Y:\INTERNET\Yeni\Service Manual
Contents
1. gt a COMPRESSOR COMPRESSOR CONDENSER CAPILLARY R EVAPORATOR SUCTION TUBE2. VESTEL VESTEL REFRIGERATOR CUSTOMER SUPPORT WHITE GOODS ASSEMBLE amp DISASSEMBLE A Changing The Door Swing Direction to Right Hand 1 Lie down the appliance to the left side FIG 1 Figure 1 2 Loosen two screws which are fixing the bottom hinge FIG 2 Figure 2 3 Dismantle the bottom hinge FIG 3 1 and unscrew the leveling foot FIG 3 2 GS a e er A Figure 3 1 Figure 3 2 WHITE GOODS VESTEL REFRIGERATOR 4 Remove the door FIG 4 Figure 4 5 Unscrew the right pin of the top hinge 6 Screw the pin on the left hole of the FIG 5 top hinge FIG 6 Figure 5 VESTEL VESTEL REFRIGERATOR CUSTOMER SUPPORT WHITE GOODS ASSEMBLE amp DISASSAMBLE 7 Replace the top bushing and top bushing cap FIG 7 You can use the bushing cap that is put in the user manuel bag Remove the bottom bushing and assemble it to the left side FIG 7 7 1 Remove the door handle caps Unscrew the screws that are fixing the door handle Assemble door handle to the right side by doing the reverse operation FIG 7 Detail A Only for CLASSIC door design Figure 7 8 Assemble the door to the top hinge Reverse operation of item 4 9 Screw the bottom hinge to the left side Use holes signed by V for Vestel V Slimline S Softline F Coolline C and Classic K designed doors holes signed by B for Bonfanti B designed doors For door reversing operation use hole
3. s signed by R for right hand side and holes signed by L for left hand side opening FIG 8 Finally screw the leveling foot to right hand side Note Door design names for example Vestel are shown wW Figure 8 as abbreviations V for Vestel in Vestel model description B C RRR VESTEL VESTEL REFRIGERATOR CUSTOMER PRE GOODS ASSEMBLE amp DISASSAMBLE PURPORT Changing The Thermostat Remove the lamp cover and unscrew the fixing screw Remove the screw cap and unscrew the fixing screw Remove the thermostat box by pulling it and disconnecting the wire connector Remove the thermostat knob by pulling forward Loosen the nut fixing the thermostat Pull out the thermostat bulb from the housing Replace the thermostat with a new one and assemble the thermostat box following the steps backwards Thermostat Knob This knob is used to control the temperature of the freezer and refrigerator parts automatically It can be set to any value between 0 and 5 positions 0 position indicates that the thermostat is off The refrigerator is off on this setting By turning the knob between 1 and 5 you can increase or decrease the cooling degree The refrigerator is designed to get optimum performance when the thermostat knob is set between position 2 to 4 VESTEL VESTEL REFRIGERATOR CUSTOMER REFRIGERANT CYCLE DIAGRAM R EVAPORATOR CONDENSER SUCTION TUBE
Download Pdf Manuals
Related Search