User Manual - Billiger.de
Contents
1. Directive on Waste Electrical and Electronic Equipment Directive 2002 96 EC effective from August 13 2005 states products of electrical and electronic equipment no longer may be discarded as municipal waste Please refer to your Original point of purchase for instruction on the correct procedure of discarding as municipal waste It is the sole responsibility obligation of the local authorized reseller distributor of such covered electronic equipment to take back such products at the end of their useful life For better environmental protection waste batteries should be collected separately va for recycling or special disposal 96 HIGH DEFINITION MULTIMEDIA INTERFACE FCC Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Note The manufacturer is not responsible for ANY interference for example RADIO or TV interference caused by unauthorized modifications to this equipment Such modifications could void the user s authority to operate the equipment Df2. S SAPPHIRE User Manual Sapphire EDGE VS Series Mini PC 1 Product Specifications tem AMD Radeon HD7400G AMD Radeon HD7600G WIFI BT Built in WIFI supporting IEEE 802 11 b g n BT 3 0 1x Mini DisplayPort 1x HDMI 1x RJ45 2x USB 3 0 Ports 4x USB 2 0 Ports 1x Audio out 1x MIC in 1x SPDIF out Power AC100 240V 50 60Hz DC19V 3 42A 65W ee Operating System Pre installed with FREE DOS Supports Win8 Win7 Vista z Important information for your safety and comfort Please read these instructions carefully before using the product and save for future reference e Ensure that the Mini PC is turned off and disconnected from the mains supply before cleaning e Do not use liquid or aerosol cleaners a damp cloth should suffice e Insert the power connector into the Mini PC before plugging the mains cable into the AC power outlet e When you need to disconnect power to the equipment unplug the power cord from the AC power outlet before removing the power connector from the Mini PC 2 Product Overview OS O 6896 OO Features Power Switch To switch the Mini PC ON or OFF Front USB3 0 Ports remove cover To connect USB devices D MMC Connector To insert SD MMC memory cards The light will glow white when the Power Indicator light and HDD power is on and will flash when the Wi Fi Activity Indicator hard disk orange Wi Fi green is in use un Mini Display port To con
3. a Root port it is 100ms for a Hub port the delay is taken from Hub descriptor Options Auto Manual 15 Mass Storage Devices Mass storage device emulation type Auto enumerates devices according to their media format Optical drives are emulated as CD ROM drives with no media will be emulated according to a drive type Options Auto Floppy Forced FDD Hard Disk CD ROM gt H W Monitor GS PPhIRE www sapphiretech com CPU Fan Mode Setting SmartFan CPU SYSTEM Displays the current CPU and system temperature CPU Fan Speed Displays the current CPU Fan Speed VCC3V CPU VCore FCH POWER VDIMM CPU NB CPU VDDP VSB3V VBAT The current voltages are automatically detected and displayed by the system CPU Fan Mode Setting This item controls the speed of the various fans on the motherboard SmartFan When you want the speed of the fans automatically controlled based on temperature Manual By DutyCycle To set the fan speed to a constant rate the speed from 0 to 100 Manual By RPM This item can manual RPM count setting 16 gt Onboard Device A mie wWww sapphiretech com HD Audio Azalia Device Enabled HD Audio Azalia Device Enables the onboard High Definition Audio controller Options Auto Enabled Disabled Onboard LAN Enables the onboard Giga Lan function for LAN Options Enabled Disabled WLAN Module Control onboard Wireless function Options Enabled Disabled SD Ca
4. reduce power consumption Options Enabled Disabled Restore on AC Power Loss Enables your computer to automatically restart or return to its last operating status after power returns from a power failure Options Power off Power on Last State 12 D CPU Configuration S PPhIRE Www sapphiretech com AMD Cool n Quiet Enabled AMD Cool n Quiet Cool n Quiet is a CPU speed throttling and power saving technology by AMD Options Enabled Disabled PSTATE Adjustment Allows you to adjust startup P state level Options PState 0 PState 1 PState 2 PState 3 PState 4 PState 5 PState 6 PState 7 PPC Adjustment Allows you to adjust PPC object Options PState 0 PState 1 PState 2 PState 3 PState 4 NX Mode Enable or disable No execute page protection function Options Enabled Disabled SVM Mode Enables the CPU SVM Secure Virtual Machine function Options Enabled Disabled AMD Core Performance Boost Allows you to disable AMD Core Performance Boost Options Auto Disabled C6 Mode Allows you to select C6 State for processor Options Enabled Disabled 13 gt CPU Information Displays the CPU related information AA al aee Www sapphiretech com gt SATA Configuration 5 N mie www sapphiretech com OnChip SATA Type AHCI OnChip SATA Type Allows you to set the onboard Serial SATA type Options AHCI Legacy IDE e Legacy IDE Mode Use the SATA hard disk drivers
