DA3 USER MANUAL - Innovative Technology Ltd
Contents
1. 6 2 ADDING FIRMWARE FILES TO THE FIRMWARE LIBRARY Select the Firmware Library tab The screen will show all the firmware files that are currently stored in the library on your PC Click the Import button and locate the files you wish to add the firmware files will be added to the library when you click the Open button Innovative Technology Ltd Validator Programming System VPS Version 1 0 7 Import Interface Available interfaces Bowe Boss Binary SSP Parallel Pulse ecTalk SSP Parallel Pulse MDB SSP Parallel Pulse Simple serial 2 SSP Parallel Pulse Simple serial SSP Parallel Pulse Connected Device Dataset Library Ju Memory Card Utites The screen lists the firmware interfaces that are stored in your library with the interfaces that are available by setting the validator switches The version of the stored firmware file is listed under the relevant product heading If the firmware for any product is not present then the version number will not be listed under the product heading To remove a file from the firmware library select the interface to be removed and right click the mouse Select Removed Selected Firmware from the menu to remove the firmware interface for all validator models Alternatively select Remove For Validator and then the validator Model to remove the file for individual validators Copyright Innovative Technology 04339 4 DA3 User M2. 04338 2 DA2 Installation Guide 2 CONTENTS DA2 kit contents System requirements Windows installation Verifying installation and identifying the DA2 com port Installing additional DA2s Uninstalling the DA2 1 1 2 O1 Ww N HB e e e O 0 C Copyright Innovative Technology GA338 2 DA2 Installation Guide 1 DA2 KIT CONTENTS You will have received the following items in your DA2 kit DA2 USB type A to type B cable DA2 to NV7 8 9 10 cable Power cable ITL Support CD ROM If any of these items are missing please contact Innovative Technology Ltd to arrange for replacement If you do not understand any part of this guide please contact the factory for assistance contact details are below In this way we may continue to improve our product Innovative Technology Ltd has a policy of continual product improvement As a result the products supplied may vary from the specification described here The ITL Logo is an international registered trademark and is the property of Innovative Technology Limited Innovative Technology has a number of European and International Patents and Patents Pending protecting this product If you require further details please contact the factory Innovative Technology is not responsible for any loss harm or damage caused by the installation and use of this product This does not affect your local statutory rights If in doubt please contact Innovative Technology fo
3. Quick Start Guide ITL Support CD ROM optional Or i9 I E Please check that you have received all the parts If any of these items are missing please contact Innovative Technology Ltd to arrange for replacement If you do not understand any part of this guide please contact the factory for assistance contact details are below In this way we may continue to improve our product Innovative Technology Ltd has a policy of continual product improvement As a result the products supplied may vary from the specification described here The ITL Logo is an international registered trademark and is the property of Innovative Technology Limited Innovative Technology has a number of European and International Patents and Patents Pending protecting this product If you require further details please contact the factory Innovative Technology is not responsible for any loss harm or damage caused by the installation and use of this product This does not affect your local statutory rights If in doubt please contact Innovative Technology for details of any changes MAIN HEADQUARTERS Innovative Technology Ltd Derker Street Oldham England OL1 4EQ Tel 44 161 626 9999 Fax 44 161 620 2090 E mail support innovative technology co uk Web site www innovative technology co uk Copyright Innovative Technology 04151 DA1 Quick Start Guide GROUP Technology INTELLIGENCE IN VALIDATION Automated Transactio
4. 00 ot 9 s _ ce Found New Hardware Wizard E Fides Search Reveals ha The szacha finihed reaching for diver fle for you hardware device ey The witardtound Giver fer the following dece oy USB Serial Pest Woedows bari dimos for thes dence To the dece lourd cick Neat e d devenihdpor Dmm oce Completing the Found New Hardware Wizard TL USB Sensi Port Windows hae inetaling the sofware the desse To close ther chek Fresh GA338 2 DA2 Installation Guide 3 3 WINDOWS XP HOME AND PROFESSIONAL Before connecting your DA2 insert the DA2 CD ROM into your PC Once you have connected your DA2 a message bubble will appear informing you that a new device has been connected After a few moments the Add New Hardware Wizard will start and the following screen will be displayed Make sure that Install the software automatically is checked Click on Next gt The following screen will be displayed while the Wizard searches for the driver If you have already inserted the DA2 CD ROM Windows XP will automatically find the driver When the driver has been found a message will be displayed informing you that the driver has not passed Windows Logo testing Click on Continue Anyway When the driver has successfully loaded you will see the following screen Click Finish A second Found New Hardware Wizard
5. 2 2 HARDWARE The DA2 is a Universal Serial Bus USB device It must be connected to a USB port on your PC A USB type A to type B cable is included with the DA2 The type A plug connects to your PC The type B plug connects to the DA2 The USB ports on your PC will be marked with the e USB Copyright Innovative Technology 04338 2 DA2 Installation Guide 3 WINDOWS INSTALLATION To install a DA2 you do not need to connect a Bank Note Validator or a power supply Simply connect the DA2 to the PC with the included USB cable 3 1 WINDOWS 98 WINDOWS 98SE Before connecting your DA2 insert the ITL support CD ROM into your PC Once you have connected your DA2 the Add New Hardware Wizard will start and the following screen will be displayed Click on Next gt The following screen allows you to select a method for finding the driver for the DA2 Make sure that Search for the best driver for your device is selected Click on Next gt Make sure that specify a location is checked In the location box type Drive drivers where Drive represents your CD ROM drive letter usually D Click on Next The Add New Hardware Wizard will show that the ITL USB high speed Serial Controller has been found Click on Next gt to load the driver The following screen will be displayed when the driver is loaded Click on Finish Your DA2 is ready for use Copyright Innovative Technology
