Installation & User Manual V2.022
Contents
1. is not part of a network i e If the Door Control has not been assigned an address Flush Mounting Finger Print Switch is mounted to pattress box using sec urity screws provided Both Security Caps are then clipped onto Finger Print Switch o attach Security Caps hook tabs into holes and push on To release Security Caps pusha screwdriver into slots on the side and pull forward 4 Wiring Diagrams Wiring Diagrams with External IP3 Function Wired 485 Network 1 Connections l l Always connect a varistor between the lock terminals 12V l Varisto 12V Linear Power supply 12V Sounder Follow Relay Door nd Exit Button Door Contact Lock Door Wiring Diagrams with Fire Alarm Override Wired 485 Network 1 Connections l BO A Om Always connect a varistor between the lock terminals 12V Linear Power supply Wiring Diagrams Sounder Door Exit Button Door Contact Fire Alarm W hen the fire alarm is activated 0V removed from IP3 the door will be opened Common OV from the Fire Alarm Panel and the OV from the Door Control to avoid any ground loop issues W Wiring Diagrams Wiring Diagrams with Interlock Connections Wired 485 Network 1 Connections l Always connect a varistor between the lock terminals 12V Linear Power supply 12V Sounder Door Exit Button Door Contact 1 0V Interlock IP from Interlock OP on 2n2. Other Access Control Products standalone products Also available is a range of fully functional standalone door controls for less complex door management This attractive design with modern aesthetics will complement and building ARGUS ACCESS 1 and 2 Door Digital Keypads Proximity Switch Biometric Switch Features Ve eae Operation Instructions gt Door monitoring Manager user i fire and intruder alarm interface Installation Diagrams ED Backlighting Tamper pee stant 5 amp relays 4 Indoor or outdoor use Wiring Diagrams ED Robust polycarbonate housing with stainless steel keys Mounts onto a standard electrical back box Enrolling Door Controls Finger Placement Wi Bio Simple Secure Access Installation amp User Manual v WwWwW argusaccess com Operation Instructions Technical Specs Power Suppl 12V DC onl Current consumption Current consumption with load max 100mA Relay Contact Ratino 5 Amps 240V ac Operating Temperature Moisture Resistance Dimensions Surface Mount Number of Users Restoring Factory Settings Description Restoring Factory Default Settings Example To Restore Factory Default Settings Present Finger to Confirm Note If programming code is lost Remove the Tamper W ing and hold down the 5 key during power up and enter the default programming code 6666 Note The Door Control can only be defaulted if it
3. d Door O O Interlock OP to Interlock IP on 2nd Door Wiring Diagrams with Alarm Panel Connections Wired 485 Network 1 Connections l l Always connect a varistor between the lock terminals 12V Varisto V4 12V Linear Power supply Wiring Diagrams ER 12V Sounder Only the Manager User can activate deactivate the Alarm Panel W hen the Alarm Panel is activated all other users are locked out Door Exit Button Door Contact O Arm Output N O Arm Alarm Input Common OV from the Intruder Alarm Panel and the OV from the Door Control to avoid any ground loop issues Click the Doors Icon on the left hand toolbar on the PC application On the Controller screen Click Allow Doors to J oin this Controller All Door Controls that don t have an address start to beep out the next Click Add New Door available address The Door is added to the Controller Hit any key on the beeping Door Control to assign this address Configure the required Door settings Door Timers Alarm Options W hen a Door Control is assigned an address all unassigned Door Door Options Timed Actions Inputs amp Outputs Controls will start to beep the next available address Click Save to transmit the changes to the Controller W hen all doors are assigned Click Secure Network Note Placing the mouse cursor over a door feature will display a description of the feature Assignin
4. g a Door Address on a Wired 485 Network Step Right Click on the Controller Icon amp select Manually Assign Addresses Follow Step 2 above to complete the process Correct Note Ensure that the finger is centered and placed flat to the surface and fully covers the sensor window Note Finger must remain on the sensor window until the door control acknowledges that the finger has been scanned by sounding a beep and turning off the red light This will take approximately 1 second Finger Placement FR Incorrect Finger Placement Incorrect Note Incorrect placement finger does not fully cover the sensor window The door control will not respond and the red light will not turn off if the sensor window is not fully covered by the finger
Download Pdf Manuals
Related Search