FOS 100 DYNAMIC user manual rel 1.2 eng.cdr
Contents
1. g Manual Rel 1 2 GB 4 The Lighting Company 5 T S Illuminazione srl ITALY Made in Italy http www dts lighting it 2 FOS 100 DYNAMIC Le informazioni contenute in questo documento sono state attentamente redatte e controllate Tuttavia non assunta alcuna responsabilit per eventuali inesattezze Tutti i diritti sono riservati e questo documento non pu essere copiato fotocopiato riprodotto per intero o in parte senza previo consenso scritto della D T S DTS si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche funzionali o di design a ciascun proprio prodotto D T S non assume alcuna responsabilit sull uso o sull applicazione dei prodotti o dei circuiti descritti The information contained in this publication has been carefully prepared and checked However no responsibility will be taken for any errors All rights are reserved and this document cannot be copied photocopied or reproduced in part or completely without prior written consent from D T S D T S reserves the right to make any aesthetic functional or design modifications to any of its products without prior notice D T S assumes no responsibility for the use or application of the products or circuits described herein Les informations contenues dans le pr sent manuel ont t r dig es et contr l es avec le plus grand soin Nous d clinons toutefois toute responsabilit en cas d ventuelles inexactitudes Tous droits r2. degrees 0255 __ Colour Selection pacs NEDA onn Move DAMA sanse range Mode Option Function Value degrees e DMX range Value 0255 o Efect L Parameter 21 FOS 100 DYNAMIC ps RPA DMX range Mode Option Function Value po Proportional Dimmer Effect 1 Parameter EFFECT 2 Value 192 207 200 Random Strobo 208 223 2155 0 Random Strobo Random Colour a 224 239 232 Pulse 240 255 247 RandomPick n DMX CHANNEL Parameter COLOUR 2 DMX range Mode Option Function Value 0255 Colour Selection DMX CHANNEL Parameter PARAM 2 DMX range Mode Option Function Value 0255 __ Efect L Parameter DMX CHANNEL Parameter LEVEL 2 Move LME range range Mode Option Function Value degrees bl e l 0 255 __ Proportional Dimmer Effect 2 22 FOS 100 DYNAMIC DMX DMX CHANNEL 8 Parameter COLOUR MACROS Move DMX range range Mode Option Function Value Rn ra 014 14 No Function Function S O o O O e aa 30 Macro 45589 TEE 60 74 Mero O Bo Macros A Mero OS oso Mero 7 n 120134 Macro 8 135 149 Maer9 150 164 Macro 10 165 179 Macro 1 180 194 Macro 12 195 209 Macro 13 210 225 Macro O_ 2262239 Maro 00 240255 Macro O DMX CHANNEL 9 Parameter FUNCTIONS Recall Create and Store the Custom white Move DMA range range Mod
3. Value 0255 po Proportional colour DMXCHANNEL 44 Parameter GREEN15 DMX range Mode Option Function Value 0255 o Proportional colour DMX CHANNEL 453 Parameter BLUE15 Value 0255 o Proportional colour 18 DMX PROTOCOL 13 CHANNELS MODE 1 SHUTTER 2 DIMMER 3 RED 4 GREEN 5 BLUE 6 EFFECT 1 7 COLOUR 1 8 PARAM 1 9 LEVEL1 10 EFFECT 2 11 COLOUR 2 12 PARAM 2 13 LEVEL 2 FOS 100 DYNAMIC Parameter SHUTTER 30119 12019 150 179 180 204 192 205 229 218 230 255 240 Black out Open Black out Strobe at variable speed from slow to fast 3400ms 20ms Pulse open at variable speed from slow to fast 43s 100ms Pulse close at variable speed from slow to fast 43s 100ms Random Strobe Master and RGB active Random Strobe Full Open DMX CHANNEL Parameter DIMMER DMX range Move Value range Mode Option Function een nn 0 255 DMX CHANNEL Proportional dimmer dimmer Parameter RED grenn Move DAME nanye range Mode Option Function Value ee grees 0 255 Proportionalcolour 19 FOS 100 DYNAMIC 9 CHANNELS MODE SHUTTER DIMMER RED GREEN BLUE WHITE Pre programmed whites at different color temperatures CTC COLOURS MACRO FUNCTIONS NN O U1 UN b Parameter SHUTTER DMX range Mode Option Function Value a 5 poo Black out 10 19 14 Open 2029 24 Black out 30 1
