Operating Instructions Blu
Contents
1. Rw Video AVCHD R RW R DL Music CD Music CD DA MKV Xvid B CD R JPEG MPO CD RW AAC FLAC MP3 Music CD DA WAV WMA MKV MP4 MPEG2 Xvid USB devices JPEG MPO USB up to 2 TB AAC FLAC MP3 WAV WMA BDT260 BDT161 BDT160 See pages 7 and 32 for more information on the types of content that can be played Getting started E Types of discs that cannot be played by this unit Any other disc that is not specifically supported or previously described e DVD RAM e Super Audio CD e Photo CD e DVD Audio e Video CD and Super Video CD e HD DVD E Region management information The unit can play back BD Video DVD Video discs of the following regions codes including ALL BD Video DVD Video Any DVD R RW R DL R RW R DL and CD R RW that are recorded by a recorder need to be finalized by the recorder to play on this unit Please refer to the recorder s instructions Example E BD Video e This unit supports high bit rate audio Dolby Digital Plus Dolby TrueHD DTS HD High Resolution Audio and DTS HD Master Audio adopted in BD Video e If Dolby D Dolby D Dolby TrueHD is set to PCM and DTS Neo 6 is set to Off the maximum possible number of Dolby sound is 2ch PCM gt 24 M 3D BDT260 BDT161 BDT160 3D videos and 3D still pictures can be played back when this unit is connected to2. EARCH gt gt m Le pray L 6 1 SKIP m SLOW SKIP 149 PAUSE gt t j J EXIT 16 17 Z 18 19 RETURN 20 100 O OG O SOON OOAKRW 11 12 13 14 15 16 17 18 19 20 Turn the unit on and off TV operation buttons You can operate the Panasonic TV using this unit s remote control Some buttons may not work depending on the TV 0 TV Turn the TV on and off AV Change input VOL Adjust the volume Select title numbers etc Enter numbers Cancel Change audio gt 16 Basic playback control buttons gt 16 Show the status messages gt 17 Show Top menu gt 16 Show Option menu 22 Coloured buttons red green yellow blue Used for various purposes depending on the display Transmit the remote control signal Open or close the disc tray gt 13 Switch Secondary Video on off Picture in picture gt 22 Switch Secondary Audio on off Show the Home Screen of Network Service gt 19 Exit the Menu screen Show Pop up menu gt 16 Show HOME menu gt 14 A V lt gt Move the highlight for selection OK Confirm the selection LI gt Frame by frame gt 16 Return to previous screen 1 Disc tray gt 13 2 USB port gt 13 3 POWER LED The LED lights up when the unit is turned on and flashes when error occurs gt 31 4 Remote control s
3. To save on electricity this unit is turned off automatically if there is no button operation for about 20 minutes when not playing back such as when paused or displaying the menu displaying still pictures etc Operations during playback The following functions may not work depending on the media and contents Stop Press MSTOP The stopping point is memorized Resume play function Press gt PLAY to restart from this point e The point is cleared if the media is removed On BD Video discs including BD J the resume play function does not work Pause Press I IPAUSE e Press IIPAUSE again or gt PLAY to restart play Search Slow motion Search While playing press SEARCH 4 or SEARCHPP Slow motion While paused press SEARCHPP The speed increases up to 5 steps Music MP3 etc The speed is fixed to a single step e Press P PLAY to revert to normal playback speed Skip While playing or paused press 144 or gt gt Skip to the title chapter or track Frame by frame While paused press P I IP Press and hold to fast forward e Press P PLAY to revert to normal playback speed Changing audio Press AUDIO You can change the audio channel number or soundtrack language etc Show top menu pop up menu Press TOP MENU or POP UP MENU Select the item and press OK 16 Playback Show the status messages While playing press ST
4. BD Live discs you can enjoy bonus contents that use Internet access For this BD Live function connection of a USB device is necessary along with Internet connection 1 Perform network connection and settings 10 11 BDT161 BDT160 BD813 BD81 Use a LAN cable for a network connection 2 Connect a USB device with 1 GB or more free space e The USB device is used as the local storage 3 Insert the disc M Deleting data on the USB device Select USB Management in the HOME menu gt 14 then select BD Video Data Erase and press OK Slideshow Play a slideshow of photos and adjust various settings during the playback 1 Insert the media 2 Select Photos 3 Select an item and press the green button The following items can be set m e The usable functions and the operating method may vary with each disc please refer to the instructions on the disc and or visit their website e BD Live Internet Access may need to be changed for certain discs gt 26 Start the slideshow Start You can display still pictures in Slideshow the selected folder one by one at a constant interval Interval Change the display interval Transition Select the effect when sliding Effect pictures Set whether to repeat the Repedt Bley slideshow ae e Still pictures displayed as cannot be played back with this unit
5. not updated you may not be able to use Network Service function properly gt 12 Network Service Home Screen is subject to change without notice The services through Network Service are operated by their respective service providers and service may be discontinued either temporarily or permanently without notice Therefore Panasonic will make no warranty for the content or the continuity of the services Some features of websites or content of the service may not be available Some content may be inappropriate for viewers Some content may only be available for specific countries and may be presented in specific languages Playback Home Network feature 1 Press HOME BDT260 BDT161 BDT160 2 Select Network Before using the following features be sure to 3 Select Home Network configure the connected equipment on your Home Network 4 Select DLNA Client m The list can be updated by pressing the red Playing back contents on the button on the remote control DLNA server 5 Select the equipment and press OK You can share photos videos and music storedin 6 Select the item to play and press OK the DLNA Certified media server PC with e You may be able to use convenient Windows 7 installed smartphone recorders functions depending on the content by DIGA etc connected to your home network pressing OPTION e About support format of DLNA gt 33 Ta stien Home
6. Remote Device Operation Enable to operate the unit by DMC etc e If On is selected Quick Start will be activated Device Name Entry Set the name of this unit to be displayed on the connected equipment Registration Type BDT260 BDT161 BDT160 Allow connections to all Automatic the equipment accessing this unit Set the permission for Manual individual equipment connections accessing this unit Remote Device List BDT260 BDT161 BDT160 Registering deregistering of the displayed equipment can be performed when Manual in Registration Type is selected gt BD Live Internet Access gt 18 You can restrict Internet access when BD Live functions are used e f Limit is selected Internet access is permitted only for BD Live contents which have content owner certificates Ratings The following items use the same password Don t forget your password E DVD Video Ratings Set a ratings level to limit DVD Video play E BD Video Ratings Set an age limit of BD Video play M Network Service Lock You can restrict the usage of Network Service System E Easy Settings You can execute basic settings E TV Settings Press OK to show the following settings gt TV Aspect Set to match the type of TV connected When connected to a 4 3 aspect TV and playing 16 9 ratio image
7. equipment cannot decode the respective audio format This unit decodes the audio format and transmits to the connected equipment e If you do not make proper settings the audio may be static or noisy gt BD Video Secondary Audio Select whether or not to mix the primary and secondary audio including the button click sound If Off is selected the unit outputs the primary audio only E Downmix Select the downmix system of multi channel to 2 channel sound amp Select Surround encoded when the connected equipment supports the virtual surround function The downmix effect is not available when Digital Audio Output is set to Bitstream The audio will be output in Stereo in the following cases AVCHD playback Playback of secondary audio including the button click sound E DTS Neo 6 2ch 2 1ch audio is expanded to 7ch 7 1ch This function works when the following conditions are met Audio recorded at 96 kHz or lower is output Digital Audio Output is set to PCM when audio other than PCM is output 24 Settings BDT160 3D BDT260 BDT161 E 3D BD Video Playback Select the playback method of 3D compatible video software E 3D Playback Message Set to display or hide the 3D viewing warning screen when playing back the 3D compatible video software E Graphic Display Level 3 gt 23 La
