Screen press the W button to read the message press the button to acknowledge the message For two way messages the following options screen will be displayed View Again Accept Reject Delete To respond to the message press the W button and move the pointers to Accept Reject or Delete Select the option by pressing the button View Again Accept Reject Delete The pointers will change to question marks requesting confirmation of the action View Again Accept Reject Delete To confirm the action press the button the EkoTek Hub will briefly display the following depending on the action selected For Accept the response is Sending Accept Response For Accept the response is Sending Reject Response Part No 9261 8276 Issue 3 0 16 EkoTek Hub For Delete the response is Deleting Deleting a Message To delete a message press the button when the m appears at the end of the message The message option screens will be displayed depending on the message type received du ind View Again Messages Delete Delete All Archive ror A Way gt View Again Messages Accept Reject Delete Press the W button to move the pointers to the Delete item and select by pressing the button E TWO View Again Messages Delete Delete All Archive For 2 way View Aga
6. elect Enter Scroll Up Scroll Down Emergency Button Button Button Assist Button Select amp Enter Button Denoted by the symbol this button is used to move to and confirm selected options within the Menu Screens and to return to the Standby Screen when pressed for more than 1 second Scroll Up Down Buttons Denoted by the A Up and Y Down Symbols These buttons are used to scroll up and down the Menu Screens Emergency amp Assist Button Denoted by the Red Star button this can be either Single or Double press Operation is dependent upon product configuration and can be enabled or disabled Part No 9261 8276 Issue 3 0 4 EkoTek Hub Compliance This product complies with the requirements of the EU Radio amp Telecommunications Terminal Equipment Directive 99 5 EC FCC amp Industry Canada Statement Of Compliance This device complies with Part 15 of the FCC Rules and Industry Canada Standard RSS 210 Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference that may cause undesired operation Unauthorised modification to this equipment will void the user s authority to continue to operate the device within the scope of the Industry Canada and FCC Part 15 Rules A full technical specification for this product may be obtained from your Multitone representative WEEE Directive amp Product Disposal At the end of its
7. et Time and Date Set Night Mode gt Set 24 Hour Mode lt Set Time and Date Set Night Mode Toggle between the 12 Hour and 24 hour modes by pressing the gt button gt Set 24 Hour Mode Set Time and Date Set Night Mode When the pointer change to question marks press the button to confirm the selection Part No 9261 8276 Issue 3 0 24 EkoTek Hub Set Time and Date To set the time and date press the button when the Standby Screen is displayed The Options Screen will be displayed Move the pointers to Time and Date by pressing the W button Options Time and Date Select this item by pressing the button Set 12 Hour Mode Set Time and Date Set Night Mode Move the pointers to Time and Date by pressing the W button then select by pressing the button Time and Date 12 21 PM 12 09 06 This screen allows you to set the time and date and also the 12 or 24 hour format The currently selected item will flash To select another item for change press the button Each press of the gt button will advance the selection to the next item When the item you wish to change is flashing press the A or Y buttons to increase or decrease its value Once you have set the time and date to return to the Standby Screen press and hold the button for one second Part No 9261 8276 Issue 3 0 25 EkoTek Hub Set Day Night Mode The Day Night function is used to put the EkoTek sys
8. firmed Helenm Part No 9261 8276 Issue 3 0 14 EkoTek Hub Viewing a Message Again While a message is being displayed press the button and the message option screen will be displayed The display response will dependent upon the message type received If it is a single way message the following options will be displayed gt View Again Delete Delete All Archive If itis a two way message the options change to allow initiation of a response see section on accepting rejecting and deleting two way messages View Again Accept Reject Malata Both options allow you to view the message Press the button again to select View Again the EkoTek Hub will display the last message again which will then remain in the memory for you to view in future until deleted 9 05 AM 12 09 06 Read Contact Mr Moore of ABC Electronics Tel 01763 246391 The new contract is ready If the message is in an unread state when View Again is selected the status will change to Read Should the View Again option be used on a message before it has been retrieved from the memory the date and time will be displayed with the message when it is displayed again with the status set to Read Part No 9261 8276 Issue 3 0 15 EkoTek Hub Accepting Rejecting amp Deleting Two Way Messages Accept is now the default entry onto this screen Only a single button press is required to accept reject the message confirmation stag
9. font the date stamp can be suppressed via the programming software when this text size is selected The Backlight can be either enabled or disabled When disabled it will help to prolong battery life The Display Timeout can be set to 8 16 or 32 seconds This option determines the length of time that selected screen remains on display before reverting back to the Standby screen if no buttons are selected The Display Contrast can be increased or decreased When you have finished setting your display options return to the Standby Screen by pressing and holding the button for 1 second Part No 9261 8276 Issue 3 0 30 EkoTek Hub Setting Auto Delete The Auto Delete function allows you to set the maximum number of stored messages excluding those in the Archive memory If the number of messages in the memory exceeds the selected number then the oldest Read message is deleted Should there be no Read Messages then the oldest Un read Message is deleted instead If the Auto Delete value is changed and the number of messages in the memory exceeds the new setting then one message will be deleted per minute until the memory equals the new setting The available options are 1 through to 6 messages To access the Auto Delete function press the button to display the Options Screen Options Time and Date Press the gt button to select Options Move the pointers to Auto delete by pressing the Y button and select u
