Home

KODAK i55 and i65 Scanners, User's Guide, A-61527

1. n a r 36 A 61527 May 2006 When Adaptive Thresholding is selected Contrast values may range from 1 to 100 ca dthresteldingus ATP ATP enabled disabled Fixed Processing used for black and white and other high contrast documents A single level is set to determine the black and white transition The threshold is programmable over the entire density range Fixed thresholding sets Contrast to 0 If Fixed Processing is selected Contrast is not available 64 Level Bayer Dither 64 Level 45 Degree Clustered Dot Screen and 64 Level Dispersed Dot Screen represent alternative screening options to emulate a grayscale image Noise Filter occasionally small dots or specks appear in the background of a scanned image These specks increase file compression size and usually contain no image information Using the Noise Filter on documents containing very fine detail e g the dot on an i in 4 point type may cause information to be lost It is ie that you do not use Noise Filter when scanning documents with text smaller than point type Noise Filter can be used with bi tonal images only and is front rear independent Choose none Lone Pixel or Majority Rule Lone Pixel reduces random noise on bi tonal images by converting a single black pixel surrounded by white to white or by converting a single white pixel surrounded by black
2. Camera settings area The selections in the Camera area list the available sides front and back of an image where you can define individual image processing values When starting the configuration process use the steps below as a guide 1 Check the images you wish to capture Enable camera settings 2 Select the order to transfer the images Color First Binary First 3 Configure each image by highlighting it Configure Enable camera settings select the desired checkbox to enable the Front Color Front Binary Back Color or Back Binary settings as desired This indicates the images you wish to capture and transfer to the host PC It is possible to capture only rear images You can enable your selection by putting a checkmark in the desired box Color First Binary First define the transfer order by selecting the Color First or Binary First radio button This determines which image is transferred to the host PC first when using simultaneous output scanning For example if you are scanning front color and front binary and you select Binary First the scanner will return the front binary image then the front color image Configure highlight the image you want to setup As you select the image other options will become available on the More Scanner Settings dialog box The availability of these options is dependent upon the selection you make A 61527 May 2006 61 Convert Color to Grayscale this option is
3. Power system This product is also designed for Norwegian IT power system with y connection phase to phase voltage 230V A 61527 May 2006 5 2 Getting Started What s in the box Before you begin open the box and check the contents e Kodak i55 or i65 Scanner with input tray and flatbed cover Output tray e Feed module e USB 2 0 cable Power supply Power cord bundle s Welcome Folio which includes Bundled installation and application CD s Registration sheets Printed User s Guide English Quick Tips Guide Quick Installation Guide Service Contact sheets Miscellaneous flyers 6 A 61527 May 2006 System requirements Following is the recommended system configurations to run Kodak i55 and i65 Scanners Optimum requirements to match scanner capabilities e Intel Pentium IV 2 5 GHz processor 512 MB RAM for scanning documents no longer than 35 56 cm 14 in in length in color grayscale or bi tonal at 400 dpi 2 GB RAM for scanning documents no longer than 86 36 cm 34 in in length in color grayscale or bi tonal at 400 dpi 2 GB RAM for scanning documents no longer than 35 56 cm 14 in in length in color grayscale or bi tonal at 600 dpi 3 GB RAM for scanning documents no longer than 86 36 cm 34 in in length in grayscale or bi tonal at 600 dpi e USB port 2 0 best or SCSI II e Windows 2000 Professional or Windows XP Professional Home e 15 MB free hard disk spac
4. 0 0 0 0 cee eee 15 Connecting the power cord to the scanner 0005 15 Set up the input and output trays llle 16 Unlocking the scanner n nananana naaa 16 Turning on the scanner and finalizing Kodak Driver Software ins ala GES RE N DE N ale aces ee a args iced ced as 17 Installing application software 0 0 0 0 cee eee 17 scanner components 0 00 eee ee eens 18 FONE VIEW MC 18 Under the flatbed ss EER RES RES Bee EDS DR RD 19 ADF MSIJE VIBWLs rs BA ek RO ard eed RE dor CR af aie P a 19 Back VIEW 3 Ee be Soe uae EDE ee EED Ea a paa s 20 Indi ator OMIE on ni se oi eb ne De Ed oe be Bh wk Ga 20 3 USING the Scanner iis acd ex ee hee EE AE etch is 21 Turning the scanner on and off llle 21 Adjusting the input tray 2 eens 21 Installing and adjusting the output tray 0 0 00 00008 23 Lifting the flatbed cover SES SE SE ees 23 Start and Stop SCaNNING sc RE REDE RE Sos ER dox RE DR pres 23 Document preparation 0 ES EE SE EE ee es 24 scanning your documents SS SE SS SE ee eee 25 Verifying your scanner installation 0 0 000 SE SS es ee ee 26 Viewing test imageS 2 SEE EE ESE eens 29 Application software 0 0 0 cee eee 29 A 61527 May 2005 i 4 Image Processing mea oa kk SE eee cnet oh kal eee d 30 OVEIVIEW 4 ow Sak aic x da oe eb b dee RAE PEA GAR As 30 COMMON terris au son aon ae o RON C
5. Shipping switch 3 Place the scanner back in its normal position 16 A 61527 May 2006 Turning the scanner on When the USB and or SCSI cable and power connections have been finalizing Kodak Driver made and the Kodak Software Drivers have been properly installed Software installation the installation will be complete when the PC and the scanner have been powered up in the proper sequence 1 Turn off the host PC 2 Use the power switch on the back of the scanner to turn the scanner on I When you turn on the scanner the scanner goes through a series of self tests the green LED indicator will flash When it is finished and ready to scan the indicator will stop flashing and stay lit If the scanner does not pass the self test refer to Chapter 6 Troubleshooting 3 Turn on the host PC The following screens are based on Windows 2000 However depending on the computer operating system you are using these screens may be different Your operating software will now auto detect the scanner Found New Hardware Kodak Scanner i65 4 To test the scanner refer to the section entitled Verifying your scanner installation in Chapter 3 If the driver installation was unsuccessful see the section entitled Scanner not working in Chapter 6 Troubleshooting Installing application The Kodak Scan Validation Tool is installed by default when installing software the Kodak Driver Software Refer the
6. defines the primary measurement system Pixels Inches and Centimeters are available Auto Set when enabled will automatically set the maximum length value to 50 inch 1 27 cm greater than the length of the currently selected page size Stop scanner on Multi Feed when enabled the scanner will stop when a multi feed is encountered Sound Alarm on Multi Feed when enabled the scanner will alert you with the sound you selected when a multi feed is encountered Sound select this option to choose the sound you would like your PC to make to alert you of a multi fed document To choose a sound 1 Click on the Sound button to display the Open dialog box 2 Choose the desired wav file 3 Click Open on the dialog box and the sound will be saved A 61527 May 2006 65 Energy Saving features of Energy Star allows you to set the amount of time the scanner will the scanner remain inactive before the scanner goes into an idle state sleep mode Choices are 0 to 60 minutes Transport timeout This feature allows you to set a transport timeout value This value is the amount of time the scanner will wait after the last document enters the transport before the transport timeout action is taken You can specify a time delay setting from 1 to 300 seconds The default is 10 seconds Blank image detection Use the slider bar to specify the image size KB below which an image is determined to be blank Images with sizes less
7. 21 6 x 29 7 cm 8 5 x 11 69 in Paper Types Bond Laser Inkjet Offset NOTE Chemically coated papers may cause excessive wear swelling of the rollers Paper inks All inks on the paper must be dry before scanning is started This includes Standard offset printing Inkjet printer Thermal transfer Handwriting inks Correction Fluids Liquid Paper Tipp Ex amp Wite out and other similar correction fluids 24 A 61527 May 2006 Scanning your Using the ADF documents Standard paper size documents should feed easily through the scanner e Lift the balance wire and place the documents you want to scan face down into the input tray of the scanner Using the flatbed Use the flatbed to scan documents that cannot be scanned using the ADF 1 Lift the flatoed cover 2 Place the document face down on the glass platen 3 Position the document with the upper right corner aligned with the reference mark A 61527 May 2006 25 Verifying your Kodak provides a test application called the Kodak Scan Validation scanner installation Tool This section describes how to use this tool to perform a basic scan function which includes feeding paper and viewing captured images on your PC The following steps help you to verify that your scanner installation was successful If this procedure is successful you will be ready to use your scanner If it is not successful go back and review the installation
8. Kodak Scanner The Kodak Scanner Properties dialog box allows you to review and Properties dialog box configure the scanner s settings It consists of several tabbed windows each of which will be described within this chapter Click on each tab to set all the desired values You do not have to click OK until you have made all selections on all of the tabs Buttons on the Kodak The buttons at the bottom of the dialog box are described below Scanner Properties dialog 21x box Imaging Paper Compression Dropout Multifeed Options Setup Info Binarization iT hresholding id Noise Filter none st L Front Color L Rear Color Front Bitanal Rear Bitonal Image Filter none m Contrast EO al Tere an ad my Resolution dpi 200 Polarity Black on white e olor Table IF Convert Color To Grayscale Paper Source ADF T Defaults Copy OF Cancel Defaults when you select Defaults the message Reset all values to factory defaults will be displayed Clicking Yes on this message will reset all values on all tabs to the factory default settings Copy copies the settings of the front camera to the rear camera for the selected camera bi tonal color or grayscale For example if you have Front Bi tonal highlighted these values will be copied to the Rear Bi tonal camera If you have Front Color highlighted these values will be copied to the Rear Color camera This opt
9. error codes scanner Flashing green indicates the scanner is warming up from a power saving mode and preparing to scan Steady green indicates the scanner is ready to scan Flashing red indicates a scanner error such as the ADF cover is open Clearing a document If your scanner stops scanning due to a document jam follow the jam procedures below 1 Open the ADF cover 2 Remove any jammed documents from inside the scanner 3 Close the cover Getting service If your scanner needs service go to the website at www kodak com go docimaging There you can find out how best to obtain service for your scanner for your region 18 A 61527 May 2006 Problem solving Use the chart below as a guide to check possible solutions to problems you may encounter when using the Kodak i55 i65 Scanner Problem Possible Solution Scanner will not scan no LED display Make sure that the power cord is plugged securely into the back of scanner and the wall outlet the power light is illuminated on the power supply e the power switch is on the wall outlet is not defective call a licensed electrician the PC and or the scanner was not restarted after installing the software Image quality is Clean the imaging area See the procedures in Chapter 5 poor Maintenance decreased lines or streaks Documents are jamming Make sure that the input tray and side guides are adjusted for the width of the
10. Preset Front Rear Size fus Letter 5 5 amp 11 inches Units Inches Defaults Copy Camera selection box lists the available sides of an image that you can define individual image processing values The display window on the right will display the cropping area you are altering The cropping area will change as values are being altered Cropping values Cropping allows you to capture a portion of the document being scanned Cropping options can be used independently with color grayscale and bi tonal images and are also front and rear side independent however for simultaneous output scanning color grayscale and bi tonal cropping must be the same per side e On an i55 Scanner one cropping option can be assigned per document e On an i65 Scanner two cropping options can be set per document Cropping select one of the following options Automatic dynamically adjusts the cropping window for different document sizes based upon the edges of the image Use this option for batches of mixed sized documents Aggressive selecting this option will eliminate any residual white gray border on any image edges When using Aggressive cropping there is a possibility that a small amount of image data from the edge of the document may be lost A 61527 May 2006 43 Relative to Document zone processing used for batches of same sized documents zone processing is a floating fixed crop window the zone lo
11. Warranty service is limited to the United States KODAK MAKES NO OTHER WARRANTIES EXPRESS IMPLIED OR STATUTORY INCLUDING BUT NOT LIMITED TO THE WARRANTY OF MERCHANTABILITY OR THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE FOR THIS PRODUCT REPAIR OR REPLACEMENT WITHOUT CHARGE ARE KODAK S ONLY OBLIGATIONS UNDER THIS WARRANTY KODAK WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM THE SALE USE OR IMPROPER FUNCTIONING OF THIS PRODUCT REGARDLESS OF THE CAUSE SUCH DAMAGES FOR WHICH KODAK WILL NOT BE RESPONSIBLE INCLUDE BUT ARE NOT LIMITED TO LOSS OF REVENUE OR PROFIT DOWNTIME COSTS LOSS OF USE OF THE PRODUCT LOSS OF DATA COST OF ANY SUBSTITUTE PRODUCT FACILITIES OR SERVICES OR CLAIMS OF CUSTOMERS FOR SUCH DAMAGES This limitation of liability will not apply to claims for injury to persons or damage to property caused by the sole negligence or fault of KODAK or by persons under its direction or control 88 A 61527 May 2006 A 61527 5 2005 Eastman Kodak Company 2005 EASTMAN KODAK COMPANY Document Imaging Rochester New York 14650 www kodak com go docimaging Kodak is a trademark of Eastman Kodak Company DOCUMENT IMAGING INNOVATION YOU CAN COUNT ON
