User Guide - Invirotech
Contents
1. User Guide Radiodetection AN SPX COMPANY Preface About this guide This guide provides basic operating instructions for the RD7000 locator and transmitter It also contains important safety information and guidelines and as such should be read in its entirety before attempting to operate the RD7000 locator and transmitter It is also highly recommended to register the RD7000 locator and transmitter for the free 3 year extended warranty This guide is intended as a portable quick reference only For detailed instructions please refer to the RD7000 operation manual which can be viewed or downloaded from the Radiodetection website at www radiodetection com Having accessed the Radiodetection website go to Downloads Cable and Pipe Locators User Manuals RD7000 Operation Manual Extended Warranty Thank you for purchasing the RD7000 locator and transmitter RD7000 locators and transmitters are covered by a 1 year warranty Customers can extend the warranty to 3 years by registering each product Registration and extended warranty are free and once registered users will be entitled to free software updates through Centros Manager To be eligible customers must register each product within 3 months of purchase Upon registration customers will receive confirmation of registration by email and this email will include a download key this key will be required for software updates to your RD7000 locator and2. 13 Grande Rue 76220 Neuf March France Tel 33 0 2 32 89 93 60 Fax 33 0 2 35 90 95 58 Email rd sales frGspx com Web http fr radiodetection com Radiodetection Benelux Industriestraat 11 7041 GD s Heerenberg Netherlands Tel 31 0 314 66 47 00 Fax 31 0 314 66 41 30 Email Web http nl radiodetection com Radiodetection Germany Groendahlscher Weg 118 46446 Emmerich am Rhein Germany Tel 49 0 28 51 92 37 20 Fax 49 0 28 51 92 37 520 Email rd sales de spx com Web http de radiodetection com Asia Pacific Radiodetection Asia Pacific Room 708 CC Wu Building 302 308 Hennessy Road Wan Chai Hong Kong SAR China Tel 852 2110 8160 Fax 852 2110 9681 Email rd sales cn spx com Web www radiodetection com Radiodetection China Hongfu Mansion Room 61622 Zheng Ge Zhuang Bei Qi Jia Town Chang Ping District Beijing 102209 China Tel 86 0 10 8975 5540 Fax 86 0 10 8975 5640 Email rd service cn spx com Web http cn radiodetection com Radiodetection Australia Unit 14 5 7 Prosperity Parade Warriewood NSW 2102 Australia Tel 61 0 2 9979 8555 Fax 61 0 2 9979 7733 Email rd sales au spx com Web www radiodetection com Copyright 2010 Radiodetection Ltd SPX Corporation All rights reserved Radiodetection is a subsidiary of SPX Corporation SPX and Radiodetection are trademarks of Radiodetection Ltd and SPX Corporation D
3. e LANG Select your preferred system language CAL Displays the date of the last factory calibration e UNIT Depth readings in metric or imperial units To navigate the locator menu NO af ON First power up the locator Momentarily press the key to enter the menu Use the 9 or arrows to scroll through the menu options Press the key to enter the option s submenu Use the or arrows to select the required selection Press the key to accept your selection and return to the main menu You may continue to scroll through other menu options and make selections using instructions 3 to 6 above or alternatively momentarily press the key to exit the menu and return to the main operating screen Transmitter menu options VOL Adjust the speaker volume from O mute to 3 loudest BT Enable disable or pair Bluetooth connections Tx 3B and Tx 10B only MAX V Set the output voltage to LOW or High MODEL Set the transmitter to work with a specific model of RD7000 locator MAX P Select a specific maximum output power BATT Set battery type ALK NiMH or Lithium lon OPT F Enable or disable SideStepauto LANG Select the transmitter system language BOOST Boost transmitter output for a specified period of time Tx 10 model only FREQ Enable or disable individual frequencies To navigate the transmitter menu Doc Ba O First power up the transmitter Momentarily press the key to ent
4. Folder When you open the folder the Centros Manager executable file will be available To install double click on this file 3 When Centros Manager is installed run from the Windows Start menu under Programs or alternatively use the Centros Manager shortcut on your desk top if you have opted to have this during installation of Centros Manager Note Once Centros Manager is open click on Help to open the Centros Manager Operation Manual eCAL Each time you use a locator you want to be confident that the equipment you are using continues to perform to the same standard as it did when it first left the factory eCAL provides users with the following features which maybe accessed and carried out on site without the need to return the locator to a service centre Check the validation of the RD7000 with the original stored factory calibration results Carrying out a functional check Retrieving original factory calibration certificate or previous eCAL validation certificates alidate your RD7000 you must first carry out the following Register your RD7000 locator at www radiodetection com extendedwarranty See page 3 for more details Purchase an eCAL key at www radiodetection com ecal or alternatively contact your local Radiodetection representative Download Centros Manager at www radiodetection com centrosmanager See page 13 for details Using eCAL to validate the RD7000 1 Connect the RD7000 via the USB
