1 U 4 - 8 - 16 Channel DVR User's Manual
Contents
1. Detect Trigger the motion detect camera mask or video loss signal When the above alarm is set as the opening recording the detection recording state is on The video file type is M Alarm This triggers the external alarm signal in the set time section When the above alarm is set as the opening recording the detection recording state is set to on The video file type is A Note Refer to chapter 4 3 to set corresponding alarm function 4 2 2 Playback Refer to chapter 3 5 2 4 2 3 Backup You can backup the video files to external storage through setup Note The storage must be installed before the file backup If the backup is terminated the files already backed up can be played back individually 2 O Name Type 1 E Dev USB DISK 2 Hl DevaDE DVD RW Picture 4 3 Backup Detect Detects the storage connected with the DVR such as hard disk or universal disk Erase Choose the file to delete and click erasure to delete the file Stop Stop the backup Backup Click backup button and the dialog box pops up You can choose the backup file according to type channel and time recorded 26 Main Menu gt Record gt Backup gt Backup rype All z Channel 1 z Start Time MY 2010 08 11 00 00 00 Remove End Time SR 2010 08 11 16 504 20 Add O Channel File Name Length Required Remaining 0 00 KB 1 00 GB oo eee Start Cancel Picture 4 4 File Backup Rem2. Cancel Picture 4 33 Account Modify User Modify the existed user attribute Modify Group Modify the existed team attribute Modify Password Modify a user password You can set 1 6 bit passwords A blank at the beginning or end of the attribute is invalid A blank in the middle of the attribute is valid Note The user who possesses the user control authority can modify his her own or other users passwords 40 Main Menu gt Advanced gt Account gt Modif y Pass Y User Name fadmin Old New Confirm Picture 4 34 Modify Password Add user To add a user to the team and set the user authority Enter the menu interface and input the user name and password Choose the team and choose whether cover using is to be activated Cover using means that the account can be used by multiple users at the same time Once you choose the team the user authority is in the subclass of that team We recommend that the common user s authority is lower than the advanced user Main Menu gt Advanced gt Account gt Add User User Name Kcuseable Password Confirm Memo Y GROUP admin 53 EI Authority 1 shutdown the device 2 z Channel Title 3 z Schedule 4 A Backup 5 z HDD Management 6 z PTZ Control m m OK Cancel Picture 4 35 add user Add Group To add a new user team and set their authority There are 36 different authorities shut down the equipment real time surveillance playback recording setup vid
3. There are two methods for you to play the video files in the hard disk 1 In the desktop shortcut menu 2 Main menu gt Record gt Playback Note The hard disk that saves the video files must be set as read write or read only state 4 5 1 14 OLDIES Picture 3 4 video playback 1 Listed files 2 File information 3 File searching 4 File backup 5 Operation hint 6 Playback control Listed files Look up the listed files that accord with the searching criteria File information Look up the found file information File backup Backup the chosen file Click the button and operate as followed Note The storage must be installed before the file backup If the backup is terminated the files already backedup can playback individually KH ern AN A ep x a c d D Name Type Remain Tot H Name Type Remain Total Detect F Dev USB DISK 1 00 GB 1 00 G Backup Ll Dev IDE DVD RW 1 00 GB 1 00 GB a Pa Cancel Picture 3 5 detect the storage Detect Detect the storage connected with the DVR such as hard disk or universal disk Erasure Choose the file to delete and click erasure to delete the file Stop Stop the backup Backup Click backup button and the dialog box is popped up You can choose the backup file according to the type channel and time 15 Main Menu gt Record gt Backup gt Backup Type All Channel Start Time B 2010 08 11 00 00 00 Remove End Time B 2010 08
4. ll 16 09 OS Add e O Channel File Name Length Required Remaining 0 00 KB 1 00 GB Start Cancel _ Picture 3 6 recording backup Remove Clear the file information Add Show the file information satisfying the set file attributes Start Pause Click the play button to start the backup and click the pause button to stop the backup Cancel During backup you can exit the page layout to carry out other functions File searching Search the file according to the searching parameter A File Type All Y Read Write chore ollo tools Start Time 2010 08 Ol 00 00 00 End Time 2032 01 01 00 00 00 Play Search Cancel Picture 3 7 file searching File type Set the searching file type Channel Set the searching channel Start Time Set the searching time scan Playback control Refer to the following sheet for more information 16 Button Function Button Function KR Sum WM Previous frame E A E SE SC EUROS Table 3 2 Playback control key Note Frame by frame playback is only performed in the pause playback state Operation hint Display the function of the cursor place Special functions Accurate playback Input time h m s in the time column and then click play button The system can operate accurate playback according to the searching time Local zoom When the system is in single window full screen playback mode you can drag your mouse in the screen to select
5. 44 28 2010 08 12 10 32 30 I User default Log 2010 08 12 10 32 30 i User admin Log 5 2010 08 12 10 32 38 Save Configuratio Location 7 2010 08 12 10 32 38 Save Configuratio Regular 8 2010 08 12 10 32 39 WI Shut Down _2010 8 12 10 32 39 Remove Cancel Picture 4 45 LOG 4 6 4 Version Display the basic information such as hardware information software edition issue data and so on Main Menu gt Info gt Version Record Channel 8 MO AO Alarm In D Alarm Output 0 System V2 62 R07 Build Date 2011 07 14 14 28 25 SerialNo 0257769490a2 Status 43 Picture 4 46 Version 4 7 Shut down system Refer to chapter 3 5 8 45 5 FAQ and maintenance 5 1 FAQ If the problems are not listed please contact the local service or call the HQ service We are willing to offer the service Le NOOR 0 N RE 2 on BW DN Fe DVR O 3 SS OO b i ta 4 O ES OO b i EA The DVR can not boot up normally Possible reasons are as followed The power supply is not correct Switch power supply line is not in good connection Switch power supply is damaged The program updating is wrong The hard disk is damaged or the hard disk lines are broken The front panel is damaged The main board of the DVR is damaged The DVR reboots automatically or stops working after boot up a few minutes Possible reasons are as followed The input voltage is not stable or too low The hard disk is damaged or
6. CAM 7 Nonce CAM 8 Nonce CAM 9 None H CA None CAM Il None CA None CAM 13 None 0 CAM 14 None CAM IS None 0 CAM l6 None m m OK Cancel Picture 4 8 PTZ Activation Delay When alarm is over recording will last a few seconds 10 300sec then stop Show message Pops the alarm information dialog box into the local host computer screen Send EMAIL means sending an email to the user when the alarm is turned on Note Set in the NetService and send email 4 3 2 Video Blind When the video image is influenced by the environment such as excessive brightness or reaching the set sensitivy parameter the camera mask function and the linkage function are turned on Main Menu gt Alarm gt Video Blind Channel 1 x Enable y Sensitivity Middle 7 Period Set Alarm Output Record Channel Four Snapshot PTZ Activation Delay Send Email Buzzer FTP upload Advanced OK Cancel Picture 4 9 Video Blind Set method refer to chapter 4 3 1 Motion detect Note Advanced button is the same as rightclick 4 3 3 Video Loss When the equipment can not obtain the channel video signal the video loss alarm is turned on and the linkage function is turned on 29 OS Channel 1 Y Enable Period Alarm Output Record Channel E rour Snapshot PTZ Activation Set Delay Show Message Send Email Buzzer FTP upload Advanced OK Cancel Picture 4 10 Video loss Set method refer to chapter 4
