Home

User's Guide

Contents

1. 6 VOX phone Rotate the Jog Dial to select one of three speed dial numbers and you hear a voice prompt saying Speed dial Speed dial 3 Call a phone number you want to assign and you will hear a voice Audio Multitasking prompt saying Save speed dial The phone number is automatically assigned to the selected speed dial number Then Universal intercom basa the phone call will hang up before being connected pairing 4 Toexitthe menu rotate the Jog Dial clockwise or counter clockwise SERERE id c i until you hear a voice prompt saying Exit and tap the Phone Button to confirm You will then hear a voice prompt saying Exit Sidetone If any button is not pressed within 1 minute the 20S will exit the configuration menu and go back to stand by mode Voice prompt VOX phone HD intercom 41 SENA 205 Note 1 After assigning a phone number to one of three speed dials you can continually assign another phone number to the rest of two speed dials 2 You can also assign phone numbers for speed dialing by using the Device Manager software or the Sena Smartphone App Please visit the Sena Bluetooth website at www sena com for more information 20 2 Enabling Disabling Audio Multitasking Voice Prompt Audio multitasking Factory Default Enable Enable Tap the Phone Button
2. Disable Tap the Jog Dial Audio Multitasking allows you to have an intercom conversation while simultaneously listening to music FM radio or GPS instructions The overlaid audio is played in the background with reduced volume whenever there is an intercom conversation and will return to normal 20 3 Setting Intercom audio Overlay Sensitivity Voice Prompt Intercom audio overlay sensitivity Factory Default 5 Level Adjustment Rotate the Jog Dial 1 10 Apply Tap the Phone Button When the Audio Multitasking setting is enabled if you talk over the intercom while music is playing then the music volume will be lowered to play in the background You can adjust the intercom sensitivity to activate this background music mode To adjust this intercom sensitivity tap the Phone Button when you hear the voice prompt Intercom audio overlay sensitivity Rotate the Jog Dial to adjust the sensitivity has the highest sensitivity 1 sensitivity and you will hear evel Level 1 has the lowest sensitivity and level 10 Tap the Phone Button to save the level of the voice prompt Save Before you con firm the selected level you can test its sensitivity by saying a word out lou dorb owing into the mic If your voice is larger volume once the conversation is finished If this feature is disabled any incoming or outgoing intercom will interrupt your audio channel than the sen
3. Mobile Phone Pairing Mobile Phone Pairing GPS Pairing Mobile Phone Intercom Pairing Mobile Phone Bluetooth GPS 0 Pairing zumo 220 350 550 660 665 TomTom Rider P Motorcycle Bluetooth Audio System l A BMW R1200RT K1600GT K1600GTL A o A n vs m Mobile Phone Pairing iri Mobile Phone phone call Motorcycle Bluetooth Audio System listening to music GPS GPS instruction e Intercom GPS Pairing Pairing Motorcycle Bluetooth Audio System Bluetooth GPS 51 SENA 205 Case 7 Bluetooth Pairing Procedure 6 Mobile Phone Pairing Second Mobile Phone Pairing Intercom Pairing Usage E Mobile Phone e Mobile Phone phone call e SR10 two way radio GPS guidance Radar detecting signal Pairing Intercom P An i Phone Pairing Two way Radio tlm 29 Intercom Pairing A Radar Detector Mobile Phone 52 205 SENA Case 8 Mobile Phone GPS Mobile Phone Pairing Bluetooth GPS 6 Mobile Phone Pairing j ii L Mobile Phone Pairing Intercom Pairing MP3 Player Bluetooth Pairing Procedure GPS Mobile Phone Pairing Mobile Phone Pairing Mobile Phone Pairing Intercom Pairing Bluetooth GPS zumo 220 350 550 660 665 TomTom Rider Usage e GPS phone call GPS instruction MP3 Player listening to music Intercom 53 SENA 20S Case 9 Bluetooth Pairing Procedure 0 Mob
4. To track forward or track back rotate while pressing down the Jog Dial clockwise or counter clockwise Please refer to chapter 15 for more information on intercom connections 24 Note 1 Audio Multitasking must be enabled to use music sharing Please refer to section 20 2 for more details on the Audio Multitasking feature 2 Both you and your intercom friend can remotely control music playback during music sharing such as track forward and track back 3 When you have an incoming call make a phone call or hear the turn by turn voice instruction of GPS during music sharing the function will be paused 9 GPS NAVIGATION If you pair a Bluetooth GPS to the 20S as described in section 5 4 Bluetooth GPS Navigation Pairing you can hear the voice instruction of the GPS while having an intercom conversation The GPS voice instruction does not interrupt intercom conversations Voice GPS Pairing Instruction HFP gy 4 Intercom Do 4 Mobile Phone Intercom Smart Phone Pairing 20S Pairing Intercom Friend Intercom and GPS voice instruction 205 SENA 10 SENA SR10 TWO WAY RADIO ADAPTER As described in section 5 5 you can use a two way radio and the 20S Bluetooth intercom simultaneously by using the Sena SR10 a Bluetooth Two way Radio Adapter along with the 20S Incoming audio from the two way radio will not interrupt an intercom conversation but is heard in background This is useful when you have an intercom c
5. occurring due to any careless behavior of yours or others which may occur during the use of this product You are responsible for ensuring that your medical condition permits usage of the product and that you are in sufficient physical condition for using any device which can be used with it In addition you must ensure that the product does not limit your abilities and that you are able to use it safely You must be an adult who can take responsibilities for using the product You must read and understand the following warnings and alerts Sena together with employees managers partners subsidiaries representatives agents supporting firms and suppliers sole sellers of Sena collectively referred to as the company recommend that before using the product and similar devices of any brands including its derivative models you collect any relevant information in advance and be entirely prepared in terms of weather traffic situation and road conditions When you use the product while you operating any vehicle or equipment such as motorcycles scooters mopeds ATVs or quad bikes hereinafter called as transportation means you must take complete caution regardless of the location of such operation Use of the product on the road may cause such risks as fracture serious disability or death Risk factors which may occur when you use the product may be due to errors of the manufacturer its agents or third p
6. 3 Bluetooth eos Motorcycle Bluetooth Communication System 7 CY 3 dia amp 22 ribe 4 55 S amp D wet home inter Multi gi Playback Control Advance Use While vidua Firmware Intercom Intercon com Audio asking tor Music Sharing joice A2DP AVRCP Noise Control on atile Jog Dial Speed Dial Audio Booster Charging Volume Control Upgradeable SENA www sena com User s Guide SENA 205 1998 2014 Sena Technologies Inc All rights reserved Sena Technologies Inc reserves the right to make any changes and improvements to its product without providing prior notice Sena is a trademark of Sena Technologies Inc or its subsidiaries in the USA and other countries 205 SMH10 SMH5 SMH5 FM SPH10 SPH10H SPH10H FM SMH10R SPH10S SPH10H SR10 SM10 EXPAND Bluetooth Pack for GoPro and PRISM are trademarks of Sena Technologies Inc or its subsidiaries These trademarks may not be used without the express permission of Sena GoPro is a registered trademark of Woodman Labs of San Mateo California Sena Technologies Inc Sena is not affiliated with Woodman Labs The Sena Bluetooth Pack for GoPro is an after market accessory specially designed and manufactured by Sena Technologies Inc for the GoPro Hero3 allowing for Bluetooth capabilities The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Sena is under license iPhone iP
7. Pairing with the Sena SR10 Bluetooth Two way Radio Adapter m 6 PAIRING WITH SELECTIVE PROFILE A2DP STEREO OR HANDSFREE bise 1 6 1 A2DP Stereo Music Only 6 2 HFP for Phone Call Only 7 MOBILE PHONE CALL MAKING AND ANSWERING 7 1 Mobile Phone Call Making and Answering 7 2 Speed Dialing 7 8 Intercom and Mobile Phone Call ES 14 INTERCOM PAIRING tint i nti etn tenerent 14 1 Pairing with Other 20S Headsets for Intercom Conversation 14 2 Pairing with Other Sena Headset Models for Intercom Conversation 15 TWO WAY amp MULTI WAY INTERCOM Mist 31 15 1 Two way Intercom 15 2 Multi way Intercom 15 3 Intercom Failure 15 4 Intercom Reconnection 16 THREE WAY CONFERENCE PHONE CALL WITH H INTERCOM PARTICIPANT 35 17 GROUP INTERGOM 2 terne tenent intet reti te better eec 36 SENA 205 18 19 20 21 22 23 24 25 CERTIFICATION AND SAFETY APPROVALS UNIVERSAL INTERCOM 18 1 Universal Intercom Pairing 18 2 Two way Universal Intercom 18 3 Three way Universal Intercom 18 4 Four way Universal Intercom 38 FUNCTION PRIORITY 20S CONFIGURATION SETTINGi c cir 40 20 1 Assigning Speed Dial steels 20 2 Enabling Disabling Audio Multitasking quali 42 20 3 Setting Intercom audio Overlay Sensitivity 20 4 Enabling Disabling Navigation App Support 2
8. SENA 5 4 2 GPS Pairing as Mobile Phone If a GPS is not only used for turn by turn voice instructions but also is your preferred Bluetooth stereo music source you can pair the GPS to the 20S by following the simple procedures in 5 1 Mobile Phone Pairing However since some GPS systems support mobile phone bridging over Bluetooth you can pair the mobile phone to the GPS to use your mobile phone When you do this the 20S thinks the GPS is a mobile phone so you can no longer pair your mobile phone to the 20S directly Please refer to the user s guide of your GPS for details HFP Mobile Phone HFP A2DP Mobile Phone Pairing y GPS Pairing as Mobile Phone Note You have to use a motorcycle specific GPS which transmits turn by turn voice instruction to the headset by Bluetooth Most automotive GPS systems don t have this feature 5 5 Pairing with the Sena SR10 Bluetooth Two way Radio Adapter The Sena SR10 is a Bluetooth two way radio adapter for group communication and uses HFP as do most motorcycle specific GPS navigation systems If you pair the 20S with a SR10 by second mobile phone pairing the 208 is able to have two HFP devices at the same time a mobile phone and the Sena SR10 1 Turn on the headset and press the Jog Dial for 6 seconds until the red LED is rapidly flashing and you hear multiple beeps 2 Within 2 seconds tap the Phone Button again then the LED turns to blue flashing and the beeps turn