5. Operation Manual Fault finding The RD7000 TL and PL models have the ability to detect sheath cable faults accurately using an accessory A Frame The Tx 3 and Tx 10 transmitters provide a fault finding signal that can be detected with an A frame which occurs whenever there is damage to cable sheaths For a detailed guide to fault finding please refer to the RD7000 operation manual Using accessories Radiodetection have designed a range of accessories to use with the RD7000 locators and transmitters These accessories can be used on a wide range of applications for applying signals to target lines fault finding on cables identifying individual target lines and locating plastic pipes etc Applicable RD4000 accessories are compatible with the RD7000 locator and transmitters For detailed information on accessories please see the RD7000 operation manual or go to www radiodetection com 12 Centros Manager Centros Manager is a Radiodetection PC application which is available as a free download From time to time Radiodetection will release new software for the RD7000 locator and transmitter which may improve performance stability and may include new features The latest software is contained within Centros Manager and to download the latest software you must register for extended warranty see page 3 for details Once registered you will receive an email when new versions of software are available and you may also carry out an
6. aid of the transmitter Active Frequencies Active frequencies are applied directly to the pipe or cable using the transmitter and are the preferred method of applying a signal to a conductor using the transmitter The transmitter can apply a signal using two methods induction and direct connection Induction The transmitter is placed on the ground over or near the survey area You select the appropriate frequency The transmitter will then induce the signal to any nearby metallic conductors In induction mode using higher frequencies is generally recommended as they are induced more easily onto conductors Direct connection In direct connection you connect the transmitter output directly to the pipe or to the conductor of the cable you wish to survey The transmitter will then apply an active frequency signal to the line which you can locate using the locator This method provides the best signal on an individual line and enables the use of lower frequencies which can be traced for longer distances Connecting the transmitter to a pipe or line requires the use of a direct connection lead connected to the accessory socket of the transmitter The red lead is connected to the pipe or cable and the black lead connected to an earth stake to complete the electrical circuit A WARNING Direct connection to live wires is POTENTIALLY LETHAL Direct connections should be attempted by fully qualified personnel only Signal clamps When it i
7. connector inside the battery compartment to a suitable USB port on a PC or laptop Switch on the RD7000 no segments will be lit but the backlight will be on Open Centros Manager and click on Locator eCAL Validation Copy the eCAL key received in your confirmation email when purchasing the eCAL key and click on Load Validation Key icon and paste the eCAL key Click on Run eCAL Validation A message box will automatically open informing you of progress In less than 3 minutes the eCAL Validation Status will be displayed To view or print the certificate locate the serial number of the RD7000 within the Unit Manager window and expand the contents Expand Calibration History and double click on the latest date to display the certificate of validation 14 Using eCAL to retrieve the original factory calibration certificate The original factory calibration results for the RD7000 locator can be retrieved from the unit Each time the RD7000 is calibrated either at Radiodetection or an approved Radiodetection service centre the calibration results are stored within the locator To retrieve the results and print a certificate carry out the following Note You do not need to purchase an eCAL validation key to retrieve the original factory calibration certificate 1 Register your RD7000 locator by going to www radiodetection com extendedwarranty See page 3 for more details Download Centros Manager by going to www radiodetecti
