Home

100 Plus User Guide

1. Ensure when the hoist is in use that the surrounding area is the clear and the person being lifted is clear of all objects Overhead Hoist e Hoists should only be used to lift vertically Lifting at an angle will wear the lifting tape prematurely e Do not leave a user unattended in the sling User Guide After use e Return the hoist to the charging position when not in use Battery models only e The outer case mechanical parts and track should only be removed by a qualified service engineer e Do not touch any of the moving parts in the hoist unit or in the track Contact Chiltern Invadex for assistance e Take care when attaching or removing a sling as the carry bar could cause injury if the user is hit in the face e Do not try and lift using the emergency lowering device as this can damage the hoist Powered Traverse Models e For maximum comfort always move the user in one movement and avoid stop starting the hoist Some occupants are reassured if the carer holds them whilst the hoist is traversing T Chiltern Invadex UK Limited strongly recommend that hoists and related products are not used independently Under some circumstances it may be appropriate for the person being lifted or transferred to control the operation themselves however it is recommended that this should always be whilst accompanied by an appropriately trained person The latest version of the hoisting standard ISO 10535 2006 makes the fol
2. every 6 months All inspection and maintenance work must be conducted and certificated by a competent person Daily checks or before use if used infrequently Chiltern Invadex and its Authorised Dealers are able to carry out all aspects of servicing or maintenance work Keep the service record at the back of this booklet up to date DA DO NOT USE IF 1 There is any damage to the hoist 2 There is fraying or stitch damage to the lifting tape or slings Lifting tape wear can vary depending upon application but it is recommended that the tape should be changed at every other service or approximately every two years A worn tape should be renewed regardless of age To ensure maximum cleanliness Slings should be washed in accordance with the instructions on the label sewn into the sling Parts item description aty partno 1 2 Button Hand Control 1 OHHS150 2 4 Button Hand Control 1 3 6 Button Hand Control 1 OHHS151 OHHS152 User Guide Troubleshooting Battery models only symptom suggested cause solution Hoist lacking power Battery power is low Batteries need charging Hoist makes beeping Battery poweris low Batteries need charging sound Red light shows on Battery power is very low Batteries need charging the Hoist Green light on hoist No power Ensure that the power is switched on at the mains Models powered via a white curly cable only symptom suggested cause solution No hoist function No pow
3. Comments 250 aera tra e eos na e o Ra Sa Serviced By company T T ce AEE ESE CONE aa Sa se MAA A O O N AAA AOS vate cua N E a E AE post code Engineers Name please print Signature Palo Load Tested To cseserceererreecer rre Kgs GBI User Guide Serviced By CAMI iO A E E E EE CO dana panos Sha OOOO AA aora RESTO TT post code Engineers Name please print Signature Dale nas scene iron Load Tested To svec Kgs Comments O Matera nea Serviced By company ANNE aaa address Bere reas aa SS AURA IN SOARES NR RR NE ASS ERRADO Sa eee ct O ee A A Se post code Engineers Name please print Signature Dale L Load Tested To Kgs CU A area rsrs pa pn cir S Serviced By COMPANY OIEA acre ACCROSS A a ra E T post code Engineers Name please print Signature Dale vac coords Load Tested To Kgs Comments da oooO Chiltern Invadex Overhead Hoist Serviced By CO T ETA A AA E OO E A OS T ITA A Uso post code Engineers Name please print Signature Date antes Load Tested TO Kgs COMMONS E eee ares Siac ee ee dan ern Rte So od Serviced By company ro parta aS pisada po capos ego PSD caen Address ISS PAUS aa E RO SS AER post code Engineers Name please print Signature Dt ora Load Tested To cccncoonnnonncccnans Kgs A HSE Serv