8. make proper settings gt Vv The unit and TV are using different video systems Turn the unit on Press and hold OK the yellow button and the blue button on the remote control at the same time for more than 5 seconds POWER LED starts to flash and OORET is displayed on the screen Press P right repeatedly on the remote control until O5P N is displayed on the screen Press and hold OK for more than 5 seconds The system switches from PAL to NTSC or vice versa PAL discs cannot be correctly viewed on an NTSC TV BDT260 BDT161 BDT160 When 3D BD Video Playback in the Setup menu is set to Automatic images may not be output depending on the connection method After removing the disc from this unit select Set before play in the Setup menu and select 2D Playback in the setup screen displayed when playing 3D discs gt 25 Video is not output in high definition o gt Confirm that HDMI Video Format in the Setup menu is set properly gt 24 3D video is not output BDT260 BDT161 BDT160 gt gt Vv v Connect to a full high definition TV Is there a non 3D compatible amplifier receiver connected between this unit and a TV gt 9 Are the settings on this unit and the TV correct gt 17 Is the amplifier receiver that is connected between this
9. 18 Playback Enjoying Network Service Network Service allows you to access some specific websites supported by Panasonic This unit has no full browser function and some features of websites may not be available Network Service provides a variety of selected Internet services such as the following Online movie rental service e Video browsing service Internet Images are for illustration purposes contents may change without notice Preparation e Network connection gt 10 e Network settings gt 11 1 Press INTERNET 2 Select the item and press OK To exit from Network Service Press HOME 19 na When playing content in the media Network Service cannot be accessed by pressing INTERNET In the following cases settings are possible using the Setup menu items When restricting the use of Network Service gt 26 Network Service Lock When correcting the displayed time gt 25 Time Zone Summer Time When using another device such as a smartphone in combination with the unit by using a certain app on the device gt 26 Remote Device Operation When using a slow Internet connection the video may not be displayed correctly A high speed Internet service with a speed of at least 6 Mbps is recommended Be sure to update the firmware as soon as a firmware update notice is displayed on the screen If the firmware is
10. 3D Settings E Distance Set the amount of depth perception M Graphic Display Level amp 3D position for the Option menu or message screen etc can be adjusted during 3D playback Setup menu Change the unit s settings if necessary The settings remain intact even if you switch the unit to standby Some items are common to the Option menu You can get the same effect with both menus About Multi User Mode Settings of the items with this indication are saved by the respective users registered in the HOME menu gt 15 1 Press HOME 2 Press OK to select Setup 3 Select Player Settings BDT260 BDT161 BDT160 Piura Adjustment D Sowa o ABC Language HDMI Output Network Ratings 52 system AA G el 4 Select an item and change the settings To exit the screen Press HOME Picture E Picture Mode gt left E Picture Adjustment amp gt left 23 Settings E HDMI Output Press OK to show the following settings gt HDMI Video Format The items supported by the connected devices are indicated on the screen as gt When any item without gt is selected the images may be distorted e If Automatic is selected the best suited output resolution to the connected TV is automatically selected e To enjoy high definition video up converted to 1080p you need to connect the unit di
11. Example of file extension JPEG pg jpeg Audio Audio codec Example of file extension MP3 mp3 FLAC flac AAC m4a aac WMA wma Linear PCM Only when the file is transcoded by DLNA server Display languages list Display Language ENG English FRA French DEU German ITA Italian ESP Spanish NLD Dutch SVE Swedish NOR Norwegian DAN Danish POR Portuguese RUS Russian Language Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Albanian 8381 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Aymara 6589 Azerbaijani 6590 Bashkir 6665 Basque 6985 Bengali Bangla 6678 Bhutani 6890 Bihari 6672 Breton 6682 Bulgarian 6671 Burmese 7789 Byelorussian 6669 Cambodian 7577 Catalan 6765 Chinese 9072 Corsican 6779 Croatian 7282 Czech 6783 Danish 6865 Dutch 7876 English 6978 Esperanto 6979 Estonian 6984 Faroese 7079 Fiji 7074 Finnish 7073 French 7082 Frisian 7089 Galician 7176 Georgian 7565 German 6869 Greek 6976 Greenlandic 7576 Guarani 7178 33 Display Language JPN Japanese CHI Chinese KOR Korean MAL Malay VIE Vietnamese THA Thai POL Polish CES Czech SLK Slovak HUN Hungarian FIN Finnish code list Language Code Gujarati 7185 Hausa 7265 Hebrew 7387 Hindi 7273 Hungarian 7285 Icelandic 7383 Indonesian 7378 Interlingua 7365 Irish 7165 Italian 7384 Japanese 7465 Javanese 7487 Kannada 7578 Kashmiri 7583 Kaz
12. Network Press HOME Preparation Perform network connection gt 10 and network settings gt 11 of this unit Add the contents and folder to the libraries of the Windows Media Player or the smartphone etc Playlist of Windows Media Player can play back only the contents that are stored in the libraries e When connected to DIGA register this unit to your DIGA 20 Playback Using the Digital Media Controller You can use a smartphone or tablet as the Digital Media Controller DMC to playback contents from DLNA server on the Renderer this unit Possible applications Renderer Renderer DMC compatible software should be installed Preparation Perform steps I and gt 20 Perform the Remote Device Settings gt 26 e With the default setting the unit name will be displayed in the following BDT161 BDT160 gt DMP BDT160 1 BDT813 gt DMP BD81 e You can register up to 16 devices Press HOME Select Network Select Home Network Select Media Renderer ah WN Operate the DMC compatible devices To exit from Media Renderer screen Press HOME EI For more details refer to the following website and the operating instructions for each of the equipment http panasonic jp support global cs This site is in English only
13. a 2 4 GHz wireless format e If you connect using the Double Speed Mode 40MHz 2 channels use the same frequency band and there is consequently a greater risk of reception interference This can cause the connection speed to drop or become unstable gt IP Address DNS Settings This is for checking the state of the network connection and setting the IP address and DNS related Press OK to show the respective setting gt Proxy Server Settings This is for checking the state of connection with the Proxy server and performing settings Press OK to show the respective setting gt Network Service Settings gt 19 Press OK to show the following settings Time Zone Set the unit s time to match your location Some Network Service contents require the time zone to be set Set time zone if necessary Summer Time Select On when using summer time 25 Settings gt Network Drive Connection BDT260 BDT161 BDT160 It is possible to access the shared folder of equipment not compatible with DLNA such as the Windows XP operating system and play back video still pictures and music on this unit For the setting and operation method of connected equipment refer to the following website http panasonic jp support global cs This site is in English only gt Remote Device Settings gt 19 21 Press OK to show the following settings
14. a 3D compatible TV using a High Speed HDMI Cable E Music CD Operation and sound quality of CDs that do not comply with CD DA specifications copy control CDs etc cannot be guaranteed to work M USB device e This unit does not guarantee connection with all USB devices e This unit does not support USB device charging e FAT12 FAT 16 FAT32 and NTFS file systems are supported e This unit supports USB2 0 High Speed e This unit supports an HDD formatted in FAT32 and NTFS If the HDD is not recognized the power to the HDD may not be supplied Supply power from an external source E BD RE BD R Discs recorded in DR mode using Panasonic Blu ray Disc recorders may not play back the audio etc correctly ae e It may not be possible to play the above media in some cases due to the type of media the condition of the recording the recording method and how the files were created The producers of the disc can control how discs are played so you may not always be able to control play as described in these operating instructions Read the disc s instructions carefully Getting started Control reference guide When other Panasonic devices respond to the remote control of the unit change the remote control code gt 27 to y e E GI CO3 I SECONDARY Ce GJ Go 14 sa INTERNET 4 GD 3 mw UCIs 3