6. DA3 USER MANUAL Technology Automated Transactions Bellis Technology INTELLIGENCE IM VALIDATION T INTELLIGENCE IM VALIDATIDM U0 1WIiELLIGEWLE IN VALIBATIURM MTELLIGEMCE IN VALIDATION Copyright Innovative Technology GA339 4 User Manual 2 CONTENTS 1 Introduction 3 2 Power requirements 5 3 General description 6 4 Software installation 1 5 Connecting the DA3 to a PC 8 6 Programming the DA3 10 6 1 Adding datasets to the dataset library 10 6 2 Adding firmware to the firmware library 11 6 3 Storing files on the DA3 12 6 4 Tagging files for override 13 6 5 Importing and exporting set up files 13 6 6 Summary info 14 6 7 Memory card functions 14 6 8 VPS utilities 15 1 Using the DA3 16 7 1 Connecting a validator to the DA3 16 7 2 BNV match download 16 7 3 BNV override download 17 7 4 Set BNV to check mode 17 1 5 Serial comm monitor 18 7 6 Collect note data 18 1 1 Copy A to DA3 18 7 8 Copy to A 18 7 9 Copy A to B 19 Appendix 1 Error codes 20 Appendix 2 Supported note validators 20 Copyright Innovative Technology GA339 4 DA3 User Manual 1 INTRODUCTION This manual describes the operation of the DA3 Validator Programming System programmed with firmware version VPS1001000000000 or later using the VPS software version 1 0 7 or later If you do not understand any part of this manual please contact the factory for assistance contact details are below In this way we may c
7. 5 1020 124 2 SISUNITED KI 1 510 20 1 5 10 20 GBPO3 SHEUNITED 5 10 20 124 906 SISUNITED 5110 20 5 10 20 9 903 SHEUNITED KI 1 5 10 20 15 10 20 14 901 SHEUNITED 5 10 20 510 20 GBP21 SFS UNITED 5 10 20 2 9 SISUNITED 5 10 f GBP27 704 SHEUNITED KI 510 20 510 20 GBP28 702 Mi lt gt Loaded Firmware Binary SSP Parallel Pulse ccTalk SSP Parallel Pulse MDB SSP Parallel Pulse Simple serial 2 SSP Parallel Pulse Simple serial SSP Parallel Pulse Update Device Summary Infomation L Connected Device Dataset Fimware Library Utiites Once the required files are tagged click the Update Device button to save the settings to the DA3 memory 6 5 IMPORTING AND EXPORTING SET UP FILES The files contained within the Connected Device window can be exported into a DA3 file Another user can then import this file All dataset and firmware files will be imported and the appropriate files will still be tagged This function is useful to ensure other DAS users have the same files and settings stored To export a setup file click the Export Setup File button type in a file name and select the location to store the file then click the Save button To import a setup file click the Import Setup File button locate the file you wish to import and click the Open button Once the file
8. The eearchae for DA2 Adseeer kit A devices dive iz a saturo program that matuss a haidwate device werk C Dicks alit of al the divers in specilic location 30 you can aac thre ditar you vaart va for mesi divale b ta diteer database en pour hard dive end ary of the folowing selected locations Dick New to slat the h D Floppy dek dimes Add New Hardware Wizard ITL USB hgh speed Sonal Correerter Windows has inshadinstalng Ihe eollyere thal your pes hyduye devine requires Add New Hardware Wizard ITL USB hgh Sonal Correerter Windows hae inelaling Ihe that your ness hyduye devine GA338 2 DA2 Installation Guide Found New Hardware S DAZ Adapter Kit Before connecting your DA2 insert the DA2 CD ROM into your PC Once you have connected your DA2 a window open showing your PC has found a new device When the Add New Hardware Wizard starts the Hardware Wizard following screen will be displayed Ed Click on Next gt Make sure that Search for a suitable driver for my device is checked This wied vell complete the insisllation for the device e 0A2 Adapter KA denice diver it a software progam thet makes a hachware device work Windows funis ron Blas lee pesa Puts dence To diva files and corgia the chk Nest Click on Next MI Seac
9. this point you can select which files to tag to be used for the BNV Override Download function see Chapter 6 4 Click on the Update Device button to save the listed files to the DA3 memory To remove a file from the select the files to be removed and right click the mouse Select Removed Selected from the menu to remove the files for all validator models or select Remove For Validator and then the validator model to remove the file for individual validators Click on the Update Device button to update the DA3 memory and remove the files Copyright Innovative Technology 04339 4 DA3 User Manual 6 4 TAGGING FILES FOR OVERRIDE In the Connected Device window click the revision code under the relevant product heading to tag the required dataset Each product can have a different dataset tagged For example NV7 could be tagged as UK whereas NV8 could be Euro The tagged datasets will be highlighted as red text The same procedure should then be used for tagging the firmware interfaces for each product See Chapter 7 3 for details on the BNV Override Download function Innovative Technology Ltd Validator Programming System VPS Version 1 0 7 ITL VPS Hardware Detected Serial Number 1010 Free space 3 19 M bytes Firmware Version VPS 1001000000000 Export Setup File Import Setup File Loaded Datasets Cay oeroninaio Puse B wo M v 904 SHEUNITED KI
10. will now open Make sure that Install the software automatically is checked Click on Next gt Copyright Innovative Technology 3 Found Sew Hardware DA Adapter Kit Welcome to the Found New Hardware Wizard Ther vzad helpt you natal solare bor DA2 Adapte Ka your hardware came with an metalation CD gt floppy disk insert now the waned 10 4 soltwaee sutcenstcally Reconmended trom a bet ec specie ocation Advanced Pinasa wait mide the wizard searches ey 2 2 Adapter Ka Bact j ance Hardware Installation The sofvanie pou are in ialing For this hardane ITL USB high speed Seriol Converter has not passed Windows Logo testing to very its comcebbility wih Windowe XP Tel me why the testing s important Continuing your installation sollware t destabilize the correct operation of your system s ammectatelp orin the future Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing STOP instalation Completing the Found New Hardware Wizard he wand hm the siiman foe lt ITL USB high speed Sensi Converter Welcome to the Found New Hardware Wizard Thu eacerd hebt you natal solhwane for USB Seal Port 3 M gow heedwaen came with an installation OD e disk insert now wacaed to do adt ware autom