12. or off O When you turn on the scanner it will go through a series of self tests When completed the green indicator light will remain on and constant Adjusting the input Documents are placed into the input tray to be scanned through the tray automatic document feeder To adjust the input tray 1 Lift the input tray to about a 45 angle 2 Pull the input tray wire leg down 3 Place the wire leg on the top of the clips on the flatbed cover 4 Press down slightly on the input tray to snap the wire leg into the clips A 61527 May 2006 21 To accommodate longer documents longer than 36 cm 14 in Pull the input tray extension wire out to the desired length The input tray has side guides that can be adjusted to accommodate the size of the documents you are scanning To adjust the side guides Move the side guides in out to the desired position 22 A 61527 May 2006 Installing and adjusting the output tray Lifting the flatbed cover Start and stop scanning The output tray receives scanned documents from the automatic document feeder after they are scanned Before scanning documents be sure the output tray is properly installed and adjusted To install and adjust the output tray 1 Hold the output tray at about a 30 angle 2 Insert the three tabs on the output tray into the three slots on the automatic document feeder 3 Lower the tray to lock it into place 4 Pull the o
13. 165 Scanner v0 2 has been successfully completed Press the Finish button to exit this installation Cancel 8 Click Finish A 61527 May 2006 11 Making connections The Kodak i55 i65 Scanners can accommodate either a USB or SCSI connection Depending upon whether you are connecting USB or SCSI go to the one of the following sections USB connections Verifying for a USB port After you install the Kodak Driver Software check for the presence and version of a USB port e Select USB Test Kodak 155 165 Scanner Install Scanner Software View Users Guide USB Test The USB verification tool will check your operating system and hardware capability to determine if you need to install a USB card e f a functioning USB 2 0 port is present the following window will be displayed Click OK and proceed with the next section USB Test Your Operating System supports USB 2 0 and a USB 2 0 port was Found Please be sure to plug your scanner into a USB 2 0 port e f your PC does not have a USB 2 0 port installed you should install a USB 2 0 Accessory card USB Test Your Operating System supports USB 2 0 but no USB 2 0 port was Found Please install a USB 2 0 card e f you get any message other than either of the messages above see the section entitled USB connection issues in Chapter 6 Troubleshooting 12 A 61527 May 2006 Connecting the USB cable IMPORTANT If you have not ins
14. Enter the filename or choose Browse to locate the ScanValidation exe file amp Scan Validation Tool X Driver Types SIS Cancel Drivers Kodak Scanner 1100 Kodak Scanner i200 Kodak Scanner 130 140 Kodak Scanner 155 65 Kodak Scanner 1600 Kodak Scanner i000 2 Select TWAIN or ISIS for the Driver Type and the Kodak Scanner 155 i65 Scanner as the Driver The Scan Validation Tool dialog box will be displayed 3 Double click the Scanner icon to access the Kodak Scanner Properties dialog box lol x MF Save Images To Files Display Every f Total Last File A 61527 May 2006 33 Using the TWAIN The TWAIN Datasource is a piece of software that communicates with Datasource your Kodak Scanner It is provided with the i55 and i65 Scanners Many scanning applications support the TWAIN standard and this datasource can be used to interface with these applications This section provides descriptions of the scanner features using options on the TWAIN tabs and how to set these options If you are using the TWAIN Datasource follow the procedures in this section to set up your scanner If you are using the ISIS Driver see the section entitled Using the ISIS Driver later in this chapter For the purpose of this manual all displayed dialog boxes assume the features on the Kodak i65 Scanner duplex scanner If you have a Kodak i55 Scanner simplex scanner options are limited to simplex scanning only
15. HEH 89 e B3 E3 Er EB EH v Save Images To Files Display Every T otal Last File The documents will be scanned and displayed in the Scan Validation Tool window NOTE If the scanner is in lamp saver mode a message will be displayed that the lamps need sufficient time to warm up After the images have been displayed your scanner installation verification is completed 8 Click the Close box XJ to exit the Scan Validation Tool 28 A 61527 May 2006 Viewing test images The images you scanned can be found in the TWAIN folder on the C drive Files will be named using the following naming convention image0000001A jpg is a front image image0000001B jpg is a back image Double click on this file to open and view the captured image Because factory default settings were used the image quality may not be optimized to meet your needs To learn more about image processing features go to Chapter 4 mage Processing The Image Processing chapter provides detailed descriptions of the available image processing features When testing has been completed delete the test images Application software Some scanning applications are available on the CDs packed with your scanner You may also use other capture applications See the User s Guide provided with these applications for instructions on how to use the software A 61527 May 2006 29 4 Image Processing Overview Common terms This chapter introduces concept
16. Input tray and flatbed cover only needs to be replaced if they get damaged Replacing the feed Degradation of feeder performance multiple feeds stoppages etc module indicate a need to change the feed module Failure to clean regularly and or use of non recommended cleaning solvents can shorten the feed module life For additional feed modules see the section entitled Supplies and consumables later in this chapter 1 Open the ADF cover 2 Squeeze the plastic clamps that hold the feed module in place and lift it out of position 3 Push the new feed module into position aligning the new feed module into the slots until it snaps into place 4 Close the ADF cover A 61527 May 2006 71 Replacing the paper feed 1 Open the ADF cover roller 3 Remove the paper feed roller 72 A 61527 May 2006 4 Insert the new paper feed roller by aligning the tabs into the slots and pressing the roller into place Tab Slot 5 Reinsert the paper feed roller cover and snap it into place 6 Close the ADF cover A 61527 May 2006 73 Replacing the input tray If the input tray needs to be reinstalled or replaced use the following procedure 1 Remove the flatbed cover from the scanner by lifting the flatbed cover straight up 2 Raise the input tray as shown and gently lift the input tray out of the slots Pins and slots To install a new input tray 1 Align the pins on the inpu
17. OF Cancel Binarization is the process of converting a grayscale or color image to a bi tonal image There are several different methods of performing this conversion Two of the options Kodak provides are iThresholding and Adaptive Threshold Processing These options are applied to grayscale scanned images and output a bi tonal electronic image Thresholding and Adaptive Threshold Processing separate the foreground information from the background information even when the background color or shading varies and the foreground information varies in color quality and darkness Different types of documents may be scanned using the same image processing parameters and still result in excellent scanned images iThresholding selecting iThresholding allows the scanner to dynamically evaluate each document to determine the optimal threshold value to produce the highest quality image This allows scanning of mixed document sets with varying quality i e faint text shaded backgrounds color backgrounds to be scanned using a single setting thus reducing the need for document sorting When using iThresholding only Contrast may be adjusted Adaptive Thresholding ATP the Adaptive Threshold Processor separates the foreground information in an image i e text graphics lines etc from the background information i e white or non white paper background When using Adaptive Thresholding Threshold and Contrast may be adjusted
18. documents you are scanning the output tray is adjusted for the length of the documents you are scanning all documents meet the specifications for size weight and type as outlined in the section entitled Document preparation e the scanner is clean the feed module is installed properly and securely in place When the scanner is powered up it he shipping switch was not unlocked Unlock it See the section makes noise and does not come to the entitled Unlocking the scanner in Chapter 2 Ready state he scanner is not located on a level surface This may cause the scanner to function improperly You can specify an image from the Verify that the SCSI or USB cable is plugged in correctly scanner but the scanner or computer Only two SCSI terminators can be connected to the SCSI chain one is crashes when scanning at the end of the SCSI device and the other is already in the host adapter Verify that the SCSI terminator is ON if the scanner is the last device on the SCSI chain See the section entitled SCSI connections in Chapter 2 Verify if more than one item on the SCSI chain has the same ID See the section entitled SCSI connections in Chapter 2 Distorted images The feeder holds up to 50 documents in the input tray While scanning is taking place you cannot add documents to the feeder If you do add documents your images may be distorted No images are being displayed Documents should onl
19. es 62 Color Dropout options n naoa aoaaa ee 64 Scanner Control dialog BOX EES EE SS SE SS SE Se ee 65 Multi Feed Detection options EES EES cee ee 65 Energy Saving features of the scanner 05 66 Transport Timeout 0 0 0 0 0 cc eee 66 Defining the Scan area ESE EE SS SE SE SE EE es es es 66 SEAN Area dialog JOX bae Seu E x DE et E IEEE 67 2 Maintenance ui is ss o BR ER Roe oe Rol RD e REL Dn deis noe BOE DR 68 Cleaning procedures SES ES ee ee ee ee 68 Cleaning the feed rollers EE EES cece EE EE SS eee 68 Cleaning the feed module ESE SS SE SE EE SE SE se ee 69 Cleaning the imaging area ESE EES SE SE SE SE ee 70 Cleaning the platen glass ESE EE EE EE SS eee 70 Replacement procedures SES ES ES Es ee se ee 71 Replacing the feed module 0 0 0 ce ee 71 Replacing the paper feed roller 0 ESE eee eee 72 Replacing the input tray 0 EE SES ES SE eee 14 Replacing the flatbed cover naaa 15 Locking the scanner EE EE SE SEE eee eas 15 Supplies and consumables 0 0 00 cee ee ee eee 71 i A 61527 May 2005 6 Troubleshooting ss SERE cna we ces ee apo sesta Be ROS a 78 Indicator lights and error codes SES SS SS ee ee 78 Clearing adocument jam SEE SS ES SE SE eee 78 Getting service suci eoe Rea RR Ame a ed EUR S eer aab ee bas 78 Frobleim SOlVINd vi Ee NEE dd eee ee A Rex wor ee
20. factory defaults will be displayed 4 Click OK This resets the software to the factory installed default settings The factory default settings are set to capture bi tonal images For a Kodak i55 Scanner one side of the document will be scanned For a Kodak i65 Scanner both sides of the document will be scanned 5 Click OK on the Kodak Scanner Properties dialog box ze Kodak Scanner Properties Kodak i65 Scanner 7 xl Imaging Paper Compression Dropout Multifeed Options Setup Info Binarizatian IT hresholding T Moise Filter none T EI Front Color Cl Rear Color Front Bitonal Hear Bitonal Image Filter none ka Contrast 50 al Threshold 80 al gt Resolution dpi 200 id Polarity Black on white hd Galen Table Convert Color To Grayscale Paper Source Defautts Copy OF Cancel A 61527 May 2006 27 The Scan Validation Tool screen will be displayed Be sure Save Images To Files is checked and click one of the four icons to display the images in the Scan Validation Tool window pal C3 OB EB M Save Images Ta Files Display E ver 1 Total Last File amp Scan Validation Taal TWAIN 6 Lift the balance wire and place some sample documents face down into the input tray of the scanner gt E Balance 1 wire b 7 Click the Start button on the Scan Validation Tool Ee Scan Validation Tool TWAIN
21. green form and you have selected a bi tonal threshold value of 127 you should choose an electronic color drop out background value greater than 127 so the substituted pixel will be white in the dropped out image 48 A 61527 May 2006 The Multifeed tab Multi feed Detection aids in document processing by detecting documents that may go through the feeder overlapped ze Kodak Scanner Properties Kodak i65 Scanner RAM 7 x Imaging Faper Compression Dropout Multifeed Options Setup Info Length Detection Limit 2 75 finches Multifeed Actions vw Multifeed Stops Scanning lc winnt media ding chic Browse Defaults Copy Ok Cancel Length Detection choose the minimum length of the document that can be scanned with a multi feed being detected The Display window will show the size of the document as you change the value You can select to display this amount in Inches Centimeters Picas Points 20th of Points or Pixels A value of 0 indicates no length detection Length detection is best used when scanning same sized documents Multifeed Stops Scanning if this option is not selected the scanner will log the condition but continue to operate You can choose the sound you would like the PC to make to alert you of a multifeed To choose a sound Click on the Browse button and choose the desired wav file A 61527 May 2006 49 The Options tab The Options tab allows you to se
22. heat may cause damage to the unit and will affect image quality e ona stable level work surface capable of supporting 7 5 kg 16 5 Ibs Tilted or uneven surfaces may cause mechanical or paper feeding problems e within 1 52 meters 5 feet of an easily accessible electrical power outlet Keep the scanner box and packing materials for shipping purposes Install the scanner in the following order 1 Install the Kodak Driver Software 2 Verify that you have either a USB or SCSI connection and connect the cables between your scanner and the PC Connect the power cord to the scanner Set up the input and output trays Unlock the scanner Turn on the scanner DU Oy CY spe e Restart the PC required for SCSI II connection to finalize the Kodak Driver Software installation 8 Install other supplied applications optional IMPORTANT e Install the Kodak Driver Software on the host PC before you connect the scanner For best performance use USB 2 0 when possible A 61527 May 2006 Installing the Kodak Install the Kodak Driver Software before connecting the scanner to Driver Software your PC The Kodak Driver Software consists of the Kodak Scanner Drivers using the TWAIN Datasource and ISIS Driver to be used with either USB and SCSI II connections 1 Insert the Kodak i55 i65 Scanner Installation CD in the CD ROM drive The installation program starts automatically NOTE If the CD does not start automatically
23. image is determined to be blank Images with sizes less than the size number you select will not be created If you use this option you must specify a blank image size for each image output type Bi tonal Grayscale and Color not just one The default for this option is None which means that you will keep all images 50 A 61527 May 2006 The Setup tab The Setup tab allows you to download firmware and set the scanner clock The Setup tab is only available when running the Scan Validation Tool via the TWAIN Datasource Package the scanner firmware runs your Kodak i55 i65 Scanners The value displayed in the Current field is the version of firmware currently in use by your scanner Periodically Kodak releases updated versions of firmware which are available through Kodak Service and Support When Download is selected the Select Scanner Firmware dialog box will be displayed Kodak Scanner Properties Kodak i65 Scanner RAM KIES Imaging Paper Compression Dropout Multifeed Options Setup Info Package Configure Local Time pc 7005 01 fl 10 40 ec 2005701 fl 10 40 Current 0 4 0 i Lock Camera UTC Time pc 7005 01 fl 15 40 ec 2005401 fl 15 40 Serial Humber Defaults Copy OF Cancel Download this option is used to download the latest version of firmware to your scanner Configure displays the local
