Operating Instructions for Colour Photography on CCD3 © Bio
Contents
1. Operating Instructions for Colour Photography on CCD3 Start up Turn on big green rocker on microscope Fit appropriate holder to stage and insert slide upside down into holder select appropriate objective lens View image with binoculars Turn knob on lower LHS of microscope to VIS Press HAL button on bottom RHS of microscope you will probably need to turn the light intensity up with rocker switch on front of scope Set phase wheel on condenser to H Colour filter may tint your image but ignore as it will not be recorded by the camera View capture images with Canon Image software Log into computer Plug in power supply and turn Canon digital camera on camera is mounted upside down so you will need to feel for on off lever next to dial Dialogue box will appear asking what software to open just cancel Set binocular eyepieces so white lines match white dots parfocal Turn knob on lower LHS of microscope to FP Turn up light above 10 3V to get correct colour temperature 3200K Turn wheel on LHS to 50 50 setting put back to 100 after session Double click Remote Capture icon and click on Shooting Modes Adjustment tab o Make new folder on D drive and specify the filename and path o Set ISO shutter speed to about 200 o Set white balance to Tungsten o Set TV setting roughly between 1 80 and 1 250 o Specify quality e g Large Fine 3072 x 2048 or Small Fine 1536 x 1024 o Time lapse is also an option NB No live pre2. view available Capture image adjust TV setting up down if image too dark bright Copy folder containing captured images from D drive to your network drive Finishing the session Delete your folder on D drive Log out of computer Clean lenses with lens tissue if necessary Turn off Canon digital camera Turn off microscope Turn wheel on LHS back to 100 setting Bio Ilmaging SWDSOP 2004
Download Pdf Manuals
Related Search