TouchMe CIS for iPad & iPhone User Guide
Contents
1. D7 ON For the case of IRTrans type commands send exactly the same as configured in the macro Data Type Network IP Camera Single Adds an IP camera type giving you the chance to view a camera connected to your home network or internet available When you add this data type you must specify the path of the camera image for example being this http 190 220 3 108 1059 jpg 1 image jpg The camera will be displayed on the same TouchMe CIS is a product of Trikom Ingenier a http www trikom com ar domotica 5 screen when pressing on the row Data Type Network IP Camera Group Adds an IP camera type giving you the ability to display a group of cameras connected to your home network or on the internet When you add this type of data you must select the number of cameras and specify the path of the image of each of these cameras The cameras will be displayed in a new screen press on the line allowing you to zoom by double tap on the camera in question This data type is only available for the iPad version Edit Data Rows To edit a data row must press the Edit at the top right of the screen In edit mode you are given the possibility to position the rows as well as delete them To change any parameter own row hold the line for two seconds and access the setup screen for the selected object Choose default row icon When you edit or add a row of data and select the icon in the row you can choose between diffe2. TouchMe CIS for iPad amp iPhone p gt Trikom User Guide Copyright 2012 Trikom Ingenieria Published November 16 2012 Welcome This document will guide you through the basics of operating the TouchMe CIS For more information or technical assistance please contact our support team They are ready to answer your questions IN THIS DOCUMENT Initial Settings Insert Rows of Data Data Type Area Data Type PLCBUS Dimmer PLCBUS 2263 2264 Data Type PLCBUS Appliance PLCBUS 2267 2268 Data Type PLCBUS Curtain PLCBUS 3160 Data Type PLCBUS Scene Data Type PLCBUS IR PLCBUS 3011 Data Type PLCBUS All Lights Data Type PLCBUS All User Lights Data Type IRTrans Data Type Macro Data Type Network IP Camera Single Data Type Network IP Camera Group only available in the iPad version Edit data row Choose default row icon FAQ Support Revision Notes TouchMe CIS is a product of Trikom Ingenier a http www trikom com ar domotica 1 Initial Settings Before you start customizing your smart home you need to set the basics of the architecture of your home Please look at the settings of your device and select the application TouchMe CIS You must complete all fields for proper operation of your home automation system At first there are the general settings PLCBUS devices in which you select the type of connection of the Ethe
3. ata you should choose the Home and Unit for the device to be controlled Data Type PLCBUS Curtain PLCBUS 3160 Add an object of curtain motor giving you the ability to open and close the curtain as well as up and down it by steps When you add this type of data you should choose the Home and Unit for the curtain motor to be controlled Data Type PLCBUS Scene Adds a scene type giving you the ability to turn on and off the scene PLCBUS preconfigured in your home When you add this type of data you should choose the Home and Unit for the scene to command Data Type PLCBUS IR PLCBUS 3011 Adds an IR type giving you the ability to command multimedia device In principle you are prompted to select the Home for your multimedia module Because it allows a maximum of 32 commands 16 PLCBUS addresses it is recommended that when you schedule your module 3011 a letter from your Home for this particular equipment and to record commands consecutively For example if we decide that our 3011 equipment occupies the letter E will record the commands as follows e Command N 1 F1 ON e Command N 2 F1 OFF e Command N 3 F2 ON e Command N 4 F2 OFF e Command N 5 F3 ON e Command N 6 F3 OFF TouchMe CIS is a product of Trikom Ingenier a http www trikom com ar domotica 3 e Command N 31 F16 ON e Command N 32 F16 OFF This will ensure a complete agreement with the TouchMe CIS s
4. creen where you initially you should select the type of object to add to the first available field Object types available are e Area e PLCBUS Dimmer PLCBUS 2263 2264 e PLCBUS Appliance PLCBUS 2267 2268 e PLCBUS Curtain PLCBUS 3160 e PLCBUS Scene e PLCBUS IR PLCBUS 3011 e PLCBUS All Lights e PLCBUS All User Lights e I RTrans e Macro e Network IP Camera Single e Network IP Camera Group only available in the iPad version Depending on the type of object you select complete the fields and set the configuration TouchMe CIS is a product of Trikom Ingenier a http www trikom com ar domotica 2 Detailed below each of these data type The Name field indicates the general heading of the row the field Description is the subtitle of the very short while the Image is the icon row identifier Data Type Area Allows you to divide your home in different sectors in order to help a faster and more intuitive navigation within the application Data Type PLCBUS Dimmer PLCBUS 2263 2264 Add an object dimmable type giving you the ability to turn on and off the light as well as increase and reduce the brightness of it When you add this type of data you should choose the Home and Unit for the lamp to be controlled Data Type PLCBUS Appliance PLCBUS 2267 2268 Add an object of type appliance giving you the ability to turn it on and off When you add this type of d
5. e a macro to turn on three lights and close a curtain to turn on your projector to turn off the lights and turn on your Blu Ray to turn on your stereo close the curtains and turn on lights in a given sector etc Macros can be generated containing only PLCBUS type commands or commands only containing encased IRTrans type as well as combinations of both The only limitation is that you can send up to eight commands of any type for each macro generated When you add a macro first select the number of commands you want to send and then for each type of command choose between Message PLCBUS ON Message PLCBUS OFF and Message of IRTrans If you choose one of the first two types you are prompted the Home and Unit of the device to be controlled while for the latter must complete the fields for the Hostname Remote and CommandName of your IRTrans device Then enter the delay or lag time between sending commands in milliseconds Note that a delay time low you can have overlapping commands and not sent correctly Note that when generating the macro creates two buttons e Power On Button sends the commands as they were configured in the macro e Power Off Button if you have configured PLCBUS device send the command set contrary to the macro For example if the macro sends the commands C1 ON and D7 OFF to touch the Power On Button in this case pressing the button Power Off Button send the command C1 OFF and