7. UD 24 Bele Sain MENU Navigation EE 24 42 Record ss NBR N 25 4 2 1 488857 Config P mr cc mp 239 S PlayDaChkgg Wi TN O A 26 a A A A E 26 d A OA SOE A gto o Za 4 3 1 Motion Detect We e EE on 4 3 2 VidesiBTMO cc E E 29 4 3 Ji NU TE Eege TT um 29 Meme PAS a E RT emm E 30 4 AF Stem ic E A eee 6l 4 4 1 General maso uc A Bil 4 4 2 Encode mg cc es egos EE 32 een NCO O EEN fy Eeer E 33 A A A A r 33 4 445 GUI Display m E EES 87 4 4 6 PTZ 0 ee cg ons ce ee een 38 4 4 7 LE E DA O 39 A E A 8 39 TB OUI 39 me Nelle a ee 40 1S SMO en we e Wor BW gg t 42 4 5 4 Output adj Ml ecc E o 42 ARO IC LD UCI 42 415 08 ROSA OO e di o 43 A 1 O A A A A 43 4 5 08 Device Ir Ma A ee 0 ann 43 A 1 A av mira cstare sane EEA 44 ADA HDDINO A o o o A a a 44 op BPS eee JN E lt r 44 WAS d O A A A PA dh NA 45 4 0 4 Vion WS Wer eee 45 A J SMULGOWN SYSLEIE ara A 45 FAQ and maintenance 46 eee eS A MP T A 46 c Ee mr ee er Appendix 1 Remote controller Operation 52 Appendix 2 MOUSe operation nnococonociccccrcccc dl Ml a D2 Appendix 3 Technique parameters NEEN eg Welcome Thank you for purchasing our DVR This manual is designed to be a reference tool for the installation and operation of your Qvis DVR series DVR system You will find information about this Qvis DVRseries DVR s features and functions as well as a detailed men
8. a section and then left click your mouse to view this in local zoom You can right click your mouse to exit 3 5 3 Record Mode Please check the current channel status O means it is not in recording mode e means it is in recording mode You can use the desktop shortcut menu or click main menul gt recording function gt Wee Ju set to enter e EE O oe Reco or S Mode Record Mode All ly 2 3 3 6 amp 9 10 1 12 18 14 1S 16 Schedule eeeeeeeeeeeee ee Manual Stop CE A OK Cancel Picture 3 8 Record Mode Schedule Record according to the configuration Manual Click the all button and the according channel is recording no matter the channel in any state Stop Click the stop button and the according channel stops recording no matter the channel in any state IK 3 5 4 PTZ control The PTZ Operation interface is as followed The functions include PTZ direction control step zoom focus iris setup operation patrol between spots trail patrol boundary scan assistant switch light switch level rotation and so on Note 1 Decoder A B line connects with the DVR A B line The connection is right 2 Click main menu gt system configuration gt PTZ setup to set the PTZ parameters 3 The PTZ functions are decided by the PTZ protocols PTZ Control Speed Zoom Focus Iris Set Ptz Trace Cancel Page Switch Picture 3 10 PTZ setup Speed Set the PTZ rotation ran
9. info transparency and region cover Code output In the network surveillance and video file mode include channel title time display record status alarm status bitrate info transparency and region cover 37 Main Menu gt System gt GUI Display Channel Title Set ime Display y Channel Title Record Status Alarm status Transparenc Picture 4 28 GUI Display Channel Title Click the channel name modify button and enter the channel name menu Modify the channel name as required Time Display means the selected state This displays the system data and time in the surveillance window Channel Title means the selected state This displays the system channel number in the surveillance window Record Status means the selected state This displays the system recording status in the surveillance window Alarm Status means the selected state This displays the system alarm status in the surveillance window Bitrate info means the selected state The ninth window displays the code stream information in the nine window preview status Transparency Choose the background image level of transparency The range Al 284255 Resolution set the display resolution Channel Choose the set code for the output channel number Region Cover means the selected state Click the cover area button and enter the corresponding channel window You can cover arbitarily using the mouse the black region is for output Time displ
10. operation start run input msconfig and then select tools change the UAC Settings set for never notice Control is antivirus software intercept when installation can shut off the anti virus software and then install after the success of the installation to put us set to trust the control software Under win7 system CMS installation failure or after installation cannot open CMS software control is antivirus software intercept when installation can shut off the anti virus software and then install after the success of the installation to put us set to trust the control software may cause Not as administrator identity installation lead to installation does not completely or invalid 50 5 2 Maintenance 1 Please brush the printed circuit boards connectors fans machine box and associated parts regularly Please keep the earth well conected to prevent the video or audio signal from interfering with the DVR and from static or inductive electricity Do not pull out the video signal line or RS 232 port or RS 485 port with the power on Do not use a TV in the local video output port VOUT of the DVR It will easily damage the video output circuit Do not turn off the power directly Please use the turn off function in the menu or press the turn off button in the panel 3 seconds or longer to protect the hard disk Please keep the DVR away from any heat resource Please keep the DVR well ventilated for bett
11. or set uniformly Each day is divided into four time sections NW means the setup is valid Picture 4 6 set the time section Interval Only one alarm signal is turned on even if there are several motion detection signals in the set interval Alarm output Starts the external equipment of the linked alarm when the motion detect alarm is turned on Delay Delay a few moments and stop when the alarm state is turned off The range is 10 300 seconds Record channel Choose the recording channel multiple options are supported Trigger the video signal when the alarm is turned on Note Set in the recording setup and perform the linked recording Start detecting video files in the corresponding time section Tour M means that the selected channel is a single window alternate patrol preview The interval is set in the MainMenu gt System gt Tour Snapshot Choose record channels when the alarm activates the system triggers the related channels for a snapshot signal Note For snapshot activation please go to set period detect and alarm enable at MainMenu gt Record gt Record config PTZ Activation Set the PTZ activation when the alarm is turned on Note PTZ activation is set in the shortcut menu gt PTZ control Set the patrol between spots trail patrol and so on 28 Main Menu gt Alarm gt Motion Detect gt PTZ Activation CAM 1 None bd E L CAM 2 None CAM 3 None CAM 4 None CAM 5 None CAM None
12. x8 detection areas multiple sensitivity Bidrectional Talk Support Record Recording mode manual gt alarm gt motion detect gt timing And Playback Playback Any channels playback multiple channels playback Time searching calendar searching affair searching channel searching information searching 53 Other Power supply 12V 2A external power supply lt 15W without hard disk Working 0 C 55 C temperature 86kpa 106kpa 260 200 43mm 2kg without hard disk 54
13. 1U 4 8 16 Channel DVR User s Manual GS VIS ENHANCE YOUR DVR WITH OUR WIDE RANGE OF VIS CAMERAS OUR PRODUCTS ARE FULLY TESTED TO WORK TOGETHER QUIS ws Ee EYEBALL DOMES P400 CAMERAS VANDAL DOMES QVIS Eo PTZ CAMERAS INTERNAL DOMES MINI CAMERAS DONT SETTLE FOR LESS ALL OUR PRODUCTS CARRY lt 2VIS LOGOS Directory 1 Production Introduction do En Oe 6 NEIERENS NNNENEN NK NN NR NNN NNN NNN NNN NEEN RN EN NN NNN KAN 6 eT OS A EE HEET TEE 6 Open package check and cable connections 8 2 1 Mtiacheck Qa Qi ee ee gt Me 8 A Aca ISK installation EEN 8 2 33 E aorin 9 2 4 AS le TWA ARA A A Al en 10 2 5 Audio and video input and output CONNECTIONS occccccononononon 10 2 5 18M Videoinput connec TONo NNN EN 10 2 5 2 Video output connections and Options occccconocononecoronono 10 Ame 2 Audio signal Ippu nf SM n Ip 2 5 4MAydIo signal ont sl e D D Lei 2 6 23 due konet Ne a E aaeeea EI Basic Opera eg DEE E ERR lr OM TT TT A if if Ce AA Po ah EZ Cow SO occ D e co I2 Sl ee O Serre S SMO Desktop shortcut MENU occcocccccnccccaicco uge nn 9 3 5 1 Main menu a Mn eee eee 14 3 5 2 Playbaall Mice ee A met 14 3 5 IK TEA sh SO A AAA 17 Ge Control A ee ce 18 3 5 SE Colo SETTING ege gue SP 3 5 6 Output adjust simo AAA E ZZ 25 7 Logo A S ae os 23 3 5 CRAROu swit Sp i ca ene PS Dt Us A Wo coco is
