User Guide - Creative pH
Contents
1. User Swordfish Guide A4 Home Guillotine 3035s Please read the following instructions before operating your guillotine Attach the Safety Guard Ensure the blade is in the locked position Remove the screw from the base using a screwdriver LEED Position the guard into the groove in line with the cutting blade wi Align the hole in the guard with the screw hole in the base Screw the guard in place using a screwdriver see figure A LT PRL a LA Ly LT PAL Ot IAHT LETT LL Attach the Handle Loosen the handle screw with a screwdriver and slide the handle onto the cutting arm see figure B Align the holes and retighten the screw with a screwdriver see figure C Adjust the Paper Guide Unlock the paper guide by turning the lever in line with the channel in the base Slide the paper guide until the flat edge is flush with the vertical measuring line required Lock the guide by turning the lever perpendicular to the channel in the base see figure D Gently lift the handle from the base and raise to upright position f cutting multiple sheets ensure they are perfectly aligned by tapping the stack ona flat surface Slide the paper under the transparent clamping bar and butt paper to top of guillotine To prevent the stack of paper from moving during cutting use your free hand to apply a small amount of pressure to the stack see figure E Gently lower the handle down t2. o provide a smooth accurate cut CAUTION 1 Do not touch the cutting blade It is extremely sharp see figure F e 2 Lock the cutting blade handle when not in use 3 Never use without the Safety Guard in place 4 Keep fingers behind the Safety Guard at all times 5 Keep out of reach of children 6 Do not lock the cutting blade FIGURE F Capacity based on sheets of standard 80g m paper For advice and technical support please go to www swordfishsupport com
Download Pdf Manuals
Related Search