Home

User's guide - Video Game Console Library

1. Special setup menu for TV TV PROGRAM LIST DR TV2 ZDF EURO WOANDUBWN 10 CNN Vil Ben see5s 12 INFO 13 SAT1 14 FILMNET 15 TVS Wi sagveese 17 MTV 18 RTL 19 SUPER NAME MOVE CLEAR Menu listing the TV stations you have tuned in the TV program list If you have just auto tuned your TV Satellite or Radio stations a program list for the appropriate source will appear on the screen You can use the program lists to call up name move or clear a tuned station Naming a station For most stations names will be available in the program list already Names for TV and Satellite stations appear automatically during auto tuning For Radio stations a name may appear both during auto and manual tuning If you wish you name a station which has not been named already Moving or clearing a station Via the program list you can clear or move a station to a different program number If the new program number you choose is already occupied the new station and the old station will change places Now move the old station to another program number Naming a station If you choose to name a station yourself the station or program number you select will be emphasised to make the actual naming easier as illustrated on the program list for TV stations to the right To write a name character by character you press A or Y until you find the first character you
2. MIX You can superimpose the Teletext page on the TV picture and see both simultaneously When you want to see just the Teletext again press GO while MIX is still displayed on the Beo4 display REVEAL If a Teletext page contains concealed text for example the answer to a riddle you can use the reveal function to reveal the concealed text When you want to conceal the text again press GO while FEVEAL is still displayed on the Beo4 display Note In order to display REVEAL on Beo4 you must add the function to the Beo4 list of functions see Beo4 s own User s guide and the chapter Customising your Beo4 for further instructions Retaining a subpage Call up the Teletext page with the subpages you want then Press to retain the subpages STOP Press to see the subpages Alternatively Key in the four digits of the subpage you want to see for example subpage 0005 Press to release the subpages STOP Press LIST until LARGE is displayed LIST ul i o 5 O e Press to enlarge the text Press GO again to enlarge the remaining part of the text and press GO again to return to normal Teletext size Press LIST until MIX is displayed LosT then Press to superimpose the Teletext page on the TV picture Press GO again to see only the Teletext page Press LIST until REVEAL is displayed ust then Press to reveal concealed text GO Press GO again to conceal the text 31
3. TIME DATE MONTH YEAR 20 00 FRI 10 SEPTEMBER 1996 DR YES TEXT TIME SPLAY Menu for setting the clock the item TEXT TIME indicates synchronisation with Teletext The item DISPLAY indicates whether or not the clock will be displayed on the BeoCenter AV5 display In order for BeoCenter AV5 to display the correct time and execute a timed operation correctly the built in clock must be set to the correct time and date You can synchronise the clock with the Teletext time broadcast by the station you are currently on or choose to set the clock yourself If you synchronise with Teletext make sure that you are on a national station so that the clock will be set to the right time In the menu for setting the clock you can also preset the BeoCenter AV5 to display the time in the display whenever it is switched on only inter rupted by the operations you undertake Note If you have synchronised with Teletext the clock in BeoCenter AV5 will be updated automatically and change to Summer and Winter time automatically Showing the clock on the display In order to display the clock on the BeoCenter AV5 you press LIST on Beo4 until CLOCK is revealed in the Beo4 display Then press GO to display the clock The clock remains on the display until you perform another operation for example press TV If you wish to remove the clock from the display press LIST to display CLOCK
4. INTRODUCING BEOCENTER AV5 BeoCenter AV5 is an audio video system with a built in CD player and a FM Radio The BeoCenter AV5 delivers excellent sound and picture quality As the speakers unfold you will be surprised and amazed over their construction and not least their sound With BeoCenter AV5 you have the ability to distribute sound and pictures throughout your home BeoCenter AV5 s simple operation will further amaze you From a distance you can operate all the sources available with ease with the Beo4 remote control This guide explains how User s guide Before you start Two guides are enclosed with the BeoCenter AV5 a User s guide and a Setting up guide We recommend that you or your Bang amp Olufsen dealer follow the instructions in the Setting up guide when you set up your BeoCenter AV5 If you connect auxiliary equipment to your system you must also refer to the Setting up guide for instruction Apart from explaining how to set up and make the system ready for use the Setting up guide also includes maintenance instructions and information which you may need from time to time The User s guide then explains how to tune and preset your BeoCenter AV5 as well as operate the various sources and functions offered by BeoCenter AV5 using the Beo4 remote control USING THIS GUIDE AUTO TUNING Let AV5 tune in your TV stations MEE Lorem ipsum dolor sit amet Lo
5. Press to select the Timer you want m to edit or then Press the Green button to start D editing Edit your Timer in the same way as when you first made it and press GO to store it Delete a Timer in the TIMER LIST Press to select the Timer you qa want to clear from the list or then Press the Yellow button twice gt to clear your Timer from the list es Switching the Timer function on or off Press the PLAY TIMER button on the BeoCenter AV5 close up operation panel to switch the Timer function on or off When the function is switched on the indication PT appears on the display Your BeoCenter AV5 will now be able to execute your Timer play programm ing entries The BeoCenter AV5 display with the Timer function switched on VIDEOTAPE To make an instant recording Press to record from a source 4 i v gt ba fa iw then Press to choose a program number or track if necessary through then RECORD Press to switch the videotape recorder to record pause then RECORD Press to start recording To stop recording V TAPE Press to pause recording STOP then Press to stop recording entirely To record a TV programme while watching another TV programme Press to record a TV programme then Use the number keys to select a TV program number then Press to switch to recording pause then Press to switch to the V Tape tuner then Press to start recording No
6. As the tuning progresses the registered stations appear on the menu For most stations a name is registered automatically See page 14 for instructions of how to use the program list and name a station if necessary Note In order to receive Satellite your BeoCenter AV5 must be especially equipped for Satellite reception If a Satellite station requires a decoder it will be selected automatically during tuning provided the decoder is connected to the dedicated decoder socket on the back of BeoCenter AV5 Due to special circumstances the auto tuning function may fail to tune in particular Satellite stations If this is the case use the manual tuning function to tune in stations see pages 18 19 for further instructions Main setup menu for Satellite SAT SETUP AUTO TUNING PROGRAM LIST UPDATE TUNING ANUAL TUNING Special setup menu for Satellite SAT AUTO TUNING 11 374 FREQUENCY ACTIVATE Menu for auto tuning Satellite stations 11 Press to start tuning in Satellite SAT stations then Press to call up the main setup menu The main SETUP menu for Satellite appears SAT is lit up then Press to call up the menu for Satellite setup The SAT SETUP menu appears AUTO TUNING is lit up Press to call up the menu for auto tuning The SAT AUTO TUNING menu appears Press to start auto tuning Satellite C o stations Pressing STOP stops auto tuning When tuning is comple
7. Let AV5 tune in your Radio stations The BeoCenter AV5 auto tuning function tunes in all your Radio stations automatically Before you call up the menu for auto tuning you must choose Radio as your source You can tune in up to 59 Radio stations As the tuning progresses the registered stations appear on the menu with a program number and a name if any such is registered If a station s frequency appears on the menu you can name the station in the program list which appears on the screen as soon as the auto tuning is completed See page 14 for instructions of how to use the program list Note Names for Radio stations are only registered automatically if RDS is broadcast with the station RDS is a facility which enables Radio broadcasters to transmit information such as a station name along with the station itself If RDS is not broadcast the station s frequency will appear on the menu Note If the auto tuning function fails to tune in a particular Radio station you may have to use the manual tuning function see pages 20 21 for further instructions Main setup menu for Radio RADIO SETUP AUTO TUNING PROGRAM LIST UPDATE TUNING AANUAL TUNING Special setup menu for Radio RADIO AUTO TUNING FREQUENCY 92 8 ACTIVATE Menu for auto tuning Radio stations 13 Press to start tuning in Radio stations then Press to call up the main setup menu MENU The main SETUP men
8. Ut wisi enim ad dignissum qui blandit praesent luptatum zril de lenit augue duis dolore te feugait nulla facilisi im dolor sit amet consec tetuer adipiscing elit sed diam feu gait nulla facilisi Ut wisi enim ad dignissum qui Nam liber tempor cum soluta te nobis eleifend option congue nihil imper diet doming id sit quod mazim place rat facer possim facilisi Consectetuer adipiscing elit sed diam ibh euismod tincidunt The section marked b supports the button sequence Section b includes e The relevant on screen menus which you call up when you follow the step by step button instruction e A text which gives you an additional introduction to the operation in question and provides you with examples of how you could benefit from using the function in question CONTENTS 3 4 Principles of remote operation 52 BeoCenter AV5 close up operation Operating BeoCenter AV5 with Beo4 4 Buttons on the close up operation panel Beo4 operating principles 5 52 Using on screen menus 6 Displayed information 53 Direct access sockets 54 7 Quick guide to daily operations 55 Quick guide to on screen menus 9 Tuning and presetting Auto tuning 9 Using the program lists 14 Manual tuning 16 Update the tuning of your stations 22 Presetting stand positions 23 Setting the clock 24 27 TV Satellite and Teletext Daily operations 28 Teletext 29 Making video recordings via Teletext 35 37 CD CD Audio 38