24. of the options on the ISIS dialog boxes and how to set these options For the purpose of this manual all displayed dialog boxes assume the features available on the Kodak i65 Scanner If you have a Kodak i55 Scanner all options are limited to simplex scanning only Scanner Settings dialog See the section entitled Starting the Scan Validation Tool earlier in box this chapter to access the Scanner Settings dialog box Buttons on the Scanner Following are descriptions of the buttons located at the bottom of the Settings dialog box dialog box Kodak 165 on None Camera Scan Source Page Layout Enable Configure Simplex Letter B5x1lin iv Front Color ADF Portrait Landscape E Front Binary Dots per inch 200 Color First l C Binar First Binareation Color Correction arm First Fixed Processing FF Tes with Pictures 3p Back Color Dithering None Af Back Binary Cropping Color First Fixed To Transport Binary First Contrast os Threshold f Manual Automatic H n L I B H H Auc Lighten Normal Darker More Enp More displays the More Scanner Settings dialog box This dialog box provides additional image processing settings unique to the Kodak i55 i65 Scanners Area displays the Scan Area dialog box Copy this function is only available when using the scanner in duplex mode The Copy button provides a convenient way to set up the color grays
25. offset for center fed feeding based upon document size selected Rotate Frame automatically calculates the offset values based upon feed orientation of the document size selected landscape vs portrait NOTES You can scan documents longer than 35 56 cm 14 in and less than 86 cm 34 in when the host PC is configured with adequate memory see System requirements for more information Automatic and Relative to Document cropping in Flatbed mode work well in most cases When the scanner cover is removed to accommodate large magazines books or other bound material or when the flatbed glass becomes dirty Automatic cropping performance may not be as desired In these cases you might try using the Image Edge Fill option or scanning in Fixed cropping mode and more carefully aligning the document on the flatbed A 61527 May 2006 Automatic Deskew select this option to automatically deskew a document within 0 3 degrees of the leading edge of the document This option is only available if you have Automatic cropping selected Image Edge Fill fills the edges of a scanned image after all other image processing options have been applied by covering the area in Black or White as selected Select a value in the Top Left Right and or Bottom area s from each side of the scanned image to be filled NOTE When using this option be careful not to enter a value too large as it could fill in image data that you wa
26. open the My Computer icon on your desktop Double click the icon for your CD ROM drive then double click on Setup exe Kodak 155 165 Scanner Install Scanner Software View Users Guide USB Test 2 Select Install Scanner Software The Kodak i55 i65 Scanner Installation window may be displayed Kodak 155 165 Scanner Installation X Portions of this application are already installed Existing Files will be upgraded as necessary Continue with installation NOTE This window may or may not be displayed depending upon what was previously installed on your computer OGGO C A 61527 May 2006 9 3 Click Yes The Welcome window will be displayed Ja Kodak 155 165 Scanner Installation X Welcome This installation program will install the Kodak 155 165 Scanner vi 2 lt ig strongly recommended that vou exit all Windows programs aside from the Document Imaging User s Guide before running this Setup pragram Click Cancel to quit Setup and then clase any programs you have running Click Next to continue with the Setup program WARNING This program i protected by copyright law and International treaties Unauthorized reproduction or distribution af this program or any portion of it may result in severe civil and criminal penalties and Will be prosecuted
27. procedures outlined in the section entitled Installing the scanner in Chapter 2 NOTE Detailed descriptions of all the options on the Scan Validation Tool dialog boxes can be found in Chapter 4 Image Processing Before you begin be sure the scanner is on and ready to scan 1 Select Start gt Programs gt Kodak gt Document Imaging Scan Validation Tool The Scan Validation Tool dialog box will be displayed Select TWAIN or ISIS for the Driver Types and Kodak Scanner i55 i65 as the Driver The Scan Validation Tool dialog box will be displayed amp Scan Validation Tool Ed Driver Types Cancel Drivers Kodak Scanner Kodak Scanner i200 Kodak Scanner id Kodak Scanner 155 165 Kodak Scanner El Kodak Scanner 2 Click the Scanner icon to access the Kodak Scanner Properties dialog box lol MF Save Images Ta Files Display Every ho Total Last File 26 A 61527 May 2006 3 Select Defaults 24 xj Imaging Paper Compression Dropout Multifeed Options Setup Info Binarizatian IT hresholding x Moise Filter none m EI Front Color Cl Rear Color Front Bitonal Hear Bitonal Image Filter none ka Contrast 50 al Threshold 38 mj J zz Resolution dpi 200 T Polarity Black on white E olor Table Convert Color To Grayscale Paper Source Defautts Copy OF Cancel A confirmation message Reset all values to
28. reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for additional suggestions Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product they must be used in order to ensure compliance with FCC regulation A 61527 May 2006 Japan This is a Class B product based on the standard of the Voluntary Control Council for interference by information Technology Equipment VCCI If this is used near a radio or television receiver in a domestic environment it may cause radio interference Install and use the equipment according to the instruction manual Acoustic emission Maschinenlarminformationsverordnung 3 GSGV Der arbeitsplatzbezogene Emissionswert betr gt lt 70 db A Machine Noise Information Ordinance 3 GSGV The operator position noise emission value is 70 dB A
29. section entitled Verifying your scanner installation in Chapter 3 for instructions and use Other scanning applications are also provided If you choose to use one of these applications or another image capture application not provided see the User Guide s provided with these applications for instructions on how to install and use the software A 61527 May 2006 17 Scanner components Front view Input tray extension Input tray d Side guides x Balance wire Flatbed cover d JU F E mel Indicator lights d F Y ADF cover Output tray Output tray extension Indicator lights these indicator lights indicate the conditions of the scanner See the section entitled Indicator lights later in this section Side guides slide the guides in or out to accommodate the document size you want to scan The balance wire must be lifted up before you can adjust the side guides Input tray place documents face down in the input tray for scanning The input tray holds up to 50 documents Input tray extension pull out to accommodate documents longer than 36 cm 14 in Balance wire place the documents to be scanned in the input tray and lower the balance wire to keep the documents in place and aid in document feeding Flatbed cover lift this cover to access the flatbed The flatbed cover can be easily lifted up to provide more clearance for scanning thick books on the flatbed ADF co
30. tables using the Brightness and Contrast Control these tables will also be available For more information on the Brightness and Contrast Control see the Reference Guide A 61506 Paper Source provides the following options ADF select this option when using the scanner in continuous feed mode e Flatbed select this option when using the flatbed for scanning documents that cannot be scanned when used the automatic document feeder such as thick or bound documents books ADF Flatbed if you select this option and no documents are in the ADF the scanner will automatically use the flatbed A 61527 May 2006 41 Scanning grayscale images The descriptions below are for scanning grayscale images only Resolution or dots per inch dpi indicates the scanning resolution which largely determines the quality of the scanned image The greater the resolution the better the reproduction However scanning at a higher resolution also increases scanning time and file size Choose a resolution value from the drop down list The default is 200 dpi Available resolutions are 75 100 150 200 240 300 400 or 600 Color Tables the selection of a color table effects how the scanner reproduces the color of a scanned document Color Tables are look up tables that store color descriptions which can be used for gamma correction of images being transferred between different equipment i e scanners printers monitors etc The se
31. the scanning area Width the width of the scanning area Height the height of the scanning area Snap causes the dimensions of the Area box to be controlled in fixed 1 8 inch increments This option is not available in Pixels mode A 61527 May 2006 67 5 Maintenance Cleaning procedures Your scanner needs to be cleaned periodically If documents do not feed easily if several documents feed at the same time or if streaks appear on your images it is time to clean your scanner The section entitled Supplies and consumables at the end of this chapter provides a listing of the supplies required to clean your scanner IMPORTANT Use only non flammable cleaners such as those provided through Kodak Parts Services Do not use household cleaners Do not use cleaners in confined areas use with adequate ventilation Do not use cleaners on hot surfaces Allow surfaces to cool to ambient temperature before use Cleaning the feed rollers 1 Lift the ADF cover 2 With a roller cleaning pad wipe the feed rollers from side to side Rotate the feed rollers to clean the entire surface IMPORTANT The roller cleaning pad contains sodium lauryl ether sulfate which can cause eye irritation Refer to the MSDS for more information 3 Dry the feed rollers with a lint free cloth 68 A 61527 May 2006 Cleaning the feed 1 Remove the feed module by squeezing the plastic clamps that hold module the feed module in place
32. time UTC Universal Time Clock and the scanner serial number Lock camera click this button to lock the scanner s flatbed camera assembly This is normally done before shipping the scanner to avoid damage to the flatbed camera Refer to the section entitled Locking the scanner in Chapter 2 for more information and procedures A 61527 May 2006 51 The Info tab The Info tab displays information that is pertinent to your scanner 2 x Imaging Paper Compression Dropout Multifeed Options Setup Into iic CD Version Kodak 155 165 Scanner wv z Application Kodak Scanner Validation Tool 5 20 1 53 OO4 Lz O3 5 20 Driver ELS we 36 2004 12 08 RAM EDZ I55 165 HIPPU Hodak Host Image Processing DLL 3 16 10 05 7004 Scanner Model i165 Serial Number FW Version 0 4 0 Accessories Platen White Background Date Time z ngb5 0l 17 10 41 First Scar oo00 00 00 00 00 Total Pages O ADF O0 Flatbed Multifeed Count Copyright toet 13598 2004 Eastman Kodak Company All Rights Reserved Defaults Copy OF Cancel 52 A 61527 May 2006 Using the ISIS Driver The ISIS Driver is a piece of software that communicates with the scanner This driver is created and maintained by Pixel Translations Inc and is provided with the scanner by Kodak Many scanning applications support ISIS drivers and this driver can be used to interface with them This section provides descriptions
33. to black A 61527 May 2006 37 Majority Rule sets the central pixel value in a matrix according to the majority of white or black pixels in a matrix Er Ed De VE m zi s MEM QU rete Pe tm PI e EE WETE pee EE ge ao Hy T RAS MEL d qu No Noise Filter Used Lone Pixel Image Filter used to enhance images containing dot matrix text and or images printed with shaded or colored backgrounds using halftone screens This filter effectively eliminates noise caused by the halftone screen Choose none or Halftone Removal Halftone Removal is used to enhance images containing dot matrix text and or images with shaded or colored backgrounds using halftone screens This filter effectively eliminates noise caused by the halftone screen Contrast sets the image contrast by adjusting the difference between black and white thereby making an image sharper or softer In a low contrast setting the difference between black and white is small so the image is softer In a high contrast setting the difference between black and white is large so the image is clearer Select a contrast value from 1 to 100 The default is 50 Contrast 1 ABCDEFGHIJKLMNOPORSTUVWXYZ abcdefghiklmnoparstuvwxXyz 1234567890 Modern Contrast 60 ABCDEFGHIJKLMNOPORSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890 l Modern Contrast 100 ABCDEF GHIKEMNORORS TUVWXYZ Zabcdefghijkimnoparstivwxyz ET ES 221234567890 Modems ss Adjust the con
34. to the maximum extent possible under law Cancel 4 Click Next The Software License Agreement window will be displayed JA Kodak i55 i65 Scanner Installation EASTMAN KODAK COMPANY SOFTWARE LICENSE AGREEMENT Read the following terms and conditions carefully before using this Software Use of this Software indicates your acceptance af these terms and conditions IF vau do nat agree with them vou should promptly return the package in its entirety for a Full refund LICENSE Grant of License Eastman Kadak Company E adak grants you a license to use one copy of the enclosed software program s the Saftware subject ta the license restrictions set forth below Restrictions on Use Tou may use the Software only on one computer at a time For each additional computer on which the Software ie running at the same time you will Cancel 5 After reading the agreement click Agree to continue 10 A 61527 May 2006 Ja Kodak 55 165 Scanner Installation X Please enter your name and company below M ame ohn Doe Company ABC Compar Back Cancel 6 Enter yourname and company name and click Next EET MEE x Copying file SVKVINMNHTSSYSTEM3ZNdrmversskdsmm sve ei 7 2276 Cancel 7 When the installation is complete the following dialog box will be displayed 2 Kodak i55 i65 Scanner Installation l x installation Completed The installation of the Kodak 155