9. a voice prompt from the 20S saying Your headset is paired If the pairing process is not completed within three minutes the 208 will return to stand by mode 5 1 2 NFC Mobile Phone Pairing You can quickly pair your mobile phone using NFC Near Field Communication technology with your NFC enabled mobile phone 1 2 3 Make sure that your mobile phone has the NFC function turned on and that the phone screen is active Turn on the 20S and remove the main unit from the clamp unit Place your mobile phone over the back side of the 208 so that the NFC detection area of each device touches each other Follow the pairing instructions that appear on your phone If a passcode is required enter 0000 The mobile phone confirms that pairing has completed and the 208 is ready to use Reattach the 208 to the clamp unit 205 SENA 5 2 Second Mobile phone Pairing 6 If you want to pair the Sena SR10 Bluetooth adapter please refer Typical Bluetooth headsets can connect with only one HFP Hands to the section 5 5 Pairing with the Sena SR10 Bluetooth Two Free Profile device but a second mobile phone pairing allows the way Radio Adapter headset to connect with two HFP devices at the same time So when you already have a mobile phone connected with the 20S you can also pair and connect a second mobile phone or other HFP devices such as Sena SR10 Bluetooth adapter 1 To pair the second mobile phone press th
10. energy and if not installed and used in accordance with the instructions be preset Tap the Phone i High tone may cause harmful interference to radio communications However there is scanning Button RA no guarantee that interference will not occur in a particular installation If this Press the Phone High tone equipment does cause harmful interference to radio or television reception Button for 12 Solid red a r actory rese i Fact t esconde double beeps which can be determined by turning the equipment on and off the user is Heset Tap the Jog Dial within 5 seconds encouraged to try to correct the interference by one or more of the following F Press the Reset measures ault reset Button Reorient or relocate the receiving antennae Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help 57 SENA 205 FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment End users must follow the specific operating instructions for satisfying RF exposure compliance The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi transmitter product procedures FCC Caution Any chan
11. headset B in your intercom group For example you A may start an intercom conversation with non Sena Bluetooth headset B The non Sena Bluetooth headset B may also start an intercom call with you A a A A B C 37 SENA 205 3 38 The other 20S C may join the intercom by making an intercom call to you A Now you A non Sena Bluetooth headset B and the other 20S C are having a three way intercom u RU B You may disconnect three way Universal Intercom using the same way as you do in normal three way intercom Please refer to section 15 2 2 End Three way Intercom C 18 4 Four way Universal Intercom You may make a four way Universal Intercom connection with a couple of different configurations 1 three 20Ss and one non Sena Bluetooth headset or 2 two 20Ss and two non Sena Bluetooth headsets You may have a couple of other four way Universal Intercom configurations 1 your headset A a non Sena Bluetooth headset B another 20S C and a non Sena Bluetooth headset D 2 your headset A a non Sena Bluetooth headset B and two other 20S headsets C and D You may make the four way Universal Intercom call the same way as a normal four way intercom call 18 4 1 Four way Universal Intercom Case 1 Two 20S headsets A and C and two non Sena Bluetooth headsets B and D 1 You A may start an intercom conversation with the non Sena Bluetooth headset B B
12. hear a voice prompt Universal intercom pairing Please refer Sensitivity to section 18 1 for details on Universal Intercom Rotate the Jog Dial Navigation App D Enable Disable once more to exit from pairing mode Support 20 12 Exit Voice Configuration Menu Moti n Sensor Execute N A Sensitivity VOX Phone Enable Disable HD Intercom Enable Disable Voice Prompt Exit configuration Factory Default N A Execute Tap the Phone Button Voice Prompt Enable Disable To exit voice configuration menu and get back to stand by mode Sidetone Enable Disable rotate the Jog Dial until you hear a voice prompt saying Exit configuration and tap the Phone Button to confirm Tapping the Jog Universal Intercom Dial is not available for this setting Pairing None N A Delete All Pairings Execute N A Exit Configuration Execute N A Voice Configuration Menu amp Button Operations 45 SENA 205 46 21 RESET TO FACTORY DEFAULT SETTINGS To restore the 20S to factory default settings press and hold the Phone Button for 12 seconds until the LED shows solid red and you hear double beeps You will hear a voice prompt saying Factory reset Within 5 seconds press the Jog Dial to confirm reset The headset will be restored to factory setting and switched off automatically You will hear a voice prompt saying Headset reset good bye If you press the Phone Butt
13. intercom a f V First Friend Second Friend C 15 2 2 End Three way Intercom When you are a member of an active three way intercom you can completely terminate the intercom or just disconnect an intercom connection with one of your active intercom friends 1 Press the Jog Dial for 2 seconds until you hear double beeps to terminate three way intercom completely It terminates both intercom connections with B and C 2 Tap or double tap the Jog Dial to disconnect intercom connection with one of the two intercom friends accordingly For example by single tapping the Jog Dial you can just terminate the intercom connection with the first intercom friend B However you still have the intercom connection with your second intercom friend C Jog Dial Operation Result Press for 2 Disconnect B amp C Single tap Disconnect B Double tap Disconnect C 15 2 3 Start Multi way Intercom You can have multi way intercom with up to seven other 20S users by creating an intercom chain Both the head and the tail of the chain can add new participants L 3 4 52 Y Q First Friend Second Friend B C For example if you have a three way intercom set up the new participant D can be added to either B the head or C the tail If D were added to C then D becomes the new tail of the chain If D were added to B then D becomes the new head In this way an intercom chain can hol
14. to high tone double beeps You will hear a voice prompt saying Second mobile phone pairing 3 Turn on the SR10 and follow the SR10 s Bluetooth Headset Pairing procedure to complete the process Please refer to the SR10 user s guide for details 4 When the pairing is completed you will hear a voice prompt saying Your headset is paired SENA 205 5 If the pairing process is not completed within three minutes the 208 will return to stand by mode The incoming audio from the two way radio via SR10 is heard in the background while having an intercom conversation or a mobile phone call You can listen to music answer a mobile call have an intercom conversation and use a two way radio via the SR10 for group communication as shown in the figure below A GPS system or a radar detector which has a headphone jack or audio line out could be connected to the SR10 by a wire The GPS voice instruction or the radar detector alarm is also heard in the background via the SR10 while having an intercom conversation or a phone call Please refer to the SR10 User s Guide for details Two way Radio Smart Phone A Wired BER Mobile Phone Connection A2DP Pairing w amp di Second Mobile Phone Pairing Ww ag i Wired Connection Sena SR10 Wired Connection Radar Detector Parallel Connection of SR10 and Mobile Phone by Bluetooth Second Mobile Phone Pairing 205 SENA 6 PAIRING WITH SELECTIVE PRO
15. 208 is compliant with the Bluetooth 4 0 supporting the following profiles Headset Profile Hands Free Profile HFP Advanced Audio Distribution Profile A2DP and Audio Video Remote Control Profile AVRCP Please check with the manufacturers of other devices to determine their compatibility with this headset A Please read this user s guide carefully before using the headset Also check www sena com for the latest version of the users guide and additional information related to Sena Bluetooth products The 208 features Bluetooth 4 0 Dual Bluetooth module communication system Audio Multitasking Multi way intercom up to 8 connections Group Intercom e Bluetooth intercom up to 2 0 kilometers 1 2 miles e Smartphone App for iPhone and Android Universal Intercom Advanced Noise Control Intuitive voice prompts and voice commands HD quality crystal clear and natural sound Bluetooth Audio Recording Versatile functions using motion sensor technology All in one helmet clamp kit Built in FM radio tuner with a station scan and save function Bluetooth pairing for dual mobile phones e Bluetooth handsfree for Bluetooth mobile phones Bluetooth stereo headset for Bluetooth audio devices such as MP3 players Bluetooth stereo headset for Bluetooth GPS navigations Firmware upgradeable in open terrain Key Specifications Bluetooth 4 0 e Supporting profiles Headset Pro
16. 35 SENA 205 17 GROUP INTERCOM Group Intercom allows you to instantly create a multi way conference intercom of up to eight participants You can create and start Group Intercom through your Smartphone App 1 Start your Smartphone App and go to Group Setting 2 Browse your friends and select up to seven other people you want to group with 3 Check your friends and press Save to My 20S on the screen 4 Press Connect on the screen or the Ambient Mode Button for 1 second to begin Group Intercom 36 18 UNIVERSAL INTERCOM You can have an intercom conversation with non Sena Bluetooth headsets using the Universal Intercom function Non Sena Bluetooth headsets can be connected to the Sena Bluetooth headset if they support the Bluetooth Hands Free Profile HFP The working distance may differ depending on the performance of Bluetooth headset that it is connected to In general it is shorter than normal intercom distance since it uses the Bluetooth handsfree profile 18 1 Universal Intercom Pairing The 208 can be paired with non Sena Bluetooth headsets for Bluetooth intercom conversation You can pair the 20S with only one non Sena Bluetooth headset so if you pair with a different non Sena Bluetooth headset the previous pairing list will be removed 1 Turn on the 20S and a non Sena Bluetooth headset that you want to pair with 2 Press the Jog Dial for 12 seconds to enter the configuration menu Rota