4. 611111 info dts lighting it www dts lighting it
5. ground to the DMX connector chassis The plug housing must be isolated Connect the mixer signal to the DMX IN projector plug and connect it to the next projector by connecting the DMX OUT plug on the first unit to the DMX IN plug of the second one In this way all the projectors are cascade connected CONTROLLER STANDARD DMX 512 5 1 la y 1 GND ER 2 DATA 4 a2 3 DATA 3 P S If the display showing the DMX address flashes then one of the following errors has occurred DMX signal not present DMX reception problem For Installations where long distance DMX cable connections are needed we suggest to use a DMX terminator The DMX terminator is a male XLR 3 5 pins connector with a 120 ohm resistor Between pin 2 and 3 The DMX terminator must be plugged into the last unit DMX out panel connector of the DMX line PLACE A 120 OHM RESISTOR BETWEEN PIN 2 AND 3 OF A MALE XRL CONNECTOR AND PLUG IT INTO THE DMX OUT PANEL CONNECTOR OF THE LAST UNIT CONNECTED TO THE DMX LINE PIN 3 PIN 2 The standard configuration of the FOS 100 DYNAMIC is with XLR 5 pins connectors 9 FOS 100 DYNAMIC DMX SIGNAL CONNECTION FOS 100 DYNAMIC IP65 The unit operates using a digital DMX 512 signal Connection between the controller and the unit or between units must be carried out using a two pair screened 0 5 mm Ensure that the conductors do not touch each other Do not connect the cable ground to the DM
6. serv s Ce document ne peut tre copi photocopi ou reproduit dans sa totalit ou partiellement sans le consentement pr alable de D T S D T S se r serve le droit d apporter toutes modifications et am liorations esth tiques fonctionnelles ou de design sans pr avis a chacun de ses produits D T S d cline toute responsabilit sur l utilisation ou sur l application des produits ou des circuits d crits Las informaciones contenidas en este documento han sido cuidadosamenteredactadas y controladas Con todo no se asume ninguna responsabilidad por eventuales inexactitudes Todos los derechos han sido reservados y este documento no puede ser copiado fotocopiado o reproducido total o parcialmente sin previa autorizaci nescrita de D T S D T S se reserva el derecho a aportar sin previo aviso cambios y modificaciones de car cter est tico funcional o de dise o a cada producto suyo D T S no se asume responsabilidad de ning n tipo sobre la utilizaci n o sobre la aplicaci n de los productos o de los circuitos descritos 3 FOS 100 DYNAMIC DESCRIPTION FOS 100 DINAMIC is a new compact LED bar with power supply on board designed for colouring large surfaces with a uniform projection either indoor and outdoor FOS 100 DINAMIC can be used for many applications such as professional for an ample range of special events e theatre and television for uniform background colours and cycloramas architectural for lighting buil