35. 155 165 Scanners Kodak A 61527 Contents T AMBFOGOU CODE OE adeo Euge ER De Rb Wey cont M aua fred oe elei oar aed aed did 1 Scanner features s cios sos ue doo E ndi OE SUR DUE EQUOS dU AP Rede eee Seed 2 Sale niie daa es s certet utt OE N EE AA ee a 2 MS DoE IL OE EO OE HO EI IN 2 Safety precautions SE EE ce s 2 User precautions cus SR pesado RED RAS KORREK BERE OER BEE 3 Safety and regulatory agency approvals 3 Environmental information SE SS SS cee ee ee 4 EMC statements uuo bek PD DS PERDE be led des 4 INC dle 29 8 567 Bus he he ae Se Sh DER DE hen Gi 4 label et ast Me e nce eed ae acta os e a Ee ca eee ane ee 5 Acoustic emission iS ETES BEURS DOE Gone edo eed Aa 5 Power system connection Es ss eee 5 2 Geuing started 4 EERDER eE Cee m der ie dr OE qe EE s 6 Whats mie DO vsus tei uS Pope E Rar d en ier ot xd Ee io Ed 6 System requirements 0 0 0 0 ce eee ren 6 BINS GIN AWN hd EE N od aon dod e RR EN EE apod M cb ed 8 Site specifications 44 ada beer m RR YR UR EROR RO me XXE EE 8 Installing the scanner llle 8 Installing the Kodak Driver Software llle 9 Making connections llle 12 Verifying for a USB port 0 0 0 cc ee 12 Connecting the USB cable 0 00 cee ne 13 SCSI CONNCCHONS s 3 359 Beano ead Dx d Y Satan Nina 14 SCSI interface device ID llle 14 Setting the SCSI terminator
36. 8 pixels mm Choose a resolution value from the drop down list The default value is 200 dpi Available resolutions are 75 100 150 200 240 300 400 or 600 Polarity the host PC provides information to the scanner defining whether the image should be stored in standard or reverse polarity The default polarity is Black on a White background Reverse polarity is White on a Black background remos opm EF Et Ires PITTITPTEDBNTE aer PITE ip POLPRE PLENTY FETTE E AF FEHLER T ei HE FAE HIRE CANAI TEIT TK m hm en mI di leis xx ie TTE 4 Ao EAR l y tas tarn mus i EE Eur o band l e BET on 7 EB TAX iu L Upmiktir TM 1 TORE ee DEDEN TERA TE BST Ob DOEETO Black on White polarity White on Black polarity I J Ju G A 61527 May 2006 39 Color Table Not applicable for bi tonal images See the next section Scanning color images Paper Source provides the following options ADF select this option when using the scanner in continuous feed mode e Flatbed select this option when using the flatbed for scanning documents that cannot be scanned when used the automatic document feeder such as thick or bound documents books e ADF Flatbed if you select this optio
37. CD type Grayscale output bit depth is 8 Color capture bit depth is 48 Color output bit depth is 24 Output Resolutions 75 100 150 200 240 300 400 and 600 dpi File Format Output BMP TIFF JPEG PDF with bundled software Scan Area Automatic Document Feeder e Maximum 21 6 x 86 cm 8 5 x 34 in when the host PC is configured with adequate memory Minimum 9 4 x 14 cm 3 7 x 5 5 in Flatbed Up to 21 6 x 29 7 cm 8 5 x 11 69 ADF Capacity 50 sheets A4 20 Ib paper Recommended Daily 1 500 Volume Cold Cathode Fluorescent Electrical requirements 100 240 V AC 50 60 Hz Scanner Dimensions Height 19 9 cm 7 8 in Width 56 7 cm 22 3 in Depth 35 cm 13 8 in Kodak i65 Scanner 7 5 kg 16 5 Ibs Scanner Power Voltage 24 0 Vdc Current 2 0 A i55 Standby 20 watts ib5 Running 30 watts Sleep mode 12 watts Power Consumption i65 Standby 30 watts i65 Running 40 watts Sleep mode 12 watts Acoustic Noise Operating less than 58 dB Sound Power level Standby less than 46 dB A 61527 May 2006 Appendix B Warranty Information United States Warranty Subject to the WARRANTY LIMITATIONS herein Kodak warrants its products to function properly during the warranty period Warranty period starts from the date of initial installation when installed within one year from date of shipment If the purchase price does not include installation the warranty becomes effect
38. F FEIGE AREE s AE dit RE TAHAT TEIT Tm bom uu S MIU Arx dri x xs wie T E E An CE EA xi B 7 i 1 y s x ue ar 1 Cl sy dd ji TE ris gie a Eat 1H Cuts l rural I As UE n ii EB TA EE i EE TAS oa EN FETA CHARGE i in Tr ES L YOR 1L GAGEA TENS hERTIE AE GST ICIBIETR Aor Black on White polarity White on Black polarity Noise filter occasionally small dots or specks appear in the background of a scanned image These specks increase file compression size and usually contain no image information Using the Noise Filter on documents containing very fine detail e g the dot on an i in 4 point type may cause information to be lost It is c M that you do not use the Noise Filter when scanning documents with text smaller than 7 point type Noise Filter can be used with binary images only and is Front Rear independent Choose None Lone Pixel or Majority Rule Lone Pixel reduces random noise on binary images by converting a single black pixel surrounded by white to white or by converting a single white pixel surrounded by black to black Majority Rule sets the central pixel value in a matrix according to the majority of white or black pixels in a matrix Trim rf at GE m Paz Va d w n Neteco em ETE EE RE N dad es did TT Eee el a OER rahe nE Gas No Noise Filter Used Lone Pixel A 61527 May 2006 63 Color Dropout options Electronic color dropout is used to elimina
39. FGHUKLMNOTORSTUM WAY ZabedetghijkImmopgrstus wx yeF234567890 Times Roman 12pt 4PPLIEO IMAGE me TWO ren THREE mae Me CREE EE TEE YHHEE ruat FOUR I FOUR THREE mr E THREE range FOUR raya u FOUR four E 1 TEER EE TT i i a z 12 10 a E jrn TATE TPT TT Pp ey PU TAT T ri TTT TITIT a DT 200 dpi 80 Threshold 20 Contrast 200 dpi 80 Threshold 100 Contrast Lighten Normal and Darken are used as quick sets to adjust the threshold Lighten 72 Normal 90 and Darken 128 60 A 61527 May 2006 More Scanner Additional image processing values unique to the i55 i65 Scanners are Settings dialog box available when you choose the More button on the Scanner Settings dialog box More Scanner Settings i I 7 Scan Source Image Control Options Configure Simples Deskew iw Front Color ADF m EE Front Binary JPEG Guality Halftone Removal Polarity Black on white m Dolor First Better si Noise Filter C Binary First al Back Eolo a Back Eina f olor First C Binary First Image Edge Fill Black g Left 0 00 IN Right 0 00 In Top 0 00 In Bottom 0 00 IN Background value 45 df d Threshold Value ie eee m Convert Color to Grayscale Scanner Control Eopy Cancel
40. R Upgrading to a newer version of a device driver may add functionality to or improve the performance of this device What do you want the wizard to do Search for a suitable driver for my device recommended C Display a list of the known drivers for this device sa that can choose a specific driver Back Cancel 8 Click Next Upgrade Device Driver Wizards Insert the manufacturer s installation disk into the drive selected and then click OF Cancel d Copy manufacturer s files from D SSWININTSTempsKDS Browse 9 Insert the Kodak Installation CD in the CD ROM drive and locate the KDS folder Locate and select the kdssti in file Lookin C4KDS l e a File name kdsstiint Files of type Setup Information inf 7 Cancel 10 Click Open and proceed with the prompts to install the driver My Network P A 61527 May 2006 83 Testing for a USB When the Kodak device drivers for the Kodak i55 and i65 Scanners are connection installed a copy of the USB test software will also be installed It will be located in this folder by default along with the Kodak Scan Validation Tool software C program files Kodak Document Imaging usbtst exe If you run this executable usbtst exe it will display a set of USB values and protocols At this time the software application will function in all operating systems but will only be valid with the Windows XP system Shortcut to usbtst ex
41. and lift it out of position 3 Reinstall the feed module by pushing the feed module into position aligning the feed module into the slots until it snaps into place A 61527 May 2006 69 Cleaning the imaging 1 Remove dust and debris from this area by using a Staticide wipe or area a small brush Be careful not to scratch the glass when cleaning Use caution when cleaning the upper and lower white background strips Be careful not to catch the small black tabs with the Staticide wipe These tabs are fragile and can bend or break IMPORTANT Staticide wipes contain isopropanol which can cause eye Irritation and dry skin Wash your hands with soap and water after performing maintenance procedures Refer to MSDS for more information 2 Wipe the imaging area again with an almost dry Staticide wipe to remove any streaks 3 When finished close the ADF cover Cleaning the platen glass To clean the smudges and fingerprints on the platen glass 1 Open the flatbed cover 2 Wipe the flatbed platen glass with a fresh Staticide wipe 3 Wipe the flatbed platen glass with a dry Staticide wipe 70 A 61527 May 2006 Replacement This section provides procedures for replacing the following parts procedures Feed module life varies depending upon paper types chemically treated papers environment and cleanliness Paper Feed roller life varies depending upon paper types chemically treated papers environment and cleanliness
42. arg RC etie pA cto e S oR A es 30 Making camera selections 0 0 cee 31 Scan Validation Tool dialog box SEE EE EE ee 32 Starting the Scan Validation Tool 0 0 eee ee 33 Using the TWAIN Datasource SEE SS SS SS SE ee 34 Kodak Scanner Properties dialog bOx 0 000 e eee 34 Buttons on the Kodak Scanner Properties dialog box 34 The Imeagihq eb oe ay Se en ees hes RO ea hw ER ed he ne Ra ae ce 35 scanning bi tonal images EES ESE SE eee 36 scanning color images 0 0 0 cc eee 41 Scanning grayscale images 0 cee ee ee 42 The Baper ID id ie ra ER CR dca he I dido osea ne Sa a N der 43 Cropping values ESE SE SE SS ee 43 Additional paper selections cee eee eee 45 Compression taD e Sag sd ededexo ex HE BERE RE once dede Ped Maa s 46 The Dropout AD a i eod ar MR UR ct eee x eae eode dO Pen 48 The Multifeed tab nananana naaa ee eee 49 The Options AD i tee A et ee ee SA EM a 50 THE Setup taD LEER eee Y EP ones rS ees 51 The NfO Tdbs sax oak OS dad eed EE ac oe a eee a S 52 Using the ISIS Driver 0 anaana eee 53 Scanner Settings dialog box EE EES EE EE EE ee 53 Buttons on the Scanner Settings dialog box o3 Image Processing settings llle 55 Page size and layout aana aaa SES SS SS es 57 More Scanner Settings dialog box SESSE ES SE ee 61 Image Control optionS ESE aaa ee
43. assigned to an internal hard disk drive and 7 8 and 9 are used for diagnostic purposes The scanner will not operate properly if the SCSI ID is set to 7 8 or 9 Using a suitable tool turn the SCSI ID selector switch until the arrow points to the desired ID number 14 A 61527 May 2006 Setting the SCSI terminator The scanner comes with a built in SCSI terminator The terminator ON OFF switch is located on the scanner between the SCSI cable connectors o0 a M o i ake 7 m n e f the scanner is the only or the last device in a SCSI chain place the terminator switch in the ON position e If the scanner is to be located between the computer and another SCSI device place the terminator switch in the OFF position Kodak does not recommend the scanner to be connected between devices in a SCSI chain Connecting the power When the drivers have been installed connect the power supply and cord to the scanner power cord to the scanner Make sure that the power outlet is located within 1 52 meters 5 feet of the scanner and is easily accessible Before proceeding be sure the power to the scanner is off 1 Select the appropriate AC power cord for your region from the supply of power cords packed with your scanner NOTE The power cord for the United States Canada and China look very similar The difference is the United States Canadian power cord has holes in the prongs and the Chinese power cord does not United Sta
44. ave camera selection boxes that refer to the cameras within the scanners Following are some examples of choosing the correct camera for the desired results For the purpose of these examples the TWAIN Datasource has been used Example 1 scanning a two sided color document both sides in color If you want to scan a two sided color document make your camera selections as follows Vehicle lic Imaging Paper Compres application V1OT GASY ae Frant Calor Rear Color L Front Bitonal L Rear Bitonal Camera selection Result Side 1 Result Side 2 e Select both Front Color and Rear Color Depending on which camera in this example Front Color is highlighted will depend on which side of the document is scanned first The result is two images in color Example 2 scanning a two sided color document front side only in bi tonal If you want to scan only the front side of a color document in black and white make your camera selections as follows Imaging Paper Compres Vehicle licence vel icle licence qaa application V1OT br Pad lon vor 4 L Front Color L Rear Color Front Bitanal L Rear Bitonal Camera selection Original Side 1 Result Side 1 e Select and highlight Front Bitonal The resultant image will be the front side of the document in black and white A 61527 May 2006 31 Scan Validation Tool The Scan Validation Tool SVT is a diagnostic application that Koda
45. bility to determine if you have a functioning USB 2 0 or if you need to install a USB card Your operating system is correctly configured to support USB 2 0 USB Test Your Operating System supports USB 2 0 and a USB 2 0 port was Found Please be sure to plug your scanner into a USB 2 0 port If a functioning USB 2 0 port is present this dialog box will be displayed Your operating system supports USB 2 0 however a USB 1 1 port was found USB Test Your Operating System supports USB 2 0 but no USB 2 0 port was Found Please install a USB 2 0 card e f your PC does not have a USB 2 0 port installed install a USB 2 0 Accessory card e f a USB 2 0 port or card is installed and the USB test tool does not recognize the USB card as 2 0 install or update the drivers for that card Your operating system only supports USB 1 1 Your Operating System only supports USB 1 1 but na USB 1 1 pork was Found Please install a USB 1 1 card NOTE The scanner may not run at Full rated speed There are some host PC operating systems that do not support USB 2 0 but support USB 1 1 e g Windows 98SE The Kodak i55 and i65 Scanners are rated and designed to operate with USB 2 0 but will function in a USB 1 1 port however the scanner will only perform at a USB 1 1 speed Solutions Update your operating system to one that supports USB 2 0 such as Windows 2000 or Windows XP e You may add a USB 2 0 card but will fu
46. cale or binary image settings on one side and transfer them to the other For example if you highlight and set up Front Binary you can use the Copy button to duplicate those settings for Rear Binary About displays the About dialog box The About dialog box provides detailed information such as the driver version number certification status and the version of QuickDriver used to develop this driver A 61527 May 2006 53 Default when you select Default the values will be reset to the factory defaults OK saves the values set on all dialog boxes Cancel closes the dialog box without saving any changes Camera Settings area The selections in the Camera area list the available sides front and back of an image where you can define individual image processing values Options include Front Color Front Binary Back Color and Back Binary For detailed information about Camera selection see the section entitled Making camera selections earlier in Chapter 4 Camera Enable Configure 1e Front Color 2h Frant Binary Color First C Binary First ale Back Calor af Back Binary f Color First Binary First W Convert Color to Grayscale On the Kodak i65 Scanner there is a separate camera for each side of the document being scanned The Kodak Scanner drivers allow you to control the camera settings independently Some settings apply only to binary black and white images others apply
