Product Instructions
Contents
1. appears on the LCD which indicates incorrect range and need to select again Remove the battery when the meter is to be stored for long periods of time to avoid battery leakage If the date and time automatically resume to default setting after power the meter on which indicates the battery power is low replace the meter s battery 9 Accessories User s manual Photo detector 9V battery Tripod Optional 660600 132. MAX MIN icon 4 Over range indication icon 6 Analog bar graph indication 8 LUX FC record 10 Auto power off icon 12 Lux Fc icon 14 Auto range icon 7 Operation Instruction 1 Power ON OFF Function press 0 key for one second the meter will be on keep pressing this key for approx 3 seconds the meter will be off 2 Date 8 Time Set keep pressing the AA key before power the meter on then power the meter on and release this key when the DATE icon and data flash enter into the Date amp Time Set mode the display will be YEAR MONTH DAY fig as below ur 00 00 00 When the YEAR data flashes continuously press Y u key to increase the value and press the key to decrease the value See fig as below Year un 88 88 88 j Press the second time the MONTH data will CL PR flash continuously then press In and Set to increase or decrease the value See fig as below Month np wr 88 88 88 Press Un the third time the DAY data will flash continuously then press and to increase or decrease the value See fig as below As Press the fourth time the TIME icon and HOUR data flash then press and 2 to increase or decrease the value See fig as below Hour 88 88 88 the fifth time the MINUTE data flash then Ay 2 4 press and to increase or decrease the value See fig as below 10 Minute 98 80 88 After finish the Date
3. User s Manual Professional Light Meter Please read this user s manual thoroughly before using this unit and keep it properly for your future reference Contents SAY at 2 Applieation ana ANNE aa 3 Features nn hy 3 Specification iia da 4 Meter Description e es s s 6 LCD Display Description 8 Operation Instruction 9 Notes skuos mm A 13 Accessorie sss sss A 13 1 ASafety Read the following safety information carefully before attempting to operate or service the meter Use the meter only as specified in this manual otherwise the protection provided by the meter may be impaired A Environment conditions O RHs90 Non Condensation Operating Temperature 20 C 60 O Storage Temperature 20 C 60 C A Maintenance O Repairs or servicing not covered in this manual should only be performed by qualified personnel Wipe the unit with a dry soft cloth Do not use abrasives or solvents on this instrument A Safety Symbol LE Comply with EMC 2 Application This Light Meter is designed to meet the measurement requirements of safety Engineers Health Industrial safety offices and light quality control in various environments like factory school construction etc 3 Features Measuring range OLux 400kLux OFc 40kFc Measurement repeatability Analog bar graph indication Real time and date di
4. amp Time set press PEAK key to save the data and exit this mode 3 Backlight e After turning the meter on momentarily press 4 key the backlit will be on off it will automatically turn off after approx 30 seconds of inactivity 4 Fc Lux Selection IN D Press the Un key to select Fc units or Lux units 5 Range selection Press key to select the range level there are four selectable levels 11 0 400 Lux 400 4k Lux 4k 40k Lux 40k 400k Lux AUTO range 0 400k Lux 6 MAX MIN In the measurement mode press non key one time MAX icon will appear on the LCD to view the current MAX reading press the button again MIN icon will appear to view the current MIN reading Press this key once more to exit the MAX MIN mode 7 Data Hold nw SA Press key one time HOLD icon will appear on the LCD which indicates the data is freezed To release the held reading press the key again 8 PEAK Press button one time PEAK icon will appear on the upper right of LCD the PEAK value will be displayed Press this key again to exit the PEAK mode 12 8 Notes 1 2 3 4 5 La When the low battery icon appears replace the meter s battery Check whether the photo detector is well connected with the photo detector socket before measurement When manual range is needed press LEVEL key to select the desired range if UNDER or OVER icon
5. splay High accuracy Data hold Meter corrected for spectral relative efficiency Automatically revise parameters for onstandard illumination Short rise and fall times Selectable measuring units Lux or Fc Meter automatically shuts down after approx 15 minutes of inactivity MAX MIN record Large LCD display Peak hold 4 level selectable measurement ranges Automatic measurement Low battery indication 4 Specifications Display 4 digits LCD display Measuring range 0 Lux 400k Lux OFc 40k Fc Spectral response CIE photopic CIE human eye response curve Over range indication LCD displays OL or LO Spectral accuracy CIE VA function f1 5690 f2 290 Accuracy 3 rdg 0 5 f s lt 10 000Lux 4 rdg 10dgts gt 10 000Lux Sampling rate 2 times per second Photo detector Silicon photo diode with spectral response filter Power supply One 9V battery 006P NEDA1604 or IEC6F22 Photo detector Lead Length approx 2 5m Dimension L W H 185 66 33 mm Weight 308g 5 Meter Description ER l sg ANS Photo detector Photo detector socket LCD display SET key Backlight ON OFF key Lux Fc selection key Range level selection key Power ON OFF key MAX MIN key HOLD key PEAK key Tripod nut Battery compartment 1 Low range indication icon 3 Peak icon 5 Range indication 7 Date 8 Time display 9 Date 8 Time icon 11 Low battery icon 13 Hold icon 6 LCD Display Description 2
Download Pdf Manuals
Related Search