4. No of Lifts per Charge 60 Battery models Battery voltage 24 vdc Overload cut out lt 150 maximum load All models Hand control Pneumatic hand control Track Aluminium extruded track Low battery indication Audible and visual warning device on hoist On battery models only Clearance dimension Top of track to bottom of carry bar hook at max height is 520mm 600mm up and down cucle with average 70kg 11 3 stone patient weight This is adjustable and should be set by the installer to meet the requirements of the user Typically the carry bar would stop around 300mm from the floor CE Mark The Chiltern Invadex Wispa 100Plus Hoist carries the CE mark and complies with C Directives Medical Devices Directive 93 42 EEC EMC Directive 89 336 EEC Low Voltage Directive 73 23 EEC a 270 350 DAD INN GAAPA SAA DAR e 210 A Coe YY 1920mm with standard lift tape Y Mol 1 22 10 User Guide Warranty Your Chiltern Invadex UK Limited Overhead Hoist carries a 12 month warranty from the date of purchase subject to the following 1 Should you experience any problems with your product within the first 12 months period please contact your point of purchase 2 Repairs made during the warranty period will be carried out free of charge provided the product has been used strictly in accordance with the guidelines set out in th
5. Overhead Hoists user guide Wispa 100 Plus Wispa Hoist Models 100 Plus Chiltern Invadex UK Ltd 93 42 EEC This user guide contains essential information in relation to safe use and troubleshooting and should be retained with the hoist for reference Chiltern Invadex Overhead Hoist Overhead Hoists Chiltern Invadex UK Ltd User Guide Contents Intended USC cccsecsesscccsscesesessesscesesessesseeess 2 Safety Consideraiong sees eee ee eee eee 2 Using the controls coomconnnirnanconinanonnninananaos 4 Emergency Stop amp Reset Procedure 6 Emergency Lowering sse eee eee eee eee ee eee 6 Charging Wispa Battery Hoists 7 Servicing and maintenance see eee ee eee 8 Plica 8 Troubleshooting omoosmosmonoosisnaconisccricncss 9 Hoist Specification see sese eee eee eee eee 10 AAA TE 11 Wispa Hoist Service Record 12 These products have been designed to the highest standards with safety strength and quality in mind Follow the recommendations in this guide to ensure maximum benefit from your Overhead Hoist Should you experience any difficulties please consult the trouble shooting guide prior to contacting your Overhead Hoist supplier Your Chiltern Invadex Hoist has been designed and tested to meet the highest standards of safety Read the safety section of this guide prior to use This is contained on page 2 Chilter
6. adex Overhead Hoist Emergency Stop To operate in case of an emergency pull the red cord to switch off the hoist completely Reset Procedure Once the emergency stop has been activated the hoist will need to be reset To reset the emergency switch slide the plastic tube on the red cord upwards through the hole in the case and push to reset the switch The hoist should now operate normally Emergency stop pull cord Emergency Lowering In the unlikely event of a power failure or hoist malfunction the hoist occupant may be lowered using the emergency lowering cord To operate pull the white cord gently until 2 clicks are heard felt The occupant will then be slowly lowered In certain circumstances the cord may need to be pulled more gently for just one click to lower the occupant If this occurs refer to the troubleshooting guide on page 9 Do not try and lift using the emergency lowering device as this can damage the hoist Emergency lowering pull cord DA Please Note The emergency lowering device uses a small battery to allow the occupant of the hoist to be lowered in the event of an emergency Frequent testing of this device in non emergency situations will quickly discharge the battery The battery should be renewed at each service and after use User Guide Charging Wispa Battery Hoists When not in use it is VERY important to return Wispa Battery hoists to the end of the t
7. e controlled by the tor y buttons Four Button Hand Control used on Wispalong Hoist Models The four button handset is used to control the raising and lowering of the carry bar and the powered traversing along the ceiling track on Wispalong models The traversing function is controlled by the or gt buttons on the handset The buttons are colour coded with blue and yellow These colours correspond to the blue and yellow direction travel arrows on the underside of the hoist case To control the direction of the hoist view the coloured direction arrows mounted on the hoist and press the button on the hand control which corresponds in colour to the arrow on the hoist The hoist must be moved away from the charging point at the end of the track before the lifting and lowering functions will operate Six Button Hand Control used on X Y Models The 6 button hand control has the same function buttons as the four button hand control with the addition of the tracking for the X Y system The tracking X Y function is controlled by the bottom buttons on the handset The buttons are colour coded with red and green These colours correspond to the red and green direction travel arrows on the underside of the track ends To control the direction of the hoist view the coloured direction arrows mounted on the hoist and track ends and press the button on the hand control which corresponds in colour and direction to the arrows Chiltern Inv
