Home

Handbuch User Manual PreVision Control

image

Contents

1. This manual as well as the hard and Software which it describes is protected by copyright and may not be duplicated translated or presented in any form without the written consent of tci GmbH Windows Windows XP and Windows 7 are registered trademarks of Microsoft Corp Those designation of products and procedures in this publication which are also trademarks have not been expressly stated as such These names are trademarks of the respective trademark owners However the absence of the symbol implies in no way that the designations are exempt from such rights Publisher translators and authors of this publication have carefully developed the texts illustrations and programs However errors can not be completely ruled out tci GmbH shall neither warrant nor be held legally responsible for consequences which occur due to incorrect data Information concerning errors are welcome at any time The information in this operating manual does not guarantee de finite product properties Modifications concerning the support of technical progress will be reserved tci GmbH shall not be held liable for immediate damage occurring in connection with the supply or utilization of the documents In addition we shall not be held liable for any errors found in this pu blication We are not obliged in any way to update the information contained in this document to latest standards All rights reserved e Printed in Germany Printed on chlo
2. Ludwig Rinn Stra e 10 14 e D 35452 Heuchelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 30 von 36 Taster Test X104 Menu X105 Heller X107 Dunkler X106 LEDs Fan1 D210 Fan2 D209 Fan3 D208 Temp1 D207 Temp2 D206 Err1 D205 Err2 D204 Err3 D203 Alle LEDs bis auf D104 gehen an LED Funktionstest ohne Funktion erh hen der Displayhelligkeit verringern der Displayhelligkeit L fter an Kanal 1 hat einen Fehler L fter an Kanal 2 hat einen Fehler L fter an Kanal 3 hat einen Fehler Temperatursensor auf der MCHW meldet bertemperatur Externer Temperatursensor meldet bertemperatur PreVision Control Software meldet Fehler Reserve Reserve lci 6 Operating controls and LED of the hardware Push Button Test X104 Menu X105 Brighter X107 D210 Darker X1 06 D209 D208 D207 LEDs E Fant D210 D204 D203 Fan3 D208 Fan2 D209 Temp1 D207 Temp2 D206 Err1 D205 Err2 D204 Err3 D203 All LEDs without D104 are on LED test of function without function more brightness of display down brightness of display fan on channel 1 has an error fan on channel 2 has an error fan on channel 3 has an error MCHW messages too high temperature external remperature sensor messages too high temperature PreVision Control Software has an error Reserve Reserve Ludwig Rinn StraBe 10 14 e D 35452 Heu
3. PreVision Control Intelligent Condition Monitoring Handbuch User Manual PreVision Control Version 2 0 12 R5 IC Artikel Nr Part No 5400 NIE Gi Inhaltsverzeichnis FUNKTIONSWEISE PREVISION CONTROL HAFTUNG COPYRIGHT A INSTALLATION A 1 TREIBER INSTALLATION BEI W n XP A 2 SOFTWARE INSTALLATION 1 START 12 1 1 STARTEN DES PROGRAMMS 1 2 DIE ERSTEN SEKUNDEN NACH DEM START 1 3 STARTPHASE ABGESCHLOSSEN 2 PROGRAMMOBERFL CHE 2 1 DIE SEITEN 2 2 INFO UND MELDUNGSFENSTER 2 3 DER INFOBEREICH 3 PROGRAMMKONFIGURATION 3 1 Das EINLOGGEN 3 2 KAN LE KONFIGURIEREN 3 3 ALLGEMEINE EINSTELLUNGEN 3 4 Das LOGGEN A PREVISION CONTROL ZEIGT EINE MELDUNG WAS IST ZU TUN 4 1 FEHLERMELDUNGEN BEDEUTUNG UND ACTIONN 5 SOFTWARE UPDATE 6 BEDIENELEMTE UND LED ANZEIGE DER HARDWARE ANHANG A TABELLARISCHE UBERSICHT DER INTERNEN MELDUNGEN BE NEUINSTALLATIONEN Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 2 von 36 00 12 12 12 14 14 18 18 20 20 20 20 22 24 24 28 30 32 List of Content FUNCTION PREVSION CONTROL LIABILITY COPYRIGHT A INSTALLATION A 1 DRIVER INSTALLATION WITH WIN XP A 2 SOFTWARE INSTALLATION 1 START 13 1 1 START OF THE PROGRAM 1 2 FIRST SECONDS AFTER THE START 1 3 END OF START 2 PROGRAM DESKTOP 2 1 THE PAGES 2 2 INFO AND MESSAGE WINDOW 2 3 THE INFO 3 PROGRAM CONFIGURATION
4. This reduces heat particularly in warm environments and extends the life span of the system If desired the graphical user interface keeps the user updated about all details Reduction of the Downtimes Intelligent algorithms adapt the capacity of your system if the temperature comes into a critical range Production can be completely terminated The service takes place in the set up time Smaller wear by temperature controlled fans turns only with the necessary speed Against unplanned Downtimes You can define own threshold values in addition to the manufacturer specific values Thus you are informed by an LED matrix in the future in time a pop up window or diverse alert options plus versi on Additionally you can make necessary spare parts available if responsible You make the change exactly then when it suits you the best The advantage is clearly obvious unplanned down times are avoided Stop during maintenance is not only minimized but becomes even easier to schedule and your production runs More pleasant and costs saving page effect In place of fix service intervals you get service on demand The plus at service With the Plus version you experience a completely new service level If PreVision Control states the fact that a component show irregularities an e mail can be sent directly to the tci service team After short check of the log file the suitable spare part can be sent to you immediately That is our