17. Bluetooth Wireless Stereo The Bluetooth audio device must be paired with the 20S by following the Bluetooth Stereo Device Pairing procedures described in the section 5 3 The 20S supports the Audio Video Remote Control Profile 205 SENA AVRCP so if your Bluetooth audio device also supports the AVRCP you can use the 20S to remotely control music playback Not only can you adjust the volume but you can also use the functions such as play pause next track and previous track If the Audio Multitasking feature is enabled you can listen to the music while having an intercom conversation 1 To adjust the volume rotate the Jog Dial 2 To play or pause music press and hold the Jog Dial for 1 second until you hear a double beep 3 To track forward or track back rotate while pressing the Jog Dial clockwise or counter clockwise Note Bluetooth music is available only when the MP3 port remains open Please make sure the audio cable is unplugged from the clamp unit to play music by Bluetooth 8 3 Music Sharing You can start sharing music with an intercom friend using Bluetooth stereo music during a two way intercom conversation 1 To start or terminate sharing music press and hold the Jog Dial until you hear triple beeps during an intercom conversation and you will hear the voice prompt saying Music sharing 23 SENA 205 2 You and your intercom friend will listen to or terminate sharing music
18. D 205 SENA The other 20S C may join the intercom by making an intercom call to you A a L I A C Pas 8 D adl The non Sena Bluetooth headset D may join the three way intercom by making an intercom call to the 20S C 7 A C NC Pad T B D 4 Nowtwo 208 headsets A amp C and two non Sena Bluetooth headsets B amp D are connected with the four way Universal Intercom A C da B D You may disconnect a four way Universal Intercom using the same way as you do in a normal four way intercom Please refer to section 15 2 4 End Multi way Intercom 18 4 2 Four way Universal Intercom Case 2 Three 20S headsets A C and D and one non Sena Bluetooth headset B The procedure is the same as case 1 described in section 18 4 1 B D 39 SENA 205 19 FUNCTION PRIORITY The 20S operates in the following order of priority highest Ambient mode Mobile phone Voice command mode by double tapping lowest ntercom Stereo mus Music shari FM Radio ic by audio cable ng by Bluetooth stereo music Bluetooth stereo music A lower priority function is always interrupted by a higher priority function For example stereo n and intercom conve call 40 rsation is in nusic is interrupted by intercom call terrupted by incoming mobile phone 20 20S CONFIGURATION SETTING You can set the configuration of the 20S by the voice menu instruc
19. Double tap the Phone Button Then the current station frequency moves upward to find other station frequencies If the tuner finds a station it stays at the station frequency for 8 seconds then scanning to the next station frequency Scan function stops when you double tap the Phone Button again To save a station while scanning frequencies tap the Phone Button when at that station You will hear a voice prompt from the 20S saying Save preset The station will be saved as the next preset number All stations preset during Scan will overwrite previously set stations 11 5 Temporary Preset With the temporary preset function you may temporarily preset stations automatically without changing the existing preset stations Tap the Phone Button three times to automatically scan for 10 temporary preset stations The temporary preset stations will be cleared when the system is powered off 11 6 Region Selection You can select proper FM frequency region from the Device Manager With the region setting you may optimize seek function to avoid unnecessary frequency range Factory default worldwide Region Frequency range Worldwide 76 0 108 0 MHz Americas 87 5 107 9 MHz Asia 87 5 108 0 MHz Australia 87 5 107 9 MHz Europe 87 5 108 0 MHz Japan 76 0 90 0 MHz 27 SENA 205 12 AMBIENT MODE 13 VOICE COMMAND You can hear the ambie
20. FILE A2DP STEREO OR HANDSFREE f you have a MP3 stereo music phone such as a smartphone sometimes you may need to selectively use the 208 for A2DP stereo music only or for mobile phone handsfree only These instructions are for advanced users who want to pair the 20S to their smartphones only with one selective profile A2DP stereo for music or HFP for phone calls f you have previously paired a mobile phone to the 20S you must clear the previous paring list on both devices the mobile phone and 208 To clear the pairing list on 20S please do a factory reset or follow the pairing list clearing procedure described in this manual To clear the pairing list on the mobile phone please refer to the mobile phone manual For most smartphones delete the Sena 208 from the list of Bluetooth devices in the settings menu 6 1 A2DP Stereo Music Only 1 Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps 2 Within 2 seconds tap the Jog Dial again then the LED turns to 3 4 red flashing and the beeps turn to double mid tone beeps You will hear a voice prompt saying Media selective pairing Search for Bluetooth devices on your smartphone Select the Sena 20S in the list of devices detected on your phone Enter 0000 for the PIN Some smartphones may not ask for PIN 6 2 HFP for Phone Call Only T Turn on the headset and press the Phone Bu
21. NA Store the battery at temperatures of 15 C 25 C 59 F 77 F Higher or lower temperatures may reduce the capacity and life of the battery or may cause temporary non operation Do not use the product in sub zero temperature because it may cause serious reduction of the battery performance If you apply heat to the battery or throw it into fire it may explode Do not use the product with a damaged battery It may explode and or cause accidents Never use a damaged charger It may explode and or cause accidents Battery life may vary depending on conditions environmental factors functions of the product in use and devices used with it PRODUCT WARRANTY AND DISCLAIMER Limited Warranty Limited Warranty Sena Technologies Inc Sena guarantees the product quality based on the technical specification stated in the product manual and data regarding product warranty Here product warranty extends to the product only Sena will not be liable for any loss damage of human life or loss of property which may result from using the product beyond defective parts or flaws that occur due to problems in manufacture Warranty Period Sena guarantees free of charge replacements of defective parts of the product or flaws that may have occurred due to problems in manufacture for a period of 2 years from the date of initial purchase Termination Quality warranty of the product becomes effective on the date of initial purc
22. and refrain from using the product In a place where wireless communication is prohibited electromagnetic waves may cause hazards or accidents Do not use the product near hazardous explosives When there are near any explosion hazards turn off the power and heed any regulations instructions and signs in the area 60 When using the product drive at a low speed slower than 35km h for safety In addition be certain to conform to laws regarding the use of communications devices while driving Do not put the product where it may hamper the driver s vision or manipulate it while driving This may cause traffic accidents Before driving fasten the product to the helmet and double check that it is fastened Separation of the product while driving may cause damage to the product or accidents If the product is damaged stop using it immediately It may cause damage explosion or fire Battery This product has an irreplaceable rechargeable battery inside Therefore when using the product make sure to adhere to the following Never separate the battery from the product as this may damage the product The battery performance may be reduced over time with usage In recharging the battery make sure to use an approved charger provided by the manufacturer Use of a non approved charger may cause fire explosion leakage and other hazards may also reduce the life time or performance of the battery 205 SE
23. arties which are involved in the manufacturing Risk factors which may occur when you use the product may be unforeseeable Therefore you must take full responsibility for any damage or loss caused by all risk factors which may occur when using he product When you use the product use good judgment never use it under the influence of alcohol 205 SENA 6 You must read and completely understand all terms and conditions of legal rights and warnings that are involved in using the product In addition usage of the product constitutes acceptance of all terms and conditions regarding waiver of rights Warranty Exclusions Reasons for Limited Liabilities If you do not return the product after purchasing it you relinquish all rights to liabilities loss claims and claims for reimbursement of expenses including attorney s fees Therefore Sena will not be liable for physical injury death or any loss or damage of transportation means possessions or assets which belong to you or third parties that may have occurred while you use the product Further Sena will not be liable for any substantial damage not related to the condition environment or malfunction of the product All risks related with the operation of the product depend entirely on the user regardless of its use by the initial purchaser of a third party Use of this product may violate local or national laws In addition be aware once a
24. d stop the intercom conversation or 2 reject the phone call and stay on the intercom conversation 21 SENA 205 22 a To answer the phone call and stop the intercom conversation tap the Jog Dial or the Phone Button The VOX Phone feature does not work if you are connected to intercom When you hang up the phone call the intercom will automatically be recovered b To reject the phone call and stay on the intercom conversation press the Jog Dial for 2 seconds until you hear a beep Unlike other motorcycle Bluetooth headsets this prevents a user from being dropped out of an intercom conversation by an incoming mobile call When you have an incoming intercom call during a mobile phone call you will hear 4 high tone beeps alerting you that there is an incoming intercom call You will also hear a voice prompt saying Intercom requested In this case the intercom call does not override the mobile phone call because intercom has lower priority than mobile call You have to hang up the mobile phone call to make or receive an intercom call 8 STEREO MUSIC You can listen to stereo music in two ways with the enclosed stereo audio cable or by Bluetooth wireless stereo 8 1 By Stereo Audio Cable Plug your stereo MP3 player directly to the 20S by using the enclosed 2 5mm to 3 5mm stereo audio cable To adjust the volume rotate the Jog Dial on the headset You may adjust the volume on the MP3 player also 8 2 By