8. eCAL to validate the calibration and functionally test the RD7000 locator Installing Centros Manager Note Before download you are advised to view or download the Centros Manager operation Manual by going to www radiodetection com centrosmanager Note When you install Centros Manager onto a PC the following message may be displayed You need to log in as Administrator If this message is displayed the installation of the program will not complete You will need to log on as an Administrator or ask a user with Administration Rights to install the program on your behalf Having successfully installed Centros Manager the Administrator will need to carry out the instructions in Section 7 1 of the Centros Manager Operation Manual if they wish users without Administrator Rights to use Centros Manager Go to www radiodetection com centrosmanager 2 Click on the link to download Centros Manager and a File Download Window will appear You will have a choice of either Run or Save Run Centros Manager will automatically install Save you will be given the option to save Centros Manager to a destination of your choice Once you select the destination the Centros Manager executable program will download to that destination Once completed you will have the option to Run or Open Folder At this stage Centros Manager has not been installed so you can either select Run and Centros Manager will automatically install or you can choose to Open
9. e RD7000 allows you to work in Metric or Imperial units To select your preferred units of measurement Press the key momentarily to enter the menu Press the or keys until UNIT is displayed Press the key to enter the UNIT submenu Press the or arrows to select Metric or Imperial units Press the key to accept your selection and return to the main menu oa ewU MD gt Press the key momentarily to return to the main operation screen Battery The RD7000 locator and transmitter support Alkaline or Lithium lon batteries It is important that you set the system to match the currently installed battery type to ensure optimal performance and correct battery level indication To set your battery type 1 Press the key momentarily to enter the menu 2 Press the 9 or keys until BATT is displayed 10 Press the locator 5 key or transmitter key to enter the BATT submenu Press the 9 or keys to select the correct battery type Press the key to accept your selection and return to the main menu 2 0 Press the key momentarily to return to the main operation screen Locating pipes and cables Passive Frequencies Passive frequency detection takes advantage of signals that may already be present on buried metallic conductors The RD7000 supports three types of passive frequencies Power Radio and CPS Cathodic Protection Signal You may detect these frequencies without the
10. er the menu Use the or arrows to scroll through the menu options Press the 45 key to enter the option s submenu Use the 9 or arrows to select the required selection Press the key to accept your selection and return to the main menu You may continue to scroll through other menu options and make selections using instructions 3 to 6 above or alternatively momentarily press the key to exit the menu and return to the main operating screen Examples of using the menu selecting options and making changes Power mains frequency locator only Select the correct frequency 50 60Hz for your country or region s national power supply To change power frequency on the locator Press the key momentarily to enter the menu Press the or keys until POWER is displayed Press the locator key to enter the POWER submenu Use the or keys to select the correct frequency Or d 6 Press the key to accept your selection Language To select your preferred menu language Press the key momentarily to enter the menu Press the or keys until LANG is displayed Press the locator key or transmitter aa key to enter the LANG submenu Press the or arrows to select your preferred language Press the key to accept your selection and return to the main menu oa ron Press the key momentarily to return to the main operation screen Depth Measurement Units locator only Th
11. idelines in your country This instrument or family of instruments will not be permanently damaged by reasonable electrostatic discharge and has been tested in accordance with IEC 801 2 However in extreme cases temporary malfunction may occur If this happens switch off wait and switch on again If the instrument still malfunctions disconnect the batteries for five seconds and then reinstall and switch the unit on A WARNING The RD7000 will detect almost all buried conductors but there are some objects that do not radiate any detectable signal The RD7000 or any other electromagnetic locator cannot detect these objects so proceed with caution There are also some live cables which the RD7000 will not be able to detect in Power mode The RD7000 does not indicate whether a signal is from a single cable or from several in close proximity Copyright statement Copyright 2010 Radiodetection Ltd SPX Corporation All rights reserved Radiodetection is a subsidiary of SPX Corporation SPX and Radiodetection are trademarks of Radiodetection Ltd and SPX Corporation Due to a policy of continued development we reserve the right to alter or amend any published specification without notice This document is protected by copyright and may not be copied reproduced transmitted modified or used in whole or in part without the prior written consent of Radiodetection Ltd 16 Trademarks RD7000 RD7000 RD8000 RD4000 flexitrax Sur