6. oftware After the row has been generated for this type of data if you press on it will head a new screen empty You must add each of the commands previously configured To do this press the button at the top right of the screen which will open a configuration screen where you are asked a series of data to complete First select the number of commands that you want the new row to be added allowing up to eight commands per row For each command must specifically a name and an associated icon Following the criteria explained above the first command set of the first row direction send F1 ON the second F1 OFE the third F2 ON and so on until the eighth command to send the address F4 OFF Similarly the first command sent from the second row address F5 ON the second F5 OFE the third F6 ON and so on until the eighth command to send the address F8 OFF The maximum number of rows to add is four as in the latter the eighth command OFF F16 send the address The following screenshot highlights the detailed above a wi LE NM E Power On Power Off Channel Channel Volume Volume Guide Favorite Home Audio Source Pad Left Pad Ls Pad Up Pad Down Pause Play Stop Guide Favorite Audio Source Note that you can add fewer amounts of commands per row but always send PLCBUS direction depending on the position of the button shown in the screenshot Data Type All Lights Adds an object that gives you the ability to send command
7. omotica 7
8. rent icons in the gallery as well as an image gallery of photos from your iPad iPhone To do this click on the Pictures in the upper right of the screen in the gallery of icons to access the images from your device FAQ Q1 The commands are not sent correctly to my devices What should I do to fix it First verify that the configuration file has been downloaded To do this go to the Settings screen of your iPad or iPhone and verify that the value of the last field is set to YES Otherwise the command will not be sent to their PLCBUS devices or multimedia Second check that all devices are interconnected to the same Wi Fi for your iPad or iPhone Finally make sure you have properly configured each of your devices Q2 I can not download the configuration file If you have trouble downloading the configuration file smart home please contact the Trikom Ingenieria Support that soon we will contact you in order to solve the problem Support For any failure questions or suggestions about the software please contact our support team and we will promptly contact you Send us an email to info trikom com ar or contact our offices in Buenos Aires Argentina by calling 54 11 4721 9021 TouchMe CIS is a product of Trikom Ingenieria http www trikom com ar domotica 6 Revision Notes e 1 0 original version published on 16 November 2012 TouchMe CIS is a product of Trikom Ingenier a http www trikom com ar d
9. rnet Serie converter connected to your wireless network you can choose between TCP and UDP the hostname or IP address of the same as well as its port the housing UserCode in hexadecimal and if it is a system of three phase or single phase type In case your home has an IRTrans select the type of connection to them you can choose between TCP and UDP Finally you must download the configuration file in your home for a proper functioning of the software The last field called Configuration File Loaded tells you if you have downloaded the file and the system is ready to enjoy the smart home If the value of this row is NO the commands through the software will not be sent correctly To fix this you must activate the Load File and then enter the URL of our website 186 109 89 9 in the next field to get the file at issue Following this run the application and during startup it will try to download configuration data Once charging is complete exit the application and disable the Load Configuration File to not try to connect to the server each time the application starts You will notice that the Configuration File Loaded change its value to YES For any query fails or when downloading the configuration file please contact the technical support of Trikom Ingenier a emailing to info trikom com ar Insert Rows of Data To add a new data row must press the button at the top right of the screen This opens a new s
10. s All Lights On Power On Button All Lights Off Lights OFF Button and All Units OFF Units Off Button When you add this type of data you should choose the Home for the sector to be controlled TouchMe CIS is a product of Trikom Ingenier a http www trikom com ar domotica 4 Data Type All User Lights Adds an object that gives you the ability to send commands All User Lights On Power On Button All User Lights Off Lights OFF Button and All User Units OFF Units Off Button Data Type IRTrans Adds a IRTrans type giving you the ability to command the type IR multimedia device When you add this data type you must specify the hostname or IP address assigned to your device as well as the name of the remote to control After the row has been generated for this type of data if you press on it will head a new screen empty You must add the commands related to its remote To do this press the button at the top right of the screen which will open a configuration screen where you are asked a series of data to complete First select the number of commands that you want the new row to be added allowing up to eight commands per row For each command must specify to a name an associated icon and the name of the CommandName associated Data Type Macro Adds a macro type giving you the possibility to generate scenarios relating different device in your home For example you can creat
Download Pdf Manuals
Related Search