25. d up to eight people 33 SENA 205 i Na S A da d Da 7 Ne x A Na y S Pa First Friend Second Friend First Friend Second Friend B C B C Please note that each participant s intercom friends are the ones Single Tap adjacent to each other 15 2 4 End Multi way Intercom L L L You can completely get out of the multi way intercom or just disconnect a Y a part of the chain 9 Z N 1 Press the Jog Dial for 2 seconds until you hear double beeps TRS y tem to terminate multi way intercom It terminates the intercom y wy connections between you A and all participants in the chain id uu pem 2 Single tap or double tap the Jog Dial to disconnect intercom ouble Tap connection between one of the two intercom friends A single tap will disconnect the intercom connection between you A and B Rest of the connection of the chain will be preserved Likewise double tap will disconnect the intercom connection between you A and C while preserving rest of the connections Single tap Disconnect participants chained to B Double tap Disconnect participants chained to C Jog Dial Operation Result Press and hold for 1 Disconnect all participants 34 205 SENA 15 3 Intercom Failure When you try to start an intercom conversation with an intercom friend who is already having a multi way intercom with other riders or a mobile phone call you will hear a low tone double beep sign
26. e always on Voice prompts for configuration setting menu Voice prompts for battery level Indicator Voice prompts for factory reset 44 Voice prompts for speed dial Voice prompts for FM radio functions 20 9 Enabling Disabling Sidetone Sidetone Disable Voice Prompt Factory Default Enable Tap the Phone Button Disable Tap the Jog Dial Sidetone is the sound of your own voice as picked up by your headset s microphone and reproduced in your own ear by your own speaker It helps you to naturally speak at the correct level according to varying helmet noise conditions If this feature is enabled you can hear what you are speaking during an intercom conversation or a phone call 20 10 Delete All Bluetooth Pairing Information Voice Prompt Delete all pairings Factory Default N A Execute Tap the Phone Button To delete all Bluetooth pairing information of the 208 rotate the Jog Dial until you hear a voice prompt saying Delete all pairings and tap the Phone Button to confirm Tapping the Jog Dial is not available for this setting 205 SENA 20 11 Universal Intercom Pairing Rotate Jog Dial Tap Phone Button Tap Jog Dial Voice Prompt Universal intercom pairing Speed Dial Execute N A Factory Default N A Audio Multitasking Enable Disable To enter into Universal Intercom pairing mode rotate the Jog Dial until Intercom audio Overlay Execute N A you
27. e Jog Dial for 6 seconds until the red LED is rapidly flashing and you hear multiple beeps 2 Within 2 seconds tap the Phone Button again then the LED turns to blue flashing and the beeps turn to high tone double beeps You will hear a voice prompt saying Second mobile phone 5 3 Bluetooth Stereo Device Pairing 1 If the Bluetooth stereo device is integrated with the mobile phone such as smartphones you don t need to pair the 20S with it separately When the 20S is paired with the mobile phone it is also paired as a stereo music device 2 If you have a stand alone Bluetooth stereo device follow the pairing procedure separately The procedure is the same as the procedure in section 5 1 Mobile Phone Pairing pairing Note 3 Search for Bluetooth devices on your mobile phone Select the 1 If Bluetooth connection between the headset and a mobile phone is Sena 20 in the list of the devices detected on the mobile phone disconnected tap the Phone Button to recover the Bluetooth connection 4 Enter 0000 for the PIN Some mobile phones may not ask for the immediately PIN 2 If Bluetooth connection between the headset and a media player is 5 The mobile phone confirms that pairing has completed and the disconnected press the Jog Dial for 1 second to recover the Bluetooth 20S is ready to use You will hear a voice prompt from the 20S conechon anea saying Your headset is paired SENA 205 5 4 Bluetooth GPS Navigat
28. er SENA 205 rubber Pads C 3 INSTALLING THE 20S ON YOUR HELMET Velcro Pads for Speakers 3 1 Helmet Installation Valero Pad for Boom Microphone am To securely install the 20S on the helmet please follow this procedure 1 Loosen the two screws on the back plate of the clamp unit using the enclosed allen wrench Insert the back plate of the clamp unit Velcro Pad for Wired Microphone de between the internal padding and external shell of the helmet and tighten the two screws Please make sure that the microphone is Speaker Pads O O located properly close to your mouth when jon wear the helmet Allen Wrench 205 SENA 2 Depending on the size and shape of your helmet you may need 4 Place the helmet speakers along with the velcro pads centered to to change the thickness of the rubber pad between the clamp your ear in the ear pockets of the helmet If the helmet has deep plates You can find two extra rubber pads in the box To increase ear pockets you can use the speaker pads to place the speakers the overall thickness attach the thinner one to the original rubber closer to your ears pad or replace the original rubber pad with the thicker one 3 Please adjust the direction of the microphone so that the fin side of the microphone is facing outward away from your lips You can easily recognize it by touching the fin with your fingers 5 Attach the headset main u
29. ernal Antenna To extend the intercom distance you may unfold the external antenna from the main unit Push the antenna towards the helmet slightly and it will flip upwards The antenna works most effectively when facing towards the sky 4 GETTING STARTED 4 1 Charging The LED turns red while the headset is charging and turns blue when it is fully charged It takes about 2 5 hours to be completely charged 4 2 Low Battery Warning When the battery is low the blinking blue LED in stand by mode turns to red and you will hear three mid toned beeps and a voice prompt saying Low Battery 4 3 Checking the Battery Level You can check the battery level in two different ways when the headset is powering on 4 3 1 LED Indicator When the headset is powering on the red LED flashes rapidly indicating the battery level 4 flashes High 70 10096 3 flashes Medium 30 7096 2 flashes Low 0 30 205 SENA 4 3 2 Voice Prompt Indicator When you power on the headset keep pressing the Jog Dial and the Phone Button simultaneously for about 3 seconds until you hear three high toned beeps Then you will hear voice prompt indicating the battery level However if you release the buttons as soon as the headset turns on you will not hear the voice prompt for the battery level indication 4 4 Powering On and Off Press the Jog Dial and the Phone Button at the same time to power the headset either on or off When powering on t
30. evices 14 2 Pairing with Other Sena Headset Models for Intercom Conversation The 208 can be paired with all other Sena headset models such as the SMH10 and the SMH5 for intercom conversation Please follow the same procedure as above to pair with these headset models Note The SMH5 cannot participate in multi way intercom with the 20S or the SMH10 The SMH5 has a limited capability of having two way intercom with each other or with other Sena headsets such as the SMH10 and the SMH5 15 TWO WAY amp MULTI WAY INTERCOM 15 1 Two way Intercom la You can start an intercom conversation with one of any intercom friends by using either the Jog Dial or the voice command Single tap to start intercom with the first intercom friend and double tap to start intercom with the second intercom friend To start intercom with the third intercom friend and above triple tap to enter into friend selection mode Rotate the Jog Dial to select a friend and tap once more to initiate the intercom with that friend You can end an intercom conversation by using either the Jog Dial or the voice commands Press and hold for 2 seconds to end any intercom or use the voice command End Intercom Or you can single tap to end intercom with the first intercom friend and double tap to end intercom with the second intercom friend To end intercom with the third intercom friend and above triple tap to enter into friend selection mode Rotate the Jog Dial to selec
31. file Hands Free Profile HFP Advanced Audio Distribution Profile A2DP and Audio Video Remote Control Profile AVRCP SENA 205 2 PACKAGE CONTENTS Headset Main Unit Phone Button Answer and end a mobile phone call Speed dial Call transfer between mobile phone and headset Enter into mobile phone pairing mode Enter into Bluetooth stereo device pairing mode Enter into factory reset mode 0 Turn on off FM tuner nd DC Power Charging amp Firmware Upgrade Port External Antenna Status LED Jog Dial Answer and end a mobile phone call Reject an incoming mobile phone call Start and end intercom conversation Volume adjustment by rotating Play and pause Bluetooth stereo device Track forward and track back by pressing down and rotating Enter into intercom pairing mode Enter into voice configuration setting Navigate through configuration menu Seek FM radio station Universal Helmet Clamp 205 SENA Speaker Port Microphone Port Quick Release Button Earbud Port Static Boom Microphone MP3 Port Non Bluetooth audio device MP3 player mobile phone Laser radar detector Two way radio Dynamic Speakers Ambient Mode Button Wired Boom Microphone o ee n m Wired Microphone eo _ USB Power amp Data Cable Cigarette Charger L 2 5 to 3 5mm Stereo Audio Cable Glued Surface Mounting Adapt
32. gain that correct and safe use of the product is entirely your responsibility Limitation of Liability TO THE FULL EXTENT ALLOWED BY LAW SENA EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY WHETHER BASED IN CONTRACT OR TORT INCLUDING NEGLIGENCE FOR INCIDENTAL CONSEQUENTIAL INDIRECT SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR FOR LOSS OFREVENUE OR PROFITS LOSS OF BUSINESS LOSS OF INFORMATION OR DATA OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE USE PERFORMANCE FAILURE OR INTERRUPTION OF ITS PRODUCTS EVEN IF SENA OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND LIMITS ITS LIABILITY TO REPAIR REPLACEMENT OR REFUND OF THE PURCHASE PRICE PAID AT SENAS OPTION THIS DISCLAIMER CF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE IN ANY CASE THE TOTAL COMPENSATION LIABILITIES OF SENA OR ITS SALES AGENTS SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT BY THE PURCHASER Liabilities Disclaimer In addition to damages which may occur due to the use of the product Sena will not be liable for damages of the product which occur due to the following events In the event the product is misused or used for purposes other than its intended purposes e In the event the product is damaged because the user does not follow the content of the product manual In the event the prod