11. ANUAL Drawing No GA339 RJS 04 01 2007 Format MS WORD 2000 Release Date Modified By 04 01 2007 RJS First draft 22 01 2007 RJS Second draft reorganised chapters Issue C 08 02 2007 RJS Third draft addition of memory card formatting Issue 1 13 02 2007 RJS Initial release 20 02 2007 RJS Updated Appendix 2 Issue 3 19 03 2007 RJS Updated Appendix 2 Issue 4 17 11 2008 RJS Updated Appendix 2 Innovative Technology has a number of European and International Patents and Patents Pending protecting this product If you require further details please contact the factory Smiley and the ITL Logo are international registered trademarks and they are the property of Innovative Technology Limited Innovative Technology is not responsible for any loss harm or damage caused by the installation and use of this product This does not affect your local statutory rights If in doubt please contact Innovative Technology for details of any changes In line with continued product development Innovative Technology Ltd reserves the right to change specifications without prior notice The data used in this document may be used as a guideline only Copyright Innovative Technology 04339 4 DA2 INSTALLATION GUIDE Technology Automated Transactions Bellis Technology INTELLIGENCE IM VALIDATION T INTELLIGENCE IM VALIDATION 7 O TRIPE REG EE IN VALIBATIURM IMTELLIGEMCE IN VALIDATION Copyright Innovative Technology
12. CONNECTION LED with flicker as data is transferred to and from the DAS If there are no matching firmware or dataset files stored on the DA3 the centre RUN button will change colour to pulsing red and the blue BNV MATCH DOWNLOAD LED will flash a code as described in Appendix 1 e If all the files are available on the the Mode Indicator LED s will rotate in an anti clockwise direction while the firmware is updated e Once the firmware update is complete the Mode Indicator LED s will rotate in a clockwise direction as the dataset is updated e When the firmware and dataset are successfully updated the centre RUN button will change to a pulsing green light and the BNV will reset e If necessary reset the BNV dipswitches to their original positions before re connecting the BNV to the host machine Copyright Innovative Technology 04339 4 DA3 User Manual 7 3 BNV OVERRIDE DOWNLOAD This mode will overwrite the BNV with pre selected Tagged firmware and dataset files For this function to operate the DA3 must have dataset and firmware files tagged for the attached BNV model See Chapter 6 4 for details on tagging files e Set the BNV to SSP mode as described in the BNV product manual Depending on the BNV model this will be either by setting the dipswitches as shown on the product label or by pressing a download reset button e Connect the BNV to the DA3 as described in chapter 7 1 and apply power either from the host
13. NV3 validators will flash the LED corresponding to the channel NV4 NV4X and NV5 validators will flash a binary pattern as shown below on the display lights on the validator In this mode all channels are enabled not inhibited Copyright Innovative Technology 04151 DA1 Quick Start Guide LED Display Led Display 12 3 1 2 3 4 4 CONNECTING A VALIDATOR TO A PC USING THE DA1 The connections are made as shown in figure 2 The cable with a 15 way connector on one end and a 5 way connector on the other is used to connect the validator to the DA1 The cable with a 3 5mm jack plug and 2 banana plugs is used to supply power to the DA1 Connect 12 volts to the red banana plug and GND OV to the black plug The 9 way D type connector should be plugged directly into the serial port of the PC taking note of the number of the serial port as this will be required later when configuring the software Once the connections have been made the appropriate software for the validator you are using will need to be installed Validator PC Serial Port Figure 2 Connecting a DA41 to a validator and PC for upgrading Copyright Innovative Technology GA151 DA1 Quick Start Guide 5 SOFTWARE INSTALLATION To install the software required to upgrade datasets and firmware insert the optional CDROM into the CDROM drive An installation menu will appear select the product that you wish to download and then select the software you wish to
14. Technology GA339 4 DA3 User Manual 5 CONNECTING THE DAS TO A PC Connection NOTE To install the drivers for the DA3 you will need administrator rights to your PC Connect the DA3 to your PC via the supplied USB cable There is no need for a separate power supply when programming the DA3 from your computer When the DA3 is only connected through the USB the functions described in Chapter 7 are not available Copyright Innovative Technology GA339 4 DA3 User Manual Welcome te Found The Windows Found New Hardware Wizard m s will be displayed wD Select No not this time Click Next The wizard will then ask how you want to proceed Select Install from a list or specific location Advanced Click Next The Search and installation options screen will be displayed Select Include this le it tr in eer ih eh ea location in the search Click browse and locate the driver files The driver files are E stored within the installation directory of the VPS software which is C Program files VPS ITL VPS USB Driver by default Click Next Pete chee per mbh od adele mdan Hardware Tha pena for thas handeank ITL EV Sera hai not pasa ed window Logo teating bo weno iz compatiblitg with wind Tell sse Drag beste ai A warning will be displayed informin
