User manual
Contents
1. amp Red can respectively be configured to indicate gt Missed call f gt Low battery or it can be disabled by setting it to elim Note the charger LED only indicates if the handset is connected to the charger 3 4 Security The key lock feature can be set by selecting menu Matis SI eye ile 2205 ele The current used setting is displayed when highlighting the menu Automatic key lock A list of selectable timeouts options from Off to 5 minutes is available The keys will automatically be locked when the selected Key Lock Timeout has expired without any input You have to unlock the keys by pressing Ed and entering the PIN code Only emergency numbers e g 911 or 112 can be called without the user has to unlock the keys In E SE H the handset security PIN code can be changed Henri DEPAEPE SAS France 3 5 Handset name The handset name can be changed by selecting menu Kai A 5 T 1 uel An editor is displayed when entering the menu The handset name is typed in by using the numeric keys and afterward saving the name The handset name is displayed on the idle display 3 6 Reset settings The handset name can be reset to default settings by selecting menu KAWA sade The base is not reset to default when selecting this feature The handset is still registered after a reset 3 7 Status The menu yay Se delivers some useful information to the end user The displayed information s are Base stat2. activity when enabled the handset do not react 4 Audio Settings menu 4 1 Ringer volume The ringer volume settings can be adjusted by selecting menu WATI Salads 9 15T Ve Ts The current used level is displayed when entering the menu The volume can be increased by pressing navigation key Up or Right The volume can be decreased by pressing navigation key Down or Left An audible indication play back is given when adjusting the ringer volume The currently used ringer melody is used as play back when adjusting the volume NOTE The ringer is switched off when the lowest level is selected in menu Audio settings Ringer volume The ringer OFF icon is displayed in the top bar 4 2 Ringer melody The ringer melody can be changed by selecting menu MAT Saat 6 15T WATST A list of melodies is displayed when entering the menu Each displayed melody on the list can be selected by pressing soft key Each melody on the list can be played back by pressing soft key This option changes to during play back 4 3 Alert volume The alert volume can be adjusted by selecting menu MCI yaad E a 9 Ve ltrs The current used level is displayed when entering the menu The volume can be increased by pressing navigation key Up or Right The volume can be decreased by pressing navigation key Down or Left The currently used alert melody is used as play back when adjusting the volume 4 4 Alert tone Different kind of AO ey aa fay t5 AA EAE Can be
3. option soft key to automatically hold the second call and recover the first one Press again to switch between lines 1 and 2 6 Ending the active call by pressing the k On hook key automatically recovers the call on hold as active You have to press Red key again to terminate this call Fi E M iF 1 ept Line 1 EF Typing call 7 Sales Dept Line 1 Line 2 i ai i Transfer Esther Esther 7338 I Sales Dent 4 1 OO O 1 Line 2 Thursday 01 01 1970 Connected FP Swap Conf Transfer Henri DEPAEPE SAS France 1 8 Managing calls with PBX integrated DECT System Alcatel Aastra Ericsson When Partner RX handset is directly registered on existing PBX integrated DECT System call functions like hold retrieve swap transfer and conference are directly handled by PBX itself Functions availability highly depends of PBX type settings and account rights You shall consult PBX documentation and or your phone system administrator to know exactly how to access these functions For example Alcatel OmniPCX Office OXO Make a 2 Transfer a call Terminate an Swap between Conference Call hold the on hold to the active call and active call and call by adding first one active one Retrieve the on hold call on hold call to on hold one as an active one Alcatel OmniPCX Enterprise OXE Aastra Matra Nexspan active Dial the Press the boy Press the CR P