9. move from space to space Press GO to store the name you have entered Press to remove the menus from screen EXIT 21 22 Select the source where you want to update your tuning e g TV then Press to call up the main setup menu for TV The main SETUP menu for TV appears then Press to select TV and call up the menu The TV SETUP menu appears then GRD Press until UPDATE TUNING is lit up then Press to call up the menu The UPDATE TUNING menu appears SD Press to activate tuning Pressing STOP stops update tuning Once update tuning has been completed the program list appears on the screen automatically Press to remove the menus from the screen UPDATE TUNING Update the tuning of your stations Main setup menu for TV TV SETUP AUTO TUNING PROGRAM LIST UPDATE TUNING MANUAL TUNING Special setup menu for TV TV UPDATE TUNING FREQUENCY 45 ACTIVATE Menu for updating the tuning of your TV stations Since new TV Satellite or Radio stations appear from time to time you may need to update the tuning of your stations The update tuning function tunes in these new stations while the other stations remain the same Once update tuning is completed the program list with the tuned stations appears automatically you can now choose to name edit or move your stations See page 14 for information of how to use the program lists Note As
10. 32 gt Teletext then TEXT LIST then o i Select the program number for which you want subtitles for example 6 and switch to Teletext Find the subtitles page Use the number keys to call up the subtitles page for example 333 The subtitles appear on the screen Press LIST until LARGE is displayed Press to enlarge the subtitles Teletext subtitles Some Teletext broadcasters provide subtitles for their TV or SAT programmes Such subtitles are trans mitted on a specific Teletext page If you want subtitles for a programme find the Teletext page with subtitles the subtitles are then inserted on the TV picture You can enlarge the subtitles on the screen to make them easier to read Note To find the subtitles page use the index page100 Here you usually find a reference to the alphabetical list of contents which lists all available Teletext pages and their appropriate numbers then TEXT then LIST then a e then then Q If it is not switched on already switch to the relevant program number for example 6 Press to call up Teletext Use the number keys to call up the subtitles page for example 333 Press LIST until STORE is displayed Select favourite Teletext page 4 Press to preset the subtitles page on the favourite Teletext page 4 Making the subtitles appear automatically You can make the TV insert subtitles automatically whenever you select a specif
11. again and press GO To set the clock yourself Use the number keys to key in the correct time Check that the data in the menu is correct if not then Press to move from item to item in the menu Press to reveal the correct data Press to store the clock through re 5 then re 4 then o Press to remove the menus EXIT z 5 25 26 TV SATELLITE AND TELETEXT 27 28 29 Daily operations Watching a programme Teletext How to call up Teletext pages Presetting your own favourite Teletext pages Using the basic Teletext functions Teletext subtitles Making the subtitles appear automatically Page update function Using the Fastext or FLOF system Making video tape recordings via Teletext 28 Press to switch on to the TV program number you were last watching SAT Press to switch on to the Satellite program number you were last watching GED Press to step through your program or numbers Gaia HEC ess to select a specific program through number pressing 0 will switch to the HE program number you were last watching To switch displays for a station Press to display the name of the or current station SAT Press TV or SAT again to display the program number us Press LIST until STAND is displayed then SCD Press to turn the BeoCenter AV5 Alternatively BE se the number keys to key ina through pre defined stand position eee Press to
12. improved Teletext which means that the time it takes to call up Teletext pages is reduced The first page which appears is a preset favourite Teletext page the cue MEM1 in the upper left hand corner of the screen indicates this status This page has been preset in your BeoCenter AV5 and always appears when you first switch to Teletext Note If you get a blank page when you press TEXT the station does not currently transmit Teletext Press EXIT or a source button e g TV to leave Teletext Please note The facilities offered by Teletext differ from country to country and even from one Teletext broadcaster to another For details of special facilities we recommend that you consult the information distributed on screen or on paper by your Teletext broadcaster TELETEXT Four favourite Teletext pages MEM1 2 3 and 4 are available for each station which transmits Teletext Teletext pages 100 200 300 and 400 are preset as favourite Teletext pages You can however preset the pages you use most often instead see the next page for further instruction The Index page page 100 preset as MEM1 introduces you to the available Teletext pages and it may help you find the Teletext page you want If this is not the case an alphabetical list of contents is usually available See the following pages for further information about the facilities Teletext offers Press to switch to Teletext Press to step through the fou
13. in to a station using the NICAM stereo system and your TV is equipped with a NICAM stereo decoder Note For a Satellite station you will be able to switch between MONO STEREO MONO STEREO1 MONO2 MONO3 STEREO2 and STEREO3 sound types Note You can store a specific type of sound for a particular station so when you switch on to this station you will hear the sound or language you stored for it Please refer to the manual tuning procedure for both TV and Satellite for further instruction see pages 16 19 How to adjust picture The picture levels in your BeoCenter AV5 are set to neutral values which suit most situations However if you wish you can adjust the levels to your liking Via the menu for picture adjustment you can adjust levels of brilliance colour and contrast for your picture screen The adjustments apply to all your video sources What s on the PICTURE menu BRILLIANCE Adjusts the picture brilliance level COLOUR Adjusts the colour intensity level CONTRAST Adjusts the contrast level in the picture TINT Tint regulation will only be available if NTSC signals are employed Note Changing picture formats If your system has a videotape recorder connected and you are playing a videotape which has been recorded in a wide screen format you can change the picture format on BeoCenter AV5 To do so press LIST until FORMAT is displayed then press A or W or key in 1 or 2 to select FORMA
14. mono sound frequency LEFT FREQ RIGHT FREQ Indicates the left and right frequencies The items are only available if you have chosen STEREO as your sound option Once a frequency is selected for LEFT the RIGTH frequency is changed and set automatically Use A or W to reveal options or use the number keys to key in values BANDWIDTH The following options are available 130 kHz 280 kHz and 450 kHz Use A or to reveal options If SOUND is set to STEREO the bandwidth is set to 130 kHz automatically and it will not be possible to select the item DEEMPHASIS In order to achieve the best possible sound you may have to deemphasise the sound signal so that it corresponds to the degree to which it was preemphasised when it was transmitted Select the appropriate option 50 75 or J17 EXPAND To achieve the best possible sound you may have to expand the sound signal Typically applies when the transmitted sound is a stereo signal The function compensates for the deviations which the sound elements bass and treble undergo during transmission To activate the function set EXPAND to ON to deactivate the function set it to OFF SOUND LEVEL Select a sound level for a station As some stations broadcast programmes with different sound levels you can choose to e g turn the preprogrammed sound level down The options NORMAL and LOW are available PICTURE Indicates whether your station is a Satellite Radio or TV
15. pages If you access the Fastext system you will see a colour bar in the upper right hand corner of the screen The colour bar only appears if the Teletext broad caster is providing the Fastext facility Use the buttons on Beo4 to call up the page of your choice red green yellow or blue Making video tape recordings via Teletext If you connect a BeoCord V 8000 video tape recorder to your BeoCenter AV5 you can make Timer recordings directly via the Teletext page listing TV or Satellite programmes You can programme several Timer recordings at the same time Yet the actual programming procedure varies depending on whether the PDC VPS facility in the videotape recorder is activated or not and whether the programme you wish to record is broadcast with PDC VPS signals For further information about Timer recording please refer to the Videotape recorder s own User s guide Note For further information about the PDC VPS facility in connection with Timer recording via Teletext see the following page 0900 Or Hho Special DID OF The Learning Tee pido SAY IT WITH FLOWERS See pod j A Teletext page listing TV programmes with the Timer recording facility activated D30 07T The Learning Iome SAY IT WITH FLOWERS See pldd You have now selected a programme for recording and the Timer recording menu is available for you to check and confirm your recording 35 Press to call up Telet
16. program number you were last tions daily listening to GED Press to step through your program Switching on to Radio program or numbers numbers qm e Switching displays for a Radio rogram number E Pess to select a specific program g BeoC AV5 through number pressing 0 will switch to urning your BeoCenter to E the program number you were last achieve an optimum sound repro listening to duction e Adjusting the volume To switch displays for the current station Press to display the name VTAPE RECORD ATAPE Press again to display the program Instead of displaying the program number number on the BeoCenter AV5 display you can choose to display the name ust Press LIST until STAND is displayed permanently only interrupted by the shen operations you undertake SCD sores to turn the BeoCenter AV5 or You can turn your BeoCenter AV5 with D the Beo4 When STAND is displayed on Alternatively Beo4 you can for example key in a EE Use the number keys to key ina pre defined stand position 9 positions through pre defined stand position are available press 1 for the utmost Eas left position and 9 for the utmost right position Press to adjust the volume p oF Finally you can adjust the volume level and switch the BeoCenter AV5 to Press right on the middle of the standby volume button to mute the sound press again to recall the sound E Pess to switch the system to standby How to adjust
