Home
        USER MANUAL For MULTI RANGER LIFTING SEAT
         Contents
1.                          9  So                                      9            DIKE                                    10  5   Getting into the                              10  56 Getto out of the Nitin                                         10  6 Attendant FUSING    rhea ac              10                10    1                       1   6 4 Litting and general Salcty               11  7    OE 11  8 IMPAINITON ANCE                     12                                    12  8 2 Six Monthly                                                      12  9 Warranty           12  10 Transporting the wheelchalr                          cccece cece eee ee eee eens 12  1        13  Multi Ranger Lifting Seat User Manual v1 Page A of 13 vl    Authority  Quality Controller  Authorised by  J Adams January 06                Tendercare Ltd  Multi Ranger Lifting Seat User Manual    1  Who to contact    difficulty    Tendercare Ltd  PO Box 3091  Littlehampton      16 2WF  Tel  01903  726161 Fax  01903  734083  Email  info  tendercareltd com    2  Intended user    The Multi Ranger is intended for occupants with a weight limit of up to 65Kg who need to  access various heights  The Multi Ranger can be used at school or home  It will effortlessly go  from floor to above desk height at the touch of a button  Students are able to participate in all  lessons without needing carer assistance to adjust chair height  At home  the Multi Ranger  will allow access to dining tables  computer desks etc  T
2.                  ton    Tendercare  paeem       USER MANUAL    For    MULTI RANGER LIFTING SEAT    IMPORTANT    Please read these instructions carefully  Before using your lifting seat          Multi Ranger Lifting Seat User Manual v1  Authority  Quality Controller  uthori       vl    Authorised  J Adams January 06                        CONTROL       CASTOR  BRAKE                TENDERCARE  MULTI RANGER LIFTING SEAT    PUSH HANDLE                CONTROLLER    SEAT  MOUNTING  FRAME          Multi Ranger Lifting Seat User Manual v1  Authority  Quality Controller  Authorised by  J Adams    Page 2 of 13          vl       January 06          TENDERCARE MULTI RANGER  WITH  TENDERCARE MODULAR SEAT          Multi Ranger Lifting Seat User Manual v1 Page 3 of 13  Authority  Quality Controller          vl    Authorised       J Adams January 06          Tendercare Ltd  Multi Ranger Lifting Seat User Manual    CONTENTS          ITEM DESCRIPTION PAGE  1 Who to contact if you have                         onan 5  2 Intended TSOP                   5  3 WD ACKING                             a 5  4 Preparing for use and                                                              6                     ee ete NR 6          EE T eee 7                AEE EEE AEE EEE 7  4 4 Controller GonnectOns  15 cscadiads aveviiaev dew etelatnarcehiaeveteaveneins 8  5 Operating                                                   8                     Battery                            8  J EIMCreenCy SOP        
3.           January 06       Tendercare Ltd  Multi Ranger Lifting Seat User Manual    8  Maintenance    8 1 Routine maintenance  The user or their family can easily carry out the following tasks  No tools are required     1  Keep battery charged   2  Check brake operation  weekly    3  Check operation of the lifting and tilt mechanism  weekly      4  Clean frame when necessary  we suggest at least once a week      8 2 Six monthly maintenance    Someone who is a competent tradesman or repairer should only carry out this work  Ifa  major fault is found stop using the Multi Ranger until it has been corrected     1  Examine the frame for any damage  If frame is damaged DO NOT use the Multi Ranger  until it has been repaired     2  Examine all pivot points for any damage or excessive play  If there is excessive play in the  pivot points DO NOT use the Multi Ranger until it has been repaired     3  Examine brake  castor wheel assemblies for wear  damage and correct operation  If a brake  or castor does not operate properly DO NOT use the Multi Ranger until it has been  repaired  The brake and castor assemble will have to be replaced as a complete item   Instructions for doing this are given in the workshop manual  which is available from  Tendercare Ltd     For all other repairs refer to your issuing authority or Tendercare Ltd     9  Warranty    1  Tendercare undertakes to repair or replace free of charge  any parts or part found to be  defective due to manufacturer within a period 
4. ED POSITION     5  Always look well ahead so that you have plenty of time to avoid hazards     6       considerate to  and watch out for  other people who may stop or suddenly change  direction     6 2 Brakes    1  Always put the brakes on when getting into or out of the Multi Ranger and when leaving  the Multi Ranger unattended     6 3 Comfort  1  Always be considerate to the occupant    2  Before use make sure the occupant is comfortably and correctly seated and that any safety  straps of harnesses are correctly adjusted and used  Always ensure that both feet are on the  footrests and that clothing is tucked in and cannot catch on the mechanism     6 4 Lifting and general safety    1  The Multi Ranger is to be used by one person only  Never allow children to play on the  Multi Ranger or stand on the footrests or frame     2  Never try to lift the Multi Ranger when the user is sitting in it     3  The Multi Ranger is quite heavy  for your own safety and good practice never lift the  empty Multi Ranger on your own  Always use good lifting practice     7  Cleaning    1  Whenever the Multi Ranger gets dirty it should be cleaned using a damp cloth and then  dried thoroughly     2  For more stubborn stains wipe with a damp cloth using a mild solution of warm water and  soap     3  Never use furniture polish or spirit to clean any part of the Multi Ranger        Multi Ranger Lifting Seat User Manual v1 Page 11 of 13 vl    Authority  Quality Controller  Authorised by  J Adams      