10. in Messages Accept Reject gt Delete The pointers will change to question marks to show that confirmation of the delete action is required If you do not want to delete press the A or Y buttons To confirm that you wish to Part No 9261 8276 Issue 3 0 17 EkoTek Hub delete the message press the button again and the screen will briefly display Deleting When the current message has been deleted the previously received message will be displayed If you wish to delete this message repeat the procedure above To return to the Standby Screen press and hold the button for one second if there are no more messages the following screen will be displayed No messages Part No 9261 8276 Issue 3 0 18 EkoTek Hub Delete All Messages Note The delete all feature is available to all 1 way messages However for 2 way messages the delete all feature can only be accessed once the message has been viewed and appropriate action taken To delete all the messages press the gt button when the m appears at the end of the message The message option screen will be displayed gt View again Delete Delete All Archive Press the W button to move the pointers to the Delete All item and select by pressing the button View again Delete Delete All Archive The pointers will change to question marks to show that confirmation of the delete action is required If you do not want to delete press the A o
11. is not acknowledged the EkoTek Hub will return to the Standby Screen indicating that a message has been received 3 54 PM 12 03 07 1 Unread Message Part No 9261 8276 Issue 3 0 12 EkoTek Hub As each new message is received it is stored The maximum number of messages that can be stored is 6 To make room for new messages the EkoTek Hub will start to delete the oldest read messages If there are no read messages it will delete the oldest unread message Part No 9261 8276 Issue 3 0 13 EkoTek Hub Reading a Message To read a message press the Y button whilst the EkoTek Hub is in the Standby Screen The most recently received unread message will be displayed 4 38 PM 12 09 06 Unread Your car will be ready for collection next Monday afternoonm The top line shows the time and the date the message was received and to the right message status will be displayed this will either be Unread or Read Press the W button to display the next previously received unread message or select the A button to display the previously viewed message 9 05 AM 12 09 06 Unread Contact Mr Moore of ABC Electronics Tel 01763 246391 The new contract is ready gt Using the A and Y buttons allow navigation of the stored messages Unread messages are sorted in time order and are displayed first followed by the read messages also in time order 2 17 PM 12 09 06 Read You are booked on Flight BA153 Departs at 18 05 ticket con
12. lected the desired alert state press and hold the button for one second and the EkoTek Hub will return to the Standby Screen Part No 9261 8276 Issue 3 0 28 EkoTek Hub Setting the Message Display Options The EkoTek Hub is equipped with display options these can be customised according to your personal requirements To change the message display options press the button from the Standby Screen The Options Screen will now be displayed and select Options by pressing the button Options Time and Date Move the pointers to Display by pressing the W button and select this item by pressing the button Display Auto delete Alert IP Address The following screen will be displayed Font Backlight Display Timeout Contrast The selected item will flash To select the next item press the gt button Each press of the button will advance the selection to the next menu item When the item you wish to change is flashing press the A or Y buttons to change its value Part No 9261 8276 Issue 3 0 29 EkoTek Hub The Font option can be set to 1 2 or 3 e Font option 1 Corresponds to a text size allowing up to 6 lines per screen this text size option may be disabled via the programming software e Font option 2 Corresponds to a text size allowing up to 4 lines of larger text per screen e Font option 3 Corresponds to a text size allowing up to 4 lines per screen of larger text in a bold
13. ng Archived Messages To review your archived messages press the A button whilst the EkoTek Hub is displaying the Standby Screen 10 50 AM 12 09 06 Archive Bring 2 new demo models to the meeting at 11 30 next Tuesday Ruthm The first screen of the most recent archived message will be displayed You may select the archived message that you want to review by pressing the A or Y buttons until the first screen of the message is displayed If the archived message is several screens long you can view subsequent screens by pressing the P button The last screen of the message will contain the m symbol The top line shows the time and date that the message was received and to the right the message status Archive is displayed Part No 9261 8276 Issue 3 0 21 EkoTek Hub Deleting Archived Messages To delete an archived message press the button when the m symbol appears at the end of the message The message option screen will be displayed gt View again Delete Delete All Press the Y button to move the pointers to the Delete item and select by pressing the button The pointers will change to question marks View again Delete If you do not want to delete press the A or Y buttons To confirm that you wish to delete the message press the button again and the screen will briefly display Deleting When the current message has been deleted the previously archived message will be displayed If you wish