7. 19 Strobe at variable speed from slow to fast 3400ms 20ms 120 149 oo Pulse open at variable speed from slow to fast 43s 100ms 150 179 Dr Pulse close at variable speed from slow to fast 43s 100ms 180 204 192 oo Random Strobe Master and RGB active 205 229 218 Random Strobe Full Open 230 255 240 DMX CHANNEL Parameter DIMMER enn Move DAMA panye range Mode Option Function Value an A EE 0 255 Proportional dimmer _ AE Move DAMA panye range Mode Option Function Value AA 0 255 Proportionalcolour 20 FOS 100 DYNAMIC DMX CHANNEL ES Parameter GREEN EIA Move LAMA panye range Mode Option Function Value degrees 0255 o Proportional colour DMX CHANNEL Parameter BLUE ITA Move DMX range range Mode Option Function Value degrees 000 047 023 __ NOEFECT_ 048 003 056 pp Background _ 064 079 070 HystogramLeft 080 095 087 __ Hystogram Right 096 111 104 po Hystogram Multicolor Left 412 127 120 Hystogram Multicolor Right 128 143 136 ContinousShiftRight 144 159 12 Continous Shift Left 160 175 168 Wave Right 176 191 184 ave eft 192 207 200 Random Strobo 208 223 215 Random Strobo Random Colour a 224 239 232 Pulse 240 255 247 RandomPick n DMX CHANNEL Parameter COLOUR 1 Move range Mode Option Function
8. L MAXIMUM TEMPERATURE Max temperature measured by internal Thermal sensor IS EIC CELSIUS A Ss Down Un it ENTER LLL ENTER TEMPERATURE MEASURE UNIT Celsius Fahrenheit au FAHRENHEIT INIT ENTER CL NILO MENU Up Down SE Mm li ENTER NI 1 LI a UNIT SERIAL NUMBER EC IS MENU Up Down CO IL ENTER RESERVED MENU ANN IIISISII 15 FOS 100 DYNAMIC DMX PROTOCOL 3 CHANNELS MODE 1 RED 2 GREEN 3 BLUE DMX range Mode Option Function Value 0255 op Proportional colour SA DMX range Mode Option Function Value 0255 o Proportional colour n DMX range Mode Option Function Value 0255 Proportional colour 16 FOS 100 DYNAMIC DMX PROTOCOL 45 CHANNELS MODE Default 1 REDI 2 GREEN1 3 BLUE1 4 RED2 5 GREEN2 6 BLUE2 43 RED15 44 GREEN15 45 BLUE15 venn Move Value ee 0 255 Proportionalcolour a Move Value cs annan 0 255 Proportionalcolour Move PINES ranse range Mode Option Function Value Se 0 255 Proportionalcolour 17 FOS 100 DYNAMIC DMX CHANNEL ES Parameter RED2 DMX range Mode Option Function Value 0255 o Proportional colour DMX CHANNEL Parameter GREEN2 DMX range Mode Option Function Value 0255 Proportional colour DMX CHANNEL Ka Parameter BLUE2 DMX range Mode Option Function Value 02585 Proportional colour EI a LI E DMX CHANNEL Parameter RED15 DMX range Mode Option Function
9. Parameter GREEN2 DMX range Mode Option Function Value 2 0255 Proportional colour DMX CHANNEL EN Parameter BLUE2 DMX range Mode Option Function Value 2 0355 Proportional colour DMX CHANNEL mo A Parameter RED3 DMX range Mode Option Function Value 2 0255 Proportional colour DIE CHANNEL Parameter GREEN3 DMX range Mode Option Function Value 0255 Proportional colour DMX CHANNEL Parameter BLUE3 DMX range Mode Option Function Value 2 0355 Prroportional colour 25 NOTE 26 27 The information contained in this publication has been carefully prepared and checked However no responsibility will be taken for any errors All rights are reserved and this document cannot be copied photocopied or reproduced in part or completely without prior written consent from D T S D T S reserves the right to make any aesthetic functional or design modifications to any of its products without prior notice D T S assumes no responsibility for the use or application of the products or circuits described herein MADE IN ITALY C E The Lighting Company ISO 9001 2000 D T S quality system Is certified to the ISO 9001 2000 standard D T S Products are designed And manufactured at the D T S Plants in Italy 05171128 D T S Illuminazione s r l Via Fagnano Selve 10 12 14 47843 Misano Adriatico RN Italy Tel 39 0541 611131 Fax 39 0541
