User Manual - Broadcast Services Ltd
Contents
1. Model 1071C 7 On camera LCD Monitor User Manual Please read this User Manual throughout before using Preface Congratulations on your purchase of this product Please read this user manual carefully 1 All internal technologies of this product are protected including device software and trademark Reproduction in whole or in part without written permission is prohibited 2 All brands and trademarks of SWIT Electronics Co Ltd are protected and other relative trademarks in this user manual are the property of their respective owners 3 Due to constant effort of product development SWIT reserves the right to make changes and improvements to the product described in this manual without prior notice 4 The warranty period of this product is 2 years and does not cover the following 1 Physical damage to the surface of the products including scratches cracks or other damage to the LCD screen or other externally exposed parts 2 Misuse abuse or negligent operation to the product 3 The product is disassembled by anyone other than an authorized service center It is considered normal that the LCD bright dot defects are not to exceed three 5 For any suggestions and requirements on this product please contact us through phone fax Email etc SWIT Electronics Co Ltd Address 10 Hengtong Road Nanjing Economic and Technological Development Zone Nanjing 210038 P R China Phone 86 25 85805753 Fax 86 252. 85805296 Email contact swit cc Website http www swit cc Maintenance The Monitor 1 Please keep the signal terminals and the cooling vent away from knife edge metal or liquid in order to avoid short circuit and damage 2 Please don t try to disassemble any parts of the monitor by yourself which would probably damage the monitor and do harm to human body and it will cause the invalidation of product warranty 3 Please don t touch the screen with your fingers which would probably deface the screen 4 Please don t press the screen the LCD is extremely exquisite and flimsy The power Please use the power adapter provided or recommended by the manufacturer in order to avoid damage For a third party power adapter please make sure the voltage range supplied power and polarity of power lead are fit Please disconnect the power cable under the following situations 1 If you do not operate this monitor for a period of time 2 If the power cable or power adaptor is damaged 3 If the monitor housing is broken Working Environment 1 Please don t lay this product on the unstable place 2 Please don t lay this product in hot cold or wet location Cleaning 1 Please clean the screen with dry and downy cloth or special LCD cleanser 2 Please do not press hard when cleaning the screen 3 Please do not use water or other chemical cleanser to clean the screen The chemical may damage the LCD 4 For first time use please tear off
3. the factory LCD film To protect the LCD screen please post the LCD protection film offered in the package 1 Features High resolution LCD Panel 7 inch 16 9 1024x600 16 77 million colors 900 1 contrast 500cd m2 brightness and H160 V160 wide viewing angle Multi Input Output Support HDMI CVBS input and loop through output and analog audio L R input HDMI embedded audio output Convert HDMI embedded audio to analog and output via 3 5mm earphone jack Underscan and Overscan Switch between underscan and overscan mode Safe area The safe area is offered to mark an area of picture that can be seen on the television screens Pixel to pixel zoom in The real time zoom in function is to enlarge to the input video as pixel to pixel from the center Image flip Rotate the image by 180 User definable function keys There are 2 function keys on the monitor front panel and users could define the functions to the keys to achieve shortcut User editable video title User can edit a video title for the current camera and the title will display on the top of screen Front and Rear 3 color TALLY light 2 TALLY lights design to give live signals to people in front of the camera as well as the camera operator behind Snap on DV battery mount The monitor supports various types of DV battery mounts and the DV mounts can be easily taken off and changed to another type 2 Panel Instruction Front vi
4. SPLAY submenu is to select the items to be displayed on screen when DISPLAY button is pressed P EERI Ma Revolve OK to turn on off the items SYSTEM ear 1 INFO Including Input format aspect ratio MSD underscan overscan zoom status TUILE 2 MARKER Safe area 3 TITLE User edited title 4 MARKER4 3 The 4 3 scale mark on 16 9 image Only available under HD input 3 6 F KEY submenu The F KEY Submenu is to define Function Key F1 and F2 The available function items are PICTURE F1 KEY lt O1 RATIO gt SYSTEM F2 KEY lt 4 O2 SCAN gt 01 RATIO Aspect ratio switch OSD 02 SCAN Underscan Overscan switch TITLE 03 ZOOM Picture Zoom in DISPLAY 04 B W Color Black amp white switch 05 FLIP Image flip ADJ OK man EXIT 4 TALLY Light Operation There are front and rear TALLY lights on the monitor which can display RED GREEN and YELLOW signals The TALLY light controlling port is the RS232 socket at the rear panel and terminal description is as follows R G Y Termini 1 2 3 67 8 99 Description Y G R GND GND GND The RED light is on when connecting the terminal R with GND and goes out when disconnecting The GREEN light is on when connecting the terminal G with GND and goes out when disconnecting The YELLOW light is on when connecting the terminal Y with GND and goes out when disconnecting 5 Cold Shoe Bracket