15. starts to flash and OORET is displayed on the screen Press P right repeatedly on the remote control until O8FIN is displayed on the screen Press and hold OK for more than 5 seconds The remote control does not work properly gt Change the batteries in the remote control gt 5 gt The remote control and this unit are using different codes Turn on this unit by using the standby on switch on this unit and check Remote control Q which is displayed on the screen when you press a button on the remote control Press and hold OK and the displayed number O for more than 5 seconds The TV tuner mode is not displayed when the TV is turned on gt This phenomenon may occur depending on the TV setting when Quick Start is set to On Depending on the TV this phenomenon may be prevented by reconnecting the HDMI cable to a different HDMI input terminal or by changing the HDMI auto connection setting v You have forgotten your ratings password You want to cancel the ratings level gt The ratings level returns to the factory defaults Turn the unit on Press and hold OK the yellow button and the blue button on the remote control at the same time for more than 5 seconds POWER LED starts to flash and OORET is displayed on the screen Press P right repeatedly on the remote control until O3 VL is displayed
16. to the USB port gt 13 gt Connect this unit to the network by a wired connection 30 Reference Messages on the screen Cannot play gt You inserted an incompatible disc Cannot play on this unit gt You tried to play a non compatible image gt Re insert the media No disc inserted gt The disc may be upside down Q This operation is not available gt Some operations are unsupported by the unit For example reverse slow motion etc IP address is not set gt The IP Address in IP Address DNS Settings is Set the IP Address Subnet Mask and Gateway Address Select the automatic address acquisition if necessary The wireless access point currently has a low network security setting It is recommended to change to a higher setting gt Seta stronger network security level referring to the wireless router operating instructions POWER LED When the POWER LED is flashing check the message on the TV screen If a message is not displayed on the TV screen determine the type of the error by checking the way the POWER LED is flashing Flashes 6 times gt The remote control and this unit are using different codes Turn on this unit by using the standby on switch on this unit and check Remote control which is displayed on the screen when you press a button on the remote control Press and hold OK and th
17. unit and TV on Depending on the connected TV the video being played back might switch to 2D video due to changes in resolution etc Check the 3D setting on the TV 29 Reference 3D video is not output correctly as 2D BDT260 BDT161 BDT160 gt Select Set before play in the Setup menu and select 2D Playback in the setup screen displayed when playing 3D discs gt 25 3D BD Video Playback Discs that have recorded titles with Side by side 2 screen structure and that can be enjoyed in 3D are played back in accordance with the settings of the TV Network I can t connect to the network gt Confirm the network connection and settings gt 10 11 25 gt There may be interference that prevents the unit from detecting your home network Place the unit and the wireless router closer to each other This unit may be able to detect your network name gt 11 SSID A black band is displayed around the edge of gt Check the operating instructions for each the screen device and connect accordingly The aspect ratio of the screen is abnormal Vv When using wireless LAN connection video from the DLNA Certified media server is not played back or video frames are dropped during playback BDT260 BDT161 BDT160 gt Higher transfer rate router such as 802 11n gt Confirm the TV Aspect is set properly gt 26 gt Adjust the aspect sett
18. video appears video e During search slow motion Operation Menu or frame by frame only the primary video is displayed m Soundtrack Select on off for audio and the Show or change the soundtrack Soundtrack anguage M Audio channel E Zoom Select the audio channel number E Subtitle Change the subtitle settings E Angle Select the number of the angle Videos and pictures are magnified E Top Menu Display Top Menu E Pop up Menu Display Pop up Menu E Menu Display Menu 22 Settings Picture Settings E Picture Mode Select the picture quality mode during play e If you select User you can change settings in Picture Adjustment E Picture Adjustment amp Specific picture quality settings can be changed E Progressive Select the method of conversion for progressive output to suit the type of material being played e If the video is disrupted when Auto is selected select either Video or Film depending on the material to be played back E 24p Movies and other material recorded on DVD Video at 24p are output at 24p e Only when you have selected On in 24p Output gt 24 and play discs recorded at a rate of 60 fields per second e This may not work with the PAL contents E Reset to Default Picture Settings Return picture settings to the factory defaults BDT260 BDT161 BDT160 l
19. 1 BDT160 When connecting to a non 3D compatible amplifier receiver connect this unit to a TV then connect the TV and the amplifier receiver Please note however that the audio can only be up to 5 1ch When using the TV or amplifier receiver that does not have the indication of ARC non ARC compatible on the HDMI terminal the amplifier receiver and TV must also be connected using an optical digital cable in order to enjoy the TV s sound through the amplifier receiver Connections and settings Connecting to the network The following services can be used when this unit is connected to broadband Firmware can be updated gt 12 e You can enjoy BD Live gt 18 e You can enjoy Network Service gt 19 BDT260 BDT161 BDT160 You can access other devices Home Network gt 20 For details about connection method refer to the instructions supplied with the connected equipment Wireless LAN connection BDT260 This unit has built in Wi Fi and can be connected to a wireless router BDT161 BDT160 BD813 BD81 For wireless capability connect the Wireless LAN Adaptor DY WL5 optional Only DY WL5 can be used Read the operating instructions for DY WL5 thoroughly when using it Cy X eng am Wireless router etc Internet DY WL5 e For up to date compati
20. ATUS The status messages give you information about what is currently being played Each time you press STATUS the display information may change or disappear from the screen e Depending on media and contents the display may change or not appear e g BD Video Q mT C1 0 05 14 Play T Title C Chapter PL Playlist Elapsed time in the title Current position Total time e g JPEG BELG 11 12 2007 Size 500 X 375 Manufacturer Equipment Enjoying 3D video and photos BDT260 BDT161 BDT160 Preparation Connect this unit to a 3D compatible TV gt 9 e Perform the necessary preparations for the TV e Play back following the instructions displayed on the screen e 3D Settings gt 23 25 EI Please refrain from viewing 3D images if you do not feel well or are experiencing visual fatigue In the event that you experience dizziness nausea or other discomfort while viewing 3D images discontinue use and rest your eyes 3D video might not output the way it is set in HDMI Video Format and 24p Output gt 24 When playing back 3D photos from Photos screen select from the 3D list Still pictures in 2D are played back in 2D If 2D and 3D indications are not displayed press the red button on the remote control to switch the view of playback contents 17 Playback Enjoying BD Live With
21. BDT160 Displays the Home Screen of Network Service gt 19 Network Service DLNA Client gt 20 Home Network Media Renderer 21 Network Service BD813 BD81 Displays the Home Screen of Network Service gt 19 Setup Player Settings gt 23 USB Management 18 Changes the background Wallpaper of HOME menu Play back the contents gt 16 e When multiple contents are recorded select the types of contents or the USB title Disc To show the HOME menu Press HOME ae Items to be displayed may vary with the media Where necessary set Mixed Data Disc Option when using a disc with both data files MP3 JPEG MKV etc and Video BDAV and AVCHD gt 27 14 Playback Multi User Mode Multi User Mode allows individuals to customize settings and switch to their saved settings easily Up to four people can use the unit with their own settings The following settings can be personalized e The user icon The wallpaper of HOME menu The specific settings gt 22 23 o 4 Bluray Disa Payer D Bl go Setup Pa Setup J 9 Buser Mrs OB B Ind user e Network The user name and icon currently selected Personalize a new user and switch between users with coloured buttons Personal