10. X connector chassis The plug housing must be isolated Connect the mixer signal to the DMX IN projector plug and connect it to the next projector by connecting the DMX OUT plug on the first unit to the DMX IN plug of the second one In this way all the projectors are cascade connected CONTROLLER STANDARD DMX 512 5 1 Pu 1 GND EX 2 DATA WE 2 3 DATA 3 P S If the display showing the DMX address flashes then one of the following errors has occurred DMX signal not present DMX reception problem For Installations where long distance DMX cable connections are needed we suggest to use a DMX terminator The DMX terminator is a male DMX cable connector with a 120 ohm resistor Between pin 2 and 3 The DMX terminator must be plugged into the DMX out panel connector of the last unit connected to the DMX line DMX MALE CABLE CONNECTOR GND DATA DATA 120 OHM PLACE A 120 OHM RESISTOR BETWEEN PIN 2 AND 3 OF AMALE DMX CONNECTOR AND PLUG IT INTO THE DMX OUT PANEL CONNECTOR OF THE LAST UNIT CONNECTED TO THE DMX LINE 10 FOS 100 DYNAMIC DMX ADDRESS FOS 100 DYNAMIC can be used in 5 different modes 3 DMX channels 9 DMX channels 11 DMX channels 13 DMX channels RGBE or 45 DMX channels default If you want to use the FOS 100 DYNAMIC in 3 channels mode select the 3 CH mode from the MODE menu and set the following addresses on the mixer Projector 1 A001 Projector 2 A004 If you want to select the n
11. ch model e Lenses set Medium flood available for each model e Lenses set Wide flood available for each model IMPORTANT SAFETY INFORMATION Fire prevention Never locate the fixture on any flammable surface Minimum distance from flammable materials 10 cm Replace any blown or damaged fuses only with those of identical value Prevention from electric shock High voltage is present inside the unit Unplug the unit prior to performing any operation which involves touching the inside of the unit This equipment must be grounded do not connect to non grounded supplies The use of a thermal magnetic circuit breaker is recommended for each FOS 100 DINAMIC unit Use only AC supplies 90 260V 50 60Hz The unit should never be located in position exposed to rain or in areas of extreme humidity A good air ventilation is essential for proper equipment work Safety The external surface of the unit may exeed 50 C never handle the unit until at least 5 minutes have elapsed since the unit was turned off Never install the unit in an enclosed area lacking sufficient air flow The ambient temperature should not exeed 40 C and should not be lower than 10 C UNIT DIMENSIONS Unit Dimensions LxWxH 990 x 100 x 78 mm Weight 6 5 Kg Packing Dimensions LxWxH 1060 x 160 x 200 mm Weight 7 5 Kg INPUT OUTPUT CONNECTIONS FOS 100 DYNAMIC IP20 FOS 100 DYNAMIC M12 LED output Female panel connector DMX IN OUT Pane