5. understanding of Security by system Additionally you can transfer all parameters and operating conditions of the industrial computer to your specific environment Therefore you have a floating di stance contact an OPC server and DLL function at your disposal Farther we are always anxious to convert customer s requests like e g the implementation of shock vibration and humidity sensors and access protection by biometric data downtime downtime downtime Operation Operation wlio on W U Warning scheduled maintenance Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 5 von 36 lci Haftung Copyright Redaktion Copyright Warenzeichen Hinweis Haftung Ren Jung tci GmbH Ludwig Rinn Str 10 14 35452 Heuchelheim Deutschland Dieses Handbuch sowie die Hard und Software die es be schreibt ist urheberrechtlich gesch tzt und darf ohne ausdr ck liche schriftliche Genehmigung der tci GmbH in keiner Weise ver vielf ltigt bersetzt oder in eine andere Darstellungsform gebracht werden Windows Windows XP und Windows 7 sind eingetragene Warenzeichen der Microsoft Corp Diejenigen Bezeichnungen in dieser Publikation von Erzeugnissen und Verfahren die zugleich Warenzeichen sind wurden nicht be sonders kenntlich gemacht Solche Namen sind Warenzeichen der jeweiligen Warenzeicheninhaber Aus dem Fehlen der Mar
6. 3 1 THE LOGIN 3 2 CHANNELS CONFIGURATION 3 3 GENERAL CONFIGURATION 3 4 LOGGING A PREVISION CONTROL HAS A MESSAGE WHAT IS TO BE DONE 4 1 ERROR MESSAGE SIGNIFICATION AND ACTION 5 SOFTWARE UPDATE 6 OPERATING CONTROLS AND LED s OF HARDWARE DDITION A tabulary overview of Internal messages by new installation Ci co 13 13 13 15 15 19 19 21 21 21 21 23 26 26 29 31 34 Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 www tci de Seite 3 von 36 Gi Funktionsweise PreVision Control PreVision Control Intelligent Condition Monitoring Der Kl gere beugt vor Vorbeugen ist besser als heilen was f r den Menschen gut ist gilt nat rlich auch f r den Indust rie Computer Wir sind der Meinung dass man auch das beste System noch verbessern kann Und genau das haben wir mit dem tci PreVision Control getan Unsere intelligente Kombination aus einem unabh ngigen Hardware Modul mit USB Schnittstelle und einer speziell entwickelten Software ber pr ft nicht nur permanent s mtliche relevanten Systemparameter sondern wertet sie auch parallel aus Gleichzeitig wird neben den L ftern die Helligkeit des TFT Backlights gesteuert was gerade in besonders warmen Umgebungen automatisch die Verlustleistung reduziert und den Grenzbereich erweitert Die intuitive grafische Oberfl che h lt Sie auf Wunsch dabei ber alle Details auf dem
7. 36 ci In this window all errors and warnings are noti ced On the top list you get all messages since the last start The first three messages are no errors and are shown at every start At the bottom list all active messages are shown Info Warning Error The chart can be used for the record of values progression There is the possibility to control 6 channels The scale of the y axis can be moved from the left side to right side It is fixed by the last maximum data The X axis shown the inter val time The diagram will be updated permanently With the button AutoSize off it can be controlled With the button Clear Chart you can clear the diagram and the documentation will be restarted With the Button Reset the documentation can be stopped and all channels will be reseted From the page S M A R T you receive information about the quality condition of your inserted non removable disks Should anon removable disks be inserted you can select these over HD selec tion Within the right range they receive current values such as size operation hours and sectors It is important that the status of the several IDs is signalised as OK green or as not determinable The red range is deter mined by the values of the manufacturer data the yellow range is limit values which generate a warning If there is no green bar a harddisk def