15. aic Fl ened ab from of specie ocabon I 1 New ancel GA338 2 DA2 Installation Guide Please wait while the wizard semches The search window will again be displayed G j Cancel oe J Cael _ When the driver has been found a message Hardware Installation will be displayed informing you that the driver mem ae redit Nishaan has not passed Windows Logo testing dd haz nel parsed Windows Logo testing bo venly Es compa bil with Windows Tel me why this testing is importan Continuing your installation of this software may destabilize the ati F t Click on Continue Anyway othor immaciatoly ar in tho future Microsoft anong recommends that you stop this installation now and contact the hardware vendor for zoflware that har passed Windows Logo testing STOP Installation When the driver has successfully loaded you will see the following screen gue Click Finish Your DA2 is now ready for use Copyright Innovative Technology 04338 2 DA2 Installation Guide 11 4 VERIFYING INSTALLATION AND IDENTIFYING THE DA2 COM PORT 4 1 WINDOWS 98 98SE ME 1 Right Click on the My Computer icon then select Properties 2 Click on the Device Manager tab 3 Locate the Port Com amp LPT icon and click on the sign next to it 4 You should see a list of your PC s RS232 LPT Parallel and the DA2 port which will be labelled a
16. anual 6 3 STORING FILES ON THE In the dataset and firmware libraries select the files you wish to save to the DAS Holding the Shift or Ctrl keys while clicking the mouse can make multiple selections Right click the mouse and a menu will appear Select Add Selected To Device to add the file to the Connected Device window ready for download to the DA3 Innovative Technology Ltd Validator Programming System VPS Version 1 0 7 ITL VPS Hardware Detected Serial Number 1010 Free space 3 19 M bytes Firmware Version VPS 1001000000000 Export Setup File Import Setup File Loaded Datasets curry __ ruse betes B B B sveo 904 SISUNITED 5 10 20 124 GBPO2 1 5 10 20 1 5 10 20 GBPO3 ISUNITED KI 510 20 124 SISUNITED KI 510 20 510 20 GBPOS 903 SESUNITED 1 5 10 20 15 10 20 14 901 B 510 20 510 20 GBP21 ZISUNITED 5 10 20 124 GBPOS SISUNITED 5 10 12 27 EISUNITED 510 20 5 10 20 GBP28 Binary SSP Parallel Pulse ccTalk SSP Parallel Pulse MDB SSP Parallel Pulse Simple serial 2 SSP Parallel Pulse Simple serial SSP Parallel Pulse Update Device Summary Infomation Connected Device Library 1 Firmware Library Memory Card VPS Utiites On the Connected Device screen files not yet downloaded to the DA3 will be listed grey At
17. d locate the files you wish to add the datasets will be added to the library when you click the Open button Innovative Technology Ltd Validator Programming System VPS Version 1 0 7 5 10 20 50 510 20 50 EUR33 5 10 20 50 510 20 50 EURO2 906 10 20 50 100 5 10 20 5 EURO3 906 510 20 510 20 EUR10 905 0 0 5 0 0 10 2 00100 EURIS 901 10 20 50 10 1 2 410 45 904 510 20 124 2 904 1 5 10 20 1510 20 GBPO3 540 20 124 GBPO6 906 510 20 510 20 GBP09 903 1540 20 151020 14 901 SEUNITED 5 10 20 510 20 21 EI UNITED 510 20 510 20 2 SEUNITED 510 20 124 GBP09 SUNITED 5 10 12 27 EE 510 20 5 10 20 GBP28 510 20 510 20 29 The screen lists the currencies that are stored in your library with the note denominations number of pulses and the dataset code The revision code of the dataset is listed under the relevant product heading If the dataset for any product is not present then the version number will not be listed under the product heading To remove a file from the dataset library select the dataset to be removed and right click the mouse Select Removed Selected Datasets from the menu to remove the dataset for all validator models Alternatively select Remove For Validator and then the validator model to remove the file for individual validators Copyright Innovative Technology 04339 4 DA3 User Manual
18. g you rs ee eer eae that the driver has not passed Windows em ik Logo testing conlact the hardware vendo For sofbeare that har passed Widows Logo beating Click Continue Anyway TOP aon Windows will then install the necessary software tho Found Hardware Wr and po When the software has been installed you Will see this screen Click Finish J Found New Hardware x Your new hardware is installed and ready to use A Found New Hardware message will be displayed when the installation is complete This message will close automatically Copyright Innovative Technology 04339 4 DA3 User Manual 6 PROGRAMMING THE DA3 To use the DA3 you must first save the required datasets and firmware files to the DA3 s internal memory You can do this by either using the VPS Software this chapter or copying data from a pre programmed memory card see Chapter 7 7 To use the VPS software you must select the files you wish to store on the DA3 from the dataset library and the firmware library When first used the libraries will be empty you will need to add files as detailed below You will also need to add new files when re programming the DA3 with updated datasets or firmware 6 1 ADDING DATASETS TO THE DATASET LIBRARY Select the Dataset Library tab The screen will show all the dataset files that are currently stored in the library on your PC Click the Import button an
19. h tor a dive for my device rocommendedt e b ol dein device io hal con choosen pectic Lime Der oem On the following screen make sure that Specify a location is checked Locate Drive Fides Where do you vaart Windows to soach fos deves files Sanch tot diver Vor ron Following hardane dec e 42 Adopter The foe dub ble devient n da divai On your CONGU and in ary ol the optional search locobone that you pechy To start search click Nest Il you we searching ona floppy dick CDM dive anie the foppy deh or CD belos clicking Net Click on Next F da dives CDROM chives m stot A browser window will open to allow you to select the or driver s location In the location box type Ea Drive drivers where Drive represents your SUUS CD ROM drive letter usually D Click on Next Driver Files Search Mesults The want has finished searching for driver for yos hardware device A box will be displayed indicating that the aaa driver has been found Gp wren didien dbur inf Click on Next gt Copyright Innovative Technology 04338 2 DA2 Installation Guide When the driver has been successfully installed the following screen will be shown Click on Finish A second New Hardware Wizard will open Click on Next gt Make sure that Search for a sui