5. thock Need support V 0 sdf 1 i a TWACHO0 10 Per sR Pri f Chin Su SLE OU ADUUAO OO LAA UE STI200 TOZO O00 2004 109 O00 LANA OE ON MOUNN PN 9YG142 500 LAN MEN AN A OU AU A FW 00018500 LANDA OUOU OWED ONAN OPA UNE A UE DOM 03 2017 HDO Mig by Seagate Technology LLC Hard Drive Note MANUE OCZ I VOLS YOHS0 71400 EZE WLM OVN LULU Cooler Memory Module Picture is for reference only actual board may be slightly different 5 Configuring the BIOS This chapter provides information on the BIOS Setup program and allows you to configure the system for optimum use 5 1 Select Boot Device Select Boot Device Menu allows you to set the first boot device without entering BIOS Setup During Power On Self Test POST you can press the lt F7 gt key to enter select boot device menu The system will directly boot from the device configured in Boot Menu S PPHIRE www sapphiretech com C D I Qo PO WDC WD3200AAKS 00VV3A0 Enter Setup _F3 Optimized Defaults 5 2 Enter BIOS Setup The BIOS is the communication bridge between hardware and software Correctly setting the BIOS parameters is critical to maintaining optimal system performance Use the following procedure to change BIOS settings 1 Power on the computer 2 Press the Del key when the following message briefly shows upon the bottom of the display during Power On Self Test POST Press F1 to continue DEL to e
6. Enable Enab le Update BIOS from Drive fsO SOOG DATA __ SRECYCLE BIN kavo killer KYMP laron A R 1904 7 Ca N SRECYCLE BI CANCER American Megatrends 24 Steps After saving BIOS file is completed Select lt Esc gt to return Exit tab of BIOS setup Enable Update BIOS from Drive a E pe a Saving current BIOS to a75044 RE MM Warnings Do not use this product near water or a heat source such as a radiator Do not place this product on an unstable stand or surface If the product falls it could be seriously damaged The ventilator on the enclosure is used for air convection and to prevent the equipment from overheating Do not cover the ventilator Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind onto or into the product To avoid damage of internal components and to prevent battery leakage do not place the product on a vibrating surface Keep this equipment away from humidity and high temperature Do not operate the product in a location that is subject to an ambient temperature above 35 C 95 F or below O C 32 F Avoid using a cleaner containing alcohol or acetone to clean the equipment Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommen
7. as Parallel ATA storage devices e AHCI Mode Use the AHCI Advanced Host Controller Interface to enable advanced SATA features for improved performance with NCQ and Hot plug features SATA Port 0 This field shows SATA port connection state 14 gt USB Configuration S PPhIRE www sapphiretech com Vel Jelpierciel 1 Legacy USB Support Enabled aj a v i aE LF5 iG LE Legacy USB Support Allows you select legacy support for USB devices Enabled Enables Legacy USB support Disabled Keep USB devices available only for EFI application Auto Disables legacy support if no USB devices are connected USB 3 0 Support Enables USB3 0 XHCI controller support Options Enabled Disabled XHCI Hand off This is a workaround for OSs without XHCI hand off support The XHCI ownership change should be claimed by XHCI driver Options Enabled Disabled EHCI Hand off This is a workaround for OSs without EHCI hand off support The XHCI ownership change should be claimed by EHCI driver Options Enabled Disabled USB transfer time out The time out value for control bulk and interrupt transfers Options 1 sec 5 sec 10 sec 20 sec Device reset time out Sets USB mass storage devices start unit command time out Options 10 sec 20 sec 30 sec 40 sec Device power up delay Maximum time the device will take before it properly reports itself to the Host controller Auto uses default values for
8. ded by the manufacturer Route the power cord in a way that people are unlikely to step on it Do not place anything on top of the power cord Keep any strong magnetic or electrical objects away from the equipment Your device and its accessories may contain small parts Keep them out of the reach of small children 05 REACH Complying with the REACH Registration Evaluation Authorization and Restriction of Chemicals regulatory framework RoHS Complying with the RoHS Restriction of Hazardous Substances regulatory framework Lithium lon Battery Warning Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Dispose of used batteries according to the manufacturer s instructions CE Mark Warning This is a Class B product in a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures CE marking for devices without wireless LAN Bluetooth The shipped version of this device complies with the requirements of the EEC directives 2004 108 EC Electromagnetic compatibility and 2006 95 EC Low voltage directive R amp TTE Directive 1999 5 EC as attested by conformity with the following harmonized standard eArticle Safety eEN60950 eArticle EMC eEN301 489 1 17 eArticle Soectrum Usages eEN300 328 WEEE Statement Under the European Union EU