14. 3 Screw on the hard disk 4 Connect SATA power wire 6 Ensure the right connections 8 Screw on the cover 9 Installation finished 2 3 Front panel may vary on some models 1 Alarm indication light 123 4 6 2 Record indication light 3 Power indication light ES 5 Menu 6 Direction and OK ON NN ON ONO 2 4 Rear panel 1 Video Input 4 Network 7 USB 2 Video Output 5 Audio Output 8 Power Input 3 Aucio Input 6 VGA 2 5 Audio and video input and output connections 2 5 1 Video input connections The video input port is a BNC connector plug The type of input signal is PAL NTSC BNC 1 OVP P 750 The video signal must be of the correct standard and have a high signal to noise ratio low aberration and low interference The image must be clear and have natural color and brightness in the environment in which it is to operate Insure the vidicon signal is stable and credible The vidicon should be installed in a suitable location where is away from backlighting and low illumination or uses backlighting and low illumination compensation The earth and power supply of the vidicon and the DVR should be shared and Stable Insure the transmission line is stable The video transmission line should be a high quality coaxial pair which is suitable for the transmission distance If the transmission distance is too great you should use shielded twisted pair video compensation equipment or transmit by fibe
15. 3 1 Motion detect Note Advanced button is the same as rightclick 4 3 4 Abnormal Analysing and inspecting current software and hardware of the device When some abnormal events happen the device will make a relative answer such as show message and buzzer Ta Main Menu gt Alarm gt Abnormality Event Type No Disk x Enable Show Message LJ Buzzer SD CNT OK cancel Picture 4 12 Abnormal Event Type Selecting the abnormity you want to inspect Enable Select it to make sure the abnormal function works Show message Automatically an alarm cue dialog box comes up on the main screen Buzzer Device will have two long nosie di di while the alarm is happening 30 4 4 System setup Set the system parameters such as General Encode NetWork NetService GUI Display PTZ Config RS232 and Tour Setup 4 4 1 General 24 HOUR ENGLISH HDD Full Overwrite DVR No Video Standard PAL Picture 4 13 General setup System time Set the system data and time Date format Choose the data format YMD MDY DMY Date Separator Choose list separator of the data format Time Format Choose time format 24 hour or 12 hour Language Arabic Czech English Finnish Greek Indonesian Italian Japanese Portuguese Russian Thai T Chinese S Chinese Turkish Brazilian Bulgarian Farsi French German Hebrew Hungarian Polish Romanian Spanish Swedish Vietnamese HDD full Choose stop record St
16. B WN e 20 E WN FR Network connection is not stable Possible reasons are as followed Network is not stable IP address is conflicted MAC address is conflicted The net card of the DVR is bad There is something wrong with the USB backup or writing a CD Possible reasons are as followed The rewritable machine and the hard disk are shared the same data lines The data is too much Please stop recording and backup The data exceeds the backup storage The backup equipment is not compatible The backup equipment is damaged The keyboard can not control the DVR Possible reasons are as followed The serial port of the DVR is not set correctly The address is not correct When multiple transformers are connected the power supply is not large enough Please give each transformer individual power supply The distance is too far Alarm can not be recessional Possible reasons are as followed The setting of the alarm is not correct The alarm output is turned on manually The input machine is damaged or the connections are not correct There are some problems for specific program edition Please update the program Alarm is not working Possible reasons are as followed The setting of the alarm is not correct The connection of the alarm is not correct The alarm input signal is not correct A alarm is connected with two loops synchronously The remote controller is not working Possible reasons are as fo
17. NTP server Time zone London GMT 0 Berlin GMT 1 Cairo GMT 2 Moscow GMT 3 New Delhi GMT 5 Bangkok GMT 7 Hongkong Beijing GMT 8 Tokyo GMT 9 Sydney GMT 10 Hawaii GMT 10 Alaska GMT 9 Pacific time GMT 8 American mountain time GMT 7 American mid time GMT 6 American eastern time GMT 5 Atlantic time GMT 4 Brazil GMT 3 Atlantic mid time GMT 2 Update Period he same with the NTP server check interval Default 1 Ominutes 34 EMAIL setup lf the alarm is turned on or the alarm linkage photos are taken the system can send an email of the alarm information and the photos to an appointed address Main Menu gt System gt NetService gt EMAID Enable a SMTP Server Your SMTP Server Port Need ssL User Name Alarm Message OK Cancel Picture 4 21 EMAIL SMTP server Email server address This could be an IP address or a domain name A domain name can only be used if it has the correct DNS configuration Port Email server port number SSL Decide whether to use Secure Socket Layer protocol to login User Name Apply the email server user name Password Input the user password Sender Set the senders email address Receiver Send the email to the appointed receiver s when the alarm is turned on You can set up to three receivers Title You can set this as you wish IP Filter setup When choosing from the white list only those IP addresses listed can connect to the DVR Up to 64 IP addresses ar
18. PPOE NTP Email IP purview DDNS parameter GUI display Set channel name preview hint icon state transparency cover area time title channel time fold PTZ configuration Set channel PTZ protocol address baud rate date bit stop bit check Set patrol mode and interval time Management Hard disk Set appointed hard disk as read write disc read only disc tools management or redundant disc clear data resume date and so on User management Modify user team or password Add user or team Delete user or team Online user Break the connection with the already login user Lock the account after break until booting up again TV adjust Adjust TV upside downside nearside starboard distance Automatic Set automatic reboot system and automatic deleting files maintenance Restore Resume setup state common setup code setup record ing setup alarm setup network setup network service preview playback serial port setup user management 24 System Hard disk information Display hard disk capability and recording time information ar Code stream statistics Display code stream information Log information Clear all log information according to the log video and time Edition information Display edition information Shut down Logout or reboot 4 2 Record 4 2 1 Record Configuration To set the recording parameters in the surveillance channel The system is set up for 24 hours consecutive recording in the first startup You
19. ay Channel Title 4 4 6 PTZ setup Picture 4 29 PTZ setup 38 Channel Choose the dome camera input channel Protocol Choose the corresponding dome protocol PELCOD as an example Address Set as the corresponding dome address Default 1 Note The address must be consistent with the dome address Baud rate Choose the corresponding dome baud rate length You can control the PTZ and vidicon Default 115200 Data bits Include 5 8 options Default 8 Stop bits Include 2 options Default 1 Parity Include odd check even check sign check blank check Default void 4 4 7 Tour setup Set the patrol display MW means that the tour mode is turned on You can choose the single window four windows nine windows sixteen windows patrol display or single display Picture 4 31 tour setup Interval Set the patrol switch interval The set range is 5 120 seconds Note means turn off on the patrol 4 5 Advanced 4 5 1 HDD Manage Configure and manage the hard disk The menu displays current hard disk information hard disk number input port type status and overall capability The operation include setup the write read disk read only disk redundant disk hard disk format resume default Choose the hard disk and click the right function button to execute Note Read Write Disk The equipment can write or read data Read only Disk The equipment can read data but can not write data Redundant Disk Do