17. s guide for further information about the remote control The Beo 4 display tells you which source or function you are using It also displays extra functions Source buttons for switching on buttons for Audio Video operation and recording Number buttons Teletext and menu control buttons The control buttons within the star shaped button are for winding or selecting for stepping and for accepting and storing information The coloured buttons have special functions it will be specified in this guide when they are needed Volume button LIST button for displaying extra functions and stop buttons TV LIGHT RADIO SAT DVD cD V TAPE RECORD A TAPE Press to switch on to TV then Press to call up the main setup menu The main SETUP menu for TV appears GMD ress to select the item or menu you or want then Press to call up the menu you have chosen The menu appears You may have to select another item on a second menu to get to the menu where you fill in information In a fill in menu SCD Pressto reveal options for an item or or activate a function such as wD nin qa Press to move from item to item in or the menu If it is required Huse the number keys to fill in through information for an item In some menus e g the menu listing your tuned stations you must ED Press the Green or Yellow button to or carry out a function Once you have entered the requ
18. sound The sound levels in your BeoCenter AV5 are set to neutral values which suit most situations However if you wish you can adjust the levels to your liking Via the menu for sound adjustment you can adjust volume balance bass and treble levels and switch the Loudness function on or off What s on the SOUND menu VOLUME Adjusts the volume level You can of course also adjust volume directly by pressing A or v on Beo4 BALANCE Adjusts loudspeaker balance BASS Adjusts the bass tones TREBLE Adjusts the treble tones LOUDNESS The loudness function can be set to ON or OFF the function is used to compensate for the human ear s lack of sensitivity to high and low frequencies when listening to low volume levels It boosts the low and the high frequencies so that the music becomes more dynamic SOUND AND TV TIMER PICTURE SOUND TAND Main setup menu for TV SOUND VOLUME BALANCE BASS TREBLE LOUDNESS OFF Menu for sound adjustment a a Oa De O E gt Select the source where you want to adjust the sound e g TV Press to call up the main setup menu for TV The main SETUP menu for TV appears then Press until SOUND is lit up TEZ then Press to call up the menu for sound adjustment The SOUND menu appears then Press to select an item to adjust TEZ or then Press to adjust the values for an C o item or set LOUDNESS to ON or OFF or then Press
19. station ON Indicates that the picture screen will be switched on for Satellite TV stations OFF Indicates that the picture screen will not be switched on only sound is available for Satellite Radio stations SAT MANUAL TUNING FINE 0 DECODER OFF SYSTEM PAL SOUND 7 02 7 20 MANUAL The second menu for manual tuning of Satellite stations with the option to call up the SAT SOUND TUNING menu SAT SOUND TUNING SOUND STEREO FREQUENCY LEFT FREQ 7 02 RIGHT FREQ 7 20 BANDWIDTH 130 KHz DEEMPHASIS J17 EXPAND OFF SOUND LEVEL NORMAL PICTURE ON The menu for tuning in the sound frequency for Satellite stations Tuning in Radio stations You can tune in your Radio stations yourself Assign them with a program number and a name and determine the type of sound you want for your station What s on the RADIO MANUAL TUNING menu FREQUENCY Frequency for Radio stations PROGRAM Program number 59 Radio program numbers are available ID Name Naming stations 8 characters spaces are available If a station name is broadcast via RDS it appears automatically This name will be updated automatically if a different name is broadcast If no name is broadcast via RDS the Radio frequency appears on the menu If you name a Radio station which has been named already via RDS you will not receive RDS generated information for this particular station Store the station again if yo
20. to store your adjustments Press to remove the menus from the screen 43 44 gt Picture and Sound ust Press LIST until SQUND is displayed then Press to display the current sound The current sound is indicated in the BeoCenter AV5 display then Press repeatedly to switch between the different types of sound and stop when you hear the desired sound Note In order to display SQUND on Beo4 you must add the function to the Beo 4 list of functions please refer to Beo4 s own User s guide and the chapter Customizing your Beo4 for further instruction Switching sound MONO Mono sound FM NICAM STEREO Stereo sound NICAM A2 MONO1 Mono language 1 MONO2 Mono language 2 MONO3 Mono language 3 STEREO2 Stereo language 2 Several types of sound may be available for the TV or Satellite programme you are watching for example both Stereo and Mono sound or two or three different languages While you are watching a programme you can switch between the types of sound currently available If you are watching a multi language TV programme you can switch from one language to another The various types of sound which are available will be displayed on the BeoCenter AV5 display as you select them These types of sound may not all be available on any one TV station you can choose to hear the various types of sound currently transmitted Mono Language 3 and Stereo Language 2 are only available if you are tuned
21. APE on the main setup menu for V Tape and press GO to call up the menu then operate the videotape recorder s menus as instructed in the User s guide for your videotape recorder To access the other menus or functions on the main setup menu for V Tape press A or W to select the items and GO to call up the appropriate menu BEOCENTER AVS5 Press to switch to TV or Press to play a CD or Press to switch on to Radio Then operate your BeoCenter AV5 as usual Using main room audio or video sources SAT Press to switch to Satellite or Press to switch on a videotape recorder Continue to operate the sources in the usual manner If you want to transfer audio or video sources from your main room system to your link room system then ust Press LIST until LINE is displayed then Press to watch TV or Press to listen to a CD Hi ress to switch your BeoCenter AV5 to standby or HES Press and hold down for two seconds to switch off your entire system AND BEOLINK Using BeoCenter AV5 in a BeoLink system Main room system Link room system If you have a BeoLink system installed in your home which enables you to distribute sound and or pictures throughout your home and choose to place your BeoCenter AV5 in a link room you simply operate your BeoCenter AV5 as usual Yo
22. CORD RECORD If you wish to stop your recording press V TAPE and then STOP twice Note In order to display Al on Beo4 you must add the function to Beo4 Please refer to Beo4 s own User s guide for further instruction Instant recording from Camcorder If you wish to make an instant recording from your Camcorder onto video tape e Connect your Camcorder e Switch on the BeoCenter AV5 e Now switch on your Camcorder e Then press RECORD RECORD to start recording To stop your recording press V TAPE and then STOP twice See page 54 for information of how and where to connect a Camcorder to BeoCenter AV5 Please Note With a BeoCord V 8000 connected to your BeoCenter AV5 you can also programme a Timer video recording via Teletext please refer to page 35 for further information E Main setup menu for videotape recorder In the BeoCenter AV5 menu system a main setup menu also exists for V Tape V TAPE TIMER This main setup menu gives access to PICTURE the videotape recorder s own menu SOUND system as well as the menus which are ZAND available for your BeoCenter AV5 CLOCK AV SOCKET The menus for sound and picture adjustment presetting of clock and Main setup menu for V Tape stand positions as well as the Timer programming function and the menu for registering auxiliary Audio Video equipment are available To call up the videotape recorder s own main menu Just select the item V T
23. F SOUND STEREO This illustration displays the principle of the BeoCenter AV5 on screen menu system The displayed menus are available for the source TV CLOCK 20 00 FRI 10 SEPTEMBER 1996 A similar range of menus are available for all the BeoCenter AV5 sources Depending on the way you set up your BeoCenter AV5 more menus may be available AV SOCKET To get from one menu to another you select an item on the main menu and press GO to call it up V TAPE2 V TAPE2 DECODER2 S V TAPE2 Date purchased Contact person Dealer Telephone Address Record your serial numbers here BeoCenter AV5 Beo4 remote control Dear Customer Your needs as the user of our products are always given careful consideration during the design and development process and we strive to make our products easy and comfortable to operate We therefore hope that you will take time to drop us a line telling us about your experiences with your Bang amp Olufsen system Anything which you consider important positive or negative may help us in our constant efforts to refine our products Thank you Please write to Customer information dept 7240 Bang amp Olufsen als DK 7600 Struer Denmark 3508148 0998 Printed in Denmark by Bogtrykkergarden a s Struer
24. G Special setup menu for TV TV AUTO TUNING FREQUENCY 210 ACTIVATE Menu for auto tuning TV stations The BeoCenter AV5 auto tuning function tunes in all your TV stations automatically Before you call up the menu for auto tuning you must choose TV as your source You can tune in up to 79 TV stations As the tuning progresses the regis tered stations appear on the menu For most stations a name is registered automatically If a station appears without a name you can name the station in the program list which appears when the auto tuning of stations is completed See page 14 for instructions of how to use the program list Note If a station requires a decoder it will be selected automatically during tuning provided the decoder has been connected to the dedicated decoder socket on the back of BeoCenter AV5 Note If the auto tuning function fails to tune in a particular TV station you may have to use the manual tuning function see pages 16 17 for further instruction Let AV5 tune in your Satellite stations Please note If your Satellite arrangement includes a motorised dish please refer to the following page for further information before you start your auto tuning The BeoCenter AV5 auto tuning function tunes in all your Satellite stations automatically Before you call up the menu for auto tuning choose Satellite as your source You can tune in up to 119 Satellite stations
25. HC Vse the number keys and key in an through exact track number ma SCD Press to search forwards on a CD or GED Press to search backwards on a CD While a track is being played LIST Press LIST until COUNTER appears ust pp then Press to display the elapsed track time in the display List ress until is displaye P LIST until STAND is displayed then SCD Press to turn the BeoCenter AV5 or D Alternatively BE Vse the number keys to key ina through pre defined stand position ma Press to pause playback Press CD or GO to resume playback e Q e Press to switch to standby CD AUDIO Daily operations To play your CDs load it and start playback On the BeoCenter AV5 display the number of tracks available on your audio CD will be displayed You can now choose to step through the tracks play a specific track or search backwards or forwards on the CD It is also possible to have the elapsed track time displayed for a current track To ensure an optimum sound repro duction turn the BeoCenter AV5 with Beo4 so that it faces you You can pause CD playback or press the standby button on Beo4 to stop the CD player completely Note If you leave the CD compartment open it will close automatically after 5 minutes Pressing the LOAD button on the BeoCenter AV5 close up operation panel opens the CD compartment press again to close the compartment If you press CD to start playback