5. Multi Ranger Lifting Seat User Manual    5 2 Emergency Stop  The emergency stop button is on the controller    BATTERY    Push it to stop all movement of the seat  Twist it to the         right and let go of the button to turn the controller back  on   See photo opposite    Push to Switch OFF  Twist to the Right  To Switch ON       l    5 3 Hand Control       Press to 3 2 Press to  Raise Seat        Lower Seat    Press to  Tilt Seat  Forwards    Press to  Tilt Seat    Backwards                  OE             59              cn Ld Lid ead  SEMEL ELE PETE EEE CEL PELE               The hand control 15 connected to the controller via a  flexible lead  which can be operated by either an  attendant or the user        The control has four buttons  The top two   Buttons control the raising and lowering of the seat   The bottom two buttons controls the angle of tilt of  the seat  To operate the controls simply press the  appropriate button   See photo opposite               Multi Ranger Lifting Seat User Manual v1 fl  Authority  Quality Controller Page 9 of 13  Authorised by  J Adams    vl             January 06       Tendercare Ltd  Multi Ranger Lifting Seat User Manual    5 4 Castor brake    The Multi Ranger is fitted with two brakes one on each rear castor wheel  To put the brakes  ON push the grey pedals down  To take brakes OFF  push the top of the grey pedals   See  photos below      Push Here  To Put  Brake OFF    Push Here  To Put  Brake ON       CASTOR BRAKE    5 5 Getting 
6. Ranger Lifting Seat User Manual v1 1 fl vl  Authority  Quality Controller Page 3 of 13  Authorised by  J Adams January 06                   
7. dams          Page 6 of 13       vl    January 06          Tendercare Ltd  Multi Ranger Lifting Seat User Manual    4 2 Seat Unit    Mounting  Holes    Slot for Seat  Armrest _    Fittings    Footrest  Locking  Screw    Slot for  Footrest       Fittings  SEAT MOUNTING FRAME    The seat unit will normally be fitted to the mounting frame before it 1  supplied  If this is the  case the user need not take any action     If the seat unit 1s supplied separately a competent person must fit it  They must follow the seat  manufacturers instructions when fitting and adjusting the seat unit     4 3 Fitting the battery    The battery sits on top of the controller  which is on the  push handle   See photo opposite   It is attached to its  mounting bracket by a catch at the top  To fit the battery   place it on top of the controller and lock into place at the  top by clicking the spring loaded catch on the battery over  the mounting bracket on the push handle            Spring  To remove the battery  squeeze the spring  Loaded  loaded catch and lift off the controller  Catch    Warning    The battery is quite heavy take 2 EN   care not to drop it          Multi Ranger Lifting Seat User Manual v1 f1 vl  Authority  Quality Controller Page 7 of 13  Authorised by  J Adams January 06                   Tendercare Ltd  Multi Ranger Lifting Seat User Manual    4 4 Controller Connections    Plug For  Seat Raising Ram  Plug For  Hand Control       Plug For  Seat Tilt Ram  Controller Connections    T
8. he controller is supplied with all connections made  Should any of the plugs become  detached they should be reconnected as shown in the photograph above     5  Operating Instructions    5 1 Charging the battery    The Multi Ranger is supplied with a wall mounted battery  charger complete with wall mounting bracket  The bracket  and charger should be firmly attached to a wall where there is  sufficient room to give 50 mm clearance to the side  above  and below the charger and battery  It should also be fitted  near to an electricity socket     To charge the battery  fit it to the charger by placing it on top  of the charger and locking into place at the top by clicking  the spring loaded catch on the battery over the charger   mounting bracket     Plug in the charger and switch on the supply  The green light  indicates the charger is connected to the mains  The yellow  BATTERY light indicates that the battery is properly connected and is   charging  The battery will take approximately 4 hours to  CHARGER ted       To remove the battery switch off the charger at the mains then squeeze the spring loaded  catch on top of the battery and lift the battery off the charger     Safety Tip    When the charger is not in use switch off the mains supply or pull the plug  out in order to prevent unintentional operation        Multi Ranger Lifting Seat User Manual v1 f1 vl  Authority  Quality Controller Page 8 of 13  Authorised       J Adams January 06                      Tendercare Ltd  