20. boot the system 3 5 8 Window switch Preview in a single window four windows eight windows nine windows sixteen windows according to your choice 23 4 Main menu 4 1 Main menu navigation Main menu Sub menu Function Record Config Set the recording configuration recording type recording time section Playback Set recording look up recording play video file storage Detect or format backup equipment back the selective files Motion detection Set motion detect alarm channel sensitivity area linkage parameters defending time section alarm output screen hint recording PTZ patrol Video blind Set camera mask alarm channel sensitivity linkage parameters defending time section alarm output screen hint recording PTZ patrol Video loss Set video loss alarm channel linkage parameters defending time section alarm output screen hint recording PTZ patrol Abnormality Set alarm actived by no disk disk error and disk no space System General Set system time data format language hard disk full Configuration configuration time operation machine number video format output mode summertime stay time Encode Set main assistant coding parameter code mode configuration resolving ability frame rate code stream control image quality type code stream value frame between value video audio enable Network Set basic network parameters DHCP and DNS param configuration eters network high speed download P
21. can enter main menu gt recording function gt recording setup to set Note There must be at least one read write hard disk refer to chapter 4 5 1 Picture 4 1 Record Config Channel Choose the corresponding channel number to set the channel Choose the all option to set every channel to the same Redundancy Choose the redundancy function option to implement the file double backup function Double backup is writing the video files to two hard disks When you do the double backup make sure that there are two hard disks installed One is read write disk and the other is redundant disk refer to 4 5 1 Length Set the time length of each video file 60 minutes is the default value PreRecord Record 1 30 seconds before the action time length is decided by the code stream Record mode Set the video state schedule manual or stop Schedule Record according to the set video type common detection and alarm and time section Manual Click the button and the relevant channel will start recording no matter what else the channel has been set to do Stop Click the stop button and the relevant channel stops recording no matter what else the channel has been set to do 25 Period Set the time section for common recording The recording will start only within the set range Record type Set recording type regular detection or alarm Regular Perform regular recording in the set time section The video file type is aR
22. ction button to turn the PTZ to a left hand boundary position then click Set button to enter Picture 3 15 select the left boundary return to Picture 3 10 Step2 Please click the multi arrow direction button to adjust the PTZ to the right boundary click Set button to enter Picture 3 15 then select the right boundary return to Picture 3 10 Step3 Complete setup the position of left and right boundary are now set right button click to exit PTZ Config Function Pattern Preset Patrol No Tour Pattern Left Border P Right Picture 3 15 Boundary Scan Setup 2 Boundary Scan Calls In Picture 3 10 click the Page Shift button to enter the PTZ control menu as shown in Picture 3 12 Please input the number of the scan in the value blank then click the AutoScan button the PTZ will begin to work on the scan line Click the stop button to stop 5 Rotating the Horizontal Click the Horizontally Rotating button and the PTZ will begin to rotate horizontally relative to the original position of the camera Click the Stop button to stop 6 Rotate Click on the horizontal rotating button and the PTZ will turn around 7 Reset The PTZ will restart and clear all the data back to O 8 Page Shift In Picture 3 12 click the Page Switch button to go to Picture 3 16 setting the auxiliary function Set the auxiliary number corresponding to auxiliary switch on the decoder 21 PTZ O home Direct Aux Ope Light G
23. e setup Self adaption is the tradeoff between the image quality precedence and fluency precedence Fluency precedence and self adaption are valid only when the assistant code stream is turned on Otherwise the image quality precedence is valid 4 4 4 NetService Choose the network service option and click the set button to configure the advanced network functions or double click the service button to configure the parameters Main Menu gt System gt NetService Net Server Net Server Info PPPoE 0 NTP 0 NTP 10 EMAIL 0 Your SMTP S DDNS DDNS Set Invalid FTP 0 FTP 1 xmsecu com 15000 aot OK Cancel Picture 4 18 NetService 33 PPPOE setup Main Men u gt System gt NetService gt PPPOE Enable Picture 4 19 PPPOE Input the user name and password that the ISP Internet service provider provides After saving it reboot your system Then the DVR will build a network connection based on PPPoE The IP address will change into a dynamic IP address after the above operation is done Operation After PPPoE dialing is successfully look up the IP address in the IP address and obtain the current IP address Then use this IP address to visit the DVR through user port NTP setup Main Menu gt System gt NetService gt NTP OK Cancel Picture 4 20 NTP The NTP server must be installed in the PC Host computer IP Input the IP address installed NTP server Port Default 123 You can set the port according to
24. e data line of the hard disk is damaged The hard disk is damaged Update the different program with the origin program files The video files to look up are covered The recording is not on The local video is not clear Possible reasons are as followed The image quality is too bad The reading program is wrong Reboot up the DVR The data line of the hard disk is damaged The hard disk is damaged The hardware of the DVR is damaged There is no audio signal in the surveillance window Possible reasons are as followed It is not an active tone arm It is not an active sound box The audio lines are damaged The hardware of the DVR is damaged There is audio signal in the surveillance window but no audio signal in the playback state Possible reasons are as followed Setting issues the audio option is not chosen The according channel is not connected with the video The time is wrong Possible reasons are as followed Setting is wrong The battery is in bad connection or the voltage is too low The oscillation is damaged 47 TR N FE NO OT 0 1422 U Ne 13 N O18 WD 14 On OO PS OO bi kA The DVR can not control the PTZ Possible reasons are as followed There is something wrong with the frontal PTZ The setting connection or the installation of the PTZ decoder is not correct The connections are not correct The PTZ setting of the DVR is not correct The protocols of t
