Digi-Sense IR Thermometer Operating Instructions - Cole
Contents
1. 999 F 64 to 1400 C Measurement Range 76 to 932 F 60 to 500 C 32 122 F 0 50 C ele a eS 1 of reading or 1 8 F 1 0 C 2 of reading or 3 6 F 2 C whichever is whichever is greater Operating Range Accuracy Tobj 15 35 C Tamb 25 C Full Range Accuracy Tamb 23 3 C greater Resolution 9 9 199 9 C 0 1 F 0 1 C Response Time 90 1sec Distance Spot 11 1 Battery Life Typical 180 hours continuous use Alkaline without Laser and Back Light Dimensions 6 89 x 1 5 x 2 8 175 2 x 39 0 x 71 9 mm Weight 179 grams including batteries AAA 2pcs Note Under the electromagnetic field of 3V m from 200 to 600 MHz the maximum error is 18 F 10 C A EMCIRFI Readings may be affected if the unit is operated within radio frequency electromagnetic field strength of approximately 3 volts per meter but the performance of the instrument will not be permanently affected 625 East Bunker Court Vernon Hills Illinois 60061 1844 U S A Phone 847 549 7600 Fax 847 247 2929 E mail info coleparmer com Web Site Http www coleparmer com Toll Free 800 323 4340 Imported by Cole Parmer Instrument ects Company Digi Sense Made in Taiwan2. Digi Sense IR Thermometer Operating Instructions Model 39644 00 The thermometer is a non contact infrared thermometer There are many mathematical modes for the Infrared function Please remember to keep away from children and don t use it for safety related applications Infrared Lens Laser option Default Screen Emissivity key reas key Simply aim the thermometer at the measure target with Lens and press Meas key to display the surface temperature The Distance Spot is 11 1 Please make sure the target area is within the field of view Thermocouple Socket FUNCTION w Press Emissivity key then press Up key or Down key to set the emissivity then press AL Mode key to confirm it The emissivity can be changed from 0 10 10E to 1 100E Press Mode key for scrolling more display function as follows f Here will show the emissivity data The default emissivity is 0 95 MOV TITA Mit JTF AVG Press Mode key 5 for the Maximum MAX Minimum MIN Different between MAX and MIN DIF and Average AVG modes During the measurement the special modes reading will be displayed beside the mode icon HA Press Up key or Down key key to change the High Alarm HAL or Lo Alarm LAL then AL press Meas key to confirm it For example When the reading 27 C lt LAL 27 1 C the Low icon will LAIL Connect the th
3. ermocouple with Thermocouple socket 40 and put the probe in on the target the thermometer will display the temperature automatically without pressing any button To see the minimum flash and you will hear a beep sound P R fi or maximum data during the probe measurement please hold down the Up key or Down key A After measure high temp the probe may remain HOT for a while The thermometer will automatically shut off if left idle for more than 60sec unless in PRB mode In PRB mode it will shut off if left idle for more than 12 minutes ADD VALUE Press Up key for LOCK mode ON OFF The lock mode is particularly useful for In MAX MIN DIF continuous monitoring of temperatures for up to 60 minutes AVG mode Press Down key for C or F transferred In all modes First land press Up key for backlight function ON OFF 2 hold on the Meas key and press Down key 2 for laser function ON OFF A CAUTION 1 WHEN DEVICE IS IN USE DO NOT LOOK DIRECTLY INTO THE LASER BEAM PERMANENT EYE DAMAGE MAY RESULT 2 USE EXTREME CAUTION WHEN OPERATING THE LASER 3 NEVER POINT THE DEVICE TOWARDS ANYONE S EYES 4 KEEP OUT OF REACH OF ALL CHILDREN STORAGE amp CLEANING The sensor lens is the most delicate part of the thermometer The lens should be kept clean at all times care should be taken when cleaning the lens using only a soft cloth or cotton swab with water o
4. r medical alcohol Allowing the lens to fully dry before using the thermometer Do not submerge any part of the thermometer The thermometer should be stored at room temperature between 20 to 65 C LCD ERROR MESSAGES The thermometer incorporates visual diagnostic messages as follows t HI 1 Hi or Lo is displayed when the temperature being measured is outside of the settings LOW of HAL and LAL _ For all other error messages it is necessary to reset the thermometer To reset it turn L the instrument off remove the battery and wait for a minimum of one minute reinsert b p the battery and turn on If the error message remains please contact the Service Department for further assistance BATTERIES The thermometer incorporates visual low battery indication as follows LLy nu D z UO Es e EK Battery OK measurements Battery Low battery needs to be are possible replaced measurements are still possible Battery Exhausted measurements are not possible Z When the Low Battery icon indicates the battery is low the battery should be replaced immediately with AAA 1 5V batteries Please note It is important to turn the instrument off before replacing the battery otherwise the thermometer may malfunction A Dispose of used battery promptly and keep away from children SPECIFICATION Item Non contact Infrared Scan function Thermocouple Probe Scan function K type not included 83 2 to 1
Download Pdf Manuals
Related Search