20. idator to the DAS via the supplied 16way ribbon cable Power must be applied to the DA3 via a separate 12V 1500mA DC power supply or from the host machine The functions described in this chapter will not be available if the is powered only by the USB cable 7 2 BNV MATCH DOWNLOAD This mode will update the connected BNV with the latest version of dataset and firmware currently programmed into the BNV All custom settings pulses special interface etc will remain the same Tagging files has no effect when the DA3 is used in this mode For this function to operate the versions of firmware and dataset stored within the DA3 memory must be later than that stored within the connected validator e Set the BNV to SSP mode as described in the BNV product manual Depending on the BNV model this will be either by setting the dipswitches as shown on the product label or by pressing a download reset button e Connect the BNV to the DA3 as described in chapter 7 1 and apply power either from the host machine or from a separate 12V power supply e Press the Mode Select button repeatedly until the blue BNV MATCH DOWNLOAD LED is illuminated The RUN button will pulse green to indicate that this function is available e Press the Centre RUN button e centre RUN button will change colour to pulsing blue and the Mode Indicator LEDs will rotate back and forth as communication is established and the current BNV settings are determined The DATA
21. ill revert to green and the MODE SELECT button will re light blue If there is no memory card in slot A or B or the memory card in slot A is blank the centre RUN button will pulse red and the blue COPY A gt B LED will flash a code as described in Appendix 1 e The Mode Indicator LED s will rotate in an anti clockwise direction while the entire contents of the memory card in slot A are copied to the memory card in slot B All files stored on the memory card in slot B will be overwritten e When the copy is complete the centre RUN button will pulse green Copyright Innovative Technology 04339 4 DAS User Manual APPENDIX 1 ERROR CODES The table below shows an explanation of the error codes displayed on the Mode Indicator LED s if the centre RUN button changes colour to red The flash code is shown by a long flash then a number of short flashes The number of short flashes indicates the cause of failure Number of flashes Cause of failure ee No validator connection found No valid download files found Download fai Memory card fai APPENDIX 2 SUPPORTED NOTE VALIDATORS The DAS will operate with the following ITL products NV7 programmed firmware 1 09 or later October 2003 NV8 programmed firmware 1 09 or later October 2003 NV9 NV10 BV20 BV50 BV100 Copyright Innovative Technology GA339 4 DA3 User Manual REVISION HISTORY INNOVATIVE TECHNOLGY LTD TITLE DA3 USER M
22. machine or from a separate 12V power supply e Press the Mode Select button repeatedly until the blue BNV OVERRIDE DOWNLOAD LED is illuminated The RUN button will pulse green to indicate that this function is available e Press the Centre RUN button e The centre RUN button will change colour to pulsing blue and the Mode Indicator LEDs will rotate back and forth as communication is established The DATA CONNECTION LED with flicker as data is transferred to and from the DAS If there are no files tagged for the connected BNV the centre RUN button will change colour to pulsing red and the blue BNV OVERRIDE DOWNLOAD LED will flash a code as described in Appendix 1 e The Mode Indicator LED s will rotate in an anti clockwise direction while the firmware is updated e Once the firmware update is complete the Mode Indicator LED s will rotate in a clockwise direction as the dataset is updated e When the firmware and dataset are successfully updated the centre RUN button will change to a pulsing green light and the BNV will reset e If necessary set the BNV dipswitches to their required positions before re connecting the BNV to the host machine 7 4 SET BNV TO CHECK MODE This function enables the validator to accept notes so that testing can take place outside of the host machine e Set the BNV to SSP mode as described in the BNV product manual Depending on the BNV model this will be either by setting the dipswitches as shown on the
23. n for your Operating System You will not need to insert the DA2 CD ROM for additional DA2s if you are using Windows XP Home or Professional Copyright Innovative Technology 04338 2 DJ 6 UNINSTALLING THE DA2 6 1 WINDOWS 98 98SE ME 1 Right Click on the My Computer icon then select Properties 2 Click on the Device Manager tab 3 Locate the Port Com amp LPT icon and click on the sign next to it 4 You should see a list of your PC s RS232 E PCMCIA adapters Ports COM amp LPT E Communications Port COM 1 LPT Parallel and the DA2 port which will be Jr TTL USB Serial Port CONS labeled as ITL USB Serial Port Com where A indicates the Com Port number the DA2 had b video and game controllers been installed to 5 Click on the DA2 it should now be highlighted 6 Click on the REMOVE button Follow the on screen instructions 6 2 WINDOWS 2000 1 Right click on the My Computer icon and then select Properties 2 Click on the Hardware tab then the Device Manager button 3 Locate the Port Com amp LPT icon and click on the sign next to it 4 You should see a list of your PC s RS232 Le a LPT Parallel and the DA2 port which will be Jr TTL USB Serial Port COME labeled as ITL USB Serial Port Com A where p indicates the Com Port number the DA2 had P d video and game contrallers been installed to 5 Click on the DA2 it should
24. now be highlighted 6 Right click on the DA2 and select uninstall Follow the on screen instructions Ports COM amp LPT d Communications Port COM 1 PCMCIA adapters 6 3 WINDOWS XP HOME AND PROFESSIONAL 1 Right click on the My Computer icon and then select Properties 2 Click on the Hardware tab then the Device E PCMCIA adapters Manager button Ports COM amp LPT 3 Locate the Port Com amp LPT icon and click D Communications Port COM 1 on the sign next to it 4 You should see a list of your PC s RS232 LPT Parallel and the DA2 port which will be labeled as ITL USB Serial Port Com where indicates the Com Port number the DA2 had been installed to 5 Right click on the DA2 and select uninstall Follow the on screen instructions 9 ud video and game controllers Copyright Innovative Technology 04338 2 JM FC HETTTIBCL IG REVISION HISTORY Projet Author MH Dae 10 12 2000 MSWORD2000 4 issue Release Date Modified By Comments 10 12 2003 Pre release development issue 5sue2 08 04 2007 Innovative Technology has a number of European and International Patents and Patents Pending protecting this product If you require further details please contact the factory Smiley and the ITL Logo are international registered trademarks and they are the property of Innovative Technology Limited Innovative Technology is not respon