25. e supported in this white list When choosing from the black list only these listed IP addresses cannot connect to the DVR Up to 64 IP addresses are supported in this black list You can delete the set IP address by v in the options Note When the same IP address is in the white and black list at the same time the black list takes precedence Main Menu gt System gt NetService gt IP FILTER Enable Picture 2722 IP IP FILTER 35 DDNS dynamic domain name server Local domain name Insert the domain name registered by the DDNS User name Insert the user name Password Insert the password When the DDNS is successfully configured and started you can connect the domain name in the IE address column to visit Note The DNS setup must be configured correctly in the network setup Main Menu gt System gt NetService gt DDNS DDNS Type CN99 gt Enable Picture 4 23 DDNS setup FTP setup FTP is available only when an alarm happens or an alarm activates a record and takes a snapshot it will then upload the related records and snapshot pictures to the FIP server Main Men u gt System gt NetService gt FTP Enable User Name Picture 4 24 FTP setup Enable Click Enable to activate all settings Server IP The IP address for the FTP server Port Domain Port of FTP the default is 21 User Name User name of the FTP Password Password of user Max File Length Max length for upload files at e
26. eo file backup and so on Main Menu gt Advanced gt Account gt Add Group Name Authority i E Shutdown the device 2 H Channel Title 3 Hl schedule LI Backup DI HDD Management d E PTZ Control 7 B Account s B Query System Info E Query Log Info z Clear Log OK Cancel Picture 4 36 Add Group 41 Delete User Delete the current user Choose the user and click delete user button Delete Group Delete the current group Choose the group and click delete group button Main Menu gt Advanced gt Account gt Delete Group GROUP fuser a Name admin Memo fadministrator group LS EE Delete Cancel Picture 4 37 Delete Group 4 5 3 Online User Look up the network user information in the local DVR You can choose the network user and cut the connection Then the user is locked until next boot strap f Main Menu gt Advanced gt Online User User Name IP Picture 4 38 Online User 4 5 4 Output adjustment Refer to chapter 3 5 7 4 5 5 Auto Maintain The user can set the auto reboot time and auto file deleting time limit Main Menu gt Advanced gt AutoMaintain Every Thursday MET 01 00 Cancel Picture 4 39 Auto maintain 42 4 5 6 Restore The system is restored to the default setup You can choose the items according to the menu Main Menu gt Advanced gt Restore se select setting entries that you want to default Select all General Encode Record Config A
27. er heat radiation Please check the system and maintain regularly 51 Appendix 1 Remote controller operation 611 5 8 7 4 3 2 e Recordmode Same function as Record mode ESOS CONOS CST Appendix 2 Mouse operation Joke right hand as an example The mouse in USB connection is supported double click again to resume the multi window display Current shortcut menu in the menu Press middle Add or subtract number in the number setting button Switch the items in the combo box Page up or down in the list Choose the widget or move the item in the widget Drag mouse Set the motion detect area Set the cover area 52 Appendix 3 Technique parameters J w o o o System High performance embedded microprocessor Operation system Embedded LINUX operation system System resource synchronous multi channel recording synchronous multi channel sub code stream synchronous multi channel playback synchronous network operation Interface Operation interface 16 bit true color graphical menu interface mouse operation supportive display 1 4image display 1 4 8 9 image 1 4 8 9 16 image display display Video Video standard PAL 625line 50 f s NTSC 525 line 60 f s Surveillance image PAL D1 704x576 NTSC D1 704x480 quality Playback image PAL D1 704x576 NTSC D1 704 480 quality Video control 6 options Recording speed 100 120fps D1 200 240fps CIF 400 480fps CIF 50 60fps D1 Motion detect 64 8
28. ge Default range 1 8 Zoom Click E ES button to adjust the zoom multiple of the camera Focus Click EE button to adjust the focus of the camera Iris Click S button to adjust the iris of the camera Direction control Control the PTZ rotation 8 directions control is supportive 4 directions in Front panel is supported High speed PTZ Fullscreen shows channel image Left mouse click to control the PTZ rotation and orientation Left click mouse and then rotate the mouse to adjust the zoom multiple of the camera Set Enters the function operation menu Page switch Switchs between different pages Special functions 1 Preset To set a preset location call up the preset points and the PTZ will automatically turn to the setting position 18 1 Preset option To set a location for the preset the procedure is as follows Step1 In Picture 3 10 use the direction button to turn the PTZ to the preset position click the Settings button to enter Picture 3 11 Step 2 Click on the preset button and then enter the preset point number in the preset box shows O in box below Step 3 Click the Set button to return to Picture 3 10 to complete the setup check that the preset points and preset position corresponds Clear Preset Input preset points click Remove button to remove a preset PTZ Config Function Preset Preset Tour e Pattern Set D ae e Borde Del Preset Patrol No Picture 3 11 Prese
29. he PTZ decoder and the DVR are not matched The address of the PTZ decoder and the DVR are not matched When multiple decoders are connected the far port of the PTZ decoder line A B must connect a 120 Q resistance to reduce the reflection otherwise the PTZ control is not stable The distance is too far The motion detect is not working Possible reasons are as followed The time range set is not correct The motion detect area set is not correct The sensitivity is too low Limited by some hardware edition I can not login via web or CMS Possible reasons are as followed The system is windows 98 or win me We recommend updating to win dows 2000sp4 or higher Version or installing the software for low edition ActiveX is hold back The version is not exceeded dx8 1 Update the display card driver Network connection failure Network setting issues Invalid password or user name The CMS is not matched the DVR program version The image is not clear or there is no image in network preview state or video file playback state Possible reasons are as followed Network is not stable The user machine is resource limited Choose the play in team mode in the network setup of DVR The region shelter or channel protection is set The user has no surveillance purview The real time image of the hard disk recording machine itself is not clear 48 1 B WN FR 16 Ol gt WN LA OM rR 18 B WN FR IW
30. heir permissions can t be revised user default is the default login user whose permission can be revised but not its password 12 SYSTEM LOGIN User Name ladmin Password Please Login Picture 3 1 System Login Password protection If the password is entered continuously wrong for three times the alarm will start If the password is continuously wrong five times the account will be locked Through a reboot or after half an hour the account can be unlocked automatically For your system security please modify your password after first login 3 4 Preview You can right click mouse to choose the switch between the windows The system date time and channel name are shown in each viewing window The surveillance video and the alarm status are shown in each window Table 3 1 Preview icon 3 5 Desktop shortcut menu In preview mode you can right click your mouse to get a desktop shortcut menu The menu includes main menu record mode playback PTZ control High Speed PTZ Alarm Output Color Setting Output adjust Logout View 1 4 8 9 16 screens 13 EN Main Menu Record Mode PlayBack PTZ Control HighSpeedPTZ Alarm Output 4 Color Setting E Output Adjust Logout O view 1 E view 4 LA view g EB view 9 E view 16 Picture 3 2 Shortcut Menu 3 5 1 Main menu When you login the system main menu is shown as below Main Menu gt Advanced Picture3 3 Main Menu 3 5 2 Playback