47. canning translucent documents black bleed through may be displayed on the image To minimize this adjust the Contrast value or select Fixed Processing to improve the image For more information on Contrast and Fixed Processing see Chapter 4 Image Processing 80 A 61527 May 2006 Scanner not working If your scanner is not working you may need to reinstall the drivers To verify this 1 Click the My Computer icon and click the right mouse button 2 Select Properties Open Explore Search Manage scan For viruses Map Network Drive Disconnect Network Drive Create Sharkcut Rename Properties 3 Click on the Hardware tab and select Device Manager General Network Identification Hardware User Frofiles Advanced Hardware Wizard The Hardware wizard helps you install uninstall repair mere Unplug eject and configure your hardware Hardware wizard Device Manager The Device Manager lists all the hardware devices installed on your computer Use the Device Manager to change the properties of any device Driver Signing Device Manager Hardware Profiles cos Hardware profiles provide a way for you to set up and store Sal different hardware configurations Hardware Profiles Cancel Apply A 61527 May 2006 81 4 From the Device Manager screen select Imaging devices If the Kodak i55 i65 Scanner appears with a before the name you
48. cated relative to the upper left corner of a document It allows you to select an area on the document to be delivered in either color grayscale or bi tonal format a separate window for both bi tonal and color grayscale may be defined Different parameters may be selected for both the front and rear of the image This option may be used in conjunction with Automatic cropping where a separate color grayscale or bi tonal area to be saved is desired It is useful in applications where a photograph signature embossment or seal appears in a consistent area for an application you may want that small area in color grayscale and the rest in bi tonal Fixed to Transport used for batches of same sized documents allows you to define the area or zone to be imaged If you select this option enter the x and y offset values width and length You can enter the desired values in the fields or use the arrow keys to define the desired area The Display window will show image placement as you change the values The following options are only available when Fixed to Transport or Relative to Document is selected X Offset the distance from the left end of the scanner to the left edge of the scanning area Y Offset the position from the top end of the document to the top end of the scanning area Width the width of the scanning area Length the length of the scanning area Center Frame automatically calculates the x
49. d with adequate memory see System requirements for more information regarding memory requirements Automatic and Relative to Document cropping in Flatbed mode work well in most cases When the scanner cover is removed to accommodate large magazines books or other bound material or when the flatbed glass becomes dirty Automatic cropping performance may not be as desired In these cases you might try using the Image Edge Fill option or scanning in Fixed cropping mode and more carefully aligning the document on the flatbed Page size and layout The default paper size is set when a scanner is first selected You can choose a different paper size using the drop down list box NOTE The Page Size and Page Layout selections also appear on the Scan Area dialog box If you make a change on the Scanner Settings dialog box the same selections will appear on the Scan Area dialog box and vice versa The Page Layout area allows you to select either Portrait or Landscape Portrait will display the image orientation in the shape of a conventional portrait where height is greater than width Landscape will display the image orientation in the shape of a conventional landscape painting where width is greater than height A 61527 May 2006 57 Binarization is the process of converting a grayscale or color image to a binary image There are several different methods of performing this conversion The following descriptions are for binary ima
50. document feeder such as thick or bound documents books e ADF Flatbed if you select this option and no documents are in the ADF the scanner will automatically use the flatbed Dots per inch dpi or Resolution indicates the scanning resolution which largely determines the quality of the scanned image The greater the resolution the better the reproduction However scanning at a higher resolution also increases scanning time and file size Choose a resolution value from the drop down list The default is 200 dpi Available resolutions are 75 100 150 200 240 300 400 and 600 A 61527 May 2006 55 Cropping allows you to capture a portion of the document being scanned All cropping options can be used with color grayscale and binary images Front and Rear cropping are independent however for simultaneous output scanning color grayscale and binary cropping must be the same per side Only one cropping option can be assigned per image Select one of the following options Automatic dynamically adjusts the cropping window for different document sizes based on the edges of the image Use this option for batches of mixed sized documents Aggressive selecting this option will eliminate any residual black border on any image edges In order to achieve this there is a possibility that a small amount of image data from the edge of the document may be lost Fixed to Transport used for batches of same sized documen
51. e Properties A General Shortcut Security USB Bes Shortcut to usbtst exe Target type Application Target location Document Imaging Target I Fun in separate memom space Run as different user Start inc C Program Files K0DAKSDacument Imaging Shortcut kep None Bun Mormal window hd Comment Eind Target Change Ican CRESCE If a shortcut of the executable is created and the test switch is added to the end of the Target path to the right of the quotes then when it is launched from the shortcut it will run the dialog boxes as listed above and function accordingly with all the operating systems To verify USB port speed with the scanner run the Scan Validation Tool software and select the Info tab USBSCAN x x will be displayed in parentheses in the Driver box x x is the speed the scanner is actually communicating Z Kodak Scanner Properties Kodak i40 Scanner E 31 xl Imagina Paper Compression Dropout Multifeed Options Setup Dump Info Kodak i i Scanner v1 9 0 pp Kodak Scanner Validation Tool 5 14 1 9 2004 07 02 5 14 D Driver EDS v6 18 2004 07 29 USBSCAN Z O KDS I IT 10 08 05 2004 Kodak Host Image Processing DLL Scanner Model i Serial Number Indicates Actual USB port speed FW Version 0 26 0 84 A 61527 May 2006 USB connection issues The USB verification tool will check your operating system and hardware capa
52. e a Kodak i55 Scanner you can select either Front Color and or Front Bi tonal This means you can scan the front side of a document depending on how the documents are placed in the feeder and create one or two images If you have a Kodak i65 Scanner you can select any individual camera i e Front Color Rear Color Front Bi tonal and or Rear Bi tonal or any combination of the cameras This means you can scan the front side rear side or both sides of a document and create between one and four images Whatever is highlighted in the Camera Selection box determines the values available on the Imaging Paper Compression and Dropout tabs NOTE What is highlighted is not necessarily selected Make sure that the highlighted area you are making changes to is on the selected camera if you want to see these settings reflected in the final image A 61527 May 2006 35 Scanning bi tonal images Bi tonal images are scanned images that are made up of only black and white elements The descriptions below are for bi tonal images only KIES Imaging Paper Compression Dropout Multifeed Options Setup Info dis a Binarization IThresholding M ear Color Front Bitonal Moise Filter ei Hear Bitonal Image Filter nona Contrast 50 al Threshold 30 al Resolution dpi 200 Polarity Black on White Eglon Table Convert Color To Grayscale Paper Source ADF T Defaults Copy
53. e ee dee dui DES 19 Scanner not working EES SS SS ES ES eee 81 Testing for USB connection aana aeaaea ees 84 USB connection issues anaa aaa a llle 85 Appendix A SpecificationS 0 ccc es 87 Appendix B Warranty 0 0 00 ccc ees 88 A 61527 May 2005 jii 1 Introduction The Kodak i55 and i65 Scanners are compact document scanners perfect for workgroups and other decentralized applications These scanners have a 50 page automatic document feeder that scans 32 pages per minute at 200 dpi bi tonal including a flatbed for non feedable documents For your image processing needs the TWAIN Datasource and ISIS Driver are included with the Kodak 155 165 ocanners Kodak i55 Scanner desktop simplex color scanner e Kodak i65 Scanner desktop duplex color scanner This User s Guide provides information and procedures for the Kodak i55 and i65 Scanners using the TWAIN Datasource and ISIS Driver The information in this guide is for use with both scanner models unless otherwise noted A 61527 May 2006 1 Scanner features Safety information MSDS Safety precautions Easy to use e Small compact size e Scans up to 21 6 x 86 cm 8 5 x 34 in using the automatic document feeder when the host PC is configured with adequate memory See the section entitled System requirements for more information e Scans up to 8 5 x 11 69 inches A3 using the flatbed e Scans 32 ppm 200 dpi b
54. e is required to install the drivers Applications and image storage will require additional hard disk space e CD ROM drive Minimum requirements to allow basic scanner operation The following minimum requirements may not achieve the rated speed of the scanner e Intel Pentium Ill 1 GHz processor 512 MB RAM USB port 1 1 or SCSI e Windows 2000 Professional Windows ME Windows 98SE or Windows XP Professional Home e 15 MB free hard disk space is required to install the drivers Applications and image storage will require additional hard disk space e CD ROM drive NOTE The ability to scan longer documents or very high resolutions is somewhat dependent on the available host PC memory Differences in memory use between scanning applications may account for some issues scanning a long document at very high resolution While the memory guidelines above are conservative your experience may vary depending on your host PC configuration and scanning application A 61527 May 2006 7 Installation Site specifications Installing the scanner Unpack the scanner carefully and check the contents If any items are missing or damaged contact your authorized dealer immediately Place the scanner ina clean area with temperature and relative humidity typical of an office environment IMPORTANT Only use the scanner and power supply indoors in a dry location e ina location out of sunlight Direct exposure to sun or excessive
55. ecognition and ICR Intelligent Character Recognition technology read pertinent data without interference from the lines and boxes of the form The i55 I65 Scanners can dropout either red green or blue The Dropout tab allows you to select the desired dropout color and alter the filter threshold and background 2 x Imaging Paper Compression Dropout Multifeed Options Setup Info Front Calor Rear Color Color Dropout CJ Front Bitonal Shen NE Hear Bitonal EE Background Defaults Copy OF Cancel Camera Selection box electronic color drop out is available only for bi tonal and grayscale images Color Dropout choose the color you want to eliminate none Remove Red Remove Green Remove Blue Filter Threshold the value that is used to identify the color which will be dropped out This value is applied to the color area Color with a Red Green Blue component more than the entered value is dropped This setting determines how much of the selected color is dropped out A lower value will leave more of the selected color in while a higher value will drop more of the selected color out Background this value will be substituted in the grayscale pre thresholded image for the color being removed Therefore this value should be higher than the threshold value selected on the Imaging tab for this pixel to become the background color For example if you are scanning a white document with a
56. en you change the Paper Feed roller Imaging area for optimum image quality keep the imaging area clean A 61527 May 2006 19 Back view SCSI ports Power Power switch port USB port Terminator SCSI ID switch selector Power switch turns the scanner on and off Power port connects the power cord to the scanner USB port connects the scanner to the PC SCSI ports two 50 pin high density connectors provide SCSI connections to the scanner Terminator switch allows you to turn SCSI termination on or off if the scanner is at the middle or the end of a SCSI chain SCSI ID selector allows you to assign a specific SCSI device ID to the scanner Indicator lights There are three indicator lights on the ADF When you first turn on the scanner all three lights illuminate momentarily and then flash as the scanner goes through a series of self tests The lights will flash accordingly Foo Power green illuminates and stays on for power Ready green e flashes when the lamps are warming up illuminates when the scanner is ready to scan off when the scanner is in Standby mode Error red illuminates or flashes when there is an error condition NOTE When the scanner is in Energy Star Saving mode all the indicators will be off 20 A 61527 May 2006 3 Using the Scanner Turning the scanner Press the power switch on the back of the scanner to turn the on and off scanner on I
57. ets bulky rings long necklaces etc e Hair length should be kept short using a hair net if needed or tying long hair up in a bundle e Remove all other loose objects from the area that could be drawn into the machine e Take sufficient breaks to maintain mental alertness Follow the recommended Kodak cleaning procedures Do not use air liquid or gas spray cleaners These cleaners only displace the dust dirt or debris to another location within the scanner which could cause the scanner to malfunction Supervisors should review their practices and make compliance with these precautions as a part of the job description for operation of the Kodak i55 i65 Scanners or any mechanical device Safety and regulatory The Kodak i55 and i65 Scanners conform to applicable national and agency approvals international product safety and electronic emission regulatory requirements This includes but is not limited to the following Country or Region Safety Approval Safety Mark Electromagnetic Compatibility EMC Mark Canadas CAN CSA C22 2 No 60950 C22 2 No 60950 CU UL Canada ICES 003 Issue 3 Class B ICES 003 Issue 3 Class B a Eed ad M oa md 9254 Class B CCC S amp E GB 17625 1 Harmonics S amp E European Union EN 55022 ITE Emissions Class B EN61000 3 2 Powerline harmonics EN 61000 3 3 Flicker EN 55024 ITE Immunity United C UL 60950 CFR 47 Part 15 Subpart B FCC Class B A 61527 May 2006 3 Environ