22. Panasonic Operating Instructions Blu ray Disc Player Model No DMP BDT260 DMP BDT161 DMP BDT160 DMP BD813 DMP BD81 Unless otherwise indicated illustrations in these operating instructions are of DMP BDT260 Firmware updates Panasonic is constantly improving the unit s firmware to ensure that our customers are enjoying the latest technology Panasonic recommends updating your firmware as soon as you are notified For details refer to Firmware updates gt 12 or http panasonic jp support global cs This site is in English only Thank you for purchasing this product Please read these instructions carefully before using this product and save this manual for future use EG SQT0113 Precautions WARNING Unit To reduce the risk of fire electric shock or product damage e Do not expose this unit to rain moisture dripping or splashing e Do not place objects filled with liquids such as vases on this unit e Use only the recommended accessories Do not remove covers e Do not repair this unit by yourself Refer servicing to qualified service personnel e Do not let metal objects fall inside this unit e Do not place heavy items on this unit AC mains lead To reduce the risk of fire electric shock or product damage e Ensure that the power supply voltage corresponds to the voltage printed on this unit Insert the mains plug fully into the socket outlet Do not p
23. The sides are p cut off so the picture fills 4 3 Pan amp Scan the screen When playing BD Video video is output as 4 3 Letterbox Black bands appear at the top and bottom of the picture 4 3 Letterbox When connected to a 16 9 widescreen TV and playing 4 3 ratio image Video is displayed as a 4 3 16 9 ratio image in the centre of the screen Video is displayed as a 16 9 full horizontally stretched 16 9 image 26 Settings gt TV System Perform the setup so it matches the TV System of the connected TV gt Screen Saver Function This is to prevent image retention on the screen e When this is set to On If a list of playback content is displayed and there is no operation for 10 minutes or more the screen switches to HOME menu automatically e While playing and pausing etc this function is not available gt On Screen Messages Choose whether to show status messages automatically gt HDMI CEC Set to use HDMI CEC function when connected to a device that supports HDMI CEC e Select Off when you do not want to use HDMI CEC E Unit Settings Press OK to show the following settings gt Mixed Data Disc Option Select the playback contents on discs with both data files and Video e If MP3 JPEG MKV is selected data file can be played back e If BDAV AVCHD is s
24. This product contains technology subject to certain intellectual property rights of Microsoft Use or distribution of this technology outside of this product is prohibited without the appropriate icense s from Microsoft 3 MS PlayReady End User Notices Content owners use Microsoft PlayReady content access echnology to protect their intellectual property including copyrighted content This device uses PlayReady technology to access PlayReady protected content and or WMDRM protected content If the device fails to properly enforce restrictions on content usage content owners may require Microsoft to revoke he device s ability to consume PlayReady protected content Revocation should not affect unprotected content or content protected by other content access technologies Content owners may require you to upgrade PlayReady to access their content If you decline an upgrade you will not be able to access content that requires the upgrade 4 FLAC WPA Supplicant The software licenses are displayed when Software Licence in he Setup menu is selected gt 27 6 Gri Java ee SETUP dd CERTIFIED S dts u1p Master Audio 35 NORSK ADVARSEL Produkt For redusere faren for brann elektrisk st t eller skade p apparatet e Utsett ikke produktet for regn fukt drypping eller sprut Ikke plasser objekter som er fylt med v ske som vaser pa apparatet Bruk kun anbefalt tilb
25. akh 7575 Kirghiz 7589 Korean 7579 Kurdish 7585 Laotian 7679 Latin 7665 Latvian Lettish 7686 Lingala 7678 Lithuanian 7684 Macedonian 7775 Malagasy md Malay 7783 Malayalam 7776 Maltese 7784 Maori 7773 Marathi 7782 Moldavian 7779 Mongolian 7778 Nauru 7865 Nepali 7869 Norwegian 7879 Oriya 7982 Pashto Pushto 8083 Persian 7065 Polish 8076 Portuguese 8084 Punjabi 8065 Quechua 8185 Display Language ARA Arabic HIN Hindi PER Persian IND Indonesian MRI Maori BUL Bulgarian RUM Romanian GRE Greek TUR Turkish Others Language Code Rhaeto Romance 8277 Romanian 8279 Russian 8285 Samoan 8377 Sanskrit 8365 Scots Gaelic 7168 Serbian 8382 Serbo Croatian 8372 Shona 8378 Sindhi 8368 Singhalese 8373 Slovak 8375 Slovenian 8376 Somali 8379 Spanish 6983 Sundanese 8385 Swahili 8387 Swedish 8386 Tagalog 8476 Tajik 8471 Tamil 8465 Tatar 8484 Telugu 8469 Thai 8472 Tibetan 6679 Tigrinya 8473 Tonga 8479 Turkish 8482 Turkmen 8475 Twi 8487 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volap k 8679 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 7473 Yoruba 8979 Zulu 9085 Reference AVCHD is a trademark of Panasonic Corporation and Sony Corporation Java is a registered trademark of Oracle and or its affiliates Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Labora
26. appear in associated documentation and c there is clear notice in each modified Data File or in the Software as well as in the documentation associated with the Data File s or Software that the data or software has been modified 34 Reference THE DATA FILES AND SOFTWARE ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE DATA OR PROFITS WHETHER IN AN ACTION OF CONTRACT NEGLIGENCE OR OTHER TORTIOUS ACTION ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE DATA FILES OR SOFTWARE Except as contained in this notice the name of a copyright holder shall not be used in advertising or otherwise to promote the sale use or other dealings in these Data Files or Software without prior written authorization of the copyright holder 1 MS WMA This product is protected by certain intellectual property rights of Microsoft Corporation and third parties Use or distribution of such echnology outside of this product is prohibited without a license rom Microsoft or an authorized Microsoft subsidiary and third parties 2 MS PlayReady Final Product Labeling
27. bility information on your wireless router refer to http panasonic jp support global cs This site is in English only e The unit is not compatible with public wireless LAN services provided in airports stations cafes etc e See page 3 for the precautions for wireless LAN connection LAN cable connection LAN Cable TOBASETIODBASETA gt Broadband router etc Je ga y e Use category 5 or above straight LAN cables STP when connecting to peripheral devices Inserting any cable other than a LAN cable in the LAN port can damage the unit P Internet 10 Connections and settings Settings The following settings can be performed anytime in the Setup menu 25 26 Easy Settings After connecting your new player for the first time and pressing the basic settings screen will appear Preparation Turn on the TV and select the appropriate video input 1 Press 6 Setup screen appears 2 Follow the on screen instructions to continue with the settings Easy Network Setting After completing Easy Settings you can perform Easy Network Setting Select Wired or Wireless and press OK Select a connection mode Wired Wireless e O RETURN Follow the on screen instructions to establish your connection settings BDT161 BDT160 BD813 BD81 If Wireless LAN Adaptor is not connected i