25. ns INTELLIGENCE IM VALIDATION Bellis Technology INTELLIGENCE IN VALIDATION Copyright Innovative Technology EMAIL CONTACT BRAZIL suporte bellis technology com br CHINA support innovative technology co uk COLUMBIA support automated transactions net GERMANY support automated transactions de ENGLAND support innovative technology co uk SPAIN soporte automated transactions es UNITED STATES OF AMERICA supportusa bellis technology com REST OF THE WORLD sales innovative technology co uk GA151 DA1 Quick Start Guide 3 CONNECTING THE DA1 TO TEST A VALIDATOR The DA can be used to test the acceptance of a validator independently of a host machine This is useful for determining if the validator is faulty or if the host machine is inhibiting some of the channels The connections are made as shown in figure 1 The cable with a 15 way connector on one end and a 5 way connector on the other is used to connect the validator to the DA1 The cable with a 3 5mm jack plug and 2 banana plugs is used to supply power to the DA1 Connect 12 volts to the red banana plug and GND OV to the black plug When using the DA1 to test note acceptance it should not be connected to a PC Validator Figure 1 Connecting a DA1 to a validator for testing To test the validator insert the notes as normal if the note is accepted the channel the note was accepted on is displayed on the display lights on the validator NV2 and
26. ontinue to improve our product This document is intended for those who will e Program the DA3 e Program validators using the DA3 Innovative Technology Ltd has a policy of continual product improvement As a result the products supplied may vary from the specification described here The ITL Logo is an international registered trademark and is the property of Innovative Technology Limited Innovative Technology has a number of European and International Patents and Patents Pending protecting this product If you require further details please contact the factory Innovative Technology is not responsible for any loss harm or damage caused by the installation and use of this product This does not affect your local statutory rights If in doubt please contact Innovative Technology for details of any changes Kit Components The DA3 Kit comprises of the following DA3 Programming Unit USB A to USB B cable DA3 to ITL Note Validator Cable Support CD MAIN HEADQUARTERS Innovative Technology Ltd Derker Street Oldham England OL1 4EQ Tel 44 161 626 9999 Fax 44 161 620 2090 E mail support innovative technology co uk Web site www innovative technology co uk Copyright Innovative Technology GA339 4 DAS User Manual GROUP Technology INTELLIGENCE IN VALIDATION Automated Transactions INTELLIGENCE IM VALIDATION Bellis Technology INTELLIGENCE IN VALIDATION Copyright Innovative Technolog
27. product label or by pressing a download reset button e Connect the BNV to the DA3 as described in chapter 7 1 and apply power either from the host machine or from a separate 12V power supply e Press the Mode Select button repeatedly until the blue SET BNV TO CHECK MODE LED is illuminated The RUN button will pulse green to indicate that this function is available e Press the Centre RUN button e The centre RUN button will change colour to pulsing blue and the DATA CONNECTION LED with flash as data is transferred to and from the DAS If communications can not be established the centre RUN button will change colour to pulsing red and the blue SET BNV TO CHECK MODE LED will flash a code as described in Appendix 1 e When notes are inserted and accepted the Mode Indicator LED will switch off a number of times according to which channel the note has been credited For example if a note from channel 3 has been inserted the Mode Indicator LED will switch off and back on again 3 times Copyright Innovative Technology 04339 4 DA3 User Manual 7 5 SERIAL COMM MONITOR This function is not yet implemented The centre RUN button will not illuminate to indicate that this function is not available 7 6 COLLECT NOTE DATA This function is not yet implemented The centre RUN button will not illuminate to indicate that this function is not available 7 7 COPY A TO This function copies the contents of the memory card in slot A to
28. r details of any changes MAIN HEADQUARTERS Innovative Technology Ltd Derker Street Oldham England OL1 4EQ Tel 44 161 626 9999 Fax 44 161 620 2090 E mail support innovative technology co uk Web site www innovative technology co uk Copyright Innovative Technology 04338 2 2 Installation Guide GROUP Technology INTELLIGENCE IN VALIDATION Automated Transactions INTELLIGENCE IM VALIDATION Bellis Technology INTELLIGENCE IN VALIDATION Copyright Innovative Technology EMAIL CONTACT BRAZIL suporte bellis technology com br CHINA support innovative technology co uk COLOMBIA support automated transactions net GERMANY support automated transactions de ENGLAND support innovative technology co uk SPAIN soporte automated transactions es UNITED STATES OF AMERICA supportusa bellis technology com REST OF THE WORLD sales innovative technology co uk GA338 2 DA2 Installation Guide 2 SYSTEM REQUIREMENTS 2 1 OPERATING SYSTEMS To use the DA2 kit you must ensure that your PC s operating is one of the following Windows 98 Windows 98SE Windows 2000 Windows XP Home Windows XP Professional Windows Vista Windows 95 and Windows NT do not support USB devices However you can use a DA1 kit this will allow you to use any of the current Innovative Technology Bank Note Validator download tools NB Windows 98 98SE and 2000 are unsupported operating systems