58. fined for all camera selections are independent 66 A 61527 May 2006 Scan Area dialog box The Scan Area dialog box allows you to define the amount of image data which is returned to the host The area can be defined in Pixels Inches or Centimeters The Scan Area dialog box is only available when Fixed to Transport or Relative to Document is selected on the Scanner Settings dialog box Scan Area i Page Layout Portrait Landscape Area Ex yO Pixels y JU f Inches Width 8 1 2 Centimeters Height in IF Snap Cancel Page size and layout the default paper size is set when a scanner is first selected You can choose a different paper size using the drop down list box NOTE The Page Size and Page Layout selections also appear on the Scanner Settings dialog box If you make a change on the Scan Area dialog box the same selections will appear on the Scanner Settings dialog box and vice versa The Page Layout area allows you to select either Portrait or Landscape Portrait will display the image orientation in the shape of a conventional portrait where height is greater than width Landscape will display the image orientation in the shape of a conventional landscape painting where width is greater than height Area X the distance from the left end of the scanner to the left edge of the scanning area Y the position from the top end of the document to the top end of
59. ges only The following binarization options work on grayscale scanned images and outputs a bi tonal electronic image Their strength lies in the ability to separate the foreground information from the background information even when the background color or shading varies and the foreground information varies in color quality and darkness Different types of documents may be scanned using the same image processing parameters and results in excellent scanned images Available binarization options are e iThresholding selecting iThresholding allows the scanner to dynamically evaluate each document to determine the optimal threshold value to produce the highest quality image This allows scanning of mixed document sets with varying quality i e faint text shaded backgrounds color backgrounds to be scanned using a single setting thus reducing the need for document sorting When using iThresholding only Contrast may be adjusted Fixed Processing FP used for black and white and other high contrast documents A single level is set to determine the black and white transition The threshold is programmable over the entire density range Fixed thresholding sets the contrast to O If Fixed Processing is selected Contrast is not available Adaptive Thresholding ATP the Adaptive Threshold Processor separates the foreground information in an image i e text graphics lines etc from the background information i e white or non
60. i tonal duplex portrait orientation letter size documents Choose color bi tonal grayscale simultaneous bi tonal and grayscale or simultaneous bi tonal and color Easy cleaning and maintenance e Output resolutions from 75 to 600 dpi e Bundled ISIS and TWAIN drivers Length checking based on multi feed detection e Choice of USB 2 0 or SCSI II interface Material Safety Data Sheets MSDS for chemical products are available on the Kodak website at www kodak com go msds When accessing the MSDSs from the website you will be required to provide the catalog number of the consumable you want the Material Safety Data Sheet for See the section entitled Supplies and consumables later in this guide for a listing of supplies and catalog numbers Use only the power supply that was provided with the scanner Sino American model SA60 24 IMPORTANT Do not substitute another power supply model or another manufacturer s power supply Be sure to use the proper AC power source Avoid danger of electric shock Only use the scanner and power supply indoors in a dry location Do not install the scanner in a humid or dusty area A 61527 May 2006 User precautions Users and their employer need to observe the common sense precautions applicable to the operation of any machinery These include but are not limited to the following Do not wear loose clothing unbuttoned sleeves etc Do not wear loose jewelry bracel
61. images Adjust the Contrast setting by dragging the Contrast sliding bar to the left or right to achieve the desired Contrast setting Scan the document to check the contrast Threshold thresholding is used to convert a grayscale image into a binary 1 bit pixel image The thresholding value ranges from 0 to 255 The default is 90 A low threshold value will produce a lighter image and can be used to subdue backgrounds and subtle unneeded information A high threshold value will produce a darker image and can be used to help pick up faint images A 61527 May 2006 59 Adjust the Threshold setting by dragging the Threshold sliding bar to the left or right to achieve the desired Threshold setting Scan the document to check the threshold Kodok gta Sence magang Test Chod L 5693 Kodak digital science ap Mwari cn Ja hab fa xod eoqem botot ABCDEFGHIJKLMNOPORSTLUVANXY Z abcdeighijkimneparstuvwx yz 1234567890 Modern ABCBEPGUI IKLMNO POS WXYZ anandefghijkimrppuryi uvwsyz Cuurig Rew IA Se ca EE B Im Tunes Hoera nga ABE DEP LEKE L AA EUIR LIE DIEA Y Pme Ranan pl ARCDEFGHNUKL STNCPORSTLN Ww y aede Limoges ut wes 2 123456790 Times Roman pe ABCDE
62. ing Paper Compression Dropout Multifeed Options Setup Info Front Color Rear Color L Front Bitonal JPEG Quality L Rear Bitonal Compression Defaults Copy OE Cancel Camera Selection box lists the available sides Front Color Rear Color etc of an image that you can define individual image processing values Compression the i55 i65 Scanners can be configured to output bi tonal grayscale and color images in various supported formats and resolutions independent of each other and each side of the image These options vary based on the type of scanner For bi tonal scanning the following compressions are available e CCITT Group 4 TIFF none uncompressed TIFF 46 A 61527 May 2006 The following color grayscale compression options are available e JPEG JPEG compression offers a JPEG quality of Draft Good Better Best Superior Draft smallest file size with draft image quality Good larger file size with good image quality Better larger file size with better image quality Best larger file size with the best image quality Superior largest file size with superior image quality none produces an uncompressed bitmap M A 61527 May 2006 47 The Dropout tab Electronic Color Dropout is used to eliminate a form s background so that a document management system may automatically through OCR Optical Character R
63. ion is only available for the Kodak i65 Scanner OK saves the values set on all tabs Cancel closes the dialog box without saving any changes D 34 A 61527 May 2006 The Imaging tab The Imaging tab allows you to define several image processing values that can be applied to your scanner The Camera Selection box lists the available sides front and rear of any document where you can define individual image processing values For detailed information about the cameras refer to the beginning of this chapter Making camera selections amp Kodak Scanner Properties Kodak i65 Scanner 31 xl ampnre ion Dropout Multifeed Options Setup Info C Front Color DO Rear Color Binarization iThresholding Front Bitonal Noise Filter none Rear Bitonal Image Filter none Y Contrast 50 Ed Ej Threshold 30 T gt Resolution dpi 200 Y Polarity Black on white v olor Table v E Lor wert olor T f Grayscale Paper Source Defaults Copy On the Kodak i65 Scanner there is a separate camera for each side of the document being scanned The Kodak Scanner drivers allow you to control the camera settings independently Some settings apply only to bi tonal images other settings apply to color images By selecting the appropriate camera and image type you can control the scanner s output If you hav
64. ive 14 days from date of shipment KODAK warrants that Product shall conform to the applicable specifications separately provided by KODAK and shall be free from manufacturing related defects in materials and workmanship The warranty covers the purchaser of the equipment as well as anyone else who owns it during the warranty period Warranty repair If the product does not function properly during the warranty period Kodak will coverage provide for telephone support and or on site maintenance including any adjustments and or replacement of parts except Image Maintenance Kits supply items and consumables such as disc paper ribbons print heads feed rollers and all other items as referenced in the Manufacturer s Manual s required to maintain Products in an operating condition which is consistent with Manufacturer s published specifications without charge during Kodak s normal working hours usually 8 00 a m to 5 00 p m Monday through Friday Parts removed from the product and replaced at no charge will become the property of Kodak How to obtain service Call Kodaks Customer Support Center at 1 800 356 3253 The Equipment Service Identifier Kodak K number located on the equipment must be provided Warranty limitations A Circumstances beyond Kodak s control such as Customer overriding bypassing or defeating interlock switches on Products B Misuse abuse failure to follow Manufacturer s Product operating instructions C
65. k dialog box provides with most Kodak scanners The SVT user interface allows access to all the features of the scanner and is a good way to verify that the scanner is working properly The Scan Validation Tool allows you to verify scanner functionality using both the TWAIN Datasource and the ISIS Driver Displays the user interface for the selected driver Displays four Stops the scanner images at a time Starts the scanner Displays eight Closes the image viewer images at a time no images will be displayed 3 Scan Validation Tool TWAIN S ETIEETEEH I Save Imagek To Files Display E verw Total Last File i Scans one page Displays two images at a time Displays one Allows you to select image at a time the directory to store scanned images and Displays the their file names Only License Key available when Save window Images to Files is selected Display Every enter the sampling rate of the images you wish to display while scanning For example to see every image enter a value of 1 To see every tenth image enter a value of 10 Last File displays the full path and file name for the last stored image Total displays the total number of images scanned during the current Scan Validation Tool session 32 A 61527 May 2006 Starting the Scan 1 Select Start gt Run or select Programs gt Kodak gt Document Validation Tool Imaging gt Scan Validation Tool
66. lection of a color table effects how the scanner reproduces the color of a scanned document You can choose from the three Kodak default color tables Pictures Text and Text with Pictures or if you have created your own custom color tables using the Brightness and Contrast Control these tables will also be available For more information on the Brightness and Contrast Control see the Reference Guide A 61506 Convert Color to Grayscale enable this option when you want the captured image to be 8 bit grayscale instead of 24 bit color Paper Source provides the following options ADF select this option when using the scanner in continuous feed mode e Flatbed select this option when using the flatbed for scanning documents that cannot be scanned when used the automatic document feeder such as thick or bound documents books e ADF Flatbed if you select this option and no documents are in the ADF the scanner will automatically use the flatbed 42 A 61527 May 2006 The Paper tab The Paper tab allows you to define values relating to image output i e cropping values rotation paper size and units of measure amp Kodak Scanner Properties Kodak i65 Scanner RAM xl Imaging Paper Compression Dropout Multiteed Options Setup Info Front Color Rear Color El Front Bitonal Rear Bitonal Y Offset Cropping Y Dffsat Width Length Image Edge Fill Top Left Right Bottom
67. mental information EMC statements United States e The Kodak i55 and i65 Scanners are designed to meet worldwide environmental requirements Guidelines are available for the disposal of consumable items that are replaced during maintenance or service follow local regulations or contact Kodak locally for more information e The Kodak i55 and i65 Scanners contain lead in the circuit board solder glass lens and mercury in the lamps Disposal of this material may be regulated due to environmental considerations For disposal or recycling information contact your local authorities or in the USA visit the Electronics Industry Alliance website www eiae org e The product packaging is recyclable e The Kodak i55 and i65 Scanners are Energy Star compliant and are shipped from the factory with the default time set to 15 minutes This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television
68. meras When selected the scanner will convert the color image data to grayscale before making it available to the host PC The other options on this dialog box allow you to define image processing values that can be applied to your scanner Kodak i65 on None Camera Scan Source Page Layout Enable Configure Simplex iv Front Color ADF ki Letter 8 5 x11 IN Portrait Landscape B Front Binary Dots per inch 200 Color First TX Color E iIrrarizatiar D inp Ei Binari ation olor seien Fired Processing FF Tes with Pictures Ar Back Color Ditieririg None y Af Back Binary Cropping fe Color First Fised Ta Transpart artaal C Binary First Automatic rj Auto EEEE EEEE f Manual onver mar ta arayscale B Mare Lopy Default About rea Scan Source the host PC provides information to the scanner defining whether to scan one or both sides of the document Simplex indicates that only one side front side of the document will be scanned Simplex Back indicates that only one side back side of the document will be scanned Duplex indicates that both sides of the document will be scanned Also select one of the following options ADF select this option when using the scanner in continuous feed mode Flatbed select this option when using the flatbed for scanning documents that cannot be scanned when used the automatic
69. n and no documents are in the ADF the scanner will automatically use the flatbed 40 A 61527 May 2006 Scanning color images The descriptions below are for scanning color images only 21 xl Imaging Faper Compression Dropout Multifeed Options Setup Info Front Color Rear Color L1 Frant Bitonal Mare Filter O Rear Bitonal Image Filter Einarizatiam iT hresholding Eontrast Threshold Resolution dpi Polarity Color T able Text with Pictures Convert Color To Grayscale Paper Source ADF D efaults Copy OF Cancel Resolution or dots per inch dpi indicates the scanning resolution which largely determines the quality of the scanned image The greater the resolution the better the reproduction However scanning at a higher resolution also increases scanning time and file size Choose a resolution value from the drop down list The default is 200 dpi Available resolutions are 75 100 150 200 240 300 400 or 600 Color Tables the selection of a color table effects how the scanner reproduces the color of a scanned document Color Tables are look up tables that store color descriptions which can be used for gamma correction of images being transferred between different equipment i e scanners printers monitors etc You can choose from the three Kodak default color tables Pictures Text and Text with Pictures or if you have created your own custom color