12. in Induction Mode 15 A Frame Indicates when the transmitter is in Fault Find Mode 3 and Tx 10 models only Before you begin IMPORTANT Please read this section before you attempt to operate the RD7000 System setup It is important that you set up the system according to your personal preferences and operating requirements for your country before you conduct your first survey You can set the system up using the RD7000 menu as described below Using the menu The RD7000 locator and transmitter menus allow you to select or change system options Once entered the menu is navigated using the arrow keys Navigation is consistent on both the transmitter and the locator When in the menu most on screen icons will temporarily disappear and the menu options will appear in the bottom left hand corner of the LCD Note that when browsing the locator menu the and D keys act as left and right arrows When browsing the transmitter menu the keys act as left and right arrows The right arrow enters a submenu and the left arrow accepts the selection and returns to the previous menu Locator menu options e VOL Adjust the speaker volume from O mute to 3 loudest e BATT Set battery type NiMH or ALK e ALERT Enable or disable StrikeA ert e FREQ Enable or disable individual frequencies e Enable or disable any antenna mode with the exception of Peak e POWER Set national power frequency 50 or 60Hz
13. le between antenna modes Open submenu Prolonged key press toggles between depth and current display on the LCD Locator display icons 10 Til 12 13 14 15 16 127 Bargraph Indicates strength of locate signal and peak marker Signal strength Numerical indication of signal strength and dB reading when using Fault Find mode Proportional Left Right arrows Indicates the location of the line relative to the locator Battery icon Indicates the battery level Volume icon Displays the volume level Fault Find arrows PL and TL models only Radio Mode Indicates when Radio Mode is selected Power Mode Indicates when Power Mode is selected 18 19 20 21 22 23 24 25 Accessory indicator Indicates when an accessory is connected and in use A Frame icon Indicates when the A Frame is connected and in use Operating mode indicator Compass When detecting lines shows the direction of the located cable or pipe relative to the locator When detecting sondes shows the direction of the longitudinal axis of the located sonde relative to the locator Indicates antenna selection Sonde icon Indicates that the unit is set to receive signals from Line icon Indicates that the unit is set to receive signals from lines Depth or current indicator Take care to set Line Sonde appropriately otherwise the Compass display and depth display will be incorrec
14. ntial purpose Radiodetection s liability shall not exceed the purchase price of the Radiodetection product In no event will Radiodetection be liable for any direct indirect special incidental consequential or punitive damages including lost profit whether based on warranty contract tort or any other legal theory Warranty services will be provided only with the original invoice or sales receipt indicating the date of purchase model name and dealer s name within the warranty period This warranty covers only the hardware components of the Radiodetection product Data storage media or accessories must be removed prior to submission of the product for warranty service Radiodetection will not be responsible for loss or erasure of data storage media or accessories Radiodetection is not responsible for transportation costs and risks associated with transportation of the product The existence of a defect shall be determined by Radiodetection in accordance with procedures established by Radiodetection This warranty is in lieu of any other warranty express or implied including any implied warranty of merchantability or fitness for a particular purpose 18 This warranty does not cover a Periodic maintenance and repair or parts replacement due to wear and tear b Consumables components that are expected to require periodic replacement during the lifetime of a product such as non rechargeable batteries bulbs etc c Damage
15. o the product to conform it to national or local technical or Safety standards in countries other than those for which the product was Specifically designed and manufactured X Neglect e g opening of cases where there are no user replaceable parts Xi Accidents fire liquids chemicals other substances flooding vibrations excessive heat improper ventilation power surges excess or incorrect supply or input voltage radiation electrostatic discharges including lighting other external forces and impacts Notes 20 Notes 21 America Radiodetection 154 Portland Road Bridgton ME 04009 USA Tel 1 207 647 9495 Toll Free 1 877 247 3797 Fax 1 207 647 9496 Email rd sales us spx com Web www radiodetection com Pearpoint 72055 Corporate Way Thousand Palms CA 92276 USA Tel 1 800 688 8094 Tel 1 760 343 7350 Fax 1 760 343 7351 Email pearpoint sales us spx com Web www radiodetection com Radiodetection Canada 344 Edgeley Boulevard Unit 34 Concord Ontario L4K 4B7 Canada Tel 1 905 660 9995 Toll Free 1 800 665 7953 Fax 1 905 660 9579 Email rd sales ca spx com Web www radiodetection com Europe Radiodetection Ltd UK Western Drive Bristol BS14 OAF UK Tel 44 0 117 976 7776 Fax 44 0 117 976 7775 Email rd sales uk spx com Web www radiodetection com Radiodetection France
