OPERATING INSTRUCTIONS
Contents
1. Model No RWLT36 Part No 4003010 OPERATING INSTRUCTIONS CE X wu DECLARATION OF CONFORMITY CE R Bee Clarke INTERNATIONAL Hermnall Street Epping Essex CM16 ALG DECLARATION OF CONFORMITY This is an important document and should be retained We hereby declare that this product s complies with the following directive s 2004 108 EC Electromagnetic Compatibility Directive 2006 95EC Low Voltage Equipment Directive 200295 EC Restriction of Hazardous substances The following standards have been applied to the product s EN 67558 2 6 2009 EN 61558 1 2005 4 1 2009 EN 55015 2006 A1 12007 A2 2009 EN 61547 2009 EN 67000 3 2 2006 4 71 2009 EN 67000 3 3 2008 EN 62471 2008 The technical documentation required to demonstrate that the product s meetis the requirementis of the aforementioned directive s has been compiled and is available for inspection by the relevant enforcement authonhes The CE mark was first applied in 2010 Product Description 36 LED Rechargeable Work light amp Torch Model number s RWLT36 Serial batch Number N A Date of Issue 11 01 2012 f Fi ag EE F j WNA AT 4 3 J io A i 1 Signed A i wu ba i I A UN J A Clarke Director RWLT 3 DOCS fred 2 Page l of sante ______ Parts amp Service 020 8988 7400 E mail Parts clarkeinternational com or Service clarkeinternational com INTRODUCTION Thank you for purchasing this CLARKE product Before using f2. he worklight amp torch be sure fo read these instructions thoroughly In doing so you will ensure the safety of yourself and of others around you and you can look forward to the product giving you long and satisfactory service GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase Please keep your receipt as proof of purchase This guarantee is invalid if the product is found to have been abused or tampered with in any way or not used for its intended purpose Faulty goods should be returned to their place of purchase no product can be returned to us without prior permission This guarantee does not effect your statutory rights CONTENTS 1 x Extendable Torch with Worklight amp Torch modes 1 x AC Mains Adaptor Charger Assembly 1 x 12 Volt DC Charging Adaptor Car lighter plug type IN USE TORCH MODE Press the on off button to switch on the Torch mode using 6 LEDs e Up to 12 hours of light can be obtained in Torch mode WORKLIGHT MODE Extend the body of the torch to illuminate the 30 LED Worklight array e Up to 3 hours of light can be obtained in Worklight mode Allow approximately 1 hour to re charge the batteries after use Use the magnetic base to position the worklight during use Never shine the light directly into anyones eyes including animals BATTERY CHARGING AND CARE 1 Always use only the charging adaptors
3. nd of the DC charger to the vehicle cigarette lighter socket and charge for approximately one hour CLEANING To keep your worklight clean wipe with a damp cloth only DO NOT use detergents chemicals or harmful abrasives Never immerse in water ENVIRONMENTAL PROTECTION Do not dispose of this product with general household waste All tools accessories amp packaging should be taken to a recycling centre amp disposed of according to the laws governing Waste Electrical amp Electronic Equipment A SELECTION FROM THE VAST RANGE OF LA R QUALITY PRODUCTS AIR COMPRESSORS POWER WASHERS WATER PUMPS From DIY to industrial Plus air tools Hot and cold electric and engine Submersible electric and engine driven spray guns and accesories driven we have what you need for DIY agriculture and industry GENERATORS WELDERS POWER TOOLS Prime duty or emergency standby Mig Arc Tig and Spot Angle grinders cordless drill sets for business home and leisure From DIY to auto industrial saws and sanders WOODWORKING METALWORKING STARTERS CHARGERS Saws sanders lathes mortisers Drills grinders and saws for DIY All sizes for car and commercial use and dust extraction and professional use Parts amp Service 020 8988 7400 E mail Parts clarkeinternational com or Service clarkeinternational com
4. supplied The mains charger is for indoor use only The worklight should only be re charged when in its closed mode and with the torch switched off Never turn the light on while charging as this may damage the unit 2 When charging a low battery using the adaptor charger the LED beside the charging jack will initially illuminate Red before changing to Green when charging is completed Do not charge for more than 8 hours a s flarke Parts amp Service 020 8988 7400 E mail Parts clarkeinternational com or Service clarkeinternational com 3 The battery must be re charged at least every three months Failure to do so will lead to reduced performance of the worklight and to premature battery failure Note that the batteries cannot be replaced If you plan to store the worklight e g for emergencies we recommend that the battery is fully charged before doing so this will ensure the longest possible battery life Never abuse the charger cable or yank the cable to disconnect it Keep the cable away from sharp edges hot surfaces AC CHARGING 1 Plug the AC charging adaptor into the charging jack near the base of the worklight 2 Connect the other end of the AC charger to the mains power supply and charge for at approximately 1 hour e The worklight must NOT be operated when using the AC charger DC CHARGING 1 Plug the DC charging adaptor into the charging jack near the base of the worklight Connect the other e
Download Pdf Manuals
Related Search