70. nction only as a USB 1 1 A 61527 May 2006 85 You do not need to install any additional USB card s USB Test Your Operating System only supports USB 1 1 and a USB 1 1 port was Found NOTE The scanner may not run at Full rated speed The host PC operating system only supports USB 1 1 and does not support USB 2 0 but it found a USB port The Kodak i55 and i65 Scanners are rated and designed to operate with USB 2 0 but will function in a USB 1 1 port however the scanner will only perform at a USB 1 1 speed Solution Update your operating system to one that supports USB 2 0 such as Windows 2000 or Windows XP You can also verify what the scanner port speed is running at by using the Scan Validation Tool application with the scanner USB will not work USB Test Your Operating System is nok compatible with this scanner Please use a supported Operating System This operating system will not support a USB port It is recommended to upgrade the operating system to support USB such as Windows 98SE Windows 2000 or Windows XP A 86 A 61527 May 2006 Appendix A Specifications Scanner Type Speed e 155 Scanner simplex color scanner with an automatic document feeder 32 pages per minute portrait 200 dpi bi tonal e i65 Scanner duplex color scanner with an automatic document feeder 32 pages per minute portrait 200 dpi bi tonal Scanning Technology C
71. need to reinstall the driver software nis d a kp tco wavtoveo c computer eo Disk drives D Display adapters Hd DVDICD ROM drives AS Floppy disk controllers ER Floppy disk drives H IDE ATA ATAPI controllers mg Keyboards ey Mice and other pointing devices Fl Monitors Fl Network adapters EE Other devices ERI cu EE Ports COM amp LPT ee SCSI and RAID controllers HEF Sound video and game controllers System devices Universal Serial Bus controllers a eee 5 Double click on the Kodak Scanner i65 or i55 The Scanner Properties dialog box will be displayed Select the Driver tab i65 SCANNER Properties ajx General Driver iB5 SCANNER Driver Provider Unknown Driver Date Mot available Driver version Mot available Digital Signer Not digitally signed Ma driver files are required or have been loaded for this device To uninstall the driver files Far this device click Uninstall Ta update the driver files for this device click Update Driver Driver Details Uninstall Update Driver DE Cancel 6 Click Update Driver The Upgrade Device Driver Wizard will be displayed A 61527 May 2006 7 Click Next Upgrade Device Driver Wizard Install Hardware Device Drivers A device driver i a software program that enables a hardware device to work with y an operating system This wizard upgrades drivers for the following hardware device o iB5 SCANNE
72. nt Local ili ime Lock Camera 0 4 0 pc 2005 01 17 10 40 tock Camera e scm 2005701717 10 40 UTC Time pe 2005 01 17 15 40 sem 2005 01 17 15 40 Serial Number Defaults Copy OK Cancel The following messages will be displayed Kodak i65 Scanner EET 2 This will move the flatbed camera to the lack position for shipping Are you sure you want to continue ceca Kodskiesseanner eii the scanner then move the lack switch located on the scanner to the lack position Q The flatbed camera is now ready to be locked Turn off Refer to the Users Guide for more information on the lock swatch location Click OK on both messages Lock the scanner by moving the shipping switch located at the bottom of the scanner back to the locked position 76 A 61527 May 2006 Supplies and Contact your scanner supplier to order supplies and parts consumables Description Kodak Digital Science Roller Cleaning Pads 853 5981 Staticide Wipes for Kodak Scanners 896 5519 Kodak i55 i65 Feed Roller Kit 154 4303 A 61527 May 2006 77 6 Troubleshooting Occasionally you may encounter a situation with your scanner where it may not function properly Refer to the information in this chapter to help you resolve the situation before calling Technical Support Indicator lights and The indicator lights provide information on the current state of the
73. nt to keep Additional paper selections In addition to cropping values that can be applied using the Paper tab the following options are available Preset Front Rear Size the default paper size is set when a scanner is first selected You can choose a different paper size using the drop down list box Units defines the primary measurement system Inches Centimeters Picas Points 20th of Points and Pixels are available A 61527 May 2006 45 The Compression tab Compression squeezes a file to decrease the total size Bi tonal images are normally compressed using a CCITT standard called Group IV often used in conjunction with TIFF files Color and grayscale images are often compressed using JPEG techniques TIFF Tagged Image File Format is a file format standard commonly used for bi tonal images It is often used in conjuction with the CCITT Group IV compression standard to reduce image file size Color and grayscale images can be saved in this format too but they are often found uncompressed and are therefore quite large Use the Compression tab to select compression settings JPEG Joint Photographic Editor Group This group developed and lent their name to a file compression standard for color and grayscale images that is widely used by scanners digital cameras and software applications On Microsoft Windows based systems a file with the extension jog has normally been compressed using this standard 21 xj Imag
74. only available when configuring color cameras When selected the scanner will convert the color image data to grayscale before making it available to the host Scan Source the host PC provides information to the scanner defining whether to scan one or both sides of the document Simplex indicates that only one side front side of the document will be scanned Simplex Back indicates that only one side rear side of the document will be scanned Duplex indicates that both sides of the document will be scanned JPEG Joint Photographic Editor Group Quality This group developed and lent their name to a file compression standard for color and grayscale images that is widely used by scanners digital cameras and software applications On Microsoft Windows based systems a file with the extension jpg has normally been compressed using this standard JPEG compression offers a JPEG quality of Draft Good Better Best and Superior Draft smallest file size with draft image quality Good larger file size with good image quality Better larger file size with better image quality Best larger file size with the best image quality e Superior largest file size with superior image quality Image Edge Fill fills the edges of a scanned image after all other image processing options have been applied by covering the area in Black or White as selected Select a value in the Top Left Right and or Bottom area
75. s from each side of the scanned image to be filled When using this option be careful not to enter a value too large as it could fill in image data that you want to keep Image Control options The following Image Control options are available Image Control Options m Desken Iv Halftone Removal Polarity Black on white Noise Filter Mane T Deskew check this option to automatically deskew a document within 0 3 degrees of the leading edge of the document Automatic deskew can detect up to a 45 degree skew and correct up to a 24 degree angle at 200 dpi or a 10 degree skew angle at 300 dpi This option is not available when you have Fixed to Transport or Relative to Document cropping selected NOTE To prevent data loss the document must have all four corners within the image path 62 A 61527 May 2006 Halftone Removal used to enhance images containing dot matrix text and or images with shaded or colored backgrounds using halftone screens This filter effectively eliminates noise caused by the halftone screen This option is only applied to binary images Polarity the host PC provides information to the scanner defining whether the image should be stored in standard or reverse polarity The default polarity is Black on a White background Reverse polarity is White on a Black background remo rape XE io a ELE OE t Tadg gaa ETR ETE e I uq I URR P EXT 1 ws diie EE p Diir e L iE J
76. s that may be new to many users The Kodak i55 and i65 Scanners provide the ability to process scanned images to improve their quality Using these features the scanner can sometimes make the scanned image look better than the original document Basic image processing concepts are reviewed in this chapter to help you take advantage of these powerful features Image processing refers to several separate features of the scanner that allow you to automatically adjust each image in a certain way that may improve the resulting images Common examples of image processing features are correcting any skew in the fed document cutting the edges of the image off to remove any unneeded border or cleaning up extraneous noise on the image The idea is to do this automatically so you can get better images with a minimum amount of rework The information that follows describes the image processing features by walking you through the Scan Validation Tool The same options should be available on the user interface of the software application you are using i e Kodak Capture Software All fields on the Scan Validation Tool are described in this chapter Following are a few common terms that are used throughout this chapter Bi tonal or Binary black and white Color full color image grayscale is derived from the color scan Simplex indicates that only one side of the document the front side will be scanned creating a single page image D
77. t Image Transfer and Transport control Kodak Scanner Properties Kodak i65 Scanner RAM x Imaging Paper Compression Dropout Multifeed Options Setup Infa Image Transfer Control Image Transfer Order Bitanal Image Image Transter cunt infinite a Transport Control Transport Timeout seconds 1 a4 ial Energy Saving Control Idle Time minutes Blank Image Detection Bitonal K E moea al Gray KB mow Color EET none al Default Copy Image Transfer Order if you are using simultaneous output scanning bi tonal and color grayscale for either side this option controls the order in which the scanner returns image data For example if you are scanning color and bi tonal and you select Bi tonal Image the scanner will return the bi tonal front image then the front color image Transport Timeout allows you to set a transport timeout value This value is the amount of time the scanner will wait after the last document enters the transport before the transport timeout action is taken You can specify a time delay setting from 1 to 30 seconds Energy Saving Features of Scanner allows you to set the amount of time the scanner will remain inactive before the scanner goes into an idle state Choices are none and 5 to 60 minutes The default is 15 minutes Blank Image Detection use the slider bar to specify the image size KB below which an
78. t tray with the slots on the flatbed cover as shown in the illustration above and push the input tray into place 2 Lower the input tray against the flatbed cover 3 Replace the flatbed cover on the scanner 74 A 61527 May 2006 Replacing the flatbed cover Locking the scanner If the flatbed cover needs to be reinstalled or replaced use the following procedure 1 Remove the flatbed cover from the scanner by lifting the flatbed cover straight up 2 Install the new flatbed cover by aligning the pins into the holes on the scanner base and setting the flatbed cover into place The TWAIN Datasource provides a Lock camera option which moves the camera into position before physically locking the scanner with the shipping switch ISIS does not provide this option For TWAIN datasource users follow the procedure below 1 Turn on the host PC and start the Scan Validation Tool scan validation Tool x Drivers Kodak Scanner 100 Kodak Scanner i200 Kodak Scanner 040 Kodak Scanner 55 165 Kodak Scanner i600 Kodak Scanner 00 Driver Types NOTE For detailed instructions on starting the Scan Validation Tool see the section entitled Starting the Scan Validation Tool in Chapter 4 Image Processing A 61527 May 2006 19 2 Access the Setup tab and click the Lock Camera button xi Imagina Paper Compression Dropout Multifeed Options Setup Info Package Configure Curre
79. talled the Kodak Driver Software do that now before proceeding The following instructions explain the connection of the USB cable between your scanner and PC You need to identify the USB port on your PC If you installed a USB 2 0 card use that port otherwise use the USB port on your PC The USB cable supplied with your scanner has two different ends 1 Attach the B end of the USB cable to the scanner USB port located on the back of the scanner 2 Attach the A end of the USB cable to the proper USB port on your PC A 61527 May 2006 13 SCSI connections IMPORTANT Be sure the PC is off while you are doing the steps in the SCSI connections section Connect the SCSI signal cable as shown below 1 Attach a SCSI cable to the SCSI port NOTE There are two SCSI ports on the scanner This is a SCSI II pass through connection Plug the SCSI cable into either port using a 50 pin high density connector to connect to the scanner 2 Attach the other end of the SCSI cable to your PC SCSI port SCSI interface device ID Kodak does not recommend several devices on a SCSI chain with our scanner However if there is more than one SCSI device on the chain you may need to adjust the SCSI ID selector on the scanner This selector assigns a specific device ID to the scanner If the assignment conflicts with an existing SCSI device select a new ID NOTE The factory SCSI ID setting for the scanner is 6 SCSI ID 0 is usually
80. te a form s background so that a document management system may automatically through OCR Optical Character Recognition and ICR Intelligent Character Recognition technology read pertinent data without interference from the lines and boxes of the form You can select the desired dropout color and alter the filter threshold and background Color Dropout Background Value 45 Threshold Value s IE O Electronic color dropout is available only for binary and grayscale images Dropout Color the i55 i65 Scanners can drop out red green or blue None is the default Background Value this value will be substituted in the grayscale pre thresholded image for the color being removed Therefore this value should be higher than the threshold value selected on the Scanner Settings dialog box for this pixel to become the background color The default value is 245 For example if you are scanning a white document with a green form and you have selected a binary threshold value of 127 you should choose an electronic color dropout background value greater than 127 so the substituted pixel will be white in the dropped out image Threshold value the value that is used to identify the color which will be dropped out This value is applied to the color area Color with a Red Green Blue component more than the entered value is dropped This setting determines how much of the selected color is dropped out A lower val