28. complies with the requirement set by the Directive for the chemical involved Table of contents Precautions Getting started Hs Accessories 5 Unit and media care 5 Playable media 6 Control reference guide 8 Connections and settings SS Connecting toa TV 9 Connecting to an amplifier receiver 9 Connecting to the network 10 SEUNGS ek 11 Playback ae Inserting or removing media 13 HOME menu 14 Multi User Mode 15 Playback icc cesna eaa Svak 16 Enjoying Network Service 19 Home Network feature 20 HDMI CEC oonan te a a 21 Settings SSS SST Option menu 22 Setup menu 23 Reference gt gt gt Troubleshooting guide 28 Specifications 32 Getting started Accessories Check the supplied accessories before using this unit 1 Remote control N2QAYB000956 Batteries for remote control 1 AC mains lead 1 CD ROM e Product numbers are provided in these operating instructions correct as of January 2014 These may be subject to change e Do not use AC mains lead with other equipment E Using the remote control Insert the batteries to the terminal so that it and matches those in the remote control R6 LR6 AA Alkaline or manganese batteries Point it at the remote control signal sensor on this unit gt 8 Un
29. d the condition of the unit About Multi User Mode BJ Settings of the items with this indication are saved by the respective users registered in the HOME menu 15 1 Press OPTION e When playing music select Playback Settings and press OK e g BD Video BDT260 BDT161 BDT160 Ea Soundtrack ro Angle ra Repeat Play Status 1 ENG Dolby TrueHD 3 Primary Video 1MPEG 4 AVC Secondary Video Zoom Top Menu Pop up Menu E Repeat Play Select the item that you want to repeat You can repeat the playback of a chapter playlist the entire disc etc but the items displayed will differ depending on the type of the media e Select Off to cancel E Random Select whether or not to play random E Start Slideshow Start the slideshow E Status Show the status messages E Rotate RIGHT E Rotate LEFT Rotate the still picture E Wallpaper Set the still picture to the wallpaper of HOME menu gt 14 E Icon Registration Set the still picture as your user icon 15 E Video The recording method of original video appears 2 Select an item and change the settings To exit the screen Press OPTION E Primary Video The recording method of original primary video appears E Secondary Video Regarding Language amp 33 Select on off for images The recording method of original
30. e DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living Network Alliance Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries Copyright 2004 2010 Verance Corporation Cinavia is a Verance Corporation trademark Protected by U S Patent 7 369 677 and worldwide patents issued and pending under license from Verance Corporation All rights reserved This product incorporates the following software 1 the software developed independently by or for Panasonic Corporation 2 the software owned by third party and licensed to Panasonic Corporation 3 the software licensed under the GNU General Public License Version 2 0 GPL V2 0 4 the software licensed under the GNU LESSER General Public License Version 2 1 LGPL V2 1 and or 5 open source software other than the software licensed under the GPL V2 0 and or LGPL V2 1 The software categorized as 3 5 are distributed in the hope hat it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE Please refer to the detailed erms and conditions thereof shown in the Player Settings menu At least three 3 years from delivery of this product Panasonic will give to any third party who contacts us at the contact information provided below for a charge no more than ou
31. e Depending on the contents and the connected equipment playback may not be possible Items displayed in grey on the display cannot be played back by this unit HDMI CEC This unit supports HDMI CEC Consumer Electronics Control function See the operating instructions for connected equipment for operational details Preparation Set HDMI CEC to On gt 27 The default setting is On Set the HDMI CEC operations on the connected equipment e g TV Turn on all HDMI CEC compatible equipment and select this unit s input channel on the connected TV so that the HDMI CEC function works properly Repeat this procedure when the connections or settings are changed Automatic input switching Power on link When the unit starts playback the TV will automatically switch the input channel and the screen of the unit will be displayed Additionally when the TV is off the TV will automatically turn on Power off link All connected equipment compatible with HDMI CEC including this unit automatically turns off when you switch the TV off aa This unit supports the HDMI CEC Consumer Electronics Control function However operation cannot be guaranteed on all HDMI CEC devices 21 Settings Option menu A variety of playback operations and settings can be performed from this menu Available options differ depending on the playing contents an
32. e displayed number O for more than 5 seconds Flashes gt The copyright protected disc cannot be played back One of the devices connected to this unit TV amplifier etc does not support copyright protection Flashes 3 times gt The disc in use cannot be played back since the copyright information is invalid 31 Reference Specifications Fite format l General File format Extension Reference MKV mkv The video file and Subtitles text file subtitles text file are F MKV fie i aai inside the same folder Sie GE RAUNISE KAN FE and the file names are Operating 5 C to 35 C ASS ass AC Same excep forthe temperature range AVI avi Some MKV Xvid files Operating humidity 10 to 80 RH no condensation may not be played range Xvid Subtitles text file i Ba ai 7 z vi SRT srt lepending on the video HDMI AV output Output connector Type A 19 pin SUB sub resolution frame rate 1 system TXT txt condition subtitle USB slot USB2 0 format and so on 1 system mp4 MP4 mov Some mp4 MPEG files Ethernet 10BASE T 100BASE TX 1 system H 264 AAC iv may not be played back 7 correctly depending on BDT260 Standard Compliance a P f Wireless LAN IEEE802 11 b g
33. eh r e Fjern ikke deksler Reparer ikke denne enheten selv overlat service til kvalifisert servicepersonell Vekselstr mnett Nettst pselet er trukket ut fra denne enheten Installer denne enheten slik at nettst pselet umiddelbart kan trekkes fra stikkontakten CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM FDA 21CFRICLASS I Ta DO NOT STARE INTO THE BEAM IEC60825 1 CLASS 2 ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE CLASSE 2 EN CAS D OUVERTURE NE PAS REGARDER DANS LE FAISCEAU FORSIGTIG SYNLIG OG USYNLIG LASERSTRALING KLASSE 2 NAR LAGET ER BENT UNDGA AT SE LIGE IND I STR LEN VARO AVATTAESSA OLET ALTTIINA LUOKAN 2 NAKYVAA JA NAKYMATONTA LASERS TEILY ALA TUNOTA SATEESEEN VARNING KLASS 2 SYNLIG OCH OSYNLIG LASERSTRALNING NAR DENNA DEL R PPNAD STIRRA EJ IN I STR LEN VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG KLASSE 2 WENN ABDECKUNG GE FFNET NICHT IN DEN STRAHL BLICKEN TA TAMARA AST SER ARS HR CCEMXK EDS AIOTRRORTRL TRAILS E hENEEBEBUTE VQL2P54 Manufactured by Panasonic Corporation Kadoma Osaka Japan Importer for Europe Inside of product CAUTION CLASS 2 VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN Produ ktets in nside FORSIKTIG Produkt e Dette produktet anvender en laser Betjening av kontroller eller justering eller andre inngrep enn de beskrevet i denne bruksanvisning kan f
34. elected BDAV and AVCHD can be played back gt Edit User Information Change the user information registered in the HOME menu E Start up Banner Select whether to display the banner after turning on this unit gt 14 E Quick Start Speed of start up from standby mode is increased e When set to On the internal control unit will be powered and the idle power consumption will increase so compared to when set to Off Power consumption gt 32 E Remote Control Change the remote control code if other Panasonic products react to this remote control E Firmware Update gt 12 Press OK to show the following settings gt Automatic Update Check When this equipment remains connected to the Internet it will check for the latest firmware version when it is turned on and you can update it if necessary gt Update Now You can update the firmware manually if a firmware update is available E System Information Press OK to show the following settings gt Software Licence Information about the software used by this unit is displayed gt Firmware Version Information Display firmware version of this unit and wireless LAN module E Default Settings This returns all values in the Setup menu and the Option menu to the default settings except for some settings of network ratings remote control code on screen language etc 27 Reference Troubleshooti