12. ding facades public and commercial spaces monuments etc All models are made on aluminium and steel offering high resistance to mechanical stress Protection rating can be IP65 outdoor or IP20 indoor FOS 100 DINAMIC light source is composed of 15 x 3W Full Colour LEDs which can independently generate 16 million colours Luminosity is 550 Lux at 3 m spot lenses colour temperature can be controlled linearly from 3200 K to 5500 K The 15 Full Colour LEDs can generate the same colour at the same time so that the illuminated object is not only uniformly lit but also projects no false shadows and different colours at the same time indipended control for each Full Colour LED in 45 channels MODE in order to create an infinity combination of colours Three dedicated lenses sets Spot Medium flood Wide floodl are available for each model offering different light beam projection angles Set up and connection of the units is fast and easy thanks to the dedicated on board power supply FOS 100 DINAMIC can be controlled via any DMX lighting console FOS 100 DINAMIC IP65 Spot Cod 03 DYNO01S F10 15 x 3W Full colour LEDs Spot lenses Length 100 cm FOS 100 DINAMIC IP65 Medium Cod 03 DYN0015 F25 15 x 3W Full colour LEDs Medium lenses Length 100 cm FOS 100 DINAMIC IP65 Wide Cod 03 DYN0015 F40 15 x 3W Full colour LEDs Wide lenses Length 100 cm FOS 100 DINAMIC IP20 Spot Cod 03 DYN0025 F10 15 x 3W Full colou
13. e Option Function Value degrees 0 79 Custom White Recall Enable CH 6 for Custom white Recall 80 160 Custom White Create Enable CH 6 for Custom white Creation 161 255 Custom White Store Store the Custom White created 23 FOS 100 DYNAMIC DMX PROTOCOL 11 CHANNELS MODE 1 SHUTTER 2 DIMMER 3 REDI 4 GREEN1 5 BLUE1 6 RED2 7 GREEN2 8 BLUE2 9 RED3 10 GREEN3 11 BLUE3 Parameter SHUTTER DMX range Mode Option Function Value a 5 poo Black out 10 19 Open 20 29 A Black out 30 119 Strobe at variable speed from slow to fast 3400ms 20ms 120 149 Pulse open at variable speed from slow to fast 43s 100ms 150 179 Le Pulse close at variable speed from slow to fast 43s 100ms 180 204 192 n Random Strobe Master and RGB active 205 229 218 Random Strobe Full Open 230 255 240 DMX CHANNEL Parameter DIMMER po Move DMX range range Mode Option Function Value mn ponn mn 0 255 Proportional dimmer _ grenn Move DINE manye range Mode Option Function Value n ie 0 255 Proportionalcolour EI Move DAD manye range Mode Option Function Value nn Ceres 0 255 Proportionalcolour 24 FOS 100 DYNAMIC DMX CHANNEL Parameter BLUE1 DMX range Mode Option Function Value 2 0255 Proportional colour DMX CHANNEL asus a Parameter RED2 DMX range Mode Option Function Value 2 0355 Proportional colour DMX CHANNEL
14. e activated MES ENTER Boost mode deactivated Whit BOOST active the LED s current is setted to 450mA 25 more gain These settings have priority on Master Dimmer levels for Red IS CA 2 a FIT MENU Up Down ENTER Up Down These settings have priority on Master Dimmer ENTER GREEN MAXIMUM VALUES This menu allow to select the max levels for Green IS CA 2 ENTER BLUE MAXIMUM VALUES This menu allow to select the max Up Down ENTER Default Disable LED s current from 350mA to 450 mA RS f 4000 Hz default SYNC RS f 2500 Hz This menu allow to adjust the PWM ENTER frequency value Hz in order to reduce flickering in the process of IS f 2000 Hz your camera recordings ENTER IS f 1500 Hz ENTER Up Down ENTER RSP f 1100 Hz ENTER IS f 1000 Hz ENTER RS f 900 Hz ENTER ENTER ENTER ENTER RED MAXIMUM VALUES Je IR E IR This menu allow to select the max a FIT MENU Up Down ENTER Up Down These settings have priority on Master Dimmer levels for Blue Pa 3 FOS 100 DYNAMIC TE Up Down ENTER Up Down SMOOTH VALUE This menu allow to select the value of the delay in millisecons for RGB and Dimmer channels reaction to DMX or Program variation OFF 25 ms delay Fast response ON 250 ms delay Slow response MENU ENTER Up Down Range OFF ON Default OFF OFF 25 ms Istant responce to DMX variation ON 250 ms Smooth response