33. ge is beyond the scope of the product warranty For further information on charged service you may contact the service center of Sena Return for Full Refund Should you not agree to the terms and conditions explained above you may return the product for a full refund To get a refund within 14 days from the purchase date you must return the product to the seller in such a condition as it was purchased Unless you return the product within 14 days from the purchase date you will have read and agreed to all the terms and conditions explained above and Sena will not be liable for any claim for damages related with the product 1 0 5 ce Fe IC gas ce re IC gas SENA www sena com User s Guide for Firmware v1 1
34. ges or modifications to the equipment not expressly approved by the party responsible for compliance could void user s authority to operate the equipment CE Declaration of Conformity This product is CE marked according to the provisions of the R amp TTE Directive 99 5 EC Hereby Sena declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC For further information please consult www sena com Please note that this product uses radio frequency bands not harmonized within EU Within the EU this product is intended to be used in Austria Belgium Denmark Finland France Germany Greece Ireland Italy Luxembourg The Netherlands Portugal Spain Sweden United Kingdom and within EFTA in Iceland Norway and Switzerland 58 Industry Canada Statement This device complies with Industry Canada license exempt RSS standard s Operation is subject to the following two conditions 1 This device may not cause interference 2 This device must accept any interference including interference that may cause undesired operation of the device Bluetooth License The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Sena is under license Other trademarks and trade names are those of their respective owners The product is compliant with and adopts the Bluetooth Specification 3 0 and has successfully passed all interoperab
35. hase In addition the quality warranty of the product expires when the warranty period expires However in the following cases the warranty will be terminated prematurely In the event the product has been sold or transferred to a third party In the event the manufacturer s name serial number product label or other markings have been modified or removed 61 SENA 205 In the event any unauthorized person has tried to disassemble repair or modify the product Notice and Waiver By buying and using this product you relinquish considerable legal rights including any claim for compensation for damages Therefore be certain to read and understand the following terms and conditions before using the product Use of this product will constitute consent to this agreement and forfeiture of rights to all claims If you do not consent to all the terms and conditions of this agreement return the product for a refund Refer to the section Return for Full Refund 1 62 You agree that you your descendants legal proxies successors or transferees will not raise permanent volitional request for any suit claim implementation redemption or similar action from Sena with regard to any occasion such as difficulty pain suffering inconvenience loss injury or death which may occur to you or a third party during the use of this product You must completely understand and accept all risks including those
36. he headset press the Jog Dial and the Phone button at the same time until the blue LED appears while hearing the ascending beeps When powering off the headset press the Jog Dial and the Phone Button at the same time until the red LED appears briefly and the headset turns off completely while hearing descending beeps 4 5 Volume Adjustment You can easily adjust the volume by rotating the Jog Dial You will hear a beep when the volume reaches maximum or minimum level The volume is set and maintained independently at different levels for each audio source even when you turn off and on the headset For example once you set the volume for mobile phone handsfree it will not change even if you adjust the volume for your Bluetooth MP3 music So you can always maintain the preferred optimum volume level for each audio source 4 6 Software 4 6 1 Sena Device Manager The Device Manager allows you to upgrade the firmware and configure the device settings directly from your PC Using this software you can assign speed dial presets FM radio frequency presets and more It is available to download for both Windows and Mac For more information on downloading the Device Manager please visit www sena com 4 6 2 Sena Smartphone App The Sena Smartphone App allows you to configure the device settings create groups of intercom friends and view the quick start guide Simply pair your phone with your 20S headset run the Sena Smartphone App and y
37. he static boom microphone please refer to the following steps 1 Remove the back plate of the clamp unit by loosening the two screws with the enclosed allen wrench 2 f you look into the back side of the clamp the left port is for speakers and the right port is for microphone 205 SENA 3 Two extra microphones are provided a wired boom microphone and a wired microphone Connect the one you need according to your helmet type 4 Reattach the back plate to cover the microphone and the speaker port 5 Follow Steps in section 3 1 Helmet Installation to complete the clamp installation 3 3 1 Wired Boom Microphone When installing the included wired boom microphone place the velcro end of the boom microphone between the internal helmet cheek pad and the internal wall of the helmet shell The boom microphone should be 3 3 2 Wired Microphone In case of the wired microphone attach the enclosed velcro pad for the wired microphone to the inside of the chin guard for full face helmets Place the wired microphone on the velcro pad and connect it to the connector of the clamp unit SENA 205 3 4 Earbuds If you want to wear your own earbuds connect the earbuds to the earbud port on the left side of the clamp You can connect your earbuds to the clamp while having the speakers connected to the clamp The sound of the earbuds will be active while the sound of the outer speakers becomes inactive 3 5 Ext
38. ifying an intercom busy signal In this case you have to try again later 15 4 Intercom Reconnection If your intercom friend goes out of range while having an intercom conversation you may hear static noise and eventually the intercom will be disconnected In this case the 20S automatically tries to reconnect the intercom every 8 seconds and you will hear high tone double beeps until the intercom is reestablished If you don t want to make a reconnection tap the Jog Dial to stop the attempt 16 THREE WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT You can have a three way conference phone call by adding an intercom friend to the mobile phone conversation While having a mobile phone call make an intercom call to one of the intercom friends by tapping the Jog Dial to form a three way conference call with the person on the mobile phone line To disconnect the intercom first and go back to your private mobile phone call terminate the intercom by tapping the Jog Dial To end the mobile phone call first and maintain the intercom conversation press the Jog Dial for 2 seconds or tap the phone button or wait for the person on the mobile phone line to end the call Start Tap Jog Dial while having a mobile phone call End intercom first Tap Jog Dial Press Jog Dial for 2 or Tap Phone Button or Wait for the called person to end the call End phone call first Start amp End Three way Conference Phone Call
39. ile Phone Pairing Mobile Phone Pairing Mobile Phone Pairing Q Second Mobile Phone Pairing Intercom Pairing Mobile Phone Mobile Phone Pairing Usage e Mobile Phone phone call e SR10 two way radio GPS instruction Radar detecting signal e SM10 listening to music sharing e MI SR10 lloll g 081 sn SM10 Intercom Second Mobile Mobile Phone Phone Pairing Pairing Two way Radio Intercom Pairing Mobile ca Pairing A Radar Detector 7 54 205 SENA Case 10 Mobile Phone m Mobile Phone Pairing y Wall Intercom GPS end ors Pairing Bluetooth GPS Mobile Phone Mobile Phone Pairing Pairing SM10 Motorcycle MP3 Player Audio System Bluetooth Pairing Procedure 6 Mobile Phone Pairing Mobile Phone Pairing Mobile Phone Pairing GPS Pairing Intercom Pairing Bluetooth GPS zumo 220 350 550 660 665 TomTom Rider Usage e Mobile Phone phone call GPS GPS instruction e SM10 listening to music sharing Intercom 55 SENA 205 25 OPERATION QUICK REFERENCE n Voice Type Function Button Command Command LED Beep Press the Phone Ascendi Power on Button and the Jog Solid blue beeps 9 Dial for 1 second P Press the Phone Desconaln Power off Button and the Solid red 9 x beeps Jog Dial mE Volume Functi
40. ility tests that are specified in the Bluetooth specification However interoperability between the device and other Bluetooth enabled products is not guaranteed 205 SENA WEEE Waste Electrical and Electronic Equipment The crossed out wheel bin symbol on the product litera ture or packaging reminds you that all electri electronic products batteries and accumulators must be taken to separate collection at the end of cal and heir working life This requirement applies to the European a Union and other locations where separate co lection systems are available To prevent possible harm to the environment or human health from uncontrolled waste disposal please do not dispose of these products as unsorted municipal waste but hand it official collection point for recycling inatan SAFETY INFORMATION Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and or damage to property Product Storage and Management Keep the product free of dust It may damage mechanical and elect Don Don Don stron with prod ronic parts of the product ot store the product in high temperatures as this may reduce the ife span of electronic devices damage the battery and or melt plastic parts of the product ot store the product in cold temperatures Abrupt changes in emperatures may cause condensation and damage electronic circui