35. ignal sensor Distance Within approx 7 m Angle Approx 20 up and down 30 left and right Open or close the disc tray gt 13 Basic playback control switches gt 16 Standby on switch I gt 11 Press to switch the unit from on to standby mode or vice versa In standby mode the unit is still consuming a small amount of power Rear panel terminals gt 9 10 Connections and settings Connecting to a TV Connect the AC mains lead after making all connections e Before making any connections we recommend that you temporarily disconnect all the units from AC power e Use the High Speed HDMI cables Non HDMI compliant cables cannot be utilized It is recommended that you use Panasonic s HDMI cable When outputting 1080p signal please use HDMI cables 5 0 meters or less HDMI cable Homi HDMI IN qo 1 NE AV OUT gt To a household mains socket AC mains lead supplied e This unit consumes a small amount of AC power gt 32 even when turned off in standby mode For the purpose of energy conservation the unit should be disconnected if you will not be using it for extended period of time Connecting to an amplifier receiver HDMI cable HDMI cable Homi v HDMI IN HON UT SD Ons CO HDMLIN AV OUT Ue Bilal E mene Amplifier receiver e Set Digital Audio Output gt 24 BDT260 BDT16
36. ing on the TV Audio 2 4 GHz wireless router may solve the problem If you use 802 11n 2 4 GHz Cannot hear the desired audio type wireless router it is necessary to set the gt Check the connections and the Digital Audio encryption type to AES Output settings gt 9 24 Simultaneous use with a microwave cordless telephone etc at 2 4 GHz may result in connection interruptions or other problems gt On the Wireless Settings screen gt 25 the continuous lighting of at least 4 Reception indicators is the target for a stable connection If 3 or fewer indicators are lit or the Playback Disc cannot be played gt The disc is dirty gt 5 connection is being interrupted change the gt The disc is not finalized gt 7 position or angle of your wireless router and gt Confirm the Mixed Data Disc Option is set see if the connection state improves If there properly gt 27 is no improvement connect to a wired network and perform the Easy Network Still pictures JPEG do not play back Setting 11 again normally gt The images that were edited on the PC such as Progressive JPEG etc may not be played back I can t play back BD Live gt Confirm that this unit is connected to the broadband Internet gt 10 gt Confirm the BD Live Internet Access settings gt 26 gt Confirm a USB device is connected
37. it and media care M Clean this unit with a soft dry cloth e Never use alcohol paint thinner or benzine to clean this unit e Before using chemically treated cloth carefully read the instructions that came with the cloth H This unit s lens Lens cleaner RP CL720AE e This lens cleaner may not be available for sale in all countries e g not available in Germany please consult your Panasonic dealer for advice e This lens cleaner is sold as specific for DIGA but can be used on this unit as well M Clean discs DO NOT Wipe with a damp cloth and then wipe dry with a dry cloth M Disc handling precautions e Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc e Do not attach labels or stickers to discs e Do not use disc cleaning sprays benzine thinner static electricity prevention liquids or any other solvent e Do not use the following discs Discs with exposed adhesive from removed stickers or labels rented discs etc Discs that are badly warped or cracked Irregularly shaped discs such as heart shapes Getting started Playable media Device Media markings Device types Contents format BD Video Video E gt j Video ED gt POTE JPEG MPO Blu ray Disc BD R Video MKV Xvid DVD Video Video VIDEO EYP DVD R R4 7 Video AVCHD MKV Xvid JPEG MPO DVD AAC FLAC MP3 WAV ove R DVD R DL DVD DVD RW
38. izing a new user 1 Press HOME 2 Press the coloured button that indicates new user personalization 3 Select an item and change the settings according to the indications The following items can be set Input Fi Personalize a user name Nickname Personalize a user icon Select from Illustrations The image can be selected from prepared illustrations Create from Photos You can select a photo in recording media as an icon gt 22 Icon Registration Select Icon Personalize a background of the HOME menu e In addition to the default wallpapers you can select a photo in recording media as a wallpaper gt 22 Wallpaper Select Wallpaper 4 Select Confirm and press OK To change the personalized user information Select Edit User Information from Setup menu gt 27 Switching the user information Press the coloured buttons in the HOME menu to switch to the user information corresponding to the button 15 Playback Playback 1 Insert the media Playback starts depending on the media 2 Select the item to play and press OK Repeat this step if necessary m e DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED Press MSTOP when you have finished playback to protect the unit s motor your TV screen and so on It is not possible to play back AVCHD and MPEG2 videos which have been dragged and dropped or copied and pasted to the media
39. minutes It may take longer or may not work properly depending on the connection environment If you do not want to check for the latest firmware version set Automatic Update Check to Off 27 12 Playback Inserting or removing media Notes e When inserting a media item ensure that it is facing the correct way which is the right side facing up e If you connect a Panasonic product with a USB connection cable the setup screen may be displayed on the connected equipment For details refer to the instructions for the connected equipment CAUTION Do not place objects in front of the unit The disc tray may collide with objects when it is opened and this may cause malfunction 13 Playback HOME menu Major functions of this unit can be operated from the HOME menu Preparation Turn on the TV and select the appropriate video input 1 Press 0 to turn on the unit e After network service introduction banner is shown the HOME menu is displayed When connected to the network the banner content may be changed You can disable the Start up Banner gt 27 2 Press OK or A V lt gt to select the item e If there are any other items repeat this step BDT260 BDT161 BDT160 re ETER l ke ee Vester J B stuser Videos Photos Music Network BDT260 BDT161
40. n MPEG mpg mpeg _ the video resolution TS PS m2ts mts ts frame rate condition and Frequency range So on 2 4 GHz band MOTION JPEG and Progressive JPEG are Security WPA WPA2 not supported Encryption Type TKIP AES JPG jpo You may not be able to Authentication Type PSK WEP JPEG neq JPG play back the file if you 64 bit 128 bit Jpeg have edited the folder LASER Specification Class 1 LASER Product Scu PEAN Wave length 785 nm CDs device 660 nm DVDs 405 nm BDs Laser power No hazardous This unit supports ID3 _ radiation is emitted with the safety MP3 MP3 mp3 tags but only titles artist protection names and album names can be displayed Power supply AC 220 V to 240 V 50 Hz 7 7 FLAC FLAC flac Maximum sampling rate Power consumption Approx 14 W 192 kHz 24 bi Power consumption Approx 0 5 W WAV WAV wav Maximum sampling rate in standby mode zi BDT260 BDT161 ard Approx 4 W BDT160 MPO mpo 3D still picture standby mode MPO Dimensions Approx 312 mmx43 mmx 180 mm This unit supports ID3 WxHxD AAC M4A m4a tags AAC aac Maximum sampling rate Mass Approx 1 0 kg 48 kHz 320 kbps Specifications are subject to change without notice This unit supports ID3 WMA wWMA wma a9s Maximum sampling rate 48 kHz 355 kbps e With certain reco
41. neral consumer Category 3 This product on purpose to connect to access point of 2 4 GHz WLAN To dispose or transfer this unit The unit may keep the user settings information in the unit If you discard this unit either by disposal or transfer then follow the procedure to return all the settings to the factory presets to delete the user settings 28 To return all settings to the factory preset The operation history may be recorded in the memory of this unit Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products packaging and or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste For proper treatment recovery and recycling of old mE products and used batteries please take them to applicable collection points in accordance with your national legislation By disposing of them correctly you will help to save valuable resources and prevent any potential negative effects on human health and the environment For more information about collection and recycling please contact your local municipality Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation Note for the battery symbol bottom symbol This symbol might be used in combination with a chemical symbol In this case it