4. selected The alert tone is used when the alarm clock occur Each melody on the list can be played back by selecting soft key Play This option changes to during play back 4 5 Vibrator In ACESA EE different options can be selected The options are f gt Vibrate then ring gt Vibrate only gt Vibrate and ring 4 6 Key sound The dI OR i N axel lived can be Wee ee Sle Or ey ea RET IN A sound is generated on each key press when the key sound Click or Tone are selected No key sound will be generated when pressing the keys during key lock state even though one of the key sounds is selected 4 7 Confirmation sound When the feature UCHIGA WAO STRIS celta is enabled On an audible indication is given when an event succeed or fail Example A positive confirmation sound is generated when a new setting is set or an entry is saved successfully in the phonebook A negative confirmation sound is generated if the action fails Henri DEPAEPE SAS France 10 4 8 Coverage warning When the feature MATHIS fit 3 ele Fes leniaad is enabled On an audible indication is given in the earpiece when the user is close to maximum range 4 9 Charger warning When the feature LIIS aay 3 SEAE iS enabled On an audible indication will be given to confirm that the handset is correctly connected to the charger 5 Connectivity menu A 5 1 Registration with Partner TX antennas system The handset can be register
5. 1 J a Sales Dept Line 1 Sales Dept Line 1 Typing call S Line 1 Line 2 Esther Esther 7338 Connected 2 Hold la Transfer Transfer 00 01 Thursday 01 01 1970 7338 Connected Swap Conf Transfer Henri DEPAEPE SAS France 1 6 Call conference with Partner TX Antennas system 1 While Connected press the JEM option soft key to put the call session on hold as handset line 17 2 Then enter the transfer destination number and press the E Off hook key 3 This establishes a second call session as ande 9 4 While connected with line 2 you may press option soft key to establish a conference call between all dialed parties 5 The conference is owned by the first call session as handset line 1 Jept Line 1 WT Typing call 1 Sales Dept Line 1 dept Line 1 Line 1 Line 2 Line 2 Esther 7338 7338 Conf Hold Calling Cee onference Pl oap F Transfer 2 i Transfer Conf Transfer F 1 7 Handling 2 calls Hold Retrieve Swap with Partner TX system 1 While Connected you can make a second call by holding the first one Press the Hold option soft key 2 The first call session is on hold as handset MASK You can recover the call by pressing the option soft key 3 Then enter the transfer destination number and press the C Off hook key 4 This establishes a second call session as handset pN 4 5 While connected with line 2 you may press WYE
6. A EAA ETARE 9 3 6 Reset settihgS sisirain rnense tora eai a a aa Ea a aE E E EGE 9 3 7 StatUS ooru iinei ia ae e dene AEA ea aaea ia Ea Avene AAN ies 9 3 8 AUTOZANS WEN iesite ninne eia aeina aia aeia ie aaia AERE ii EEE 9 3 9 i Silent charging eena T 9 3 10 Donor distur D irar AEA OE OO 10 4 Audio Settings menu CO 10 4L RINGER VOLUME narerereraseran naia a 10 42 Ringer Melody sers een naese aae e a ee Ea orea eee esta ace 10 ne CALC VOLUME A E N E E N E 10 AA Aert TONE eoero aair sN EA Giller EEA E E A 10 45 Vibrator T 10 AG Key Sounders reie drea NE EEA i ORE EEE Eat 10 47 Confirmation Sourd ssi scccevesscecavesonssesessactesssenscesssscica ranea aN SA Ai 10 4 8 Coverage eT da Te T sses erene ree EEan E EEEE E EEEE ER EROA e 11 49 Charger warning sereia ree Eana Eee EEE E ER RES 11 5 Connectivity menu 11 5 1 Registration with Partner TX antennas SYSt M ccccsesssececeeesessssseeeeeseesees 11 5 2 Deregistration with Partner TX antennas SYSteEM ccssccccececessssssteeeeeeeeeeees 11 5 3 Registration with other PBX integrated DECT System Alcatel Aastra Ericsson cece seaccsveacecuessscaeuevacededesaseacsyvaadecdeescceauteskededeesteannvess 11 6 Useful informations cccccccsceccccccccccccececcecece L2 6 1 Contents Of Packager TT 12 62 Installing tHE Battery eseese ereen re aee aaea S 12 63 Using the Charger siise n e Bas e e e e 12 G 4 Handset featuresicisicctissiccetevecee dices e