15. ext projector just add 3 Projector 3 A007 kode A projector 6 A016 If you want to use the FOS 100 DYNAMIC in 9 channels mode select the 9 CH mode from the MODE menu and set the following addresses on the mixer Projector 1 A001 Projector 2 A010 If you want to select the next projector just add 9 Projector 3 A019 on A projector 6 A046 If you want to use the FOS 100 DYNAMIC in 45 channels mode select the 45 CH mode from the MODE menu and set the following addresses on the mixer Projector 1 A001 Projector 2 A046 If you want to select the next projector just add 45 Projector 3 A091 BR A projector 6 A226 Selelcting the DMX address 1 Press the UP DOWN key until you reach the required DMX address The numbers on the display will start to flash but the new DMX address hasn t yet been set 2 Press ENTER to confirm your selection The numbers on the display will stop flashing and the projector is now controlled by the new DMX address TIPS if you keep pushed the UP or DOWN keys the channels are calculated more quickly and you get a faster selection 11 FOS 100 DYNAMIC DISPLAY FUNCTIONS Ze a L 2 DFP Digital Function Panel DISPLAY FUNCTIONS The FOS 100 DYNAMIC display panel shows all the available functions Using these functions it is possible to change some of the parameters and add some functions Changing the D T S setting can vary the functions of the unit so that it d
16. l Connectors MADE Wi ru R Mains 90 260 V AC 50 60 Hz input Powercon Female panel connector M12 5 PINS LED input Male cable connector M12 5 PINS LED output Female panel connector XLR 5 pins Male Female CURRENT on ra kan w awna MAINS OUT _ Mains 90 260 V AC 50 60 Hz output Powercon Female panel connector MAX load 230 VAC 20 FOS 100 DYNAMIC 100 VAC 10 FOS 100 DYNAMIC LEDS CONNECTOR PINOUT 1 DMX DATA 2 GROUND 3 DMX DATA 4 24V DC 5 HEARTH 7 FOS 100 DYNAMIC INPUT OUTPUT CONNECTIONS FOS 100 DYNAMIC IP65 Mains 90 260 V Ac Mains 90 260 V Ac 50 60 Hz input cable 50 60 Hz output ILME 5 pins Female panel connector DMX IN OUT MAX load ILME 4 pins Female 230 V Ac 20 FOS 100 DYNAMIC PANE OEEO 100 V Ac 10 FOS 100 DYNAMIC i DMX IN OUT ILME 4 pins Female Panel Connectors MAINS OUTPUT FEMALE PANEL DMX IN OUT CONNEGIOR FEMALE PANEL L CONNECTOR N 2 3 DATA DATA M12 5PINSLEDinput M12 5 PINS LED output LEDS Male cable connector Female panel connector CONNECTOR PINOUT 1 DMX DATA 3 2 2 3 2 GROUND 3 DMX DATA 4 24V DC 4 i 1 1 i A 5 HEARTH 5 5 8 FOS 100 DYNAMIC DMX SIGNAL CONNECTION FOS 100 DYNAMIC IP20 The unit operates using a digital DMX 512 signal Connection between the controller and the unit or between units must be carried out using a two pair screened g 0 5 mm Ensure that the conductors do not touch each other Do not connect the cable
17. oes not respond to the DMX 512 signal used to control it Carefully follow the instructions below before carrying out any variations or selections NOTE the symbol IS shows which key has to be pushed to obtain the desired function Software version 1 10 IF IS IS J U ISS CH1 RED CH2 GREEN Up Down ENTER Up Down ICA FCHANNELS ENTER CH3 BLUE DMX MODE To select DMX mode 3 13 9 11 or 45 u B Up Down ENTER CH3 RED CH4 GREEN CH5 BLUE CH 6 WHITE CH7 CTC CH8 MACRO CH9 CUSTOM WHITE CH1 SHUTTER CH2 DIMMER ENTER CH3 RED CH4 