9. for S_BIOS Flash a D s Step1 Enter BIOS setup screen select S_BIOS Flash Utility item from Exit tab Step2 The S BIOS flash utility allows you to e Update BIOS form Drive please refer to setp3 e Save BIOS to Drive please refer to setp6 Enable Enable Update BIOS from Drive Step3 To Update BIOS form Drive select the BIOS update file and press lt OK gt to start update If the BIOS file stored in USB device please must first insert USB device before turning on the system and make sure the BIOS update file matches your mainboard model Update BIOS trom Orive fsi Removable Media Red OABHNO43 ROM 2048 KB 140VPO40 ROM 2048 KB 140VQ040 ROM 2048 KB 140VS040 ROM 2048 KB 1A0VTO40 ROM 2048 KB o90itest1 ROM 40936 KB TEST2 ROM 40936 KB OABHMO44 RO CANCEL Step4 The update BIOS processing screen appears Enable Update BIOS from Drive American Megatrends 23 Step5 The BIOS update is completed Please press any key to restart the system Enable Enable Update BIOS from Drive American Megatrends Step6 Save BIOS to Drive allows you to save the current BIOS file If the BIOS file stored in USB device please must first insert USB device before turning on the system Save BIOS to Drive Exit American Megatrends Step7 To Save BIOS to Drive Select the stored location and press lt OK gt to start saving BIOS file
10. n be keyed by numeric function keys Year The year can be adjusted by users System Time Allows you to set the system time The time format is lt hour gt lt minute gt lt second gt 10 5 4 Advanced Menu The Advanced menu items allow you to change the settings for the CPU USB and other system devices Press lt Enter gt to display the configuration options lee www sapphiretech com weet Boot amm gt RTC Wake Settings oS pay oe WWW sapphiretech com Wake systems with Fixed Time Disabled Wake system with Dynamic Time Disabled Wake system with Fixed Time Enable or disable system wake on alarm event When enabled system will wake on the hr min sec specified Options Enabled Disabled Wake system with Dynamic Time Enable or disable system wake on alarm event When enabled system will wake on the S5 S4 S3 time Increase minutes s Options Enabled Disabled PE i gt ACPI Settings GS Frise WWW sapphiretech com Enable Hibernation Enabled Enable Hibernation Enables system ability to Hibernate OS S4 Sleep Sate This option may be not effective with some OS Options Enabled Disabled ACPI Sleep State Selects the power saving modes for ACPI function Options Suspend Disabled S3 only Suspend to RAM EuP Function Enables the EuP Energy Using Products function allows BIOS to switch off some power at S5 state to get system ready for the EuP requirement to
11. nect display devices Rear USB 2 0 Ports 7 Audio out jack To connect headphones or speakers l npg To connect a microphone or other Microphone in jack audio source Optical S PDIF To connect digital audio devices ES 2 5 E EA a EJ EX 3 Mini PC Setup and Connections To attach the desktop stand Align stand with the base of the Mini PC and fix with screw provided To connect to a display Connect a display device to the mini display connector located at the rear of the unit To connect to an HDMI display TV Connect the display device to the HDMI connector located at the rear of the unit To connect to a DVI display 1 Connect the HDMI to DVI adapter included with the Mini PC to the HDMI port located at the rear of the unit 2 Connect the DVI monitor to the female DVI port on the adapter To connect USB devices Connect USB devices to the USB ports located both at the rear of the unit and under the cover at the front of the unit To connect to a network Connect the Ethernet cable from your network switch router to the RJ45 LAN connector located at the back of the unit To connect the power adapter Connect the power connector from the supplied power supply to the DC In connector located at the rear of the unit BEFORE attaching the mains power cable to an AC outlet To connect speakers or headphones Connect the 3 5mm audio cable to the Audio Out jack located at the rear of the
12. nter Setup Pressing Del takes you to the BIOS Aptio Setup Utility 8 Notel It is strongly recommended that you do not change the default BIOS settings Changing some settings could damage your computer Note2 The BIOS options in this manual are for reference only BIOS screens in manuals are usually the first BIOS version when the board is released and may be different from your purchased motherboard Users are welcome to download the latest BIOS version from our official website www sapphiretech com 8 Control Keys Please check the following table for the function description of each Control key You can also use the mouse to click your required item 5 3 Main Menu When entering the Aptio Setup Utility the main menu screen appears This main menu includes the system overview and displays the basic system configuration such as BIOS information memory size and system date time SAPPhirRe www sapphiretech com 3 FoI He Lt i ER D Ymca perme EE Advanced Chipset Booi Security Exit System Date BIOS Information This field displays the current BIOS version build date and ID information etc Memory Information Able to display current system memory size System Date Allows you to set the system date The format is lt Day gt lt Month gt lt Date gt lt Year gt Day Weekday from Sun to Sat this is automatically displayed by BIOS Month The month from 1 to 12 Date The date from 1 to 31 ca