31. hine from damage Communication interface RS485 interface which operates the alarm input and PTZ control Standard ethernet network interface which controls the telecommuting function Intelligent operating Mouse action function Fast copy and paste operating for the same setting 2 Initial check and cable connections 2 1 Initial check When you first receive your DVR please check the following 1 Please check whether there Is any visible damage to the package appearance The protective materials used for the package of the DVR can protect the DVR against most accidental damage during transportation 2 Please open the box and get rid off the plastic protective materials Check whether there is any visible damage to the DVR itself 3 Please open the machine crust and check the data wire in the front panel power wire and the connection between the fan power and the main board Front and rear panel The key functions on the front panel and the interface specification for the real panel are in the specification Please check the product type described on the front panel whether is the product type you ordered The label on the real panel is very important for after sales service Please protect it carefully If you have to contact us for after sales service please provide the product type and serial number from this label 2 2 Hard disk installation Before you first use the DVR please install the hard disk as follows
32. i Open h close Aux Num Oper l Open Close aramng ma an Page Switch E Cancel Picture 3 16 Auxiliary Function Control Intuitive Auxiliary Operation choose auxiliary equipment select Open or Close button as the switch control Auxiliary Number The operation of the corresponding auxiliary switch according to the PIZ agreement Page Shift In Picture 3 16 click Page Switch button to enter Picture 3 17 PTZ Main Menu the menu itself can be control by the menu control buttons 3 5 5 Color setting Set the selective image parameters the current channel for the single window display and cursor placed for the multi window display You can use the desktop shortcut menu to enter the interface The image parameters include tonality brightness contrast saturation You can set different parameters at different time sections Picture 3 18 Color Setting 3 5 6 Output Adjust Adjust TV output area parameters You can use the desktop shortcut menu or enter main menu gt management tools gt Output adjust 5 Output Adjust Top Deflate Bottom Deflate Left Def late Right Deflate Picture 3 19 Output Adjust 22 3 5 7 Logout To logout shut down the system or reboot the system You can use the desktop shortcut menu or enter main menul Main Menu gt Logout CA Picture 3 20 Logout Reboot the system logout Quit the menu Offer password next entrance reboot Quit the system Re
33. ich can connect a low impedance earphone and active sound box or other audio output equipments through a power amplifier If the sound box and the tone arm can not be isolated a howling phenomena is often experienced Here are some methods to deal with this phenomena 1 Adopt a better directional tone arm 2 Adjust the sound box volume to below the threshold that produces the howling phenomena 3 Use fitment materials that absorb the sound to reduce the reflection of the sound 4 Adjust the layout of the sound box and the tone arm 2 6 Speed dome connections 1 Connect the 485 lines of the speed dome with the DVR 485 interface A it R485 ALARM Di 2 Connect the video line with the DVR video input 3 Connect the speed dome to a power supply and switch on 11 3 Basic operation 3 1 Turn on Plug in and turn on the power supply switch If the Power supply indicator light lights up then the video recorder has turned on After startup you will hear a beep The default setting of the video output is a multiple window output mode If the startup time is within a set video recording time the timing video recording function will start up automatically Then the video indicator light of the corresponding channel will light up to let you know the DVR Is working normally Note 1 Make sure that the input voltage corresponds with the switch of the DVR power supply 2 Power supply demands 220V 10 50Hz We s
34. k is normal X means that the hard disk is not working means that there is no hard disk If the user needs to change the damaged hard disk then you must shut down the DVR and remove all the damaged hard disks before installing a new one behind serial number means the current working disk such as 1 If the corresponding disk is damaged the information will show as 4 6 2 BPS Displays the code stream Kb S and hard disk capability MB H in real time It displays as a wave sketch map Main Menu gt Info gt BPS Channel Kb S Channel Kb S MB H l 9 1043 440 1043 440 1043 440 1043 440 1043 440 1043 440 1043 440 1043 440 a Cancel Picture 4 44 BPS 4 6 3 LOG Look up the system log according to the set mode Log information includes the system operation the configuration operation data management alarm affairs recording operations user management file management and so on Set the time section to look up and then click the look up button The log information will display as a list one page is 128 items Press Page up or Page down button to look up and press delete button to clear all the log information Main Menu gt Info gt LOG Type All z Start T me 2010 08 12 00 00 00 H gt gt m End Time 2010 08 13 00 00 00 Log Time Type LOG I 2010 08 12 1031 49 Reboot 2000 0 00 00 00x 2 2010 08 12 10 31 49 Log In User default Log 2010 08 12 10 31 50 RecoverTime 2010 07 31 11
35. l Preset Del Tour g Picture 3 13 Cruise Between Points Settings 2 To view Cruise between Points In Picture 3 10 click the Page Shift button to enter the PTZ control menu as shown in Picture 3 12 Please input the patrol number of the cruise in the value blank then click the Cruise between Points button The PTZ will cruise from point to point on the cruise line Click the Stop button to stop the cruise 3 Scan The PTZ can also work on the preset scan line repeatedly 1 Scan setup Step1 In Picture 3 10 click the Setup button which takes you to Picture 3 14 Step2 Click the Pattern button and input a patrol value in the pattern value blank Step3 Click the begin button and enter Picture 3 10 here you can set the following items Zoom Focus Aperture Direction and so on Click Set button to go back Picture 3 14 Step4 Click the End button to complete the setup Click the right button of the mouse to exit PTZ Config Function Pattern 5 Preset Patrol No Tour CA Pattern II Begin Border End Picture 3 14 Scan Setup 20 2 Scan Calls In Picture 3 10 click the Page Shift button to enter the PTZ control menu as shown in Picture 3 12 Please input the number of the scan in the value blank then click the AutoScan button the PTZ will begin to work on the scan line Click the stop button to stop 4 Boundary Scan 1 Boundary Scan setup Step1 In Picture 3 10 click the multi arrow dire
36. larm Set NetWork NetService GUI Display RS232 Account The Configuration of Channel Encoding Channel title Time title Regional Coverage Video Color OK Cancel Picture 4 40 Restore 4 5 7 Upgrade Main Menu gt Advanced gt Upgrade Upgrade Position USB DISK Upgrade file bootfontbin Upgrade Cancel Picture 4 41 Upgrade Upgrade choose USB interface Upgrade file choose the file which needs upgraded 4 5 8 Device Info Provide device interface info like audio in alarm in out to be conveniently used for user Main Menu gt Advanced gt Device Info Audio In Channels 4 Alarm In Channels OD Alarm Out Channels 10 SD Card Record GUI Theme General Remote control type General Maximum Playback large ones 8 Default playback large ones 8 mor Cancel Picture 4 42 Device Info 43 4 6 Info 4 6 1 HDD info Display the hard disk state hard disk type overall capability residual capability the recording time and so on ype Capacity Left Capacity Status 639 96 GB 549 80 GB Read Write 58 29 GB 0 00 MB Normal Read Write 21 69 GB 0 00 MB Normal Read Write 79 99 GB 69 83 GB Normal Read Write 79 99 GB 79 99 GB Normal Read Write 79 99 GB 79 99 GB Normal Read Write 79 99 GB 79 99 GB Normal Read Write 79 99 GB 79 99 GB Normal Read Write 79 99 GB 79 99 GB Normal Read Write 79 99 GB 79 99 GB Normal View recording times Cancel Picture 4 43 HDD Info Clue O means that the hard dis