42. ng guide Before requesting service please perform the following checks If the problem remains unresolved consult your dealer for instructions E Unit does not respond to remote control or unit s buttons Disconnect the AC mains lead wait 1 minute then reconnect the AC mains lead Do you have the latest firmware installed Panasonic is constantly improving the unit s firmware to ensure that our customers are enjoying the latest technology gt 12 The following do not indicate a problem with this unit Regular disc rotating sounds Image disturbance during search BDT260 BDT161 BDT160 Image disturbance when replacing 3D discs M Cannot eject disc Turn the unit on Press and hold OK the yellow button and the blue button on the remote control at the same time for more than 5 seconds POWER LED starts to flash and OORET is displayed on the screen Press P right repeatedly on the remote control until O6FTO is displayed on the screen Press OK General operation To return to the factory defaults gt Select Yes in Default Settings in the Setup menu gt 27 To return all settings to the factory preset gt Reset the unit as follows Turn the unit on Press and hold OK the yellow button and the blue button on the remote control at the same time for more than 5 seconds POWER LED
43. nguage E Soundtrack Preference Choose the language for audio e f Original is selected the original language of each disc will be selected e Enter a code gt 33 when you select Other E Subtitle Preference Choose the language for the subtitle e If Automatic is selected and the language selected for Soundtrack Preference is not available subtitles of that language will automatically appear if available on that disc e Enter a code gt 33 when you select Other E Menu Preference Choose the language for the disc menus Enter a code gt 33 when you select Other E Subtitle Text Select a desired item according to the language used for MKV Xvid subtitles text This item is displayed only after playing back a file E On Screen Language Choose the language for menus and on screen messages Network E Easy Network Setting gt 11 E Network Settings Perform network related settings individually Press OK to show the following settings gt LAN Connection Mode Select the LAN connection method gt Wireless Settings This allows the wireless router and connection settings to be set up Current connection settings and connection state can be checked Press OK to show the following settings Connection Setting The wireless router connection wizard will be displayed Double Speed Mode Setting 2 4GHz Set the connection speed for
44. on the screen Press OK 28 Reference The TV screen turns black gt Inthe following cases HDMI authentication takes place and a black screen is displayed When 24p Output is set to On BDT260 BDT161 BDT160 When the display is switched between 2D and 3D images This unit does not recognize the USB connection correctly gt Disconnect and re connect the USB cable If it still does not recognize the connection turn this unit off and on again gt USB devices may not be recognized by this unit when connected using the following a USB hub a USB extension cable other than the supplied with the Wireless LAN Adaptor DY WL5 optional If you connect USB HDD to this unit use the USB cable that is supplied with the HDD v Picture The images from this unit do not appear on the TV Picture is distorted gt An incorrect resolution is selected in HDMI Video Format Reset the setting as follows Turn the unit on Press and hold OK the yellow button and the blue button on the remote control at the same time for more than 5 seconds POWER LED starts to flash Press 8 and the blue button on the remote control at the same time for more than 5 seconds Set the item again gt 24 When Dolby Digital Plus Dolby TrueHD and DTS HD audio are not output properly select Yes in Default Settings gt 27 and
45. ork settings on this unit perform the network settings on your PC Please be aware that connecting to a network without encryption may result in the leaking of data such as personal or secret information SSID An SSID Service Set IDentification is a name used by wireless LAN to identify a particular network Transmission is possible if the SSID matches for both devices 11 Connections and settings Firmware updates Occasionally Panasonic may release updated firmware for this unit that may add or improve the way a feature operates These updates are available free of charge This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection When a new firmware version is available the following message is displayed Ne amp DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place After the firmware is installed FIN will be displayed on the screen Unit will restart and the following screen will be displayed e If downloading on this unit fails or this unit is not connected to the Internet then you can download the latest firmware from the following website and burn it to a CD R to update the firmware http panasonic jp support global cs This site is in English only To show the firmware version on this unit gt 27 Firmware Version Information Downloading will require several
46. r Information Center P O Box 86851 San Diego CA 92138 USA Wireless LAN connection The following limits are in place regarding the usage of this unit or Wireless LAN Adaptor You must be aware of these limits before using these devices Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits or to any condition of use or disuse of these devices Data transmitted and received over radio waves may be intercepted and monitored This unit and Wireless LAN Adaptor contain delicate electronic components Please use these devices in the manner in which they were intended and follow the following points Do not expose these devices to high temperatures or direct sunlight Do not bend or subject these devices to strong impacts Keep these devices away from moisture Do not disassemble or alter these devices in any way BDT260 C 1731 Declaration of Conformity DoC Hereby Panasonic Corporation declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC Customers can download a copy of the original DoC to our R amp TTE products from our DoC server http www doc panasonic de Contact to Authorized Representative Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15 22525 Hamburg Germany This product is intended for ge
47. r cost of physically performing source code distribution a complete machine readable copy of the corresponding source code covered under GPL V2 0 LGPL V2 1 or the other licenses with the obligation to do so as well as the respective copyright notice hereof Contact Information oss cd request gg_ jp panasonic com The source code and the copyright notice are also available for ree in our website below http panasonic net avc oss bdplayer AWBPM14A html David M Gay s dtoa and strtod license The author of this software is David M Gay Copyright c 1991 2000 2001 by Lucent Technologies Permission to use copy modify and distribute this software for any purpose without fee is hereby granted provided that this entire notice is included in all copies of any software which is or includes a copy or modification of this software and in all copies of the supporting documentation for such software THIS SOFTWARE IS BEING PROVIDED AS IS WITHOUT ANY EXPRESS OR IMPLIED WARRANTY IN PARTICULAR NEITHER THE AUTHOR NOR LUCENT MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE UNICODE INC LICENSE AGREEMENT DATA FILES AND SOFTWARE Unicode Data Files include all data files under the directories http www unicode org Public http www unicode org reports and http www unicode org cldr data Unicode Software includes any sou
48. rce code published in the Unicode Standard or under the directories http www unicode org Public http www unicode org reports and http www unicode org cldr data NOTICE TO USER Carefully read the following legal agreement BY DOWNLOADING INSTALLING COPYING OR OTHERWISE USING UNICODE INC S DATA FILES DATA FILES AND OR SOFTWARE SOFTWARE YOU UNEQUIVOCALLY ACCEPT AND AGREE TO BE BOUND BY ALL OF THE TERMS AND CONDITIONS OF THIS AGREEMENT IF YOU DO NOT AGREE DO NOT DOWNLOAD INSTALL COPY DISTRIBUTE OR USE THE DATA FILES OR SOFTWARE COPYRIGHT AND PERMISSION NOTICE Copyright c 1991 2009 Unicode Inc All rights reserved Distributed under the Terms of Use in http www unicode org copyright html Permission is hereby granted free of charge to any person obtaining a copy of the Unicode data files and any associated documentation the Data Files or Unicode software and any associated documentation the Software to deal in the Data Files or Software without restriction including without limitation the rights to use copy modify merge publish distribute and or sell copies of the Data Files or Software and to permit persons to whom the Data Files or Software are furnished to do so provided that a the above copyright notice s and this permission notice appear with all copies of the Data Files or Software b both the above copyright notice s and this permission notice