7. Dep wr E Partner HIA DECI Handset User manual Depaepe 1 Manage your Calls ccccssssssscccsssssssseeeseeees ale lll 1 1 INCOMING Call S ic2 a ccciesscckeecceecceskoecateack dh ladieesesebdedes sad dencattadbesccden Roars 3 S T2 lt d TTT 3 L PM 1 SENG al calore O OA aassitecias chanel 3 m 2 new messages 1 4 Basic call transfer with Partner TX Antennas system sese eee eee eee eee 4 lt lt 1 5 Transfer a call to a 2 call with Partner TX Antennas SYSTEM eee 4 1 6 Call conference with Partner TX Antennas SvStem see ee eee eee e 5 1 7 Handling 2 calls Hold Retrieve Swap with Partner TX system 5 1 8 Managing calls with PBX integrated DECT System Alcatel Aastra Ericsson srren a 6 2 COMMON USEC cccccccccccccccccccccccccccccccccccceccces 7 S sCAN NOB T 7 2 2 Contact list Phonebook see 7 2 3 Speed dial One touch memory sss sese sese eee ee 7 E H 1 1 iccece iets E E E evades seeacelvesusineniects coves sveustieencetessmueustens 7 25 AMOS AIC TT 7 2 6 e T 7 K JR lt T TR as s TT nsciis eoe etar a aeiae ieat 7 2 8 Auto SEAN BY sisarensa a saasaa aai aana daa 7 29 LOW Batteny seene T 8 2 10 Out of Range Alert sss 8 Henri DEPAEPE SAS France Ae 3 General settings menu E Taar Bel TIMES Cate TH 8 32 languag Esener aaier eae E Ea E EEEE EEE AEE Eo aE RRE e EEEE 8 33 LED SIENAN seio e oaeee e e ea e aa e E E 8 E E e Ie a 8 35 Handset NAME osa niire reana ioe cadet cael EE
8. andby when no user input is received within a given timeout Henri DEPAEPE SAS France 2 9 Low Battery The Handset has visual and audible indicators to warn of low battery condition The battery low alert tone will be emitted every 30 seconds The Battery status Icon in the display will change to battery low Battery Full s 100 Battery Level 2 MM 32 to44 Battery Level 1 20 to 32 Battery Level low 10 to 20 Battery empty m 0 2 10 Out of Range Alert The handset will display Searching when the handset is out of range An audible warning will be given in the earpiece If Coverage warning is enabled during call when the user reaches the maximum range The warning will be given in such a way that you will have time enough to move back in range before the call is terminated 3 General settings menu 3 1 Time amp date The time amp date settings can be changed by selecting menu AiO So ui Ea Cee In C R RILE 121553129 the preferred time format 24 or 12 hours can be selected In eee Seyi the preferred date format dd mm yyyy can be selected 3 2 Language The Language settings can be changed by selecting menu Saito So EAE The current used language is displayed when highlighting the menu Language 3 3 LED Signal The LED on the handset has 3 colors and the behavior of each color can be changed by selecting menu Settings gt Led signal Each C S KRI Green Yellow
9. ed by selecting menu Connectivity gt Register The user will be prompted for an Access code Base registration PIN before the registration procedure is started The Access code PIN is default 0000 and cannot be changed via the handset The Access code PIN can only be change via the web interface on the base 5 2 Deregistration with Partner TX antennas system The handset can be de registered by selecting menu 9 92719 Ui TE 5 Pes 3 227 99 You will be prompted for a PIN code Base de registration PIN the PIN code is default 0000 and cannot be changed via the handset Then the warning message 2521222 6221 5212121 5E will be displayed and you have to accept by pressing soft key or soft key No to cancel the operation 5 3 Registration with other PBX integrated DECT System Alcatel Aastra Ericsson Partner RX handset can be registered on the following system ALCATEL OmniPCX Office Enterprise 4400 OXO OXE 4400 AASTRA DECT over IP AASTRA Nexspan SME VOIP for SIP PBX like Asterisk 3CX Press the menu key select the connectivity menu D Go to KEJL Te I MLE you will be prompted for a PIN code the default PIN code is 0000 Then select a PBX system from the list displayed The handset will reboot automatically ALCATEL OXWOXE AASTRA P DECT After reboot go to KESE i e E you will be prompted again for a PIN D AASTRA NEXSPAN 7 code 0000 by default Handset will regist