14. r Y buttons To confirm that you wish to delete the message press the button again and the screen will briefly display Deleting Having deleted all the messages the following screen will be displayed No Messages Part No 9261 8276 Issue 3 0 19 EkoTek Hub Archiving a Message Note The archive feature is available to all 1 way messages However for 2 way messages the archive feature can only be accessed once the message has been viewed and appropriate action taken Messages may be stored for reference by using the archive facility The EkoTek Hub cannot automatically delete archived messages when the message memory is full only the user can delete messages Atthe end of the message you wish to archive press the button to see the message option screen Move the pointers to the Archive item with the A or Y button View again Delete Delete All Archive Select Archive with the button and the pointers will change to question marks Confirm your selection by pressing the button again The screen will briefly display Archiving When the current message has been archived the screen will show the previously received message If you wish to archive this message repeat the procedure If there are no other messages you may return to the Standby Screen by pressing and holding the button for one second The following screen will be displayed No Messages Part No 9261 8276 Issue 3 0 20 EkoTek Hub Reviewi
15. re being performed Finally the Standby Screen will be displayed 12100 AM 01 01 06 HUB An exclamation mark will flash between the Hours and the Minutes 11 34 AM This indicates that the EkoTek Hub is in the process of starting up Once the EkoTek Hub has started up this will change to a period symbol and the EkoTek Hub will automatically synchronise with the EkoTek network The 4 line of the screen will display EKOTEK once the EkoTek Hub has initialised 11 34 AM 12 03 07 HUB EKOTEK Part No 9261 8276 Issue 3 0 8 EkoTek Hub Status and Warning Messages When the EkoTek Hub is switched on the Standby Screen is displayed This consists of the time and date plus additional status and warning messages A typical screen is shown below 11 34 AM 12 03 07 1 Unread Message Silent EKOTEK The first line is the clock displaying the current time and date the time may be in either a 12 or 24 hour format In the top right hand corner the hub will display Day or Night this is used to indicate the shift mode The second line displays Hub Name or n Unread Message showing how many messages have been received but not viewed The third line shows the status of the alert Silent to warn that the audible alert has been turned off If nothing is displayed then the audible alert is turned on The fourth line normally displays the EkoTek logo however if the AC power is removed and the hub is running on
16. serviceable life this product should not be treated as household or general waste It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment or returned to the supplier for disposal Part No 9261 8276 Issue 3 0 5 EkoTek Hub General User Information Radio Reception The EkoTek Hub has been designed to give optimum performance within the coverage area of the wireless network Hazardous Areas The EkoTek Hub must not be installed in areas where explosive gas or dust products may be present EkoTek Hub Care Protect the EkoTek Hub from liquids extreme temperatures and strong magnetic fields Do not install in a place where it will be exposed to strong sunlight Servicing Should the EkoTeK Hub need repair return it to the designated service agent Do not attempt to open or repair the product as it contains delicate components and requires specialised test equipment Part No 9261 8276 Issue 3 0 6 EkoTek Hub EkoTek System Schematic EkoTek Self Organising amp Repairing Wireless Mesh Network AC Call Fob t 9 Hub With Web Server Pager Lid Includes Personal Security Alarm Part No 9261 8276 Issue 3 0 7 EkoTek Hub Powering Up the EkoTek Hub The EkoTek Hub is powered via a 110 220 or 240 Volt switch mode power supply unit On switching on the EkoTek Hub a message will then be displayed for three seconds whilst self checks a
17. sing the button Alert Display Auto delete IP Address The following screen will then be displayed Auto delete 5 To set up Auto delete press the A or Y button to change the setting and then return to the Standby Screen by pressing and holding the button for one second Part No 9261 8276 Issue 3 0 31 EkoTek Hub IP Address The IP Address function allows you to check the IP address for the EkoTek Hub To access the Auto Delete function press the button to display the Options Screen Options Time and Date Press the button to select Options Move the pointers to IP Address by pressing the W button and select using the button Alert Display Auto delete P Address The pointers will change to question marks press the button Alert Display Auto delete P Address After a few seconds the IP address will be displayed to return to the Standby Screen press the button 192 168 1 2 Part No 9261 8276 Issue 3 0 32 EkoTek Hub Notes Part No 9261 8276 Issue 3 0 33 EkoTek Hub Multitone Electronics plc Multitone House Shortwood Copse Lane Basingstoke Hampshire England RG23 7DH Part No 9261 8276 Part No 9261 8276 Issue 3 0 34
18. tem into day or night shift working operational modes From the Standby Screen press the button From the Options Screen press the W button move the pointers to Time and Date and select by pressing the button Options Time and Date From the Time and Date Options Screen press the W button move the pointers to Set Day Night Mode and press the button to select this option Set 12 24 Hour Mode Set Time and Date Set Night Mode If the Hub is in Day or Night mode the following will be displayed Set Day Mode Set Night Mode Part No 9261 8276 Issue 3 0 26 EkoTek Hub When the pointer change to question marks press the button to confirm the selection Part No 9261 8276 Issue 3 0 27 EkoTek Hub Setting the Alert Options The EkoTek Hub allows full control of how the pager alerts when messages are received the audible alert and vibrate alert can be set to off or on From the Standby Screen press the button to select the Options Screen Options Time and Date Select Options and press the button again The following screen will be displayed use the W button and move the pointers to the Alert option Display Auto delete Alert IP Address Select Alert by pressing the button and the following screen will be displayed Audible Alert To enable or disable Audible Alert option press the A and Y button to select On or Off Once your have se
Download Pdf Manuals
Related Search