KEY FOB TRANSMITTER OPERATING INSTRUCTIONS
Contents
1. Standards MPT1340 Frequency 433 9 MHz Transmission Range up to 200m line of sight IP Rating IP54 90mm The standard product has 4 buttons however only 1 button will be used with the Single Channel Receiver2. Remote Switching System brought to you by Light DE Wireless Wall Switch The Wireless Wall Switch requires no hard wiring is battery powered and operates by transmitting a RF signal to the receiver The Wireless Wall Switch is used in conjunction with the Light Ideas Remote Switching System and carries out the same function as the Remote Switching System s Key Fob but does not replace it amp You can operate as many receivers as you wish the receiver can learn up to 127 transmitters g Use Velcro squares or double sided tape to mount the Wireless Wall Switch in a convenient location Learning the Switch Code Install the receiver box Remove the lid from the receiver box Press SW1 on the receiver the green LED will flash twice Operate each button on the wall switch that is to work with this receiver The Red LED will flash to confirm the signal has been stored for that channel Range Testing Do not fit the wall switch permanently in position until a range test has been successfully completed Transmission Range For best results hold the wall switch vertically with the buttons facing you a o a Battery Replacement For replacement battery use type CR1220 3V Lithium cell or equivalent Make sure the ve of the battery is to the top when replacing Key Fob Specifications Operating Voltage 3 volt CR1220 lithium cell Battery Life approximately 1 year depending on use Temperature Range 10 to 55 C
Download Pdf Manuals
Related Search