10. er on the system Henri DEPAEPE SAS France 11 6 Useful informations 6 1 Contents of Package e 2x mounting screws and 2 x Anchors e 1x Handset hook e 1x A C Adaptor e 1x Battery e 1x charger e 1x Handset Unit 1 x Battery cover 6 2 Installing the Battery e Never dispose battery in fires otherwise it will explode e Never replace the batteries in potentially explosive environments for e g close to inflammable liquids gases e ONLY use approved batteries and chargers from the vendor or operator e Do not disassemble customize or short circuit the battery 6 3 Using the Charger Each handset is charged through the use of a handset charger The charger is a compact desktop unit designed to charge and automatically maintains the correct battery charge levels and voltage The charger Handset is powered by AC supply from 110 240VAC that supplies 5 5VDC at 600mA When charging the battery for the first time it is necessary to leave the handset in the charger for at least 10 hours before the battery is fully charged and the handset ready for use For correct charging ensure that the room temperature is between 0 C and 25 C 32 F and 77 F Do not place the handset in direct sunlight The battery has a built in heat sensor which will stop charging if the battery temperature is too high 6 4 Handset features e Wideband Audio G 722 e 2 TFT display with graphical user interface 176 x 220 pixel 262K color e We
11. ion Handset status Software version Software version Hardware version Hardware version IP address DECT band MAC address Battery level System name IPEl 3 8 Auto answer The feature can be selected via menu Maa Ses ieee The user must always press Green key Off hook to answer a call The call is not answered by removing the handset from the cradle charger gt Any Key Pressing any key will answer an incoming call The call is not answered by removing the handset from the cradle charger gt Automatic If the feature Automatic is enabled on the handset then the incoming call is answered automatic after 5 seconds 3 9 Silent charging The feature Silent charging can be set by selecting menu Sass 11 L 1 911931 5T9 Handset must be placed in charger in order to work as mentioned below The options of silent charging are The handset is ringing when receiving incoming calls audio alert and incoming call screen displayed P gt Disconnect The handset doesn t react on incoming call no audio alert and no incoming call screen displayed gt Silent The handset reacts on incoming call but the handset doesn t ring no audio alert but the incoming call screen displayed Henri DEPAEPE SAS France 3 10 Do not disturb The feature Do not disturb can be set by selecting menu WiN A RIR leis GT When disabled the handset reacts on all incoming
12. l be dialed If the Work number is not defined then the Mobile number is dialed etc To assign speed dial number to a contact 1 Go to the contact list gt Move to the contact that you want to assign a speed dial number to 2 Select More gt Select Speed dial 3 Move to the speed dial number 2 9 that you want to assign the contact number to 4 Select Add The contact name is appended to the speed dial number 2 4 Mute Press mute key on the left side of the handset during talk mode The Mute icon will be turned on Pressing mute key again will cancel mute condition 2 5 Hands free The audio is routed to the speaker if the user press Hands free key G during call Pressing Hook off key E will switch back to earpiece mode 2 6 Headset The audio is routed to the headset if a headset is connected when initiating the call The audio is routed to the headset if a headset is connected during call The audio is routed to the speaker if the Hands free speaker key is pressed during headset mode 2 7 Volume setting There are 3 individual volume settings for earpiece mode for speaker mode for headset mode The volume setting can be adjusted during call by pressing the volume keys and on the left side of the handset The level of the audio is displayed graphically when pressing the keys and saved automatically after a timeout 2 8 Auto Stand by The handset automatically returns to st
13. ll proven graphical MMI with wallpapers e Polyphonic ringtones e LED status indication e Phonebook 200 central and 100 local entries e GAP and CAT iq compliant e Headset connector 3 5mm e SW upgrade over the air e Wideband two way speaker phone mode e Vibrator e Battery Talk time gt 18 hours Standby time gt 200 hours e HAC earpiece All trademarks and brand names mentioned herein are the property of their respective owners The listed brand names and model designations are intended only to show the compatibility of Partner RX DECT Handset with existing PBX Henri DEPAEPE SAS France 12