16. on com centrosmanager See page 13 for details Connect the RD7000 via the USB connector inside the battery compartment to a suitable USB port on a PC or laptop Switch on the RD7000 no segments will be lit but the backlight will be on Open Centros Manager and click on Locator eCAL Validation Click on Get Original Calibration Data and a message box will automatically pop up displaying the progress In less than 3 minutes the original calibration certificate will be available to view or print locate the serial number of the RD7000 within the Unit Manager window and expand the contents Expand Calibration History and click on each date When you click on each date the type of certificate whether an eCAL validation or original factory calibration together with date and serial number will be displayed By clicking on this window the certificate will be displayed and you can choose to print this certificate Important notices When reporting any problems to your Radiodetection Dealer or Supplier it is important to quote the unit serial number and the purchase date A WARNING This equipment is NOT approved for use in areas where hazardous gases may be present A WARNING When using the transmitter switch off the unit and disconnect cables before removing the battery pack Reduce audio level before using the earpiece Batteries should be disposed of in accordance with your company s work practice and or any relevant laws or gu
17. or contact your local Radiodetection representative for the latest information regarding the RD7000 or any Radiodetection product Warranty Subject to the conditions set out herein Radiodetection Limited expressly and exclusively provides the following warranty to original end user buyers of Radiodetection products Radiodetection products include Radiodetection Pearpoint Telespec Bicotest Riser Bond Dielectric Mark Products and Warren G V brands Radiodetection hereby warrants that its products shall be free from defects in material and workmanship for one year starting from point of sale to end customer Extensions of this warranty period are available where the same terms and conditions apply Product families include e Cable amp Pipeline Location e Trenchless Water Leak Detectors Pipeline Integrity Pipeline Video Inspection Ground Penetrating Radar Cable Test Cable Dryers To register for an extended warranty 3 years go to www radiodetection com extendedwarranty Statement of warranty conditions The sole and exclusive warranty for any Radiodetection product found to be defective is repair or replacement of the defective product at Radiodetection s sole discretion Repaired parts or replacement products will be provided by Radiodetection on an exchange basis and will be either new or refurbished to be functionally equivalent to new In the event this exclusive remedy is deemed to have failed of its esse
18. or defects caused by use operation or treatment of the product inconsistent with its intended use d Damage or changes to the product as a result of i Misuse including treatment resulting in physical cosmetic or surface damage or changes to the product or damage to liquid crystal displays i Failure to install or use the product for its normal purpose or in accordance with Radiodetection instructions on installation or use ii Failure to maintain the product in accordance with Radiodetection instructions on proper iv Installation or use of the product in a manner inconsistent with the technical or safety laws or standards in the country where it is installed or used v Virus infections or use of the product with software not provided with the product or incorrectly installed software vi The condition of or defects in systems with which the product is used or incorporated except other Radiodetection products designed to be used with the product vii Use of the product with accessories peripheral equipment and other products of a type condition and standard other than prescribed by Radiodetection vii Repair or attempted repair by persons who are not Radiodetection warranted and certified repair houses ix Adjustments or adaptations without Radiodetection s prior written consent including i upgrading the product beyond specifications features described in the instruction manual or ii modifications t