5. The SYSTEM submenu includes 1 RATIO Aspect ratio 16 9 4 3 selection SYSTEM 16 9 2 SCAN UNDERSCAN OVERSCAN selection PICTURE aan 3 ZOOM OFF ZOOM1 and ZOOM selection of ZOOM1 Canon DSLR scale zoom in OSD lt 80 ZOON2 Pixel to Pixel zoom in fie 4 4 MARKER Select and set the safe area scale from pai 80 85 90 and 95 F KEY FLIP Select ON to flip the picture by 180 6 RESET Select YES to recover all to factory setting 3 3 OSD submenu The OSD submenu includes 1 LANGUAGE Menu language selection 2 H POSITION Menu horizontal position 0 100 a cet mei adjustment real time preview and default value 50 ie _ 3 V POSITION Menu vertical position 0 100 TITLE coats adjustment real time preview and default value 50 DISPLAY 4 DURATION Menu timeout setting 5 60 F KEY Set a time in seconds in which the menu will automatically quit if remains idle Default 15 gt EXIT 3 4 TITLE submenu Revolve OK button to select the letters and press OK PICTURE to input Select SPACE to input space and DEL to delete SYCTEN the left letter Max 10 letters are supported After setting press MENU the system will save data to current user and quit menu The menu will automatically ee ae DISPLAY save and quit if it remains idle F KEY OSD ADJ OK SERME 3 5 DISPLAY submenu The DI
6. The provided monitor bracket supports both cold shoe and screw mount for camera connection 1 For cold shoe anticlockwise screw the knob to draw the bolt back slide the cold shoe mount into camera and then clockwise adjust the knob to fasten 2 For screw mount clockwise screw the knob to draw the bolt directly into the screw thread of camera till fastened 3 Screw the ball head knob into monitors and lock the ball head q Lock 2 Knob 3 Cold shoe mount 4 Screw bolt OO 6 Optional Battery Mount 6 1 Battery mount choice S 1071C monitor can use Gold mount V mount batteries and DV batteries by connecting with SWIT S 7004 Snap on mount There re following types of S 7004 for choice Modei Compatible battery type Recommended SWIT battery Remark The Gold mount and V mount are fixed on monitor at factory not snap on types 6 2 Installation of S 7004 snap on DV mount Battery release Terminal Slot S 7004 DV mount is snap on type Please follow the instructions 1 Please make sure the power terminals are clean and in well condition before use 2 Align the S 7004 slots to the bolts of the monitor rear panel and press tightly in 3 Slide the S 7004 mount down to the bottom 4 Fix the S 7004 mount by provided screws on the top side 5 Mount the corresponding battery to S 7004 to power the monitor 7 Specifications LCD Performance Size Display area Resolution Aspect ratio Br
7. and Yellow 3 color TALLY indicator 3 Battery mount install Connect with Gold mount V mount or SWIT S 7004 series snap on DV mounts see details in Optional Battery Mount 4 CVBS IN Composite video input BNC connector 5 HDMI LOOP HDMI loop through output 6 HDMI IN HDMI input 7 TALLY controlling port RS 232 8 AUDIO L Stereo audio left channel input RCA connector 9 AUDIO R Stereo audio right channel input RCA connector 0 CVBS LOOP Composite video loop through output BNC connector Input formats Input Supported formats CVBS PAL NTSC 4801 5761 480P 576P 1080i 60 59 94 50 720p 60 59 94 50 1080p 60 59 94 50 30 29 97 25 24 23 98 HDMI 3 Menu Operation 1 Press MENU and it will display menu system 2 Revolve OK to select an item The selected item will be highlighted display 3 Press OK to enter the selected item 4 Under menu system press MENU to back to previous menu The menu will automatically save and quit if it remains idle 3 1 PICTURE submenu The PICTURE submenu includes CONTRAST 1 CONTRAST 0 100 value adjustment SYSTEM BRIGHTNESS 2 BRIGHTNESS 0 100 value adjustment OSD 3 HUE 0 100 value adjustment TITLE SATURATION Only available under CVBS NTSC input REPERI SHARPNESS 4 SATURATION 0 100 value adjustment 5 SHARPNESS 0 100 value adjustment ADJ OK EXIT 3 2 SYSTEM submenu
8. ew 1 2 3 4 9 6 7 8 9 10 14 PHONE POWER 1 2 8 9 10 11 12 13 PHONE 3 5mm Earphone jack for HDMI embedded audio and L R analog audio monitoring POWER Power on off Connect with power cable press the POWER and the monitor will be switched on and get into normal working status Press the POWER again the indicator is turned off and monitor is switched off Disconnect with power cable or battery if the monitor will not be used for a period of time CVBS Press to switch the input signal to Composite video HDMI Press to switch the input signal to HDMI B W Black and White mode OVERSCAN Overscan Underscan switch MENU Press to enter Menu F1 User definable function key 1 F2 User definable function key 2 RATIO 16 9 and 4 3 switch D ZOOM Picture Zoom in 12 13 Press ZOOM to switch ZOOM1 Canon DSLR scale zoom in and ZOOM2 pixel to pixel zoom in DISPLAY Display current settings Press Display to display safety mark title and the current input signal information OK Select and Apply Under menu system revolve OK to adjust settings and press to apply and out of menu system directly revolve OK to adjust volume 4 TALLY Light Red Green and Yellow 3 color TALLY indicator Rear view 1 DC 12V IN Connect with DC12V 4 pin XLR power adapter Pin 1 Negative Pin 4 Positive 2 TALLY Light Red Green
9. ightness Contrast Color Viewing angle Horizontal 160 Vertical 160 CVBS ie Working voltage DC 12V or battery 6 5V 17V 8 Packing List Simple Package 1 Monitor 2 User Manual 3 Power adaptor 4 Power cable 5 Cold shoe bracket 6 Sun hood 7 LCD protection film 9 D tap to 4 pin XLR cable 10 Extension arm trestle 11 Carrying case
Download Pdf Manuals
Related Search