USER'S MANUAL OF UNDERSTYLE
Contents
1. USER S MANUAL OF UNDERSTYLE COVERMATE If any malfunction occurs because of your wrong installation even the property is lost we do not undertake any responsibility Ask to read the manual carefully before installing This kind of the understyle covermates are for applications to spa especially having beautiful shapes They are easy to install and popularly used in families VIP sauna place rooms in luxury hotels etc Is Coupler 2 Upper Cover Support Arms 3s Screw 4 screw Cap 5 Washer 4 pieces per set 6 Bolt 4 pieces per set Bolt Cap 2 pieces per set 8 Side pivot Arms 9 Screw 6 pieces per sct 10 Nut 2 pieces per set 11 Bolt 8 pieces per set 12 Mounting Bracket 2 pieces per set 13 Plastis Sleeve Pipe 4 pieces per set 14 Sponge Sleeeve Pipe 4 pieces per set 15 Lower Cover Support Arms Installation Instructions 1 Fix the Mounting Brackets Fig 3 12 on the ground with the bolts Fig 3 11 with the bolts facing down the distance between the two brackets being decided according to size of your spa 2 Place the spa on the brackets Note Be sure to use the pivot hole closest to the back of the spa and it is about 6cm from the back of the Spa to the Spa Cover when erected on the Covermate 3 Position the Spa Covers in closed position on the Spa making sure that all four conners are properly positioned and square on the spa 4 Insert the long end of one of2. the two Upper Cover Support Arms Fig 3 2 into either of the two Couplers Fig 3 1 and tighten them with the screws then insert the coupler into the bag hole between the Spa Coverl and the Spa Cover2 see Fig 1 At the other end of the Coupler connect it to the other Upper Cover Support One not tightening them at their joint Note The Upper Support Arms is the longer of two Support Arms 5 Join the two Upper Support Arms with the two pivot Arms see Figg 6 Connect the pivot Arms Fig 3 8 to the Mounting Brackets with the bolts Fig 3 6 then tighten the Nuts Fig 3 10 7 Insert the Lower Cover Support Arms Fig 3 2 into the other Coupler then slide the lower Support Arms into the remaining end of the Pivot Arms see Fig 3 8 Raise the Spa Covel according to the arrow see Fig 1 and put it onthe Spa Cove2 Next rotate the Covermate according to the arrow see Fig 1 till the Lower Cover Support Arms lie on the ground see Fig 2 During this procedure according to the size of the Spa Covers adjust the position between the Spa and the fixed Mounting Brackets and the position among the Support Arms the Side Pivot Arms and the Coupler to rotate the covermates freely and be easy to lay the Lowere Cover Support Arms on the ground 9 Tighten two or three screws at the joints among the Support Arms the Side Pivot Arms ma the Coupler and do all screws Fig 3 9 between the Mounting Brackets and the Spa to prevent the Spa from mo
3. ving 10 Cover the screws and the bolts with the black plastic caps Caution 1 Don t permit children to use the Covermate unless they are closely supervised at all times 2 Don t use the Covermate under high wind conditions or injury from the spa cover being blown over and impacting the spa user can occur Accessories for the Understyle Covermate 1 Couplers 2 pieces per set Fig 3 1 2 Upper Cover Support Arms 2 pieces per set Fig 3 2 3 Side pivot Arms 2 pieces per set Fig 3 8 4 Lower Cover Support Arms 2 pieces per set Fig 3 15 5 Mounting Brackets 2 pieces per set Fig 3 12 6 Sponge Sleeve Pipes 4 pieces per set Fig 3 14 7 Plastic Sleeve Pipes 4 pieces per set Fig 3 13 8 Bolts M10 X75 2 pieces per set Fig 3 6 9 Bolt Caps plastic 2 pieces per set Fig 3 7 10 Nuts 2 pieces per set Fig 3 10 11 Washers 4 pieces per set Fig 3 5 12 Screws M5 24 pieces per set Fig 3 3 13 Screw Caps plastic 24 pieces per set Fig 3 4
Download Pdf Manuals
Related Search