26. Other CD formats 40 42 Radio Daily operations 42 43 Sound and Picture 46 Timer function Using the Timer function for play or standby 46 48 Videotape recording 50 BeoCenter AV5 and BeoLink PRINCIPLES OF Your Beo4 remote control commands are registered by a small receiver in the display bar placed on top of BeoCenter AV5 to the right REMOTE OPERATION Operating BeoCenter AV5 with Beo4 Before you start operating BeoCenter AV5 it may be a good idea to famil iarise yourself with the Beo4 operating principles Your BeoCenter AV5 is designed for remote operation using the Beo4 remote control Most operations are carried out via the Beo4 remote control The somewhat more advanced functions in the BeoCenter AV5 are guided by menus which you call up on the screen see pages 6 7 Beo4 furthermore integrates remote operation of your BeoCenter AV5 and the daily functions in other recent Bang amp Olufsen systems Note A few functions are operated directly on the small operation panel on the back of the BeoCenter display bar Please refer to BeoCenter AV5 close up operation pages 52 54 for further information Nice to know about Beo4 buttons In the step by step operating sequences shown in this guide the buttons on the Beo4 and cues in the Beo4 display will be illustrated like this Rectangular buttons for source control numbers and dedicated functions such as Teletext and m
27. Press to step through stored qa program numbers or tracks or Adjusting volume Press to raise the volume Press to lower the volume Pressing the Volume button right on the middle silences the speakers press again to recall the sound Press to switch to the system to oe standby TUNING AND PRESETTING 9 10 Auto tuning Let AV5 tune in your TV stations Let AV5 tune in your Satellite stations Let AV5 tune in your Radio stations 14 Program lists Using the program lists Naming a station Moving or clearing a station 16 Manual tuning Tuning in TV stations Tuning in Satellite stations Tuning in Radio stations 22 Update tuning Update the tuning of your stations 23 Stand Setting your favourite stand positions 24 Clock Setting the clock 10 Press to tune in TV stations then Press to call up the main setup menu The main SETUP menu for TV appears TV is lit up then Press to call up the menu for TV setup The TV SETUP menu appears AUTO TUNING is lit up Press to call up the menu for auto tuning The TV AUTO TUNING menu appears SD sO ress to start auto tuning TV stations Pressing STOP stops auto tuning When auto tuning is completed the program list with the tuned stations appears automatically Press to remove the menus from the screen AUTO TUNING Let AV5 tune in your TV stations Main setup menu for TV TV SETUP AUTO TUNING PROGRAM LIST UPDATE TUNING ANUAL TUNIN
28. T 1 Regular picture or FORMAT 2 Soft wide screen picture directly Note In order to display FORMAT on Beo4 you must add the function to the Beo 4 list of functions please refer to Beo4 s own User s guide and the chapter Customising your Beo4 for further instruction TV TIMER PICTURE SOUND Main setup menu for TV PICTURE BRILLIANCE COLOUR CONTRAST Menu for picture adjustment Press to call up the source you want to adjust picture levels for e g TV Press to call up the main setup menu for TV The main SETUP menu for TV appears then Press until PICTURE is lit up qa then Press to call up the menu for picture adjustment The PICTURE menu appears BRILLIANCE is lit up already then Press to adjust BRILLIANCE C o or D Press to select the other items Ga then Press to adjust the values FP g or D then Press to store your adjustments Press to remove the menus from the screen 45 46 Select the source you wish to make a Timer for e g TV then Press to call up the main setup menu for TV The main SETUP menu for TV appears then GRD Press until TIMER is lit up then Press to call up the menu for Timer play or standby The TIMER menu appears GMD _ ress to select the items on the or menu then SCD sess to reveal values for the or items e g select program number D and HSCs se the number keys to key in start through and s
29. adjust the volume or Press right on the middle of the volume button to mute the sound press again to bring the sound back HE ress to switch to standby DAILY OPERATIONS Watching a programme You will be using the following opera tions daily e Switching on to TV program numbers e Switching on to Satellite program numbers e Switching displays for TV or Satellite on the BeoCenter AV5 display e Turning your BeoCenter AV5 to adjust the viewing angle e Adjusting volume e Switching the system off To carry out these operations use the Beo4 remote control Instead of displaying the program number on the BeoCenter AV5 display you can choose to display the name of a station only interrupted by the operations you undertake Note Satellite is only available if your BeoCenter AV5 is especially equipped for Satellite reception You can turn your BeoCenter AV5 with the Beo4 by keying in a pre defined stand position 9 positions are available press 1 for its utmost left position and 9 for its utmost right position Finally you can adjust the volume level and switch the BeoCenter AV5 to standby Note If you wish to just listen to a video source TV Satellite or V Tape without pictures on the screen press AV before you press TV SAT or V TAPE How to call up Teletext pages If the station you are currently watching transmits Teletext you press TEXT on Beo4 to call up Teletext BeoCenter AV5 offers
30. age 2 Note MONO3 and STEREOZ2 are only available if a NICAM stereo system decoder is built into your BeoCenter AV5 Even though you store your preferred type of sound language in this way you may still switch between the various types of sound while you are watching this TV station See page 44 Switching sound for further instruction To name a station Press to move to ID o Press the Green button to start naming Press to reveal the first character in a name o Press to move to the next character spaces Press A or to reveal the second character or a preset name if no name is available move to the next character space and reveal the appropriate characters Press to store your station and GO if you wish continue tuning To fine tune make decoder or sound selections for your station Press repeatedly to call up to the second manual tuning menu The second TV MANUAL TUNING menu appears Use W or A to move to the other items and press lt 4 or gt P to reveal options for an item Press to store and return to the first tuning menu then Press to store your station Continue to tune in stations Or Press to remove the menus from screen EXIT 17 18 gt Manual tuning Satellite tuning SAT Press to select Satellite then Press to call up the setup menu The main SETUP menu for SAT appears then Press to select SAT and call up the menu The SAT SETUP menu ap
31. and the compartment is empty it will open automatically and the BeoCenter AV5 display will prompt you to load a disc Remember to load the CD with the text side showing Playing tracks in a random order You can choose to play all the tracks on a CD in random order The random order playback function can be set to on or off When the function is switched on RANDOM appears in the BeoCenter AV5 display If you want to overrule the random order playback sequence in order to hear a specific track simply key in or step to the relevant track number Once this track is finished the random order playback sequence will continue When all the tracks have been played once the CD player stops waiting for another instruction to play If you wish you can combine the random order playback function with the repeat playback function which would mean that your random order playback sequence will be repeated for up to 4 hours See Repeated CD playback for further information To start random order playback of CD tracks Repeated CD playback You can make the CD player play a CD over and over again for up to 4 hours You can set the repeated playback function to on or off When the function is switched on REPEAT appears in the BeoCenter AV5 display If you switch the repeated playback function on before you have started playback of a CD the function will start playback If you wish you can combine the repeated playba
32. cation Whereas STOP acts as a pause button In order to leave your application press another source button e g TV or press the Standby button to switch off the entire system Note If the CD format you have loaded is not supported by your BeoCenter AV5 the CD compartment opens again and the display prompts you to load another CD CD configuration Most of the CD formats supported by BeoCenter AV5 can be loaded and played directly If for some reason you need to apply a different configuration to your CD application you must use the menu for CD configuration What s on the CD CONFIGURATION menu CD I PAL and NTSC are available for this item select the appropriate PAL or NTSC system for your application PHOTO CD NTSC and PAL are available for this item Applies to Photo CD applications they are loaded in NTSC in order to produce a flicker free picture but you can choose the PAL standard instead of NTSC in order to get a picture which is less cropped VIDEO CD PAL and NTSC are available for this item select the appropriate PAL or NTSC system for your application MIX MIX applies to CDs which include both sound and some graphics If you wish to simply listen to such a CD without any pictures or graphics on the screen set MIX to AUDIO If you wish to see the graphics set MIX to CD I CLEAR AUTO and MANUAL are available for this item If you wish to call up the CD STORAGE LIST to delete i
33. ck function with the random order playback function To do so switch both functions on Now the random order playback sequence will be repeated for up to 4 hours Press LIST until RANDOM is ust displayed then Press to start random order playback or ap To cancel random order playback Press LIST until RANDOM is Loos displayed then Press to cancel random order ea playback To start repeated playback of a CD Press LIST until REPEAT is ust displayed then Press to start repeated playback or aw To cancel repeated playback Press LIST until REPEAT is LosT displayed then Press to cancel the repeated TEZ playback function Note In order to display REFEAT on Beo4 you must add the function to the Beo4 list of functions please refer to Beo4 s own User s guide and the chapter Customising your Beo4 for further instruction 39 40 Press the LOAD button on the close up operation panel to open the CD compartment and load your CD press LOAD again to close the compartment Press to start a CD Follow the instructions on the CD To move a cursor on the screen GED Press to move the cursor upwards Gap Press to move the cursor downwards SCD CCP ress to move the cursor to the right GED CPs to move the cursor to the left When it is appropriate or required Press to activate play or a function or GD Press the Green action button 1 to activate a function or lt p Press the Ye