GREEN CH5 BLUE C6 EFFECT1 CH7 COLOURI CH8 PARAMI CH9 LEVEL1 CH O FUNCTION2 Ch11 EFFECT2 CH12 PARAM2 CH13 LEVEL2 am e en La O mr 13 CHANNELS Up Down CH1 SHUTTER ES CH2 DIMMER CH3 RED BLOCK 1 CH4 GREEN BLOCK 1 CH5 BLUE BLOCK 1 CH6 RED BLOCK 2 CH7 GREEN BLOCK 2 CH8 BLUE BLOCK 2 CH9 RED BLOCK 3 CH10 GREEN BLOCK 3 CH11 BLUE BLOCK 3 11 CHANNELS Up Down Default DMX Mode 45 CH 45 CHANNELS ENTER Up Down MENU Je ENTER Up Down MACRO MACRO Function enable channel mapping macro rainbow effects STD default _ Yen m Li m Ta e a Ta NN gt T ENTER ENTER FOS 100 DYNAMIC Standard mode enabled Default Show Custom settings IS CA 2 MENU gt FIS Up Down ENTER Up Down BOOST DRIVING This menu allow to increase the Boost mod
18. r LEDs Spot lenses Length 100 cm FOS 100 DINAMIC IP20 Medium Cod 03 DYN002S F25 15 x 3W Full colour LEDs Medium lenses Length 100 cm FOS 100 DINAMIC IP20 Wide Cod 03 DYN0025 F40 15 x 3W Full colour LEDs Wide lenses Length 100 cm All models are also available in white colour LED technology 15 x 3W Full colour LEDs P5 16 million colours linear colour temperature 3200 K 5500 K 16 selectable types of White No infrared emission no ultraviolet emission LEDs average lifespan 100 000 hours Optical units 3 lenses sets available Spot Medium flood Wide flood Control Via any DMX lighting console Protection IP20 or IP65 protection level against the penetration of solids and liquids Construction FOS 100 DINAMIC is made on aluminium and steel Power supply Integrated power supply LED controller 4 FOS 100 DYNAMIC MAIN ELECTRICAL CHARACTERISTICS Input Voltage Range Vin 90 260 Vac Frequency 50 60 HZ Power Consumption Range 6 75 W Power Factor Pf 0 95 electronic PFC controller Efficiency 90 typical Output Power Output Range 45 channels output 15 X R G B 1 5 W per channel Output Current 350 mA 100 per channel 500mA 100 per channel in BOOST Mode Output Voltage Vout 24V Control Input Control Signal DMX 512 Dimming System Constant Current PWM Address Range DMX 512 channels addressable by display ACCESSORIES Lenses set Spot available for ea
19. to DMX variation ENTER Up Down IS IS RS I I MENU Up Down ENTER C OU W AUTOMATIC MODE Automatic demo game without DMX controller When FOS 100 DYNAMIC is set in AUTO mode the unit will generate a DMX packet that will be transmitted via DMX line to slave units max 32 slave units on the same DMX line The RED colour level GREEN colour level BLUE colour level DIMMER level slave units must me set to 45 DMX channels Mode and with DMX starting address 1 I ENTER Up Down Co01 Co12 12 different colours presets RGB and Dimmer value selectable by user Pr01 Pr08 8 programs with 9 scenes Scenes Wait time and Fade time RED colour level GREEN colour level BLUE colour level DIMMER level selectable by user OM IS IS SCENE number es LI ENTER Up Down ENTER Ig WAIT time ENTER IS FADE timel o ENTER a IS COLOUR setting for the ENTER Selected Scene O MO IS SCENE number 6 I LIS ENTER Up Down ENTER IS WAIT time ENTER IS FADE timel ENTER IS COLOUR setting for the ENTER Selected Scene IS IS IS ECC RESET to restore default MENU Up Down ENTER I LIL ENTER Settings tal O CANCEL exit without exit withou To restore default settings CMA La Saving MENU SOFTWARE Software version Up Down ai ENTER 14 FOS 100 DYNAMIC IT IS E Down ES Ss Down Je tu TEMPERATURE Unit temperature NAXE HIT Fi AA IS ye NAXE li IE IR Te Down 0570 0570 i
Download Pdf Manuals
Related Search