8. er Ensure that the power is switched on at the mains All models symptom suggested cause solution Hoist will not Overloaded Press reset button on side of hoist function at all case If hoist does not reset call out required Emergency stop activated Reset see page 6 Hoist stops whilst Tape is twisted Ensure that tape is vertical lifting Hoist lifts when down Airline connected The black line indicated on the button is pressed incorrectly handsets airline must align with the raised edges on the hoist connection when inserted into the grommet on the hoist box Lifting tape may be To correct this press the up button reversed on the spool to lower carry bar whilst pulling down gently the lift tape to the end of its travel Tape will then rewind itself correctly or the lower cutout will operate If the lower cutout operates the tape is wound correctly Further assistance Please telephone Chiltern Invadex on 01869 365500 further assistance Remember that service calls made after the guarantee period will be chargeable If the maintenance of the equipment is the responsibility of a third party for example the Social Services please contact them in the first instance Chiltern Invadex Overhead Hoist Hoist Specification Lifting capacity WP WBP WLP WLBP models 130 Kg 20 stone WTP WLTP WTBP WLTBP models 190 Kg 30 stone Case construction Injection moulded Flame Retardant ABS Lifting Range Approximately 2000mm
9. iced By COMPANY OO a aa 1 q NaDoOn address A EE Sm DRA A TS CORRE ARPT Pee FRPP CEPERCE RE o post code Engineers Name please print Signature ST Load Tested TO conconccnccnnaccnnnn KOS GHG TS TT User Guide Serviced By company O Eo O O A A A E E Ko e EE T T post code Engineers Name please print Signature Dres Load Tested To cere Kgs Co A ra Serviced By CO A NEO ee IES address A A RENTADO A L Se post code Engineers Name please print Signature Daio asas ato tai Load Tested To Kgs Comments amena rear reco seas ea na da a a a Serviced By company SR seas T address a o ALA card Pan A cee OO RO a Si SS post code Engineers Name please print Signature Date ranas Load Tested To n a e Kgs L slnl Chiltern Invadex Overhead Hoist Dealers Name Rostcoder as E a ae Telephone User Guide Chiltern Invadex Overhead Hoist Overhead Hoists FM553189 BS EN ISO 9001 2008 E hiltern Invadex UK Ltd Chiltern Invadex UK Limited 126 Churchill Road Bicester Oxfordshire OX26 4XD Tel 01869 365500 Fax 01869 365588 Overseas Enquiries Tel 44 0 1869 365500 Fax 44 0 1869 365588 Web www chilterninvadex co uk E mail sales chilterninvadex co uk The crossed wheelie bin symbol shown on this product indicates that the item must not be disposed of with general hou
10. is user guide 3 Our warranty does not cover replacements adjustments or repairs which may be required as a result of normal wear and tear wilful or accidental damage misuse neglect or any other cause which is beyond the control of Chiltern Invadex UK Limited 4 Modifications and repairs made to this product by unauthorised persons will render the warranty void 5 Only parts manufactured or approved by Chiltern Invadex UK Limited shall be used to repair this product Use of unauthorised parts will invalidate all warranties and remove all liability from Chiltern Invadex UK Limited for the safety of this product 6 Chiltern Invadex UK Limited shall in no event be liable for any damages costs or expenses arising from any claim made under this warranty save for any legal liability of Chiltern Invadex UK Limited for death or personal injury resulting from the company s negligence in respect of its products 7 This warranty does not affect your statutory consumer rights Chiltern Invadex Overhead Hoist Wispa Hoist Service Record Serviced By CM re Toa AAA ET TTT e aa a SAO post code Engineers Name please print Signature Dale scene nana Load Tested To s esses Kgs Co na ga e ao DR en tant a eee Serviced By CO A a Address AAA AA AI E F T SR post code Engineers Name please print Signature Dale veer ects Load Tested TO cnnconccnncnnacecnns Kgs
