Editor II CA-32D User Guide
Contents
1. koiite ant CA 32D Professional Lighting Controller User Guide Please read these instructions carefully before use TABLE OF CONTENTS 1 Safety Instruction 2 Technical Specification 3 Overview 3 1 Front View 3 2 Rear View 4 Operation Guide 4 1 Program mode 4 2 Stand by mode 4 3 Stand Alone Mode 4 4 Setting Strobe 4 5 Setting COLOR 4 6 Setting DIMMER 4 7 Create a Scene 4 8 Create a Chase 4 9 Running Scenes 4 10 Insert a Scene 4 11 Overwrite a Scene 4 12 Copy a Scene 4 13 Copy a Chase 4 14 Delete a Scene 4 15 Delete a Chase 4 16 Clear Memory 4 17 Light Show 5 Fixture Cleaning 1 Safety Instruction Please read the user manual carefully as it includes important information regarding details of operation maintenance and technical data Keep this manual with the unit for future consultation WARNING Avoid any flammable liquids water or metal objects entering into the unit Should any liquid be spilled on the unit DISCONNECT the power supply to the unit immediately STOP using the unit immediately In the event of serious operation problems and contact your local dealer for servicing DO NOT open the unit there are no user serviceable parts inside NEVER try to repair the unit yourself Repairs by unqualified people could cause damage or faulty operation Contact your nearest dealer CAUTION This unit is NOT intended for home use After having removed the packaging check2. 5 Press the former selected button to delete a scene 3 Select the desired position 1 12 which you want to copy 4 16 Clear Memory O 4 Press the Copy button and the display will blink e STANDBY 5 Hold down SAVE and then select the desired position where you want to copy sae the chase into it 1 Press the STAND BY STAND ALONE for 3 seconds into Stand Alone mode 4 14 Delete a Scene DELETE 1 Enter Program mode 2 Press the MEMORY button and the display will blink you can view the scene 2 Hold down the MEMORY button and the display will blink 3 Press STAND BY button all memory will be deleted one by one 3 Select the scene 1 12 that you want to delete 4 17 Light Show LIGHT SHOW 1 Press LIGHT SHOW button The LIGHT SHOW LED will light up indicating light show mode is active 4 Hold down CANCEL and the display will blink 5 Press the former selected button to delete a scene 2 Press AUTO SOUND to activate Auto or Sound mode The LEDs indicate which mode is activated 3 Press the button 1 12 to run a desired lighting show 4 When in Auto mode you can set the wait time by using the sliders When these settings will be kept when next time you run the same light show 5 When in Auto mode Sound mode activation the Light show will be triggered by music however you can still set the fade time of the light show 5 Fixture Cleaning The cleaning
3. that the unit is NOT damaged in any way If in doubt DON T use it and contact an authorized dealer Packaging material plastic bags polystyrene foam nails etc MUST NOT be left within children s reach as it can be dangerous This unit must only be operated by adults DO NOT allow children to tamper or play with it NEVER use the unit under the following conditions In places subject to excessive humidity In places subject to vibrations In places with a temperature of over 45C 113 F or less than 2C 35 6 F Protect the unit from excessive dryness or humidity ideal conditions are between 35 and 80 Do not dismantle or modify the unit 2 Technical Specification Power supply AC 120v 60Hz 230v 50Hz DC 9 12V 300mA Stand Alone 5 pin male connector Midi in To receive MIDI data input Sound DMX IN Microphone Earphone DMX out Two connectors sends DMX signals to DMX fixtures use 3 pin XLR plug cable to link the fixture together Weight 2 4 kg Dimension 483mm x 134mm x 73mm o ERRER op ee eee 134 ago eee ooo eeeod 3 Overview 3 1 Front View i 16 17 19 20 1 Fixture 1 8 2 Hold color 3 Hold 4 Chase 5 Spectrum mix 6 Chase Slider 7 Spectrum mix Slider 8 Speed Slider 9 Fade Slider 10 Dimmer Slider 11 Chase 12 Copy 13 Memory Delete 14 Cancel 6 7 8 9 10 12 13 14 15 16 21 22 23 To select 1 8 fixtures Red Orange Yellow Green
4. Cyan Blue Purple magenta White Nine colors button Press the button for select color on Red Orange Yellow Green Cyan Blue Purple Magenta White To select 0 12 chase Press the button for select 32 spectrum mix colors form Spectrum Mix slider To choose chase patterns on Standard chase Bright chase Mood chase spectrum random chase spectrum sequence chase Dynamic chase Red Green Blue Green Red Blue Blue Red Yellow Blue Red Green Yellow Green Use to control 32 spectrum mix color Use to adjust chase speed within the range of 0 1 second to 2 5 seconds Use to adjust fade time Fade time is amount of time it take for one color to fade in or fade out To set the dimmer intensity To select 1 12 chase Copy a Scene Copy a chase To edit exist scenes or delete a chase To delete a scene 4 15 Save Insert Overwrite 16 Light show 17 Mode 18 Full on 19 Stand by Stand alone 20 Fog machine 21 Strobe 22 Speed Slider 23 Master Slider 3 2 Rear View 1 Power 2 DC Input 3 FOG machine 4 Strobe 5 Midi in 6 DMX out Fog machine diagram To set Save Insert Overwrite three modes To run the Light Show To set Auto Sound two modes All lighting effect at once To set Stand by Stand alone two modes To set activate Fog Machine Ready two modes To activate Non DMX Strobe Hold on the Strobe button and press button 1 12 separately to change the strobe speed To s