37. llowed The remote control address is not correct The remote control distance is too far or the angle is too large The battery is used up The remote controller or the front panel of the recording machine is damaged 49 2 Di 2 ay SS OO b i ta 28 24 28 The storage time is not enough Possible reasons are as followed Front vidicon quality is bad The lens is too dirty The vidicon is in back lighting installation The hard disk capability is not enough The hard disk is damaged The downloading files can not play Possible reasons are as followed There is no media player There is no DX8 1 software or higher edition There is no DivX503Bundle exe file to play AVI video files The DivX503Bundle exe and ffdshow 2004 1012 exe files must be installed in the windows xp system can not remember the advanced code or network code in the local menu operation Please contact the local service or call the HQ service We will offer the service according the machine type and the program edition Under win7 system IE control can not be automatically download and installation may cause Manual install IE plug in not as administrator identity installation lead to installation does not completely or invalid The right mouse button click need to install the control and then select installation as an administrator Automatic download control of time is intercept system Can the computer on the following
38. oftware and TCP IP network technology it has a superb network communication and telecommunication ability The DVR can be used individually or online as part of a surveillance network The DVR can be used in banks telecoms power systems prisons hospitals transportation homes factories storehouses and many other uses 1 2 Main functions Real time surveillance Analog and VGA interface VGA interface is equipped selectively Surveillance function through a monitor or a display Storage Non working hard disk dormancy processing which is convenient to radiate heat reduce power and extend the life span of the DVR A special storage format which insures the data safety Compression Real time compression by individual hard disks which insures the audio and video signal have a stable synchronization Backup Through a SATA and USB interfaces to USB equipment removable hard disks etc Also through the net to download the files to the hard disk Playback Individual real time video recording as well as searching playback network surveillance recording check downloading etc Multi playback mode Zoom in on a selected region Net operating Through net tele surveillance in real time Tele PTZ control Tele recording check and real time playback Alarm linkage Multi route relay alarm output which is convenient for alarm linkage and control Protecting circuits in the alarm input and output interface which protects the main mac
39. op recording when the hard disk is full Choose overwrite Cover the earliest recording files and continue recording when the hard disk is full DVR No Only when the address button in the remote controller and the corresponding DVR number is matched the remote operation is valid Video Standard PAL or NTSC Auto Logout Set the latency time in 0 60 O means no latency time DST Choose the summer time option and pop the dialog box as followed Picture 4 14 DST week Main Menu gt System gt General gt DST Picture 4 15 DST date 31 4 4 2 Encode setup Set the video audio code parameters video file remote monitoring and so on Set every independent channel s coding parameter in the left part and set the combine encode parameter in the right part Note Combine encode introduces video compression technique which combines and compresses multi channel s video to a special channel Applying for multi channel playback simultaneously Dial up multi channel real time monitor mobile monitor and so on Picture 4 16 Encode setup Channel Choose the channel number Compression Standard H 264 main profile Resolution Resolution type D1 HD1 CIF QCIF Frame Rate P 1 frame s 25 frame s N 1 frame s 30 frame s Bit Rate Type You can choose limited code stream or variable code stream When you choose the variable code stream there are six image quality options Bit Rate Set the code stream val
40. ove Clear the file information Add Show the file information to satisfy the set file attributes Start pause Click the play button to start the backup and click the pause button to stop the backup Cancel During backup you can exit the page layout to carry out other functions 4 3 Alarm Function Alarm functions include motion detect video blind video loss alarm input and alarm output 4 3 1 Motion Detect When the system detects a motion signal that reaches the set level of sensitivity the motion detect alarm is switched on and the linkage function is turned on S Main Menu gt Alarm gt Motion Detect Channel l y Enable Sensitivity Middle v Region P Period set Interval Alarm Output Dela Record Channel rour Snapshot PTZ Activation Set Delay Send Email Buzzer FTP upload a a mm Advanced OK Cancel Picture 4 4 Motion Detect Channel Choose the set motion detect channel Enable means that the motion detect function is on Sensitivity Choose in the six options according to the sensitivity Region Click setup and enter the set area The area is divided into PAL 8x8 Green block means the current cursor area Yellow block means the dynamic detect defensive area Black block means the unfenced area You can set the area as followed Drag the mouse and draw the area 27 Picture 4 5 Region Period Trigger the motion detect signal in the set time section You can set according to week
41. r optics to insure the signal quality The video signal line should be away from all electro magnetic Interference and other signal line equipment High voltage current should be especially avoided Insure the connection is stable The signal and shield lines should be connected with a tight connection which will help avoid false signals joint welding and oxidation 2 5 2 Video output connections and options The video output is divided into PAL NTSC BNC 1 0VP R75Q and VGA output selective configuration If you replace your Qvis monitor with a computer display there are some issues to take note of 1 Do not leave the display turned on for a long time 2 To ensure normal working demagnetize regularly 3 Keep the display away from electro magnetic Interference 10 A TV is not a suitable replacement for a video output It can only be used for a short period of time and is particuarly suseptabler to nearby interferance The TV can also damage other equipment 2 5 3 Audio signal input The audio port is a BNC connection As the input impedance is high the tone arm must be active The audio signal line should be strong and away from any electro magnetic Interference and with a credible connection which should avoid false signals and joint welding and oxidation High voltage current should be especially avoided 2 5 4 Audio signal output Commonly the output parameter of a DVR audio signal is greater than 200mv 1KO BNG wh
42. t Settings 2 To go to a Preset Point In Picture 3 10 click Page Switch button enter PTZ control interface as shown in Picture 3 12 In the input No type the preset point then click the preset button the PTZ will turn to the corresponding preset point A Preset rs OE Pattern Tour AutoScan AutoPan Page Switch Cancel Picture 3 12 PTZ Control 2 Cruise between Points A PTZ camera can be set to cruise between a series of preset points This is called a cruise To set the PTZ up to do this is as follows 1 Cruise Between Points Settings A cruise line is a set up of multiple preset connected points the setup procedure is as follows Step1 In Picture 3 10 use the Direction key to turn the PTZ to a designated location click the settings button to enter Picture 3 13 Step 2 Click the Tour button enter the tour number into the Patrol Number box if it isn t already showing and then click Add preset The number of presets in the tour will show in the Preset box 19 Step 3 repeat steps 1 and 2 until you have set out all the preset designated cruise positions Remove Preset Please input the preset value in the blank click Remove Preset button then remove the preset points Remove Cruise Line Input the number of cruise line click Remove Cruise Lines button then remove the cruise lines set PTZ Config Function Preset 5 Preset r a Patrol No l Tour e a Pattern Add Preset Border De