81. tes P and Canada China 9 2 Attach the power cord for your power type to the power supply A 61527 May 2006 15 3 Plug the output power cord from the power supply into the power port on the scanner m j 4 Plug the input power cord into the wall outlet Set up the input and Detailed procedures and illustrations for installing and adjusting the output trays input and output trays can be found in Chapter 3 Using the Scanner Following is a brief outline of these procedures to get you started 1 2 3 Lift the input tray to about a 45 angle Pull the input tray wire leg down Place the wire leg on the top of the clips on the flatbed cover and press down to snap the wire leg into the clips Install the output tray by inserting the three tabs on the output tray into the three slots on the automatic document feeder Unlocking the scanner The scanner has a shipping switch that locks the scanner s flatbed camera to avoid causing damage during transportation e Unlock the shipping switch before you power up the scanner Lock the shipping switch before moving the scanner to a new location See the section entitled Locking the scanner in Chapter 5 for procedures To unlock the scanner 1 Place the scanner in an upright position on its front 2 Unlock the scanner by moving the shipping switch located on the bottom of the scanner down into the unlocked position
82. than the size number you select will not be created If you use this option you must specify a blank image size for each image type Bi tonal Gray and Color you want to delete The default for this option is None which means that you will keep all images dialog box Defining the Scan area The Scan Area dialog box is only available for images when the Cropping option selected on the Scanner Settings dialog box is either Fixed to Transport or Relative to Document cropping To access the Scan Area dialog box select Area on the Scanner Settings dialog box Kodak i65 on None Camera Scan Source Page Layout Enable Configure Simplex Letter B5a2llin 7 ilv Front Color ADF Portrait Landscape E Front Binay Dots per inch 200 Color First EE ee irarizatian C Binary First ESE olor Lorrechon Fired Processing FF Text with Pictures kimi Back Lalar Withering None ap Back Binary Cropping f Color First Fixed To Transport C Binary First Threshold MEI IN Eontrast 2 t Henual Automatic RR RR a eee eee B gt m Auta Lighter Normal Darken Mare Copy Cancel Default About Area NOTE Select the side and image to be defined by highlighting Front Color Grayscale Front Binary Back Color Grayscale Back Binary or as appropriate based on the cropping option selected for each of these in the Scanner Settings dialog box The scan areas de
83. to color grayscale images By selecting the appropriate camera and image type you can control the scanner s output When starting the configuration process use the steps below as a guide 1 Check the images you wish to capture Enable camera settings 2 Select the order to transfer the images Color First or Binary First 3 Configure each image by highlighting it Configure Enable camera settings select the desired checkbox to enable the Front Color Front Binary Back Color or Back Binary settings as desired This indicates the images you wish to capture and transfer to the host PC It is possible to capture only rear images Enable your selection by putting a checkmark in the desired box Color First Binary First define the transfer order by selecting the Color First or Binary First radio button This determines which image is transferred to the host PC first when using simultaneous output scanning For example if you are scanning front color and front binary and you select Binary First the scanner will return the front binary image then the front color image A 61527 May 2006 Image Processing settings Configure highlight the image you want to setup As you select the image other options will become available on the Scanner Settings dialog box The availability of these options is dependent upon the selection you make Convert Color to Grayscale this option is only available when configuring color ca
84. trast setting by dragging ilie Contrast sliding bar to the left or right to achieve the desired contrast setting or you can enter a value 1 to 100 in the Contrast text box Scan the document to check the contrast nnn 38 A 61527 May 2006 Threshold used to convert a grayscale image to a bi tonal image The thresholding value is an integer ranging from O to 255 A low threshold value produces a lighter image and can be used to subdue backgrounds and subtle unneeded information A high threshold value produces a darker image and can be used to help pick up faint images Adjust the threshold setting by dragging the Threshold sliding bar to the left or right to achieve the desired threshold setting or you can enter a value 0 to 255 in the Threshold text box Scan the document to check the threshold E ps mmmmmmummE EEEEEEEEEE 200 dpi 80 Threshold 200 dpi 80 Threshold 20 Contrast 100 Contrast Resolution or dots per inch dpi indicates the scanning resolution which largely determines the quality of the scanned image The greater the resolution the better the reproduction However scanning at a higher resolution also increases scanning time and file size The industry standard is 200 dpi about
85. ts allows you to define the area or zone to be imaged Fixed to Transport cropping is used in conjunction with paper size and page layout and assumes you are center feeding your documents If you are not using center feeding you must select the Area button to define your scan area See the section entitled Defining the Scan area later in this chapter Relative to Document zone processing used for batches of same sized documents zone processing is a floating fixed crop window the zone located relative to the upper left corner of a document It allows you to select an area on the document to be delivered in either color grayscale or binary format a separate window for both binary and color grayscale may be defined Different parameters may be selected for both the front and rear of the image This option may be used in conjunction with Automatic cropping where a separate color grayscale or binary area to be saved is desired It is useful in applications where a photograph signature or seal appears in a consistent area for an application you may want that small area in color grayscale and the rest in binary To define a zone select Area to display the Scan Area dialog box See the section entitled Defining the Scan area later in this chapter for more information 56 A 61527 May 2006 NOTES You can scan documents larger than 35 56 cm 14 in and less than 86 cm 34 in in length when the host PC is configure
86. ue will leave more of the selected color in while a higher value will drop more of the selected color out The default value is 175 64 A 61527 May 2006 Scanner Control Selecting the Scanner Control button on the More Scanner Settings dialog box dialog box displays the Scanner Control dialog box x Multi Feed Detection v Length Detection Energy Star v Enable Energy Saver Has Length Units 4 t 15 minutes 1 00 in Inches j E E ri v Auto Set Stop Scanner on Multi Feed Transpart Timeout 3 mi A seconds Blank Image Detection Binay KB ray KB Color EET Sound Alarm on Multi Feed Sound Cancel This dialog box allows you to set multi feed detection and transport control The settings in this dialog box do not affect the quality of the image OK saves the values set on the dialog box Cancel closes the dialog box without saving any changes Multi Feed Detection Length Detection this option can be enabled or disabled The options default is disabled If Length Detection is enabled enter the maximum length This is the minimum length of the document that can be scanned with a multi feed being detected Length detection is used when scanning same sized documents to check for overlap For example if you are scanning 8 5 x 11 inch A4 documents in portrait mode you may want to enter a value of 11 25 inches 28 57 cm in the Maximum Length field Units
87. uplex indicates that both sides of the document will be scanned creating two page images Cameras it is important to understand the concept of cameras the component in the scanner that is used to scan your documents The Kodak i55 Scanner is a simplex scanner The camera has the ability to separate color and bi tonal binary data simultaneously This means it scans one sided documents a front color image and a front bi tonal binary image allowing you to capture one side of a document either in color grayscale or black and white at the same time The Kodak i65 Scanner is a duplex scanner The cameras have the ability to separate color and bi tonal binary data simultaneously This means it scans both sides of a two sided document a front color image a rear color image a front bi tonal binary image and a rear bi tonal binary image allowing you to capture both sides of a document in either color grayscale black and white or a combination of color grayscale and black and white 30 A 61527 May 2006 When you use the Kodak Scan Validation Tool you will need to select which camera s you want to use to scan your document to get the desired results You can use the following examples as a guide when making camera selections Making camera When you launch the Kodak Scan Validation Tool you will be making selections selections on the dialog boxes to set up your images for scanning test documents Both TWAIN and ISIS h
88. utput tray extension wire out to the desire length If you have a large book you want to scan i e telephone book you can lift the flatbed cover to provide easy access to the flatbed Before you start scanning make sure the scanner is on and ready for operation which is indicated by the green indicator light being on and constant Scanning is controlled by software developed for your application To start and stop scanning refer to the documentation provided with your application software A 61527 May 2006 23 Document e A batch of documents to be fed into the scanner must be arranged so preparation the leading edges of all documents are aligned and centered in the input tray this allows the feeder to introduce documents into the scanner one at a time e Staples and paper clips on documents may damage the scanner and documents Remove all staples and paper clips before scanning e Documents should be in good condition Paper Weights 60 g m to 105 g m 16 to 28 lbs Minimum Document Size 9 4 x 14 cm 3 7 x 5 5 in Maximum Document Size e Automatic Document Feeder 21 6 x 86 cm 8 5 x 34 in NOTE Long Paper mode will scan document lengths from 35 56 cm 14 in to 86 36 cm 34 in when the host PC is configured with adequate memory see System requirements for more information regarding memory requirements See Chapter 4 Image Processing for more information regarding Long Paper mode Flatbed
89. ver the ADF automatic document feeder lifts up to provide access for maintenance and jam clearance Output tray collects the scanned documents Output tray extension pull out this extension when scanning documents longer than A4 8 5 x 11 inches 18 A 61527 May 2006 Under the flatbed cover ADF Inside view Reference mark Glass platen Reference frames Pa Reference mark position the document you want to scan up against the reference mark to ensure the entire document will be scanned Glass platen place the document face down on the glass platen for scanning Reference frames these reference frames located around the perimeter of the glass platen provide a reference as to where to align the document on the flatbed gt E Feed module Rollers b Release tab Imaging area Paper Feed roller Release tab ta v j j EE k i hy 1 N 2 i k r BPS d RN k a d n k 1 3 EU di 4 N id i P er s L i ru i 1 k i W SN F a r F O N m a ES DUNS x a ait i a Ook j A dew be vy 7 f 7 m e A r q a E B E i j _ Oi Feed module provides smooth document feeding and separation of various sizes thicknesses and textures of documents Rollers provides smooth document feeding of various sizes thicknesses and textures of documents Release tabs use these tabs to release the Paper Feed roller cover wh
90. white paper background When using Adaptive Thresholding Threshold and Contrast may be adjusted Contrast values may range from 1 to 100 A Contrast value of 100 is considered fully adaptive thresholding ee i mmEEEEEEEEE tel ba N Tm INL EA A LS porot io abedetgl Fixed thresholding ATP disabled ATP enabled 58 A 61527 May 2006 Dithering a method used to simulate gray levels When selected the Dithering options are available 64 Level Bayer Dither 64 Level 45 Degree Clustered Dot Screen and 64 Level Dispersed Dot Screen these represent alternative screening options to emulate gray Contrast sets the image contrast by adjusting the difference between black and white thereby making an image sharper or softer Contrast is only available for binary images In a low contrast setting the difference between black and white is small so the image is softer In a high contrast setting the difference between black and white is large so the image is clearer Select a contrast value from 1 to 100 The default is 50 ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnoparstuvwxyz 1234567890 Modern Contrast 60 ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklImnopqrstuvwxyz 1234567890 Modern Contrast 100 cABECDEEGHIJKEMNOPORSTUVWX o p exer deri oie EQ RR RA eg pera E TUE a abcdefghij i kimno pg rstuvwxyz 2123456 1800s AN Manual is always selected for binary
91. y be inserted in the feeder after the scanner is powered up and ready If you place documents in the input tray before the scanner is powered up the documents will be fed but no images Will be displayed Be sure that the text side of the documents are placed toward the feed tray not facing you For more information see the section entitled Scanning your documents in Chapter 3 A 61527 May 2006 79 Problem Possible Solution Image has clipped corners If your images have clipped corners the skew angle was too large for the cC ee scanner to handle Be sure documents are placed in the input tray with the edges aligned and the side guides positioned correctly to accommodate the size documents you are feeding to avoid large skew angles e f you are scanning large stacks of documents separate the documents into smaller stacks Images are not being cropped correctly If auto or aggressive cropping is enabled and your images are not being cropped correctly clean the white background strips in the imaging area e See the procedures in Chapter 5 Maintenance Cleaning the imaging area lf you are scanning images that are smaller than 9 4 x 14 cm 3 7 x 5 5 in documents may intermittently be cut off Do not use auto or aggressive cropping Roller marks appear on the document Clean the rollers See the procedures in Chapter 5 Maintenance after scanning Images have black background bleed When s

KODAK i55 and i65 Scanners, User's Guide, A-61527

Contents

Download Pdf Manuals

Related Search

Related Contents