41. ing Bluetooth GPS zumo 550 660 665 TomTom Rider Usage GPS zumo 660 665 GPS instruction phone call listening to music zumo 550 TomTom Rider GPS instruction phone call Intercom Case 3 Pairing A A Anu ALI Ih yy e 7 lg Intercom Second Mobile Pairin Phi Pairi g one Faring Mobile Phone Bluetooth Pairing Procedure 6 Mobile Phone Pairing Second Mobile Phone Pairing Intercom Pairing Bluetooth GPS zumo 220 350 550 660 665 TomTom Rider Usage e Mobile Phone phone call e GPS zumo 660 665 GPS instruction listening to music zumo 220 350 550 TomTom Rider GPS instruction 49 Intercom SENA 205 Case 4 Case 5 3 Mobile Phone Mobile Phone Mobile Phone Mobile Phone Pairing Pairing i ap AIM ui Ko e Pairing Pairing Motorcycle Bluetooth Intercom All ii Pairing Pairing Bluetooth GPS Audio System 1181 e Bluetooth Pairing Procedure 6 Mobile Phone Pairing 7 Mobile Phone Pairing puede E Intercom Pairing obile Phone Pairing Mobile Phone Pairing pr poe apps Intercom Palma U Motorcycle Bluetooth Audio System Ha BMW R1200RT K1600GT K1600GTL Mobile Phone phone call i GPS GPS instruction sage e Intercom e Mobile Phone phone call e Motorcycle Bluetooth Audio System listening to music GPS instruction 50 Intercom 205 SENA Case 6 Bluetooth Pairing Procedure
42. ing the last number redial menu you will hear a voice prompt saying Last number redial Then to redial the last phone call number tap the Phone Button To call one of the speed dials rotate the Jog Dial clockwise or counter clockwise to navigate between the menus until you hear a voice prompt saying Speed dial Then tap the Phone Button If you want to exit the speed dial immediately rotate the Jog Dial until you hear a voice prompt saying Cancel and tap the Phone Button or the Jog Dial If any button is not pressed within 15 seconds the 20S will exit the voice speed dial menu and go back to stand by mode Note 1 Make sure that you connect the mobile phone and the headset in order to use the speed dial function 2 Speed dial needs to be setup through the headset refer to section 20 1 Assigning Speed Dial Sena Smartphone App or Device Manager first Answer Tap Phone Button or Tap Jog Dial or Say Hello End Tap Phone Button or Press Jog Dial for 2 Reject Press Jog Dial for 2 Transfer Press Phone Button for 2 Call Use phone keypad Speed Dial Double tap Phone Button Voice Dial Tap Phone Button Mobile Phone Call Button Operations 7 3 Intercom and Mobile Phone Call 1 When you have an incoming mobile phone call during an intercom conversation you will hear a ring tone You can choose whether to 1 answer the mobile phone call an
43. ion Pairing You can listen to voice instructions from Bluetooth GPS navigation Some GPS systems use the mobile phone profile HFP Hands Free Profile and others use the stereo music profile A2DP Advanced Audio Distribution Profile Most motorcycle specific GPS systems use a mobile phone profile for turn by turn voice instructions You can simultaneously use a mobile phone and a GPS which uses a mobile phone profile by one of the following procedures 5 4 1 GPS Pairing 1 Turn on the headset and press the Jog Dial for 6 seconds until the red LED is rapidly flashing and you hear multiple beeps Within 2 seconds tap the Phone Button and hear the voice prompt Second mobile phone pairing Again within 2 seconds tap the Phone Button and the LED turns to green flashing and the beeps turn to multiple mid toned beeps You will hear the voice prompt GPS pairing Search for Bluetooth devices on the GPS navigation screen Select the Sena 20S in the list of the devices detected on the GPS Enter 0000 for the PIN The GPS confirms that pairing has completed and the 20S is ready to use You will hear a voice prompt from the 20S saying Your headset is paired If the pairing process is not completed within three minutes the 208 will return to stand by mode The pairing diagram for GPS pairing is shown in the figure below Smart Phone Mobile Phone DP Pairing y 27 Second Mobile Phone Pairing GPS Pairing 205
44. lashing ntercom intercom second Play Pause i Bluetooth ress the Jog Dial Music i Mid tone i or 1 second double beeps Music music Track forward Rotate the Jog Dial Next i _ back while pressing Previous 56 205 SENA Type Function Button Command TESS LED Beep CERTIFICATION AND SAFETY APPROVALS Press the Phone 1 FMradioon Button for 2 FM radio ie FCC Compliance Statement ne f seconds SURE RESRS This device complies with part 15 of the FCC rules Operation is subject to pon Prone Fm radio TE the following two conditions Rea Stop double beeps 1 This device may not cause harmful interference and Select preset TEP the Phone Next ione 2 This device must accept any interference received including p Button Previous single beep interference that may cause undesired operation FM radio Seek stations n piak E triple This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules These limits are designed Scan up FM Double tap the A f i h A band Phone Buition E to provide reasonable protection against harmful interference in a residential Stop scanning Double tap the A igh tone installation This equipment generates uses and can radiate radio frequency Phone Button double beeps
45. nabling Disabling Voice Activated Phone Answering Voice Prompt VOX phone Factory Default Enable Enable Tap the Phone Button Disab Tap the Jog Dial If this feature is enabled you can answer incoming calls by simply saying a word loudly enough unless you are connected to intercom For example when you hear a series of beeps for an incoming call you can answer the phone by saying Hello or any other word loudly However the VOX Phone feature does not work if you are connected to intercom This feature is enabled from the factory but can be disabled through the configuration menu Device Manager or the Sena Smartphone App If this mode is disabled you have to tap the Jog Dial or the Phone Button to answer an incoming call 43 SENA 205 20 7 Enabling Disabling HD Intercom HD intercom Enable Voice Prompt Factory Default Enable Tap the Phone Button Disable Tap the Jog Dial HD intercom enhances the two way intercom audio from normal quality to HD quality HD intercom will become temporarily disabled when you enter into a multi way intercom If this feature is disabled the two way intercom audio will change to normal quality 20 8 Enabling Disabling Voice Prompts Voice Prompt Voice prompt Enable Factory Default Enable Tap the Phone Button Disable Tap the Jog Dial You can disable voice prompts but the following voice prompts ar
46. nit to the clamp unit Slide the main unit down onto the clamp unit until it clicks firmly into the bottom portion of the clamp unit SENA 205 6 To remove the main unit from the clamp unit press the Quick Release Button to slide it off the clamp unit 3 2 Glued Surface Mounting Adapter If you have any problem equipping the clamp unit on the helmet for any reason you may use the glued surface mounting adapter to attach the clamp unit on the external surface of the helmet 1 Remove the back plate of the clamp unit completely 2 Remove the rubber pad and replace it with the thicker rubber pad included in the package 3 Putthe speaker port through the glued external adapter 4 Hook on the adapter to the clamp unit then screw in the glued external adapter to the clamp unit 5 Locate a proper surface on the helmet to attach the unit then clean the helmet surface location with a moistened towel and allow to dry thoroughly 6 Peel off the cover of the adhesive tape of the adapter and attach the unit on the proper surface of your helmet Note Sena recommends the clamp unit over the glued surface mounting adapter Even though the glued surface mounting adapter is provided for convenience Sena does not assume any responsibility for use of it Users may have to use the glued adapter at their own risk and responsibility 3 3 Switching the Microphone If you want to use a different microphone instead of t
47. nt sound outside of your helmet by activating The voice command of the 20S allows you to operate certain operations the Ambient Mode To activate the Ambient Mode press the Ambient by simply using your voice You can control the 20S completely Mode Button which is placed on the bottom of the clamp unit To handsfree using the voice recognition The voice command function deactivate the Ambient Mode press the Ambient Mode Button again works only with English commands Voice Command Procedure 1 In stand by mode say Hello Sena or double tap the surface of the main unit to enter the voice command mode In non stand by modes double tap the surface to enter the voice command mode 2 Speak a voice command from the table below Mode Status Function Voice Command Intercom Ambient Mode Button Start End each Intercom one two nine End all intercoms End intercom Nere Standby Music i The ambient mode has the highest priority so you cannot make or answer FM A dio Call last intercom Last intercom phone call listen to music or have an intercom conversation if the Ambient Group Intercom Group intercom Mode is activated Intercom pairing Pairing intercom Cancelling operations Cancel 28 205 SENA Mode Status Function Voice Command Standby Play Pause music Music or Stereo Turn on off FM radio FM radio Check batter
48. od touch are registered trademarks of Apple Inc Zumo is a trademark of Garmin Ltd or its subsidiaries TomTom is the trademark or registered trademark owned by TomTom International B V Other trademarks and tradenames are those of their respective owners 205 SENA CONTENTS 3 INTRODUCTION lle 5 8 STEREO MUSIC ich oixee pter t Geek a tok fic RE eps 8 1 By Stereo Audio Cable RNA PACKAGE CONTENTS diaaa 6 82 By Bluetooth Wireless Stereo 22 INSTALLING THE 20S ON YOUR HELMET ui 8 83 Music Sharing m 3 1 Helmet Installation 8 GB GPS NAVIGATION M 24 3 2 Glued Surface Mounting Adapter 0 3 3 Switching the Microphone Sui 230 10 SENA SR10 TWO WAY RADIO ADAPTER ii 25 3 4 Earbuds 2 3 5 External Antenna 2 11 FM RADIO 11 1 FM Radio On Off 11 2 Preset Stations 11 3 Seek and Save 11 4 Scan and Save 11 5 Temporary Preset 11 6 Region Selection 12 AMBIENT MODE 4 GETTING STARTED 2 2 2 2 3 3 3 4 13 VOICE COMMAND 4 5 5 6 7 9 9 9 4 1 Charging 4 2 Low Battery Warning 4 3 Checking the Battery Level 4 4 Powering On and Off 4 5 Volume e si 4 6 Software 5 PAIRING THE 208 WITH H BLUETOOTH DEVICES 5 1 Mobile Phone Pairing 5 2 Second Mobile phone Pairing 5 8 Bluetooth Stereo Device Pairing 5 4 Bluetooth GPS Navigation Pairing 5 5