14. nnas system 1 While Connected press the Hold option soft key 2 The call session is on hold 3 Then enter the transfer destination number and press the option soft key The transfer process is not finished until the transfer target is reached you can recover the call by pressing the option soft key 4 While the call session is established with transfer destination number the handset automatically returns to idle mode On hook 1 1 L J 3 Sales Dept Line 1 Sales Dept Line 1 Typing call DE O 1 Thursday 01 01 1970 Esther Esther 7338 Connected Hold W e Transfer Transfer NOTE Using basic transfer mode transfer target s contact informations are sent to the transferee His handset use it to attempt to call target s destination number The provided contact can be used to make new calls in the future 1 5 Transfer a call to a 2 call with Partner TX Antennas system 1 While Connected press the Hold option soft key 2 The first call session is on hold as handset line 1 3 Then enter the transfer destination number and press the E Off hook key 4 This establishes a second call session as handset KKS 5 While connected with line 2 you may press MICUGGA option soft key to transfer the first call hold on line 1 to the second call established on line 2 6 While line 1 and line 2 are bridged handset returns to idle mode On hook
15. ress the 3 Press the 4 number On hook key Numerickey numerickey numeric key Dial the Press the Koy Press the CN Press the Press the 3 number On hook key numeric key numerickey numeric key ky Press Flash Press Flash Press Flash Press ENM Press the ugn gR numeric ER numeric EY numeric ar number On hook key key key key Henri DEPAEPE SAS France 2 Common use 2 1 Call log The handset has a call log which is grouped in 4 lists All incoming outgoing missed Any list can be used for dialing Access the call log by pressing the menu key and select the Calls menu J 2 2 Contact list Phonebook Partner RX handset provide a local phonebook with 100 entries Access the call log by pressing the menu key and select the Contacts menu Es 2 3 Speed dial One touch memory The speed dial feature allows you to assign a speed dial number 2 9 to a contact So you can call a contact by making a single long key press gt 2 seconds on one of the number keys 2 9 NOTE The 1 key is reserved for voicemail Long key press on 0 is used for starting a normal dial string with The first defined number of the contact will be dialed when the speed dial key is pressed This means that if all numbers Work Mobile Home amp Other for the contact is defined then the Work number wil
16. ts eden EEA hice etd 12 Henri DEPAEPE SAS France 1 Manage your calls 1 1 Incoming calls 1 While ringing the incoming call screen displays the caller ID name and number 2 You may answer by pressing the E Off hook key Incoming calls are stored in the call log gi Sales Dept Line 1 Sales Dept Line 1 7399 7399 Alerting Connected NOTE If the feature Auto answer is enabled on the handset then the incoming call is answered no matter of the handset is placed or removed from the charger If Auto answer is disabled then you have to press Green key no matter of the handset is placed or removed from the charger 1 2 Outgoing calls 1 Starting with Idle mode 2 Simply pre dial the phone number it is also possible to select any numbers from the call log or from the phone book Outgoing calls are stored in the call log 3 Then press the E Off hook key 1 L C OO J O E Typing call Sa ept Line 1 Thursday 01 01 1970 Registration 0 2275 E Connected sther 1 3 End a call Simply press the k On hook key to terminate any call NOTE If one call is active and another call is on hold then the active one will be terminated when pressing Red Key and the handsets automatically returns to the call on hold The call on hold is now active you have to press Red key again to terminate this call Henri DEPAEPE SAS France 1 4 Basic call transfer with Partner TX Ante
Download Pdf Manuals
Related Search