29. s ITL USB Serial Port Com A where i Lessor indicates the Com Port number the DA2 had cound video and game controllers been installed to i PCMCIA adapters Ports COM amp LPT Communications Port 1 4 2 WINDOWS 2000 1 Right click on the My Computer icon and then select Properties 8 PCMCIA adapters 2 Click on the Hardware tab then the Device Ports COM amp LPT Manager button 3 Locate the Port Com amp LPT icon and click on the sign next to it 4 You should see a list of your PC s RS232 LPT Parallel and the DA2 port which will be 7 labelled as ITL USB Serial Port Com A where amp Sound videa and game controllers indicates the Com Port number the DA2 had been installed to do Communications Port COM 1 4 3 WINDOWS XP HOME AND PROFESSIONAL 1 Right click on the My Computer icon and then select Properties 2 Click on the Hardware tab then the Device Manager button 3 Locate the Port Com amp LPT icon and click on the sign next to it 4 You should see a list of your PC s RS232 LPT Parallel and the DA2 port which will be Lom labelled as ITL USB Serial Port Com where 9 Sound video and game controllers indicates the Com Port number the DA2 had been installed to B PCMCIA adapters Ports COM amp LPT do Communications Port 1 5 INSTALLING ADDITIONAL DA2S To install additional DA2s follow the instructions for installatio
30. s are imported you must click the Update Device button to save them to a DA3 Copyright Innovative Technology 04339 4 DAS3 User Manual 6 6 SUMMARY INFORMATION In the Connected Device window click on the Summary Information button to run a report of all the files stored on the connected DA3 6 7 MEMORY CARD FUNCTIONS Within the VPS software you can copy files to and from Memory card A Memory card B and the DA3 memory Also delete files from Memory card A Memory card B and the DA3 memory Innovative Technology Ltd Validator Programming System VPS Version 1 0 7 CARD A YPS MEMORY CARD B Fitted Fitted Fitted Memory size 8M byte Memory size 8M byte Memory size 8M byte Data Files 38 Data Files 38 Memory Used 4832K bytes Memory Used 4832K bytes NV 216 BIN NV 216 BIN NV8 215 BIN NVS 215 BIN 313 BIN NV10 313 BIN NV3 313 BIN 313 BIN NV 215 CCT NV 216 CCT NV8 216 CCT NV8 216 CCT NV3 319 CCT NV3 319 CCT 313 CCT NV10 313 CCT NV 216 MDB NV 216 MDB NV8 216 MDB NV8 216 MDB 319 MDB NV3 319 MDB N 10 319 MDB NY10 319 MDB NV 215 512 NV 215 SI2 215 512 216 512 319 512 313 512 319 512 319 512 216 510 NV 216 SIO NV8 216 SIO 216 510 NV3 313 510 NV3 313 510 v gt gt Erase Copy Card A to DAS Erase Copy DA3 to Card A Connected Device Ji Dataset Library 1 Firmware Library 1 5 Lltili
31. sible for any loss harm or damage caused by the installation and use of this product This does not affect your local statutory rights If in doubt please contact Innovative Technology for details of any changes In line with continued product development Innovative Technology Ltd reserves the right to change specifications without prior notice The data used in this document may be used as a guideline only Copyright Innovative Technology 04338 2 DA1 KIT QUICK START GUIDE Technology Automated Transactions Bellis Technology INTELLIGENCE IM VALIDATION T INTELLIGENCE IM VALIDATIDM OOOO TPES EE IN gt MTELLIGEMCE IN VALIDATION Copyright Innovative Technology GA151 DA1 Quick Start Guide 2 CONTENTS 1 Introduction 3 2 Kit components 3 3 Connecting the DA1 to test a validator 5 4 Connecting a validator to a PC using a DA1 6 5 Software installation 7 Copyright Innovative Technology GA151 2 esca 1 INTRODUCTION The DA41 Kit is designed to be used for the following e Connection of any ITL note validator to a PC to allow note data and firmware to be upgraded e Allow testing of a NV2 NV3 NV4 NV4X or NV5 note validators independently of the host machine 2 KIT COMPONENTS The DA1 Kit comprises of the following components DA1 adapter board Adapter to Validator cable for NV2 NV4 NV4X and NV5 Power Cable
32. table driver for my device is checked Click on Next gt A browser window will open to allow you to select the driver s location In the location box type Drive Ndrivers where Drive represents your CD ROM drive letter usually D Click on Next A box will be displayed indicating that the driver has been found Click on Next When the driver has been successfully installed the following screen will be shown Click on Finish Copyright Innovative Technology Completing the Found New Hardware Wizard TL USB high speed Send Converter Welcome to the Found New Hardware Wizard Install Hardware Device Drivers iver i a soltuare pogam that enables a hardware device to werk v an ope ian cyclen The warard complete the ratallaton ter the devor e USB Seal Post device dives is a solae progam that makes a hardware device work Windows diwe for your new device To locate dre let nd complete the installato click Nent What do yeu vant the wazad to Seach ice amp suitable driver ice my device recommended Disgkay a kst of the known divers for this device 19 that can choose a specific dw toned Hardware Wrst Locate Driver Files a verd V rahoves bo seaech los diner He CI wizard Xj invert the manalsetuer instalation dik rto the Give on selected and then cick OF Cancel Copy mans acturer s hom Ib Doveed Browne
33. tes NOTE New memory cards may need to be formatted To format cards disconnect the DA3 from USB host connector and power connector Insert the new card into memory card slot A and apply power either through the power connector or the host connector If the card is not formatted the centre button will light red and no further operation will be possible Remove and re apply the power the memory card will then be formatted Copyright Innovative Technology 04339 4 DAS User Manual 6 8 VPS UTILITIES Using the VPS Utilities screen you can update the operational firmware of your DA3 Innovative Technology Ltd Validator Programming System VPS Version 1 0 7 YPS Operational Firmware update utility Connected VPS Update VPS Firmware YPS Hardware connected Open VPS Firmware file Update VPS Firmware Serial Number 1010 Firmware Version P51001 000000000 Loaded VPS Firmware File 5 1001000000000 Connected Device Dataset Library Firmware Library Memory Card J Click the button to browse for the firmware file and then click the Update VPS Firmware The operational firmware will be updated DO NOT disconnect the DA3 while the firmware upgrade is taking place Doing so could permanently damage the DA3 Copyright Innovative Technology 04339 4 DAS User Manual 7 USING THE 7 1 CONNECTING A VALIDATOR TO THE DAS3 Connect the val