49. on A Rotate the Jog Dial adjustment Voice Double tap the surface of the main Hello Sena Green flashing command unit Press the Ambient Ambient Mode Mode Button Green flashing i Press the Phone Blue amp red decli phone Button for 5 alternatively di m Panno seconds flashing P p Second Press the Jog Dial Red flashing Multiple beeps mobile phone for 6 seconds Mobile Phone Pairing Tap the Phone Button within 2 seconds Press the Jog Dial j fortsecorids Red flashing Multiple beeps GPS pairing Tap the Phone Button within 2 seconds Tap the Phone Button again within 2 seconds Voice Type Function Button Command Commerc LED Beep Press the Phone Eliahitone Call transfer Button for 2 19 single beep seconds Answer amp end Tap the Phone i i _ phone call Button Mobile aah the Ph Phone Voice dial apihe Phone Button Double Tap the Speed dial Mid tone SERRA SI Phone Button one two three single beep Reject Press the Jog Dial 7 i _ incoming call or 2 seconds Press the Jog Dial Pairing Mid tone ntercom or 6 seconds intercom Red flashing single beep pairing ap the Jog Dial of any one of the two headsets Start End Intercom each intercom FAP the Jog Dial one two nine x Intercom End all Press the Jog Dial End Blue flashin Mid tone intercoms or 2 seconds intercom 9 double beeps Press the Ambient Start Group Mode Button for 1 r Group m Green f
50. on or don t press the Jog Dial within 5 seconds the reset attempt is canceled and the headset returns to stand by mode You will hear a voice prompt saying Canceled 22 FAULT RESET When the 20S is not working properly or is in faulty status for any reason you may reset by pushing the pin hole reset button at the back of the headset main unit Insert a paper clip into the reset pin hole and press the reset button for a second with light pressure The 208 will be switched off and you have to turn the system back on and try again However this will not restore the headset to factory default settings 205 SENA 23 FIRMWARE UPGRADE The 20S supports firmware upgrade function Please visit Sena Bluetooth web site at www sena com to check the latest software downloads 47 SENA 205 24 SENA BLUETOOTH CONNECTION CASE STUDIES Case 1 Bluetooth Pairing Procedure 6 Mobile Phone Pairing GPS Pairing Intercom Pairing Bluetooth GPS zumo 220 350 550 660 665 TomTom Rider Usage e Mobile phone phone call listening to music GPS GPS instruction Intercom Mobile Phone o Mobile Phone Pairing P p Zw Intercom LD GPS Pairing Pairing Bluetooth GPS 48 205 SENA Case 2 GPS Mobile Phone Pairing dll 9 VITTI I Mobile Phone Mobile Phone oe Pairing Intercom Pairing Bluetooth Pairing Procedure GPS Mobile Phone Pairing Mobile Phone Pairing Intercom Pair
51. onversation with a passenger on the back seat and use a two way radio for group communication with other motorcycle riders Smart Phone Two way Radio HEP Mobile Phone A2DP Pairing Wired Connection Wired i P Audio from y Two way Radio Second Mobile 20S Connection Phone Pairing Intercom intercom Sena SR10 airing Wired Connection y Intercom Friend Radar Detector Intercom and Two way Radio 25 SENA 205 11 FM RADIO 11 1 FM Radio On Off To turn on the FM radio press and hold the Phone Button for 2 seconds until you hear a mid tone double beep sound You will then hear a voice prompt saying FM on In order to turn off the FM radio press and hold the Phone Button for 2 seconds until you hear a voice prompt saying FM off When you power off the 20S will remember the last station frequency When you power it on the last station frequency will be playing 11 2 Preset Stations You can listen to preset stations while listening to the FM radio Tap the Phone Button once to go upward to your next saved preset station 11 3 Seek and Save Seek is the function that searches from station to station frequencies To use the Seek function please follow the procedure below 1 Rotate while pressing the Jog Dial clockwise to search up the station dial or counter clockwise to search down the station dial 2 If the tuner finds a station while searching frequencies it stop
52. ou can configure its settings directly from your smartphone You can download the Sena Smartphone App for Android or iPhone from www sena com app SENA 205 5 PAIRING THE 20S WITH BLUETOOTH DEVICES Before using the 208 Bluetooth headset with any of Bluetooth devices for the first time you will need to pair them together It can be paired with Bluetooth mobile phones Bluetooth stereo devices such as MP3 players or motorcycle specific Bluetooth GPS navigation and with other Sena Bluetooth headsets This pairing operation is only required once for each Bluetooth device The headset remains paired with the devices and automatically reconnects to them when they are within range You will hear a high tone single beep and a voice prompt when the headset connects to the paired device automatically Phone connected to a mobile phone Media connected to a Bluetooth stereo device 5 1 Mobile Phone Pairing 5 1 1 General Mobile Phone Pairing ilk Turn on the 20S and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps You will hear a voice prompt saying Phone pairing Search for Bluetooth devices on your mobile phone Select the Sena 20S in the list of the devices detected on the mobile phone Enter 0000 for the PIN Some mobile phones may not ask for the PIN The mobile phone confirms that pairing has completed and the 20S is ready to use You will hear
53. s above seconds until red LEDs of the both units start to flash rapidly You will hear a voice prompt saying Intercom pairing Remove the two headsets from the clamps Grab them with each hand and shake them simultaneously until the green LEDs Fai of the both units start to flash rapidly x y B C D J B p D J Pairing A amp B gt a 5 Vi 3 Simply tap the Jog Dial of any one of the two headsets A or B It ry amp ry ry ry ry ry doesn t matter that you choose A or B and wait until the LEDs of o DN PA i IVA aoe both headsets turn to blue and intercom connection is automatically a ad w a4 4 Ww W 4 established The two 20S headsets A and B are paired with each Pairing A amp C Pairing A amp D other for intercom conversation If the pairing process is not completed within one minute the 20S will return to stand by mode 30 205 SENA 5 The intercom pairing queue is Last Come First Served If a headset has multiple paired headsets for intercom conversations the last paired headset is set as first intercom friend The previous intercom friend becomes second intercom friend and third intercom friend Note 1 For example after the pairing procedures listed above headset D is the first intercom friend of headset A Headset C is the second intercom friend of headset A and headset B is the third intercom friend of headset A 2 Pairing by shaking works only between 20S d
54. s the seek function 26 To save the current station press and hold the Jog Dial for 2 seconds until you hear a voice prompt saying Preset Rotate the Jog Dial clockwise or counter clockwise in order to select which preset number you want for that specific station You can save up to 10 preset stations You may cancel the preset operation by waiting approximately 10 seconds You will then hear Save preset cancelled You can also rotate the Jog Dial clockwise or counter clockwise until you hear Cancel Tap the Jog Dial to confirm cancellation You will then hear Save preset cancelled To save the current station tap the Jog Dial again You will then hear a voice prompt saying Save preset To delete the saved station in the preset number tap the Phone Button You will then hear a voice prompt saying Delete preset Note 1 You can save FM stations to presets before using FM radio Connect the 208 to your PC and open the Device Manager It allows you to save up to 10 FM station frequency presets on the 20S settings menu You may do the same operation by using the Sena Smartphone App 2 You can still answer an incoming phone call and intercom while listening to the FM radio 205 SENA 11 4 Scan and Save Scan is the function that automatically searches station frequencies starting from the current frequency and up To use the scan function please follow the procedures below 1
55. s wd3 20 5 Setting Motion Sensor Sensitivity seen 43 20 6 Enabling Disabling Voice Activated Phone Answering 43 20 7 Enabling Disabling HD Intercom iii 44 20 8 Enabling Disabling Voice Prompts 20 9 Enabling Disabling Sidetone 20 10 Delete All Bluetooth Pairing Informatio 20 11 Universal Intercom Pairing 20 12 Exit Voice Configuration Menu RESET TO FACTORY DEFAULT SETTINGS CERO RRRTRP ERO AO 46 FAULT RESET 46 FIRMWARE UPGRADE iii 47 SENA BLUETOOTH CONNECTION CASE STUDIES OPERATION QUICK REFERENCE FCC Compliance Statement FCC RF Exposure Statement FCC Caution CE Declaration of Conformity Industry Canada Statement Bluetooth License WEEE Waste Electrical and Elec SAFETY INFORMATION Product Storage and Management Product Use e Battery PRODUCT WARRANTY AND gt DISCLAIMER Limited Warranty Warranty Exclusions e Warranty Service Return for Full Refund 205 SENA 1 INTRODUCTION Thank you for choosing the Sena 20S Motorcycle Bluetooth Communication System With the 20S you can call handsfree on your Bluetooth mobile phone listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly and have intercom conversations in full duplex with a passenger or other motorcycle riders The
56. sitivity of the selected level you will hear double beeps If your voice is smaller than the sensitivity of the selected level you will not hear anything 42 205 SENA 20 4 Enabling Disabling Navigation App Support Voice Prompt Navigation app support Factory Default Disable Enable Tap the Phone Button Disable Tap the Jog Dial When Audio Multitasking is enabled your smartphone s GPS application reduces in volume whenever there is an ongoing intercom conversation To listen to your smartphone s GPS navigation clearly without this volume reduction enable Navigation App Support Note The volume level of the music will not be reduced during an intercom conversation when the Navigation App Support setting is enabled 20 5 Setting Motion Sensor Sensitivity Voice Prompt Motion sensor sensitivity Factory Default High Level Adjustment Rotate the Jog Dial High Low Disable Apply Tap the Phone Button Motion sensor sensitivity determines the sensitivity when you double tap on the surface of the 20S to enter voice command mode Rotate the Jog Dial until you hear the voice prompt Motion sensor sensitivity By tapping the Phone Button it will lead you to level adjustment mode Default is at high but you may change it to low or disable the feature by rotating the Jog Dial After you have completed the setting tap the Phone Button to apply the changes 20 6 E