19. s not possible to connect to a pipe or cable using a direct connection lead a transmitter signal clamp can be connected to the accessory socket of the transmitter and the output signal can be applied This is particularly useful with live cables as it removes the need to disable the power and break into the line To locate or indentify individual lines a locator signal clamp can be connected to the accessory socket of the locator and can be clamped around individual cables or pipes that are bunched together Radiodetection supplies a range of signal clamps to suit many applications Stethoscopes At times it may not be possible to use a locator to locate or identify a particular target line due to inaccessibility In these situations a stethoscope antenna should be used to locate or identify individual target lines Radiodetection supplies a range of stethoscopes to suit most applications To use a stethoscope connect it to the locators accessory socket The locator will automatically detect the device and filter out location modes that are irrelevant Locating sondes Sondes are battery powered transmitters that are useful for tracking non metallic pipes and can be fitted to flexrods and inserted into pipes and ducting etc The RD7000 PL DL and TL models can detect a range of sonde frequencies including those transmitted by FlexiSondes and the P350 Flexitrax crawler For a detailed guide on locating sondes please refer to the RD7000
20. t Tx 1 Tx 3 and Tx 10 transmitters Transmitter features 1 Keypad 16 CD Mode indicator Indicates that the 2 LCD transmitter is in Current Direction Mode 3 Removable accessory tray Oe tO nee Only 17 Voltage warning indicator Indicates Transmitter keypad that the transmitter is outputting potentially hazardous voltage levels 4 Power key Switches the unit on and off Opens the transmitter menu 18 Volume icon Displays the volume level 19 Pairing icon Tx 3B and Tx 10B only For use with RD8000 locators only 20 Bluetooth icon Tx 3B and Tx 10B only For use with RD8000 locators only 5 f key Selects frequency Menu navigation key 6 Upand down arrows Adjusts the output level signal Scrolls through the menu options 7 Measure key Toggles measurement display between volts and current or resistance and power Note displayed measurements are based on the currently selected mode or the attached accessory if applicable Opens a submenu Transmitter screen icons 8 Battery icon Indicates the battery level 9 Selected operation mode 10 Standby icon Appears when the transmitter is in Standby Mode 11 Output level Displays transmitter output level 12 Clamp icon Indicates when a clamp is connected 13 External 12V DC icon Appears when the transmitter is powered from an external 12V DC source 14 Induction indicator Appears when the transmitter is
21. transmitter When new software is released registered users will receive a notification email that links to the new software download page on the Radiodetection website To register for extended warranty go to www radiodetection com extendedwarranty eCAL eCAL is a novel Radiodetection technique that allows the user to validate the original factory calibration of the RD7000 locator providing the user with the confidence that the locator continues to meet its original factory calibration eCAL also carries out a functional test on the locator providing the user with the confidence that the locator continues to provide the same performance as it did when it first left the factory eCAL can be carried out on site without the need to return the locator to a service centre saving time and expense Each time the locator passes eCAL the user can view or print a dated eCAL validation certificate For a more detailed explanation of eCAL please go to the eCAL section on page 14 RD7000 locator 10 11 12 A MA wi NY MN IAN IAN IAN IZ 18 19 20 21 22 23 Locator features 4 5 Keypad LCD screen Battery compartment USB connector inside Accessory socket Headphone jack Locator keypad 6 Power key Switches the unit on and off Opens the locator menu f key Selects frequency Closes submenu Up and down arrows Adjusts the signal gain Scrolls through menu options Antenna key Togg
22. ue to a policy of continued H H e development we reserve the right to alter or amend any published specification X a 10 etection without notice This document may not be copied reproduced transmitted modified or used in whole or in part without the prior written consent of Radiodetection Ltd AN SPX COMPANY 90 UGO088INT O1
23. veyCERT StrikeA ert SideStep and eCAL are trademarks of Radiodetection Ltd FCC and Industry Canada statements This device complies with part 15 of the FCC Rules Operation is subject to the following conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment To comply with the FCC RD explore compliance requirements this device and its antenna must not be co located or operated in conjunction with any other antenna or transmitter Training Radiodetection provides training services for most Radiodetection products Our qualified instructors will train equipment operators or other personne at your preferred location or at Radiodetection headquarters For more information go to www radiodetection com or contact your local Radiodetection representative Service and Maintenance The locator and transmitter are designed so that they do not require regular calibration However as with all safety equipment it is recommended that they are serviced at least once a year either at Radiodetection or an approved repair center Radiodetection products including this user guide are under continuous development and are subject to change without notice Go to www radiodetection com
Download Pdf Manuals
Related Search