34. e g your main room TV set are not transferred to your BeoLink connected sets You have to preset your favourite Teletext pages on all your TV sets Note For further information about the BeoLink system which allows you to distribute sound and or pictures throughout your home please contact your Bang amp Olufsen dealer Using the basic Teletext functions Once you have found the Teletext page you want there are various facil ities at your disposal which make it easier for you to read the page To use each of these functions listed on this page follow the instructions shown to the right STOP SUBPAGE You can use this function when you call up a Teletext page with subpages A Teletext page can have a large number of subpages The subpages are identified by a 4 digit subcode To retain a subpage which would otherwise turn automatically press STOP Step through the subpages by pressing A or W or key in the number of the subpage The pages you have retained will not be released until you press STOP again press gt gt to choose a favourite Teletext page or press TEXT to leave subpage mode LARGE You can enlarge the text so that it is easier to read from a distance By pressing GO repeatedly you can enlarge the Teletext page on the screen the upper half of the page appears first then the lower half of the page You return to normal page size by pressing GO while LARGE is still displayed in the Beo4 display
35. enu operation GED Buttons within the star shaped button for stepping selecting or winding The circular GO button is for accepting and storing instructions a The coloured buttons within the star shaped button are used for special functions it will be explained when and how to use them ust i The double button LIST means press repeatedly to reveal more cues or functions in the Beo4 LIST of functions STAND The cues or functions in the Beo4 display indicate either the current source or operation you are addressing or an extra function which you call up by pressing LIST Beo4 operating principles The Beo4 remote control is divided into 5 areas Each area has its own dedicated functions The buttons are arranged so that your operation of the various functions in BeoCenter AV5 is made as simple and clear as possible The Beo4 display reads out which source or function you are controlling but if you press the LIST button the cue on the display changes and reveal more functions or buttons available for the operation of BeoCenter AV5 Note If some operations require a function or button which is not already available when you press the LIST button you can add the function to your Beo4 and rearrange the order in which all the extra functions on Beo4 appear please refer to Beo4 s own User s guide and the chapter Customising your Beo4 for further instruction Note Please refer to the special Beo4 User
36. ext Call up the Teletext page listing TV or SAT programmes then Press to access the Timer recording function The start of the first programme is highlighted then Press to move the cursor and select Ga the start time of the programme you or want to record p oA g Alternatively press P gt or 44 to move the cursor then Press to accept the start time Check the stop time then Press to accept the stop time The Timer recording menu appears over the page 22 00 23 00 30 JAN P10 BBC OK If the data is not correct use P gt or 44 to move and the number keys or A or to enter the correct data Press STOP to cancel the function without storing any information then The relevant start and stop times of your recording s and the indication RECORD are displayed above the page Press to store the Timer recording Continue to select programmes for Timer recording Or Press to leave Teletext EXIT 36 gt Making Videotape recordings via Teletext PDC VPS facility and Timer recording The PDC VPS facility in your videotape recorder enables you to make use of the PDC Program Delivery Control and the VPS Video Programming System broadcasting signals accompanying programmes in some countries The facility can be set to On or Off via the videotape recorder s setup menu The PDC VPS facility ensures that a programme accompanied by the PDC VPS signals will be recorded in its full length even if
37. h a particular TV programme on a particular day When you make your Timer choose the source you wish to make a Timer for Choosing where when and how often you want your Timer to take place will be your next choices Once your Timer is stored it is listed in the TIMER LIST shown on the same menu Via the TIMER LIST you can edit or clear your Timer If you wish to clear a Timer at a later date return to the menu for Timer play or standby and clear the Timer in question as described in the button sequence to the far right of this page Note If you wish to make a Timer which switches the entire system off no matter which source is playing switch BeoCenter AV5 to standby and then press MENU to call up the main setup menu On the TIMER menu BeoCenter AV5 writes Mor MON for Monday T or TUE for Tuesday W or WED for Wednesday T or THU for Thursday F or FRI for Friday S or SAT for Saturday S or SUN for Sunday and JAN for January FEB for February MAR for March APR for April MAY for May JUN for June JUL for July AUG for August SEP for September OCT for October NOV for November DEC for December Or select a single date for your Timer Move to DAYS then Press the Green button to be able SS to choose a single date then Press to choose the date for your lt O Timer or then Press to store your selection Edit a Timer in the TIMER LIST
38. hile you are watching your Camcorder recordings the signal from the Camcorder will be switched off To bring the signal back just switch off the Camcorder and then switch it back on again The pictures from your Camcorder recordings should now appear on the screen again BeoCenter AV5 direct access socket panel Just below the close up operation panel you will find a small socket panel conveniently placed for connection of headphones Camcorder pointing devices and keyboard INPUT 1 and 2 The sockets marked INPUT 1 and 2 are for connection of various pointing devices When you connect a pointing device you must make sure that BeoCenter AV5 is switched to standby before you connect or disconnect the device If you wish to connect a CD i keyboard to BeoCenter AV5 you must connect it to the socket marked INPUT 1 QUICK GUIDE TO ON SCREEN MENUS 55 SETUP TV SETUP TV AUTO TUNING TV AUTO TUNING FREQUENCY 210 TIMER PROGRAM LIST PICTURE UPDATE TUNING ACTIVATE SOUND MANUAL TUNING gt STAND TV PROGRAM LIST TV TIMER 1 DR CLOCK 2 TV2 AV SOCKET PROGRAM 5FILMNET 3 ZDF START 10 00 4 EURO STOP 11 00 gt s MTWT TV UPDATE TUNING PUCTURE FREQUENCY 45 BRILLIANCE mememe ss sees COLOUR Wee ACTIVATE CONTRAST me ons TV MANUAL TUNING FREQUENCY 210 PROGRAM 10 ID EURO SOUND VOLUME mnes BALANCE eee ee NSS Se TREBLE ee TV MANUAL TUNING FINE 0 DECODER OF
39. ic program number The procedure involves calling up the program number you want subtitles for and then Teletext Now find the subtitles page and store it on favourite Teletext page number 4 MEM4 Note If you no longer want the Teletext subtitles to appear automatically on the program number concerned simply store another Teletext page on favourite Teletext page number 4 see page 30 for further information about favourite Teletext pages Page update Teletext function You can ask to be reminded as soon as a specific Teletext page is available or any changes occur on a page To do so call up Teletext and key in the number of the Teletext page you want then select the update function on Beo4 and return to watching TV undisturbed The cue FOUND appears on the screen when the page you want to see is found When the page is updated the cue UPDATE appears on the screen If you want to see the Teletext page straight away press GO Note While you are watching TV waiting for the cues to appear on the screen do not forget that BeoCenter AV5 is still in Teletext mode This means that if you for example key in a number the TV will interpret this as if you are asking for a Teletext page it starts searching for the page and the update function is cancelled Call up the Teletext then Use the number keys to key in the o O number of the relevant page through E then Press LIST until UPDATE is displayed u
40. ired information Press GO to store the information you entered ON SCREEN MENUS Using on screen menus TV TIMER PICTURE SOUND STAND Main setup menu for TV TV gives access to tuning of stations and the program list which lists the tuned stations TIMER for programming your BeoCenter AV5 to switch on or switch to standby automatically PICTURE for adjusting the picture SOUND for adjusting the sound STAND for turning your BeoCenter AV5 and presetting stand positions CLOCK for setting the BeoCenter AV5 inbuilt clock AV SOCKET for registering any extra equipment connected to your BeoCenter AV5 CLOCK TIME DATE MONTH YEAR 20 00 FRI 10 SEPTEMBER 1996 TEXT TIME SPLAY DR YES Example of a fill in menu the menu for setting the clock Your BeoCenter AV5 on screen menu system will assist you when you have to carry out the more advanced functions for BeoCenter AV5 such as tuning or presetting values for the system To get access to the on screen menus you must call up the main setup menu Each source TV Satellite CD and Radio has its own main setup menu Each item in a main menu then gives access to a menu for a particular function In some menus you must fill in infor mation e g key in numbers or browse through available options for a particular item The content of some of these menus change when you select specific items Thi
41. llow action button 2 to activate a function Apply in some applications GED Press the Blue button to move to the next step or function or GED Press the Red button to move back to the previous step or function Press to pause your application HS ress to switch the system to standby OTHER CD FORMATS Operating other CD formats with Beo4 The BeoCenter AV5 supports a range of CD formats such as PHOTO CD and CD i s The operation of these other formats depends on the individual applications If you choose to operate any of these other formats with Beo4 you can use Beo4 to guide the directions of a cursor on the screen Beo4 also includes action buttons GO on Beo4 acts as action button 1 which selects and activates hotspots or functions in an application The Green and the Yellow button also act as action buttons action button 1 and 2 respectively In some applications the action buttons are used interchangeably whereas they may have different functions in other applications Note It is also possible to connect pointing devices to the BeoCenter AV5 Even though you connect such a device you can still operate an application with Beo4 Please refer to Direct access sockets on page 54 for further information of where to connect such devices The Blue and the Red button on Beo4 represent the functions Next and Previous respectively allowing you to move forwards or backwards in your appli