57. some older mobile phones which do not automatically transfer calls to the headset press the Phone Button after entering phone numbers on the mobile phone keypad Tap the Phone Button in stand by mode to activate the voice dialer of your mobile phone For this the voice dialing feature must be available on the mobile phone Refer to your mobile phone manual for further instruction Note 1 If you are using second mobile phone connection and you have an incoming call from the second phone during the call of the first phone then you may still receive the call from second phone In this case the call from the first phone is on waiting mode If you end a call then it will automatically guide you to the first phone call 2 If you are using second mobile phone connection of mobile phone and GPS you may not be able to listen to the GPS voice instruction during the phone call 7 2 Speed Dialing You can quickly make a phone call by using the voice speed dial menu 1 To enter into the voice speed dial menu double tap the Phone Button and you will hear a mid tone single beep and a voice prompt saying Speed dial 205 SENA Rotate the Jog Dial clockwise or counter clockwise to navigate between the menus You will hear voice prompts for each menu item Tap the Phone Button to select a voice menu among the followings 4 Speed dial 3 5 Cancel 1 Last number redial 2 Speed dial 1 3 Speed dial 2 After select
58. t a friend and tap once more to end intercom with that friend Also use the voice command Intercom one nine to end each intercom 31 SENA 205 3rd 9th intercom friend 1st intercom friend 2nd intercom friend Triple tap Rotate to select friend Single tap Start intercom Single tap Double tap Triple tap Rotate to select friend gt Single tap End intercom Single tap Double tap End any intercom press and hold for 2 second Start amp End Two way Intercom 15 2 Multi way Intercom 15 2 1 Start Three way Intercom You A can have a three way intercom with two other 20S friends B amp C by establishing two intercom connections at the same time 1 You A need to be paired with two other friends B amp C for three way intercom o ws SITA 22m a t First Friend Second Friend C 32 2 Start an intercom conversation with one of the two friends in your intercom group For example you A may start an intercom conversation with the intercom friend B Or intercom friend B may start an intercom call with you A P Nd P First Friend Second Friend B C 3 The second intercom friend C may join the intercom by making an intercom call to you A You A may also connect the second intercom friend C First Friend Second Friend B 205 SENA 4 Now you A and two 208 intercom friends B amp C are having a three way
59. te the Jog Dial until you hear a voice prompt saying Universal intercom pairing Please refer to section 20 9 Universal Intercom Pairing for more details 205 SENA 3 Perform the operation required for handsfree pairing on the non Sena Bluetooth headset refer to the users manual of the headsets you want to use The 20S will automatically perform pairing with non Sena Bluetooth headsets in pairing mode 18 2 Two way Universal Intercom You can initiate the Universal Intercom connection with non Sena Bluetooth headsets using the same intercom connection method as you would between other Sena headsets You may single tap the Jog Dial to begin an intercom conversation with the first intercom friend double tap with the second intercom friend and triple tap with the third intercom friend Non Sena Bluetooth headsets may initiate the Universal Intercom connection by activating the voice dialing or using the redialing operation You may also disconnect the existing connection by ending a call operation function refer to the users manual of the headsets for voice dialing redialing and ending a call 18 3 Three way Universal Intercom You may make a three way Universal Intercom connection with two 208s and one non Sena Bluetooth headset 1 You A need to be paired with a non Sena Bluetooth headset B and another 20S headset C for the three way intercom B C 2 Start an intercom conversation with non Sena Bluetooth
60. tion as below 1 To enter into voice configuration menu press and hold the Jog Dial for 12 seconds until the LED shows solid blue and you hear high tone double beeps You will also hear a voice prompt saying Configuration menu 2 Rotate the Jog Dial clockwise or counter clockwise to navigate between the menus You will hear voice prompts for each menu item as below 3 You can enable the feature or execute the command by tapping the Phone Button or disable the feature by tapping the Jog Dial 4 Ifany button is not pressed within 10 seconds the 20S will exit the configuration and go back to stand by 5 If you want to exit the configuration immediately rotate the Jog Dial until you hear a voice prompt saying Exit configuration and tap the Phone Button 205 SENA The voice prompt for each menu item is as below 20 1 Assigning Speed Dial 1 Speed dial 7 HD intercom Voice Prompt Speed dial 2 Audio multitasking 8 Voice prompt Factory Default N A 3 Intercom audio overlay 9 Sidetone Execute Tap the Phone Button sensitivity 10 Delete all pairings 1 To assign a phone number as a speed dial rotate the Jog Dial until you hear a voice prompt saying Speed dial 2 Tap the Phone Button and you will hear voice prompts saying Speed dial one and Phone connected 4 Navigation app support 11 Universal intercom pairing 5 Motion sensor sensitivity 12 Exit configuration
61. ts ot clean the product with cleaning solvents toxic chemicals or g detergents as this may damage the product Do not paint the product Paint may obstruct moving parts or interfere he normal operation of the product Do not drop or otherwise shock the product It may damage the uct or its internal electronic circuits Do not disassemble repair or modify the product as this may damage he product and invalidate the product warranty 59 SENA 205 Product Use In some regions it is prohibited by law to ride motorcycles or bicycles while wearing headsets Therefore be certain to comply with all relevant laws in the region before using the product Use of the product at a high volume for a long period of time may damage your eardrums or hearing ability Keep the volume at a modest level Do not cause impact to the product or touch it with sharp tools as this may damage the product Do not use the product in high temperatures or apply heat to the product as this may cause damage explosion or fire Keep the product dry and away from water It may damage the product Keep product away from pets or small children It may damage the product or cause accidents Do not use the product near a microwave oven or a wireless LAN device as this may cause malfunction or interference with the product In any place where wireless communication is prohibited such as hospitals or airplanes turn off the power
62. tton for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps Within 2 seconds tap the Phone Button again then the LED turns to blue flashing and the beeps turn to multiple mid tone beeps You will hear a voice prompt saying Phone selective pairing Search for Bluetooth devices on your smartphone Select the Sena 208 in the list of devices detected on your phone Enter 0000 for the PIN Some smart phones may not ask for PIN SENA 205 7 MOBILE PHONE CALL MAKING AND ANSWERING 7 1 Mobile Phone Call Making and Answering d 20 When you have an incoming call simply tap the Phone Button or the Jog Dial to answer the call You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone Answering VOX Phone is enabled unless you are connected to intercom seconds the call To reject beep whi seconds To end a call tap the Phone Button or press the Jog Dial for 2 until you hear a beep or wait for the called person to end a call press the Jog Dial for 2 seconds until you hear a e the phone is ringing To transfer a call between the mobile phone and the headset during the phone conversation press the Phone Button for 2 until you hear a beep There are several ways to make a phone call Enter numbers on your mobile phone s keypad and make a call Then the call is automatically transferred to the headset For
63. uct is damaged because it has been left unattended or has undergone any other accident 63 SENA 205 In the event the product is damaged because the user has used any parts or software which are not provided by the manufacturer Inthe event the product is damaged because the user has disassembled repaired or modified it in such way as is not explained in the product manual In the event the product is damaged by a third party n the event the product is damaged due to Acts of God including fire flood earthquake storm hurricane or other natural disaster In the event the surface of the product is damaged by use Warranty Service To obtain product warranty service send the defective product at your expense to the manufacturer or the seller along with proof of purchase a receipt that shows the purchase date a product registration certificate of the Website and other relevant information Take necessary measures to protect the product In order to get a refund or replacement you must include the whole package as it was purchased Free of charge Service Sena will provide free of charge repair or replacement service for the product when product defects occur within the scope of the product warranty during the warranty period 64 Charged Service Sena will provide charged repair or replacement service for the product when the product warranty period has been expired or when the product dama
64. y Check battery Speed dialing Speed dial one two three Redial the last call Redial Voice command help What can say Check connected devices Connected devices Configuration menus Configuration Music FM Radio Next track music next preset FM radio Next Previous track music previous preset FM radio Previous Stop music FM Radio Stop Note 1 Voice command performance may vary based on the environmental conditions including riding speed helmet type and ambient noise To improve the performance minimize wind noise on the microphone by using the large microphone sponge and closing the visor 2 To activate the voice command during non stand by functions double tap the surface of the main unit 29 SENA 205 A 14 INTERCOM PAIRING amp 14 1 Pairing with Other 20S Headsets for Intercom Va Conversation B C D J The 20S can be paired with up to nine other headsets for Bluetooth LD L y m 7 intercom conversation 1 Turn on the two 20S headsets A and B that you would like to pair with each other A un 2 There are two ways you can enter the two headsets into pairing 4 You can pair with up to nine other headsets To pair with more mode headsets such as A and C A and D and more simply follow the Press and hold the Jog Dial of the headset A and B for 6 same procedure a

Download Pdf Manuals

Related Search

Related Contents

476961_GreaseCollectorBox R1_EN_ES_FR.indd  IPGS-5400-2P IGS-5400-2P  気圧試験機取扱手順書 ダウンロード PDF(ポータブル・ドキュメント  Gel Warmer TT1000  Manuel d`instructions Appareil de transport individuel pour poudres  UM10833 TEA1836DB1200 TEA18362LT + TEA1892TS 45 W cool    XPW1224U - User Manual    

Copyright © All rights reserved. Failed to retrieve file