Porsche09 Interface installation manual-V20
Contents
1. we a JEI FE fa on SR lt S 5 i HR aW lt Sz para om Ay Eo A 5 M f DVD CAMERA in J E fat cs op EIR A AEN eee RGB NAVI in PNO Si TE Abit DIP switch z gt NE 1 ON RGB input Enabled N G3 e 2 ON AV1 in enabled 3 ON AV2 in enabled A 4 ON Original CAM exists Oe eit o AYN T ae eS ECE z uvol 0 When 4 ON Green iE un n A wire reaches 12V will force the input to car Touch panel sockets for inserted Navigation pee ORS video When 4 OFF from left to right ae A E m green wire goes to To extra NAVI to original socket To original 6 6 m Rome AAT oa 12V will force the touch panel input to AV4 3 Wire input location There are an original hole on the rear side which all the wires connecting this daughter board can go out this hole is for Xradio antenna socket in the US version even when the antenna socket is there there is still enough space for2. this video inserter is suitable for Porsche Cayenne 911 O9versions 1 Monitor removal from the car As shown by the arrows in the left picture remove the plastic part around the monitor no screws only hooks then the 4 screws that fixing the monitor to the chassis can be seen Remove these 4 screws Yellow arrows below then the monitor can taken out all modifications are done on this monitor p U 0 0 bo 0 eo al es 5 amp fs ees r 7 a er 66747 18796380Q RISI gt Remove the 2 screws on the top shell of the monitor then the CD changer part can be taken down the interface board can be placed at the yellow square like the picture is showing there are 2 empty screw holes there which the interface board is exactly fitting there These 2 screws are originally used for XRadio in US So for the US version Porsche there is a Xradio tuner there then the inserter board can be placed on top of that tuner fixed there with glue type 1 4 Power wire KESSA Black to GND GREEN rear view camera trigger 2 Connections Power Wires input
3. T when there is CAN activity ACC 12V which might be provided for other devices like added DVD NAVI or CAMERA CAN box s output trigger wire should be connected to this white line 5V or more then switch 4 4
4. all the wires to go out gt Xradio satellite radio which is available in north America continent 2 4 Original ribbon cable should be modified 4 Input port switch There are 2 options to switch the input 1 By using the keypad button attached on the cable which is standard accessory 2 By using the can box then when the user press the VOL key on the steering wheel the interface switches 5 Touch panel connection The original touch panel can be re directed to an extra device especially after market NAVI If NOT necessary Please do NOT use the 2 4Pin wires Then the touch screen is always for car original applications 5 Accessories 1 Video inserter board with one 40P ribbon cable 2 Power input wire with filter box 3 RGB input wire 1PC CVBS input wire 2PCs 4 Touch panel 4P ribbon cable one with socket socket converter the other with 4P socket 5 Can switch box Optional 3 4 6 CAN box connection should be connected to the Quadlock connector behind the monitor Attention the steering wheel key would be effective only after key inserted CAN to CANbox orange blue wire CAN to CAN box orange Gray wire Gray wire to CAN Box black wire GNDI CAN box output SWITCH line when VOL key pressed then 5V should be connected to the white line as in the Note CAN CAN wrong connection will not damage anything reconnect then it works picture below WEE OU
Download Pdf Manuals
Related Search