43. the hard disk lines are broken The power of the switch power supply is low Frontal video signal is not stable Bad heat radiator or too much dust or bad running circumstance for the The hardware of the DVR is damaged System can not detect hard disk Possible reasons are as followed The hard disk power supply line is not connected The cables of the hard disk are damaged The hard disk is damaged The SATA port of main board is damaged There are no video outputs in single channel multiple channels and all channels Possible reasons are as followed The program is not matched Please update the program The image brightness is all O Please restore the default setup There is no video input signal or the signal is too weak The channel protection or the screen protection Is set The hardware of the DVR is damaged 46 Si 6 7 8 9 10 or WINS 0O ZS 0N FP SUN W N e Real time image problems such as the image color or the brightness distortion Possible reasons are as followed When using the BNC output the option between the N mode or PAL mode is wrong and the image becomes black and white The DVR is not matched the monitor impedance The video transmission distance is too far or the loss of the video trans mission line is too large The color and brightness setting of the DVR is wrong can not find the video files in local playback mode Possible reasons are as followed Th
44. u tree Before you begin installation and operation please read the following safeguards and warnings carefully Important Safeguards and Warnings Do not place heavy objects on the DVR Please ensure no solid or liquid fall into or infiltrate the DVR Please brush printed circuit boards connectors fans machine box and so on regularly Before cleaning however please switch off the power supply and unplug it from the mains Do not attempt to disassemble or repair the DVR by yourself Do not attempt to replace any components by yourself Environment Please position and use the DVR in a dry environment between O and 40 Do not position or use in direct sunlight or near a heat source Do not install the DVR in damp smoky or dusty environment Avoid shocks or physical damage to the DVR Please insure the DVR is level and in a stable workplace Please install in a well ventilated environment Keep the vents clean Use within the rating input and output scope 1 Production Introduction 1 1 Product overview This DVR is designed especially for the security and defence field and is an outstanding digital surveillance product With the embedded LINUX operating system it is very stable and in addition has as standard the H 264mp video compressed format and G 711A audio compressed format which insures a high quality image low error coding ratio and single frame playback With our professional network video surveillance s
45. uble backup the video files in the write read disk 39 x pA HDD No Type Status Read Write LI Read Write Normal 2 jl 2 Read Write Normal Snapshot 2 1 Read Write Normal A Read only 3 1 Read Write Normal YY FT 5 4 1 Read Write Normal Redundant Read Write Normal Read Write Normal Format Pisk Read Write a AAA gt Read Write Normal Gaar Read Write Normal me Partition 00 m Cance Picture 4 32 HDD Manage 4 5 2 Account Manage the user purview Note 1 The maximum character length is 8 bytes for the following user and user team name A blank ahead of or behind a character string is invalid A middle blank in the character string is valid Legal characters include letters numbers underline subtraction sign dot 2 There is no limit to the number of users or user groups You can add or delete a user group according to the user definition The factory setup includes user admin You can set the team as you wish The user can appoint the purview in the group 3 User management includes group user The group and user name can not be the same Each user only belongs to one group Es Main Menu gt Advanced gt Account x rre 3 User Name Group Status Modify User l O admin admin GUI 2 fi guest user Normal 3 At se def t Usc S ER PR geg O default use Default Use Modify EA Add User Modify Group Add Group AAA Delete User Delete Group _
46. ue to modify the image quality The larger code stream value the better image quality D1 1000 1500kbps CIF 384 1500kbps QCIF 64 512kbps Video Audio When the icons are all displayed in reverse the video file is video and audio multiplex stream Combine Enable Combine Enable When the icons are all in reverse displayed opening combination coding functions Mode multi channel playback is used in all channels to playback simultaneously and the narrowband transmission is used in multi channel real time remote monitoring simultaneously at narrowband state especially used with a mobile screen 32 4 4 3 Network setup main Menu gt System gt NetWork SS SCENE Picture4 17 Network Net Card You can choose cable network card or wireless network card DHCP Enable Obtain IP address automatically not suggested Note DHCP server is preinstalled IP address Set the IP address Default 192 168 1 10 Subnet mask Set the subnet mask code Default 255 255 255 0 Gateway Set the default gateway Default 192 168 1 1 DNS setup Domain Name Server It translates the domain name into IP address The IP address is offered by network provider The address must be set and reboot then it works TCP port Default 34567 HTTP port Default 80 HS Download Transfer Policy There are three strategies self adaption image quality precedence and fluency precedence The code stream will adjust according to th
47. uggest using UPS to protect the power supply under allowable conditions 3 2 Turn off There are two methods to turn off the DVR Entering main menu and choosing turn off in the turn off the system option is called soft switch Pressing the power supply switch is called hard switch Illumination 1 Auto resume after power failure If the DVR is shut down abnormally it can automatically backup video and resume the previous working status after a power failure 2 Replace the hard disk Before replacing the hard disk the power supply switch in the rear panel must be turned off 3 Replace the battery Before replacing the battery the setting information must be saved and the power supply switch in the rear panel must be turned off The DVR uses a button battery The system time must be checked regularly If the time is not correct you must replace the battery we recommend replacing the battery every year and using the same battery type Note The setting information must be saved before replacing the battery otherwise information will be lost 3 3 System Login When the DVR boots up the user must login and the system provides the corresponding functions in the user preview There are three user settings The names are admin guest and default and these names have no password Admin is the super user preview guest and default s permissions are preview and video playback User admin and guest s password can be revised while t
48. very packed default 128M DirName Directory of uploading files Mobile Monitor Setup To view the device on a mobile please make a router mapping of this port and use CMS to monitor and operate it by this protocol NN ONO 36 Main Men u gt System gt NetService gt Mobil x Enable j Port OK Cancel Picture 4 26 Mobile Monitor Setup Enable Select this to make sure the abnormal function is working Port This is the port to enable mobile monitoring You will need tomake a router map of it if you want to view everything by mobile UPNP UPNP protocol can set auto port forwarding on the router make sure UPNP is running on the router before useing it Main Menu gt System gt NetService gt UPNP x Enable Make sure UPNP is running on router befori using this Picture 4 27 Enable Choose Enable to make sure all UPNP settings available HTTP Route will automatically distribute HTTP port for the device when IE viewing it need this port eg 60 12 9 26 66 TCP Router will automatically distribute TCP port for the device when monitoring via CMS it need this port MobilePort Router will automatically distribute Mobile Port for the device when mobile monitor it need this port 4 4 5 GUI Display Configure the video output parameters including the front output mode and code output mode Front output In the local preview mode and includes channel title time display record status alarm status bitrate
Download Pdf Manuals
Related Search