9. he slim line narrow base is narrow  enough to fit effortlessly through standard sized doorways     The Multi Ranger Lifting Seat is a highly versatile and robust powered high low lifting seat   which incorporates an independently powered operated Tilt in Space Facility  The seat will  extend    height from 27cm to 78cm and has a seat tilting facility of up to 28    The Multi  Ranger Base is manufactured from Mild Steel and then finished in a high gloss Black Paint     The Multi Ranger base is designed to be used with various Modular or off the Shelf Seating  Systems     3  Unpacking  The Multi Ranger may be delivered fully assembled ready for use  I this is the case you can    skip the following sections and go directly to section 5 on page 8     The Multi Ranger may also be supplied in packaging  In this case some assembly will be  required and you should read the whole manual     Warning the transit packaging is heavy so moving and unpacking must be  done with care  Observe all lifting and handling regulations     Remove the Multi ranger from the packaging and check that you have the following items       Oi   Multi Ranger Lifting Seat a                          EN      3    Push handle fixing bolts  nuts and washers   2 J J    4  Battery       5   Batterycharger oo o D e S  6       Mama oS o S i    If any items are damaged or missing please contact Tendercare   Preferably by fax 01903 734083 within 36 hours of delivery           Multi Ranger Lifting Seat User Manual v1 P f
10. into the lifting seat    1  Put the brakes on    2  Lower the seat to the lowest position    3  Lower yourself onto the seat using the armrests  if fitted  for support   4  Place your feet on the footrest  if fitted      5 6 Getting out of the lifting seat    1  Put the brakes on    2  Lower the seat to the lowest position    3  Place arms on armrests    4  Slowly push yourself up to a standing position     6  Attendant Pushing    6 1 Pushing    1  The Multi Ranger has good stability even when raised but it is designed for use on hard flat  floor surfaces  It MUST NOT be pushed on steep slopes or steps  It is easy to push but  care should be taken when pushing and it is advisable to have the seat set in a low position   Never force the Multi Ranger if it becomes stuck  this may cause the Multi Ranger tip   If the Multi Ranger gets jammed move it away from the obstruction        Multi Ranger Lifting Seat User Manual v1 f1 vl  Authority  Quality Controller Page 10 of 13  Authorised by  J Adams January 06                   Tendercare Ltd  Multi Ranger Lifting Seat User Manual    2  Always use two hands for pushing the Multi Ranger     3  For the comfort of the occupant always avoid pushing too fast or making sudden fast turns   Many occupants are liable to be affected by rough handling  which can cause loss of  confidence  discomfort or pain     4  DO NOT push the Multi Ranger up  down or across steep slopes  It can be pushed on  gentle slopes so long as the seat is in the LOWER
11. l vl  Authority  Quality Controller      5 of 13  Authorised by  J Adams January 06                   Tendercare Ltd    Multi Ranger Lifting Seat User Manual    After unpacking and checking you have all components and that they are in good condition     carefully dispose of the packaging at your local recycling centre     4  Preparing for use and operation    Warning    when assembling the Multi Ranger for use  ensure that you hold the frame    so that you avoid any danger of catching your fingers in moving parts     The multi ranger needs a minimum amount of assembly as follows       4 1 Push handle    The push handle 1  supplied with nuts  bolts and  washers to fasten it to the frame     Hold the push handle so that the battery    controller is facing towards the back of the frame  then insert the push handle into the socket in the  frame   See photo opposite         Fasten the push handle to the frame as follows       a  1  The push handle is supplied with two M8       Setscrews  Nyloc nuts and Washers     Frame    Socket Wen 2  Place a washer over    setscrew and screw it    into the back of the frame  Using a 13 mm  spanner tighten to 25Nm  Keeping the spanner on the bolt head to prevent it moving fit  the Nyloc nut onto the screw and tighten to 25Nm using a second 13 mm spanner   See  Sketch 1 below      PUSHHANDLE       WASHER         SET SCREW    THREADED HOLE    SKETCH 1       Multi Ranger Lifting Seat User Manual v1  Authority  Quality Controller  Authorised by  J A
12. of 12 months from the date of delivery     2  Tendercare Limited will not repair or replace free of charge any part or parts found to be  defective due to abuse  misuse or lack of correct maintenance     3  Equipment for warranty claims should be returned in a strong carton  There may be a  charge for collection  Contact customer service department on 01903 726161     10  Transporting    The Multi Ranger can be transported in the luggage area of a motor vehicle     The Multi Ranger MUST NOT be used as a vehicle seat        Multi Ranger Lifting Seat User Manual v1 12 of 1 vl  Authority  Quality Controller Page of 13  Authorised by  J Adams January 06                   Tendercare Ltd  Multi Ranger Lifting Seat User Manual    11  Repairs  1  Repairs  for all repairs contact your issuing authority     2  Major repairs  for all major repairs e g  bent or damaged frame  the equipment should be  returned to the factory  Contact Tendercare Ltd customer services on 01903 726161     3  An approved agent may carry out the following repairs and replacements  A workshop    manual is available to repairers     The Repairs are replacement of brake castors  front castors  operating rams  controller and  battery     Important Points  1  Do not reuse Nyloc nuts  Always replace with a new Nyloc nut   2  Always use Loctite thread locking compound Grade 241     3  Always use recommended components and parts available from Tendercare Ltd   4  Do not modify or repair the frame    NOTES       Multi 
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
    WEICON-Vernis-antifriction    PRO-SERIES MMIG140 Use and Care Manual  Bedienungsanleitung LD ECO Deutsch.cdr  P204 UG-web  QSPII with The NoisePro User Manual  USER MANUAL    Copyright © All rights reserved. 
   Failed to retrieve file