42. long as the number of stations does not exceed the number of program numbers available the new stations will be stored on program numbers higher than the program numbers which have already been taken up by other stations STAND Setting your favourite stand positions You can preset two positions for BeoCenter AV5 to turn to via the menu for stand positions You can preset the BeoCenter AV5 to automatically turn to your favourite viewing position when you switch it on and automatically turn to a particular standby position when you switch it off Turning BeoCenter AV5 directly You can also turn your BeoCenter AV5 directly via your Beo4 remote control without calling up the STAND menu Press LIST until STAND is displayed on the Beo4 display then use the P gt or 44 buttons to turn BeoCenter AV5 or key in a number from 1 to 9 to turn to a pre defined position 1 represents the utmost left position and 9 the utmost right position TV TIMER PICTURE SOUND STAND Main setup menu for TV 1 9 2 3 324 5697 E Menu for presetting stand positions two positions are available a position for when it is switched on ON and a position for when it is switched to Standby STBY The positions you store are indicated on the menu Press to select TV then Press to call up the main setup menu The main SETUP menu for TV appears then Press repeatedly to select STAND TEZ then Press to call up the me
43. n your Satellite stations yourself Assign them with a program number as well as a name and if necessary determine whether a decoder should be cut in You can furthermore choose a type of sound or language you wish to store for your station Note If your ODU Outdoor Unit setup includes an external Positioner the item POSITION will be available on the menu for manual tuning of Satellite instead of LNB To adjust the position of your ODU setup select POSITION and use gt gt or lt 4 to adjust Note In order to be able to receive Satellite your BeoCenter AV5 must be especially equipped for Satellite reception What s on the SAT MANUAL TUNING menu FREQUENCY Indicates the Satellite SAT frequency POLARITY Select best picture quality POLARITY can be set to HOR for Horizontal polarization VERT for Vertical polarization 00 63 for numerical indication of polarization relevant only if polarity is set to Skew in the special ODU setup menu Note For further information about the ODU Out Door Unit setup menu please refer to the ODU Setting up guide LNB Low Noise Block Converter The following options are available ASTRA 1 WEST HOT BIRD UNI LNB TELECOM SMATV CUSTOM and NONE The LNB options you choose will appear in the manual tuning menu for Satellite PROGRAM Program number 119 program numbers are available ID Name Naming stations Reveal a preset name for you
44. nformation stored from your CD applications set CLEAR to MANUAL the item will then be available the next time you select CD in the main setup menu for CD If CLEAR is set to AUTO the entries will be deleted automatically and you will have no access to the CD STORAGE LIST whatsoever Main setup menu for CD CD CONFIGURATION CD I PHOTO CD VIDEO CD MIX EAR PAL NTSC PAL CD I AUTO Menu for CD configuration Nice to know about CD STORAGE LIST If you access the STORAGE LIST you can delete the information stored from the CD applications you have played The information stored from each application takes up very little space though so the BeoCenter AV5 memory has enough capacity to store an extensive number of entries To operate the CD STORAGE LIST use the Beo4 buttons to guide the cursor and activate the functions with the Beo4 action buttons Press to select CD as your source then Press to call up the main setup menu for CD The main SETUP menu for CD appears CD is lit up already Press to select CD and call up the menu for CD configuration The CD CONFIGURATION menu appears Press to step from item to item in Loy the menu or then Press to reveal options for an e o item or then Press to store your options Press to remove the menus from the screen 41 RADIO Daily operations Press to switch on to the Radio You will be using the following opera
45. nu for stand positions The STAND menu appears ON is lit up already To preset a viewing angle for BeoCenter AV5 to turn to when you switch it on Press to turn BeoCenter AV5 to your F lt 3 desired viewing position or Alternatively Use the number keys 1 9 to P choose a pre defined position through If you wish to preset a position for Standby too Press to select STBY in the menu qa then Press gt gt or 44 to turn to your desired standby position or use the number keys 1 9 to choose a pre defined position then Press to store your stand positions Press to remove the menus from the screen Press to select TV then To synchronise with Teletext time Select a national TV station by HM keying in its program number e g 12 then Press to call up the main setup menu for TV The main SETUP menu for TV appears then GRD Press repeatedly to select CLOCK then Press to call up the menu The CLOCK menu appears TIME is already lit up GRD Press repeatedly to select TEXT TIME SCD Press to reveal the name or or program number of the current SD CONV station Make sure that the correct date is displayed if not use A or W to move to the relevant items in the menu and use PP or lt 44 to set the date then Press to synchronise the time and store the clock CLOCK Setting the clock TV TIMER PICTURE SOUND STAND CLOCK KET Main setup menu for TV CLOCK
46. oder number 2 is only available when the PAL broadcast system is in use 19 SYSTEM Indicates Satellite broadcast system You can switch between the following systems PAL MAC BB BaseBand PAL OBW Optional bandwidth MAC OBW or BB OBW Note if you set SYSTEM up to any of the MAC or BB options it will not be possible to select or set options for SOUND unless you have set DECODER to ON V in this second Satellite tuning menu SOUND Mono Stereo Language Several types of sound may be available for a particular Satellite station mono stereo or several different languages Alternatively you may have to call up a manual sound tuning menu to tune in the appropriate sound frequency Switch between the sound options currently transmitted for your Satellite station until you hear the sound you wish to store Note Even though a preferred type of sound language is stored you can still switch between the different types of sound available for a programme See Switching Sound on page 44 for further information Note Call up the SAT SOUND TUNING menu by pressing the Green button on Beo4 when SOUND is highlighted See next page for further information about the manual sound tuning menu 20 gt Manual tuning Satellite tuning What s on the SAT SOUND TUNING menu SOUND Stereo and Mono sound are available Use A or Y to reveal either option FREQUENCY Only applies for when Mono sound is selected Tune in the
47. pears then GRD Pess until MANUAL TUNING is lit then up Press to call up the menu The SAT MANUAL TUNING menu appears SCD Pess to start tuning e s Or key in the exact frequency Pressing STOP stops tuning Once a station is found Press W or A to move from item to item use PP or 4 amp 4 or the number keys fill in the required information To name a station move to D Press the Green button to name then Use A or to reveal characters or preset names and use P gt or 44 to move to the next character space Once you have entered the required information Press to store your station Press GO repeatedly until the SAT SETUP menu appears Tuning in Satellite stations Main setup menu for Satellite SAT SETUP AUTO TUNING PROGRAM LIST UPDATE TUNING MANUAL TUNING Special setup menu for Satellite SAT MANUAL TUNING 11 374 HOR ASTRA 10 FILMNET FREQUENCY POLARITY LNB PROGRAM ID Menu for manual tuning of Satellite stations SAT MANUAL TUNING FINE DECODER SYSTEM SOUND 0 OFF PAL 7 02 7 20 The second menu for the manual tuning of Satellite stations Please note Before you start tuning in Satellite stations make sure that the correct broadcast system is displayed Call up the second manual tuning menu for Satellite If the correct system is not displayed enter the correct system You can tune i
48. r preset favourite Teletext pages Use the number keys to select a specific page for example 302 Or alternatively Press to step to the next available page Press to step to the previous page Press to leave Teletext or press TV to return to watching TV TEXT N w e e 3 EXIT 29 30 gt Teletext Presetting your own favourite Teletext pages Press to call up Teletext Four special favourite Teletext pages By presetting your own favourite Bid dace a iatite dale are available for each station which Teletext pages you will obtain greater favourite Teletext page transmits Teletext These pages canbe benefits when using the Teletext infor accessed directly and quickly mation system List Press LIST until STORE is displayed then The Teletext pages 100 200 300 and Press to preset the current page as 400 are preset as the four favourite HS for example your favourite Teletext ee then page 1 pages indicated on the screen as MEM1 MEM4 You can change this setup and preset your own favourite Press to leave Teletext Teletext pages which you want direct and quicker access to Preset favourite Teletext pages and BeoLink If you have TV sets connected to your BeoCenter AV5 via the BeoLink system and switch to Teletext the favourite Teletext pages you have preset yourself will only appear automatically on the TV set where they have been preset The favourite Teletext pages you have preset on
49. r station or write a name 8 characters spaces are available When you reveal the first characters an appropriate preset name may appear If no preset name is available then continue to write the name character by character Please note The BeoCenter AV5 Satellite module is preprogrammed with stations from some of the Satellites currently broadcasting What s on the second SAT MANUAL TUNING menu FINE Fine tuning may be necessary to obtain a better reception Fine tune within a range of 7 7 DECODER Indicates the decoder setup Connect a decoder to receive coded Satellite stations If a station is stored with DECODER set to one of the ON options the decoder will be cut in automatically when the relevant station is selected The following options are available ONI AV decoder on where both audio and video signals are coded ONIV decoder on where only video signals are coded Off decoder off for no decoder Select ON AV for most coded stations to get both sound and pictures If only the video signal is coded select ON V If you select ON AV where only the video signal is coded the sound may be lost when the signal is decoded Note If an extra decoder is connected to the AV socket and DECODER 2 is registered in the AV socket menu see the Setting up guide for further instruction select 1 V or 1 AV for Decoder 1 2 V 2 AV for Decoder 2 or OFF for no decoder Dec