11. lowing statement Clause 7 6 When a hoist is to be used by a disabled person living on their own then some form of communication device shall be installed in the area of use of the hoist so that in the event of an emergency the disabled person is able to summon assistance NOTE This may for example be the fitting of an alarm system or the supply of a conveniently placed telephone etc It is ultimately the responsibility of the user and healthcare professionals to make the necessary assessment of risk where independent use of the system is required Chiltern Invadex Overhead Hoist Using the controls Slack Tape Emergency Device Overload Reset Button or Fuse Colour coded directional arrows match handset button Product Identification Label serial number model SWL Handset Cable Retaining Socket Emergency Stop Lifting Tape SA 5S Ss Emergency Lower ff Carry Bar Soft Touch Handset colour coded direction indication User Guide Hand controls The controls use air to operate the hoist and are therefore completely safe to use with wet hands Two Button Four Button Six Button Hand Control Hand Control Hand Control Please Note The handset is the correct way round when the buttons are at the top Two Button Hand control used on Wispa Hoist Models The two button hand control is used to control the lifting and lowering of the carry bar on Wispa hoist models The lifting and lowering ar
12. n Invadex Overhead Hoist Intended Use of the Product The Wispa hoist has been designed to lift and transfer a disabled person with the help of a carer lt should be used with a Wispa sling or other lifting accessories from the Chiltern Invadex range as assessed by a trained person DA Note Not all slings and accessories are compatible with this hoist If you are unsure please contact Chiltern Invadex UK Limited The correct and appropriate use of this product will reduce the risks associated with manual patient handling The lifting transferring task should be assessed and planned by a trained person A Safety Considerations Safety e Ensure that all users read this guide before operating the hoist e Do not operate the Overhead Hoist without training in the safe operation of the hoist and slings e Only use slings which have been assessed as suitable by a trained person e Read the relevant Sling User Guide which is provided with each sling It explains in detail how to use slings correctly e Do not use the hoist if there is any doubt about wear to the carry bar or there is fraying or stitchdamage to the lifting tape or slings or if the hoistitself is damaged in any way e Before using the hoist for the first time ensure the batteries are fully charged Battery models only e Do not exceed the Maximum load of the hoist W WB WL WLB models 130kgs 20 stone WT WLT WTB WLTB models 190kgs 30 stone When using
13. rack where the charging unit for the batteries is housed To engage the hoist with the charger simply push or traverse the hoist to the end of the track Correct engagement is signalled when the charging light glows green Once the hoist is engaged charging is automatic No further actions are required to charge the batteries The batteries cannot be overcharged When the Hoist is on charge the lifting and lowering functions will not operate Battery Low Indicator Light Wispa Battery Hoists Only The battery low indicator light will glow red when the hoist s batteries are in need of charging This is unlikely to happen unless the hoist is used for long periods of time approximately 60 lifts without charging or the hoist has not been properly parked in its charger to recharge the batteries Battery Low Warning Buzzer Wispa Battery Hoists Only If the battery low warning buzzer sounds then the batteries need recharg ing before use Overload Reset Button This device safeguards the hoist against overload Should the hoist not respond to the handset controls and the battery warning light is not illuminated Wispa Battery models press the overload button to reset If the hoist fails to respond contact Chiltern Invadex or your supplier Chiltern Invadex Overhead Hoist Servicing and maintenance European standard EN10535 requires that hoists shall be serviced every 12 months LOLER regulations require an additional Inspection
14. sehold waste Proper Us recovery of your waste electronic and electrical equipment will ensure safety of human health and the environment Mza For more information where the product can be safely disposed of please contact your Local Authority the dealer from where the product was purchased or Chiltern Invadex UK Limited To request a copy of this guide in large print please contact customer services on 01869 365500 opt 1 or email sales chilterninvadex co uk Approved code Copyright Chiltern Invadex UK Ltd The design of the product shown in this guide is vested in Chiltern Invadex UK Ltd and should not be copied or reproduced in anyway whatsoever without the express permission in writing of Chiltern Invadex Ltd Published by Chiltern Invadex UK Ltd 126 Churchill Road Bicester Oxon OX26 4XD Registered in England No 04704248 CINV 573 01 October 2010

100 Plus User Guide

Contents

Download Pdf Manuals

Related Search

Related Contents