13. phics processor Options 32M 64M 128M 256M 512M gt Memory Configuration Memory Clock This item allows you to select different memory clock Options Auto 800M Hz 1066MHz 1333MHz 19 D DIMM Information This filed displays the related memory information j A pet p re WWW sapphiretech com g N Main Preformance Adyanced 5 6 Boot Menu The Boot menu is used to configure the boot settings and the boot priority SAPPHIRE r 1 t Main Advanced Bootup NumLock State Bootup NumLock State This item allows you to selects the state of the keyboard s numlock function after POST Options On Off Boot Option Priorities These options are used to form the boot order and are dynamically generated Hard Drive BBS Priorities Allows configure the boot order for a specific Hard Drive device class gt CSM Parameters Boot option filter This option controls what devices system can boot to UEFI or Legacy Options UEFI and Legacy Legacy only UEFI only 20 Launch PXE OpROM policy This option controls the execution of UEFI and Legacy PXE OpROM Options Do not launch Legacy only UEFI only 5 7 Security Menu The Security menu allows you to change the system security settings c FrFrhire WWW sapphiretech com Main Advanced Chipset Bogi Administrator Password Administrator Password If ONLY the Administrator s password is set then this only limits access to Set
14. rd Reader Mode This item allows you to select SD Card Reader Mode Options Disabled ADMA DMA PIO 247 2 5 5 Chipset Menu The chipset menu items allow you to change the advanced chipset settings Press lt Enter gt to display the sub menu 5 rhal e WWW sapphiretech com oir D a nr ere ce pomme Pope miennes N Chipset D EEE I ERREPA ENERE EE a M DO oefdyanced BC sl Ms EL os Et South Bridge South Bridge gt North Bridge Parameters gt South Bridge 5 7 mile WWW sapphiretech com Chipset gt SB USB Configuration gt SB SD Configuration gt SB USB Configuration XHCI Controller 0 Enables USB3 0 XHCI controller support Options Enabled Disabled gt SB SD Configuration SD Trace Length This item allows you to select the SD trace length inches Options Less 6 Between 6 and 11 Greater 11 18 SD SPEED This item allows you to select the SD speed Options Low High SD Bitwidth This item allows you to select the SD bit width Options 32Bit 64Bit gt North Bridge GS PPhIRE www sapphiretech com Ghipset GFX Configuration gt gt GFX Configuration Integrated Graphics This item allows you to control Integrated Graphics controller Options Auto Force UMA Frame buffer Size This item will only appear when Integrated Graphics item is set to Force option It controls the amount of system memory that is allocated to the integrated gra
15. unit To connect a microphone or other audio source Connect the 3 5mm audio cable to the Line In jack located at the rear of the unit To connect digital speakers or other digital audio devices Connect the S PDIF cable to the S PDIF jack located at the rear of the unit To read media files from an SD MMC memory card Insert the SD MMC card into the SD MMC Connector Notel This Mini PC provides one standard RJ 45 jack for connecting to a Local Area Network LAN Two LEDs are built into the RJ 45 LAN connector These LEDs indicate the status of the LAN A Yellow on ain eed Orange Note2 The system provides a Clear CMOS function which may be helpful once the system is not working normally as usual and can t be fixed by even rebooting the system You can use a small object such as a paperclip pushing into the hole and pressing the button hidden inside for at least five seconds Once the system state is cleared via above operations you need to set up the correct system state by loading BIOS default Another use of this button is when BIOS is updated you need to press this button to clear original settings and then load BIOS default to complete the BIOS update procedure Clear CMOS 4 Mainboard Layout The following figure shows the location of components on the mainboard Momentus Thin 320GB WWN 5000C5004036960A AU AE A UE DA AON C010 EA AN HI UIO do not push en CAUTION er lt a
16. up and is only asked for when entering Setup The password must be 3 to 20 characters long User Password If ONLY the User s password is set then this is a power on password and must be entered to boot or enter setup In Setup the user will have Administrator rights The password must be 3 to 20 characters long 91 5 8 Save amp Exit Menu The Exit menu allows you to load the optimal default values for BIOS and save or discard your changes to the BIOS items SG PPhIRE wWww sapphiretech com B D l oE 9 fm eeS Pee a E vi Main Advanced Chipset Bog A Security i Save Changes and Reset Save Changes and Reset This resets system after saving the changes Discard Changes and Reset This resets system without saving the changes Restore Defaults The restore defaults are the factory settings of this motherboard Save as User Defaults This is used to save all current settings as user default The current setup state can later be restored using Restore User Defaults Restore User Defaults This is used to restore all tokens to settings previously stored by Save as User Defaults Boot Override This group of functions includes a list each of them corresponding to one device within the boot order Select a drive to immediately boot that device regardless of the current boot order S_BIOS Flash Utility This utility allows you to update the system BIOS in embedded BIOS Refer to the following steps
Download Pdf Manuals
Related Search