5. Press the CHASE 1 12 to store your desired scene The scene is saved into the selected button 5 Repeat steps 2 amp 3 as many times as you want until the controller s memory is full The SAVE LED will blink when the memory is full 6 Achase The controller can store up to 500 scenes 4 Press the OVERWRITE button and the display will blink 5 Hold down the SAVE button and then press former selected button 1 12 to overwrite a scene 4 12 Copy a Scene 4 9 Running Scenes DELMIS 1 Enter Program mode MEMORY DELETE 2 Press the MEMORY button and the display will blink you can view the scene 1 Enter Program mode fincas one by one 2 Press MEMORY button and the display will blink or 3 Select the desired position 1 12 which you want to copy 3 Press the CHASE 1 12 button and the display will blink you can view the scene one by one eae 4 15 Delete a Chase MEMORY EO 1 Enter Program mode 4 P h he displ ill blink er AEA a a a a Aaa 2 Press the MEMORY button and the display will blink you can view the scene o 5 Hold down SAVE and then select the desired position which you want to copy one by one Q the chase into it 4 13 Copy a Chase CHASE1 12 3 Select the scene 0 12 that you want to delete MEMORY ey 1 Enter Program mode 2 Press the MEMORY button and the display will blink you can view the scene one by one 4 Hold down CANCEL and the display will blink
6. et chase speed wait time between scenes within the range of 0 1 second to 5 minutes when running light shows The fade time of scenes will be always completed Speed slider decides the wait time interval time between scenes To set the dimmer intensity oes Turns On Off the power DC 9 12V 300mA min 5 pin din socket for connecting DC Fog Machine Trigger non DMxX strobe Signal 12V DC To receive MIDI data input Two connectors sends DMX signals to DMX fixtures use 3 pin XLR plug cable to link the fixture together 4 Operation Guide S STAND BY 2 STAND ALONE STANDBY _ 4 STAND ALONE STANDBY 3 STAND ALONE STROBE HOLD COLOR 4 1 Program mode When power is turned on the controller enters Programming mode automatically The LED above this button lights off indicating Program mode in active 4 2 Stand by mode Press the STAND BY button the LED above this button lights up indicating STAND BY in active 4 3 Stand Alone Mode Hold on the STAND BY STAND ALONE for 3 seconds the LED above this button will blink indicating Stand Alone mode in active 4 4 Setting Strobe 1 Select the fixtures you want to control 2 Press STROBE button and the display will blink 4 5 Setting COLOR 1 Select the fixtures you want to control 2 Press HOLD button and the display will blink 3 To set HOLD COLOR button you can view the Red Orange Yellow Green Cyan Blue Purp
7. le Magenta White nine colors SPECTRUM MIX a DIMMER 4 Press the SPECTRUM MIX button 5 To set SPECTRUM MIX you can view the 32 different mix colors 6 To set DIMMER and hold color or spectrum mix intensity 4 6 Setting DIMMER 1 Select the fixtures you want to control 2 Press the Chase button 3 Select a dimmer value with 1 12 buttons 4 You can set the fade and chase speed by using the sliders 4 10 Insert a Scene ore 1 Enter Program mode 5 You can set the Dimmer and chase intensity by using the sliders 2 Press MEMORY button and the display will blink you can view the scene one by one 3 Create a new scene 4 7 Create a Scene 4 Press INSERT button and the display will blink you can view the scene one by 1 Enter Program mode one 2 Select the fixtures 1 8 you want to control 3 To select hold color or chase or spectrum 4 Press SAVE button and the display will blink 7 5 Press the desired position 1 12 you selected again to insert the new scene 5 Press the CHASE 1 12 to store your desired scene 4 11 Overwrite a Scene MEMORY nmaa 1 Enter Program mode 4 8 Create a Chase a 2 Press the MEMORY button and the display will blink you can view the scene 1 Enter Program mode one by one 2 Select the fixtures 0 8 you want to control 3 Press SAVE button and the display will blink citar 3 Create a desired scene 4
8. of internal and external optical lenses or mirror must be carried out periodically to optimize light output Cleaning frequency depends on the environment in which the fixture operates damp smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit s optics Clean with soft cloth using normal glass cleaning fluid Always dry the parts carefully Clean external optics at least every 20 days and internal optics at least every 30 days Innovation Quality Performance 12 13
Download Pdf Manuals
Related Search