50. rem ipsum dolor sit amet consec tetuer adipiscing elit sed diam no MMM consectetuer adipiscing elit sed nummy nibh euismod tincidunt ut basil cl laoreet dolore magna aliquam erat Nonummy nibh euismod tincidunt volupat ut laoreet Ut wisi enim ad dignissum qui blandit praesent luptatum zril de lenit augue duis dolore te feugait nulla facilis Lorem ipsum dolor sit amet consec tetuer adipiscing elit sed diam feu gait nulla facilisi MEE Ut wisi enim ad dignissum qui Nam liber tempor cum soluta te nobis eleifend option congue nihil imper diet doming id sit quod mazim place rat facer possim facilisi Consectetuer adipiscing elit sed diam nonummy nibh euismod tincidunt This illustration exemplifies the different types of information presented in this guide The section marked a gives you a step by step instruction of the operation in question Section a includes e The buttons you must press to complete the operation The buttons displayed correspond to the buttons on the Beo4 remote control e The captions which give you important information The captions must be read in order to complete the operation successfully Let AV5 tune in your Satellite stations Lorem ipsum dolor sit amet consec Lorem ipsum dolor sit amet tetuer adipiscing elit sed diam no nummy nibh euismod tincidunt ut 2 a laoreet dolore magna aliquam erat 2 volupat Nonummy nibh euismod tincidunt ut laoreet
51. s is intended to further assist you in your operation of these particular functions TV LIGHT RADIO SAT DVD cD V TAPE RECORD A TAPE QUICK GUIDE Daily operations Your BeoCenter AV5 supplies you with both audio and video sources You can watch TV or Satellite stations choose to play CDs or listen to the Radio You switch on the different sources by pressing the appropriate source buttons on Beo4 While you are watching or listening to a source you can select the different program numbers or tracks directly or step through all the program numbers or tracks Likewise you can raise or lower the volume and mute the speakers at any time Note In order to receive Satellite your BeoCenter AV5 must be specially equipped for Satellite reception Please contact your Bang amp Olufsen dealer for further information about an built in Satellite receiver Switching on Press to switch on TV Press to switch on Satellite SAT Press to switch on Radio CD operation Open the CD compartment by pressing the LOAD button on the BeoCenter AV5 close up operation panel and load your CD Press to switch on your CD Press to search forward or lt O backward on a CD or Press to pause CD playback or searching Press to stop searching and resume playback Selecting program numbers or tracks Use the number keys to select 0 o O specific program number or select through specific tracks on a CD 9 or
52. s on or not To do so press the PLAY TIMER button on the BeoCenter AV5 close up operation panel PT appears in the display when the function is switched on 52 BEOCENTER AVS PLAY TIMER BeoCenter AV5 close up operation panel The buttons are placed behind the display bar but you will find that they are easy to operate when you stand in front of the system Buttons on the close up operation panel LOAD SAT Press to unload and load a CD in the The SAT button enables you to switch CD compartment on to Satellite and step through the Satellite program numbers available cD The CD button enables you to start TV playing a loaded CD and step through The TV button enables you to switch the tracks on your CD on to TV and step through the TV program numbers available RADIO The RADIO button enables you to switch on to Radio and step through the Radio program numbers available PLAY TIMER Switches the BeoCenter AV5 Timer function on or off It should be set to on if you want a Timer instruction you have programmed into the system to be executed Switches the BeoCenter AV5 to standby CLOSE UP OPERATION 53 BeoCenter AV5 display bar The display bar gives information about the state of the system and conceals the BeoCenter AV5 close up operation panel Displayed information CD track indicator 12 3 45 6 etc TV 12 Status display Indicates all the tracks on the loaded The BeoCenter AV5 sta
53. set name is available then continue to write the name character by character What s on the second TV MANUAL TUNING menu FINE Fine tuning usually the TV tunes to the best possible picture however neighbouring channels may blur the picture slightly Fine tune within a range of 8 8 DECODER A decoder can be connected to the reception of coded TV stations If DECODER is set to one of the ON options the decoder will be cut in automatically when the relevant program number is selected The following options are available for DECODER ONIAV decoder on where both audio and video signals are coded ON V decoder on where only video signals are coded OFF decoder off for no decoder Select ON AV for most coded stations in order to get both sound and pictures If only the video signal is coded select ON V If you select ON AV where only the video signal is coded the sound may be lost when the signal is decoded Note If an extra decoder is connected to the AV socket and DECODER 2 is registered in the AV socket menu see the Setting up guide for further information select 1 V or 1 AV for Decoder number 1 2 V 2 AV for Decoder number 2 or OFF for no decoder SOUND mono stereo language The following types of sound may be available MONO FM NICAM mono sound STEREO NICAM A2 stereo sound MONO1 Mono language 1 MONO2 Mono language 2 MONO3 Mono language 3 STEREOZ Stereo langu
54. st then Press to activate the update function You will now see the TV picture again When the page has been found the cue FOUND appears on the screen When the page has been updated the cue UPDATE appears on the screen then Press to see the updated page Press to leave Teletext mode EXIT 33 34 gt Teletext TEXT then e 3 4 Press to call up Teletext Find a Fastext page A small bar made up of the colours red green yellow and blue indicates that the page is a Fastext page Press one of the four coloured buttons to access the Fastext system An extra line appears indicating the titles of the pages each written in a different colour Press the coloured button that matches the page you want to see Press to leave Fastext mode Press to leave Teletext Using the Fastext or FLOF system A Teletext page with the indication that it is a Fastext page a small colour bar appears in the upper right hand corner of the screen EEE Prine woo Fri B Mow 14 40 62 The titles of the four linked pages appear on top of the page each written in a different colour The Fastext facility also known as FLOF Full Level One Feature is provided by some Teletext broadcasters It enables the user to step directly to any one of four different pages linked to the page currently on the screen The Fastext system helps you find a logical path through the many available Teletext
55. ted the program list with the tuned stations appears automatically Press to remove the menus from the EXIT screen 12 gt Auto tuning Satellite Auto tuning of Satellite equipped with motorised dish If your Outdoor Unit arrangement for Satellite reception includes a motorised dish and an external positioner you must direct the position of the dish to the Satellites you want to auto tune stations from Once the external positioner is connected to your BeoCenter AV5 start the tuning process using the Beo4 e Press SAT then MENU and now press GO to call up the SAT SETUP menu e Press W until MANUAL TUNING is lit up then press GO to call up the menu e Then tune in to a frequency of an appropriate station transmitted by the Satellite you are trying to tune in from e Press W until POSITION is lit up and adjust with lt 4 or gt gt as required e Now press STOP to leave the SAT MANUAL TUNING menu e Then press A until AUTO TUNING is lit up and press GO to call up the SAT AUTO TUNING menu and press PP to start auto tuning stations Repeat the procedure for the stations which are tuned in from other Satellites and adjust the position of the dish as appropriate However in order to keep the stations you have tuned in already and just auto tune the new Satellite stations you must call up the item UPDATE TUNING instead of AUTO TUNING see page 22 for further information about the update tuning function
56. the programme is delayed or prolonged If the PDC VPS facility is set to On and the PDC VPS signals or times are provided by the broadcaster you must programme the exact start and stop times of each programme you wish to record in order for your Timer recording to be successful If you wish to record two programmes in a row you must make two separate Timer recordings If the PDC VPS facility is set to Off recording will start and stop as you programme even if the programme is delayed or prolonged So just programme the start time of the first programme and the stop time of the next one to record two programmes in a row eS BeoCenter AV5 s built in CD player is able to play audio CDs In addition however the CD player accommodates other CD formats such as PHOTO CD or CD i The BeoCenter AV5 will know what type of CD you load Just load it and start playback If you load a CD which is not an audio CD the CD itself will instruct you how to use it 38 39 39 40 41 CD audio Daily operations Playing tracks in a random order Repeated CD playback Other CD formats Operating other CD formats with Beo4 CD Configuration 38 Press the LOAD button on the BeoCenter AV5 close up operation panel to open the CD compartment and load your CD Press to start playing a CD GED Press to select the next track or GMD ress to play the current track again or press twice to play the previous track or
57. tions on the following page MANUAL TUNING Tuning in TV stations Main setup menu for TV TV SETUP AUTO TUNING PROGRAM LIST UPDATE TUNING MANUAL TUNING Special setup menu for TV TV MANUAL TUNING 210 10 EURO FREQUENCY PROGRAM ID Menu for manual tuning of TV stations TV MANUAL TUNING FINE DECODER SOUND o OFF STEREO The second menu for the manual tuning of TV stations Before you start On a multi standard BeoCenter AV5 several broadcast systems may be available for stations so check that the correct broadcast system is displayed before you start tuning otherwise some stations may not appear during tuning To do so call up the second menu for manual tuning of TV stations then select the correct system You can tune in your stations yourself Assign them with a program number as well as a name and if it proves necessary determine whether a decoder should be cut in You can furthermore choose a type of sound or language you wish to store for your station What s on the TV MANUAL TUNING menu FREQUENCY Indicates the TV frequency PROGRAM Program number 79 program numbers are available ID Name Naming stations write a name by revealing the individual characters for each character space 8 characters spaces are available When you reveal the first characters an appropriate preset name may appear If no pre