49. rding states and folder structures the play order may differ or playback may not be possible 32 Reference i Audio information The audio output differs depending on the settings on the unit amp 24 Digital Audio Output e The number of channels listed is the maximum possible number of output channels when connected to amplifier receiver compatible with the respective audio format Digital Audio Output Bitstream PCM BD Video Output Outputs using original 7 1ch PCM channel audio DVD Video 5 1ch PCM 1 When BD Video Secondary Audio is set to On the audio will be output as Dolby Digital DTS Digital Surround or 5 1ch PCM 2 The maximum possible number of Dolby sound is 2ch PCM 3 When DTS Neo 6 is set to Cinema or Music 2ch 2 1ch audio can be expanded to 7ch 7 1ch and output gt 24 Supported format for DLNA BDT260 BDT161 BDT160 e File formats that are not supported by your DLNA server cannot be played Video Container Video codec Audio codec Beng file extension MKV H 264 AAC mkv MPEG 4 race am Advanced PCM p Xvid Simple Profile FLAC sd ASP Vorbis AVCHD H 264 Dolby Digital mts MP4 AAC mp4 mov Dolby Digital PS MPEG2 Linear PCM P9 Mpeg MPEG2 AAC Ts H 264 Dolby Digital 2ts ts Photo Format
50. re til farlig bestr ling e Plasser ikke pen ild slik som levende lys opp apparatet e Dette apparatet er beregnet for bruk under moderate klimaforhold Plassering For redusere faren for brann elektrisk st t eller skade p apparatet e Ikke plasser apparatet i en bokhylle et innebygget kabinett eller et annet lukket sted Pass p at produktet er godt ventilert e Apparatets ventilasjons pninger m ikke dekkes til med aviser duker gardiner eller lignende LASER spesifikasjon Klasse 1 LASER produkt B lgelengde 785 nm CD 660 nm DVD 405 nm BD Laserstyrke Ingen farlig str ling sendes ut CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT EU Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15 22525 Hamburg Germany Panasonic Corporation Web Site http panasonic net Panasonic Corporation 2014 En SQT0113 F0114QK0
51. rectly to 1080p compatible HDTV High Definition TV If this unit is connected to an HDTV through other equipment the other equipment must also be 1080p compatible gt 24p Output When this unit is connected to a TV supporting 1080 24p output movies and other material recorded at 24p are output at 24p e When playing DVD Video set to On and then set 24p in Picture Settings gt 23 to On e When BD Video DVD Video images other than 24p are played images are output at 60p gt Deep Colour Output This setting is for selecting whether to use Deep Colour Output when a TV that supports Deep Colour is connected gt Contents Type Flag Depending on the playback content the TV will output adjusting to the optimal method when a TV that supports this function is connected A progressive image recorded at a rate of 24 frames per second motion picture film Many BD Video movie contents are recorded in 24 frames second in accordance with the film materials Sound E Dynamic Range Compression You can listen at low volumes but still hear dialogue clearly Dolby Digital Dolby Digital Plus and Dolby TrueHD only e Automatic is effective only when playing Dolby TrueHD E Digital Audio Output Press OK to show the following settings gt Dolby D Dolby D Dolby TrueHD gt DTS DTS HD Select the audio signal to output e Select PCM when the connected
52. s displayed check that the Wireless LAN Adaptor is fully inserted Alternatively disconnect and reconnect it E About the wireless connection Before beginning wireless connection setup Obtain your network name SSID e If your wireless connection is encrypted please be sure that you know your encryption key If your SSID is not displayed Search again by pressing the red button on the remote control Stealth SSIDs will not be displayed in this case enter manually by using Manual setting Press HOME gt press OK to select Setup gt select Player Settings gt select Network and press OK gt select Network Settings and press OK gt select Wireless Settings and press OK gt select Connection Setting and press OK gt select Manual setting and press OK If your wireless network is encrypted Encryption Key input screen will be displayed Input the encryption key of your network If your wireless router is supports WPS Wi Fi Protected Setup You can easily set up a connection by pressing the green button on the remote control ae Refer to the operating instructions of the hub or router Do not use this unit to connect to any wireless network for which you do not have usage rights Using these networks may be regarded as illegal access If you have trouble getting online on your PC after performing netw
53. tories For DTS patents see http patents dts com Manufactured under license from DTS Licensing Limited DTS DTS HD the Symbol amp DTS and the Symbol together are registered trademarks and DTS HD Master Audio is a trademark of DTS Inc DTS Inc All Rights Reserved HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries This product is licensed under the AVC patent portfolio license and VC 1 patent portfolio license for the personal and non commercial use of a consumer to i encode video in compliance with the AVC Standard and VC 1 Standard AVC VC 1 Video and or ii decode AVC VC 1 Video that was encoded by a consumer engaged in a personal and non commercial activity and or was obtained from a video provider licensed to provide AVC VC 1 Video No license is granted or shall be implied for any other use Additional information may be obtained from MPEG LA LLC See http www mpegla com MPEG Layer 3 audio coding technology licensed from Fraunhofer IIS and Thomson DVD Logo is a trademark of DVD Format Logo Licensing Corporation The Wi Fi CERTIFIED Logo is a certification mark of the Wi Fi Alliance The Wi Fi Protected Setup Mark is a mark of the Wi Fi Alliance Wi Fi Wi Fi Protected Setup WPA and WPA2 are marks or registered marks of the Wi Fi Allianc
54. ull bend or place heavy items on the lead Do not handle the plug with wet hands Hold onto the mains plug body when disconnecting the plug Do not use a damaged mains plug or socket outlet The mains plug is the disconnecting device Install this unit so that the mains plug can be unplugged from the socket outlet immediately CAUTION Unit e This unit utilizes a laser Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure e Do not place sources of naked flames such as lighted candles on this unit This unit may receive radio interference caused by mobile telephones during use If such interference occurs please increase separation between this unit and the mobile telephone This unit is intended for use in moderate climates Placement Place this unit on an even surface To reduce the risk of fire electric shock or product damage e Do not install or place this unit in a bookcase built in cabinet or in another confined space Ensure this unit is well ventilated Do not obstruct this unit s ventilation openings with newspapers tablecloths curtains and similar items e Do not place the unit on amplifiers receivers or equipment that may become hot The heat can damage the unit e Do not expose this unit to direct sunlight high temperatures high humidity and excessive vibration Batteries Mishandling of batteries can ca
55. use electrolyte leakage and may cause a fire e Danger of explosion if battery is incorrectly replaced Replace only with the type recommended by the manufacturer e When disposing of the batteries please contact your local authorities or dealer and ask for the correct method of disposal e Do not mix old and new batteries or different types at the same ime e Do not heat or expose to flame e Do not leave the battery ies in a car exposed to direct sunlight or a long period of time with doors and windows closed e Do not take apart or short circuit Do not recharge alkaline or manganese batteries e Do not use batteries if the covering has been peeled off Remove batteries if you do not intend to use the remote control for a long period of time Store in a cool dark place Restriction on use of unauthorized copied content This unit adopts the following technology for copyright protection Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commercially produced film and videos and their soundtracks When a prohibited use of an unauthorized copy is detected a message will be displayed and playback or copying will be interrupted More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http www cinavia com To request additional information about Cinavia by mail send a postcard with your mailing address to Cinavia Consume
Download Pdf Manuals
Related Search