34. the RUN button will change colour from pulsing green to solid blue and the MODE SELECT button light will switch off e Press the RUN button again within seconds to confirm f the RUN button is not pressed a second time within 3 seconds the colour of the button will revert to green and the MODE SELECT button will re light blue If there is no memory card in slot A the centre RUN button will pulse red and the blue gt A LED will flash a code as described in Appendix 1 e The Mode Indicator LED s will rotate in an anti clockwise direction while the entire contents of the DA3 are copied to the memory card in slot A All files stored on the memory card will be overwritten e When the copy is complete the centre RUN button will pulse green Copyright Innovative Technology 04339 4 DA3 User Manual 7 9 COPY A TO B This function copies the contents of the memory card in slot A to the memory card in slot B files stored on the memory card in slot B will be overwritten Note that new memory cards may need formatting see chapter 6 7 for more details e Press the MODE SELECT button until the COPY A B LED is illuminated e Press the RUN button the RUN button will change colour from pulsing green to solid blue and the MODE SELECT button light will switch off e Press the RUN button again within seconds to confirm f the RUN button is not pressed a second time within 3 seconds the colour of the button w
35. the internal memory of the DAS All files stored in the memory will be overwritten Note that new memory cards may need formatting see chapter 6 7 for more details e Press the MODE SELECT button until the COPY A DA3 LED is illuminated e Press the RUN button the RUN button will change colour from pulsing green to solid blue and the MODE SELECT button light will switch off e Press the RUN button again within seconds to confirm Ifthe RUN button is not pressed a second time within seconds the colour of the button will revert to green and the MODE SELECT button will re light blue If there is no memory card in slot A or the memory card is blank the centre RUN button will pulse red and the blue COPY A DA3 LED will flash a code as described in Appendix 1 e Mode Indicator LED s will rotate an anti clockwise direction while the entire contents of the memory card in slot A are be copied to the internal memory of the DA3 All files stored in the memory will be overwritten e When the copy is complete the centre RUN button will pulse green 7 8 COPY TOA This function copies the contents of the internal memory of the DA3 to the memory card in slot A All files stored on the memory card will be overwritten Note that new memory cards may need formatting see chapter 6 7 for more details e Press the MODE SELECT button until the COPY DA3 A LED is illuminated e Press the RUN button
36. the validator will not be changed e Overwrite the stored software within a validator with pre selected tagged files using the BNV Override Download Function For example a validator programmed for UK notes with the Binary interface can be re programmed for Euro with the ccTalk interface e Test the functionality of the validator away from the host machine There are also two memory card slots to enable simple reprogramming of the DA3 away from a PC The memory cards used must be an Atmel Dataflash card part number ATA45DCBOOSD ITL Part Number 1C237 Data Connection LED RUN Button Mode Indicator LEDs Mode Select Figure 1 The Copyright Innovative Technology P GA339 4 DAS User Manual NOTE To install the software you will need administrator rights to your PC Insert the Support CD into your computers CD Drive The menu should appear automatically Double click Install VPS Software from the menu The Welcome to the VPS Setup Wizard will start Click Next The Select Installation Folder screen will be displayed Select the path where you wish to ui a install the software C Program Files VPS is the default path Tas yam reial Fa Petes or Pa king Click Next A Confirm Installation screen will See be displayed Click Next When the installation is complete you will see this screen Click Close Copyright Innovative
37. use Follow the onscreen instruction to complete the installation Instructions for configuring and using the software you have installed can by found in the online help for that software Copyright Innovative Technology z GA151 DA1 Quick Start Guide REVISION HISTORY Projest Author PD 47082000 26 Comments Issue Release Date Modified By 17 08 2000 PD Production releases Innovative Technology has a number of European and International Patents and Patents Pending protecting this product If you require further details please contact the factory Smiley and the ITL Logo are international registered trademarks and they are the property of Innovative Technology Limited Innovative Technology is not responsible for any loss harm or damage caused by the installation and use of this product This does not affect your local statutory rights If in doubt please contact Innovative Technology for details of any changes In line with continued product development Innovative Technology Ltd reserves the right to change specifications without prior notice The data used in this document may be used as a guideline only Copyright Innovative Technology GA151
38. y EMAIL CONTACT BRAZIL suporte bellis technology com br CHINA support innovative technology co uk COLUMBIA support automated transactions net GERMANY support automated transactions de UNITED KINGDOM support innovative technology co uk SPAIN soporte automated transactions es UNITED STATES OF AMERICA supportusa bellis technology com REST OF THE WORLD sales innovative technology co uk GA339 4 DA3 User Manual 2 POWER REQUIREMENTS When programming the DA3 using the VPS software power is taken from the USB bus no external power supply is required When programming validators or using the DA3 card copy functions power must be applied via the host machine or from a separate 12V DC 1500mA power supply Copyright Innovative Technology GA339 4 DA3 User Manual 3 GENERAL DESCRIPTION The DAS is a programming system designed to enable the programming of ITL Bank Note Validators in the field without the use of a PC see Appendix 2 for supported products Many dataset and firmware files for different validator models can be stored on the DA3 Once the DA3 has been programmed the user can e Update the existing software within a validator using the BNV Match Download Function For example a validator already programmed for UK notes can be updated with the latest available UK dataset automatically All custom settings will remain the same i e the number of pulses set and the special interface within
Download Pdf Manuals
Related Search