58. top times Now select days for your Timer GRD Press until DAYS is lit up then a Press the Yellow button to start selecting days then GG Press to exclude the first day from or your Timer T or SCD ress to include the first day in your Timer and move to the next day Continue to exclude or include the days of the week then 0 Press GO twice to store your o selection of days and your Timer sfe TIMER FUNCTION Using the Timer function for play or standby TV TIMER PICTURE Main setup menu for TV TV TIMER PROGRAM START STOP DAYS 5 FILMNET 10 00 11 00 MTWTFSS TIMER LIST store Menu for making a Timer play for TV enter the information for your Timer and when you store it it appears in the TIMER LIST Before you start In order for your Timers to be executed you must switch on the Timer function on the BeoCenter AV5 close up operation panel Timer standby however will be executed whether or not the Timer function has been switched on or not See the following page for further instruction about the Timer function The Timer function enables you to make Timers for your BeoCenter AV5 You can make a Timer which e Automatically switches the BeoCenter AV5 off in the morning when you leave for work e Wakes you up in the morning to your favourite TV Satellite or Radio programme or your favourite CD e Makes sure you do not forget to watc
59. tus display CD only applies to audio CDs up to 25 keeps you informed about what the tracks can be displayed The BeoCenter system is doing or about an on going AV5 display indicates the current operation you are currently source and track preforming Timer on off PT PT indicates that the BeoCenter AV5 Timer function is switched on e Standby indicator The red Standby indicator lights up when you switch off the BeoCenter AV5 34 gt BeoCenter AV5 close up operation Direct access sockets 00000 PHONES R L VIDEO S VHS PHONES Headphones You can connect stereo headphones to the socket marked PHONES Cut out the BeoCenter AV5 loudspeakers by pressing the Beo4 volume button right on the middle Once you remove the headphones press the volume button again to demute the BeoCenter AV5 loudspeakers L R VIDEO S VHS for Camcorder The sockets marked L R VIDEO and S VHS are for Camcorder connections L R sockets For audio connection Left and Right respectively VIDEO socket For the video signal S VHS socket For connection of a S VHS Camcorder or Hi 8 Camcorder only 1 INPUT 2 To watch your Camcorder recordings on the BeoCenter AV5 connect the Camcorder and switch the BeoCenter AV5 on by pressing e g TV on Beo4 Now switch on your Camcorder the signal is automatically registered in your BeoCenter AV5 and the pictures appear on the screen If you switch to e g TV by accident w
60. u can watch and listen to the sources available in your BeoCenter AV5 as well as the sources available in your main room system If you wish to watch or listen to a source from the main room system which is also available in your link room BeoCenter AV5 you must use the Link function to transfer such sources This would apply if you want to watch a decoded TV programme or want to listen to a CD loaded on your main CD player E Note If Satellite and V Tape are available in your link room system inbuilt or connected to BeoCenter AV5 respectively and you want to watch Satellite or V Tape from a main room system you must press LIST repeatedly to find LIHK in the Beo4 display first and then press SAT or V TAPE to watch these sources on your link room system Note In order to be able to display LINK on Beo4 you must add the function to the Beo4 LIST of functions please refer to Beo4 s own User s guide and the chapter Customising your Beo4 for further instruction Timer play or standby and link room system It is not possible to make a Timer play or standby on your link room BeoCenter AV5 However if you have made a Timer play or standby on your main room system remember to switch on the Timer function on your BeoCenter AV5 close up operation panel to be able to execute the Timer on your link room BeoCenter AV5 A Timer standby will be executed on your link room BeoCenter AV5 whether or not the Timer function i
61. u for Radio appears RADIO is lit up already then Press to call up the menu for Radio setup The RADIO SETUP menu appears AUTO TUNING is lit up Press to call up the menu for auto tuning The RADIO AUTO TUNING menu appears Press to start auto tuning Radio lt O stations Pressing STOP stops auto tuning When tuning is completed the program list with the tuned stations appears automatically Press to remove the menus from EXIT the screen 14 Press to select a source e g TV then Press to call up the main setup menu The main SETUP menu for TV appears then Press to call up the menu for TV setup The TV SETUP menu appears then GRD Pess until PROGRAM LIST is lit up then Press to call up the program list for Tv The TV PROGRAM LIST appears GRD _ ress to move down the list or GED ress to move up the list or HE se the number keys to select a through station P To name or rename a station in the list GERD _ ress to select the station you want or to name then GED Press the Green button to name a station then GD Press to display the first character or in a name T then SCD Press to move to the next space and accept the first character See the button sequence on the following page for further instruction PROGRAM LISTS Using the program lists Main setup menu for TV TV SETUP AUTO TUNING PROGRAM LIST UPDATE TUNING ANUAL TUNING
62. u want to make use of the RDS facility To name a station follow the button sequence to the far right of this page FINE Fine tuning may be necessary to obtain a better reception Fine tune within a range of 4 4 The main setup menu for Radio RADIO SETUP AUTO TUNING PROGRAM LIST UPDATE TUNING MANUAL TUNING Special setup menu for Radio RADIO MANUAL TUNING 92 8 4 VIBORG STEREO FREQUENCY PROGRAM ID OUND Menu for manual tuning of Radio stations SOUND Stereo and Mono sound may be available for a particular Radio station Choose your preferred sound mode and store it for your station Press to select Radio RADIO MENU Press to call up the setup menu The main SETUP menu for Radio appears Press to select RADIO and call up the menu The RADIO SETUP menu appears Press until MANUAL TUNING is lit up The RADIO MANUAL TUNING menu appears then then GO then then Press to call up the menu GO Press to start tuning or Or key in the exact frequency Pressing STOP stops tuning Once a station is found press W or A to move to the other items in the menu then Key in a program number e g 12 ii Press GO to store your station or continue to for example fine tune or select a type of sound for your station To name a station Move to D and press the Green button then use A or Y to reveal a character and gt or 44 to
63. veal the second character for this space or find the appropriate preset name If no preset name is available continue to move to different character spaces and write the name et e 0 a Press GO to store the name GO To move or clear a station in the list Select the station you want to move a gt or clear or Press to move the station out next to the list To move the station Press to move it down or up the list to its new program number or ot ot gt a gt oO oO a a ot a gt oO a Press to move the station back into the list If two stations change places now move the old station to another program number Or clear the station Press the Yellow button twice to clear the station Press to remove the menus from the screen EXIT 15 16 Press to select TV then Press to call up the main setup menu The main SETUP menu for TV appears then Press to select TV and call up the menu The TV SETUP menu appears then GRD Press until MANUAL TUNING is lit then up Press to call up the menu The TV MANUAL TUNING menu appears SCD CsPresss to start tuning or D Alternatively key in the exact frequency using the number keys Pressing STOP stops tuning Once a station is found then press W to move to the other items in the menu Key in a program number e g 12 4 Now press GO to store your station Or continue to follow the instruc
64. w switch to another source or TV program number or standby RECORDING Instant recording onto videotape If you have a BeoCord V 8000 video tape recorder connected to your BeoCenter AV5 you can make an instant recording of a programme you are currently watching or listening to While the recording is in progress your recording is protected and you cannot switch on to another program number You can though switch to one of the other sources in your BeoCenter AV5 or switch to Standby If you record directly from the videotape recorder you can though record a TV programme and still be able to watch a another TV pro gramme This is only possible for TV programmes because they are tuned into the tuner in your video tape recorder as well For further information concerning the V 8000 videotape recorder please refer to the videotape recorder s own User s guide Note If you record an audio source the videotape recorder will automatically record at half the usual speed Long Play So you can record uninterruptedly for up to eight hours if you use an E240 tape The sound recorded will be of very high quality Instant recording of simulcast TV and Radio transmissions onto videotape If you wish to make an instant recording of a simulcast transmission onto video tape press TV then LIST until Al is displayed to activate the audio video function and finally press RADIO To record the transmission press RE
65. want in your name For TV or Satellite this character may appear as a part of a preset name which has been entered to make the naming process easier and faster In order to match up the station with an appropriate preset name move to the next space and press A or W to find the second character in a name If a preset name is available for the station in question it may appear automatically and all you have to do is accept this preset name If an appropriate name does not appear you simply move to the next space and repeat the procedure 8 character spaces are available for a name With respect to Radio stations the station s own name may be broadcast via the RDS facility and appear during auto tuning or manual tuning If no name is broadcast the Radio frequency will appear on the list If you choose to name a Radio station which has already been given a name via the RDS facility the information received via RDS will be cancelled for this particular station If you store the station again however the RDS facility will of course apply again TV PROGRAM LIST DR Tv2 a EUROSEEE AuUBWN ARD The program list for TV stations with the naming function activated TV PROGRAM LIST EURO 13 SAT1 15 TV5 4 MOVE SWAP CLEAR The program list for TV stations the station you wish to move to another program number or clear has been moved outside the list Press A or W repeatedly to re

User's guide - Video Game Console Library

Contents

Download Pdf Manuals

Related Search

Related Contents