Safety RCD Fused Spur Operating Instructions
Contents
1. The PowerBreaker Single Gang RCD Fused Spur Unit has been designed for storage and use between 5 C and 40 C and at an altitude of no greater than 2000m above sea level Care must be taken not to subject the unit to misuse such as abnor mal pollution by smoke chemi cal or flammable fumes salt laden spray prolonged periods of high humidity or other abnormal conditions Black or Blue Red or Brown INSTALLATION Install RCD spur and connect wires as shown in diagram To fit cable to load equipment Safety RCD Fused Spur Operating Instructions remove blanking plug in lower plate Load cable can now be passed through hole and wired according to diagram Any bare earth conductors must be sleeved with green yellow Sleeving PLEASE CARRY OUT THIS SIMPLE TEST PROCEDURE AFTER INSTALLATION 1 Press ON button 2 Window indicator will turn red 3 Press TEST button 4 Red window indicator will dis appear This means that the RCD has tripped successfully 5 To reset press ON button and use as normal spur Fit BS1362 fuse in accordanc with equipment manufacturers specification Remove this RCD from circuit before performing any high voltage insulation tests f indicator fails to work test fuse if unit still fails to work do not use and return to place of purchase IMPORTANT FOR YOUR PROTECTION Electricity can be dangerous and the use of an RCD should not be regarded as a2. substitute for basic electrical safety precautions Always switch off from supply when working on equipment This device will protect against live and neutral leakage faults to earth it will not protect against electric shock due to contact with both conductors short circuits between live and neutral or a fault in the wiring supplying this device Should your Power Breaker Safety RCD Fused Spur Unit repeatedly trip with an appliance connected or fail to trip when tested in accordance with the instructions return to place of purchase Please keep these instructions safe for future reference
Download Pdf Manuals
Related Search