8. 62 84 28 www tci de Seite 19 von 36 loi oT 3 Programmkonfiguration 3 Program contiguration 3 1 Das Einloggen Das Standard Passwort f r den Useradmin ist tci 3 1 The login The standard password for the user admin is tci 3 2 Kanale konfigurieren Passwort dl Die Schaltfl chen Edit und Set to User Default bieten die M glichkeit die Konfiguration zu ndern bzw auf Standard zur ck zu setzen Ok Abbruch Hier kann der Benutzer Warngrenzen konfigurie ren die sich z B als gelben Balken im Fenster SMART abbilden In den Standardeinstellungen sind alle Warnun gen ausgeschaltet und das Loggen der Werte deaktiviert Die Grenzwerte fur Warnungen sind gleich den Grenzwerten fur Fehler Ausliefe rungszustand 3 2 Channel configuration The buttons Edit and Set to User Default offers the possibility to configure the channels or set back to the default settings Here is the possibility for the user to configure the warning values For example it will be shown as yellow bar at SMART By the standard configuration all warnings are di sabled and the logging of data is not active The limit values of messages are same as errors delivery status Prog M E A ar E Fk Be By every start of the system PreVision Control test the fans You can hear the higher speed of the fans during booting You have the possibility to disable this test Corresponding configuration can be made under the
9. Laufenden Reduzierung der Downtimes Durch intelligente Algorithmen wird die Leistungsaufnahme Ihres Systems angepasst falls die Temperatur in einen kritischen Bereich kommt Die Produktion kann vollst ndig beendet werden Der Service erfolgt in der R stzeit Geringerer Verschlei durch tem peraturgeregelte L fter dreht nur mit der notwendigen Geschwindigkeit Gegen ungeplante Downtimes Bei der berwachung der Systemparameter k nnen Sie in Erg nzung zu den herstellerspezifischen Werten eigene Schwellwerte definieren So werden Sie in Zukunft rechtzeitig durch eine LED Matrix am Ger t ein Pop up Fenster oder verschiedenste Alert Optionen Plus Version benachrichtigt und k nnen zust ndig die erforderlichen Ersatzteile bereitstellen Den Wechsel nehmen Sie genau dann vor wenn er Ihnen optimal passt Ihr Vorteil liegt klar auf der Hand ungeplante Ausfallzeiten werden vermieden Stillstand durch Wartung nicht nur minimiert sondern sogar planbar und Ihre Produktion l uft Angenehmer und Kosten sparender Nebeneffekt Anstelle fixer Serviceintervalle gibt es ab sofort Service on Demand Das Plus an Service Mit der Plus Version erleben Sie einen v llig neuen Servicelevel Wenn der PreVision Control feststellt dass ein Teil demn chst ausf llt kann auf Wunsch direkt eine E Mail ans tci Service Team geschickt werden Nach kurzem Check der Log Datei wird Ihnen umgehend das passende Ersatzteil zugesendet Das ve
10. dm Dire aan If Es rara dur Leida bike gol Eon ure Support aia UE LALA ar Tall Passo Eiriegjen Benutzername XXXXXXXX Passwort XXXXXXXX Nach erfolgreichem Login k nnen Sie sich hier das Software Update als Zip Datei herunterladen Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 28 von 36 Ci 5 Software update On our homepage www prevision control de you can update your PreVision Control versi on Click the flag update and login with the following username and password Industrial competed A hime sum Supo an A u RF er a wer ten Id EHE Hi COMPUTER Dean COMA Damri PreVision Contra intelligent Condition Menitering Software Update rer Das ron vr Upa 7 a po AA L z F una ni A Cr hi epale my your Pra rear Conni goi eia ra a sp Toumi mid E h pour mier peed n 1 4 By soccer gan you can eand on thes page I 1 pramida Hal pow met rob ihe ener fF Linar hogin Feier Rey fan De Ar nee onder pone i A ALAS LHSHTERTEE Fred Loyin Username XXXXXXXX Password XXXXXXX With successful login you can download the Software Update as a Zip file Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 29 von 36 lci 6 Bedienelemente und LED Anzeige der Hardware D210 D209 D208 D207 D206 D205 D204 D203
11. to make a specified time caused on technical equippement Harddisk have a finite life time this is based on the environmental demands Signification Excess or sub values temperature limits into the chassis which are specified or are configured by your own limits Reason For example Excess or sub tempera ture of climatic environmental requirement opti onally direct solar radiation Covered ventilation or pollute filter mat Action Check and or changing the environmen tal requirement Cleaning or changing the filter mate Check for damage or covered fans Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 27 von 36 Ci 5 Software Update Auf unserer Homepage www prevision control de k nnen Sie sich Ihre Version updaten Wahlen Sie dazu den Reiter Update an Geben Sie hier folgenden Benutzername und Passwort ein Industrie Compubes Eievaletdas Dokumentation Suggest bemos Fi Du E a EEE POMADA L GUNCOSA HUGA COMAFTA 866GEDAUDIALTOMARGN UNTER Buche Prevision Control Intelligent Condition Monier tadas nena Ermua Senta ipia Update Previs en Control lparran Software Jedate pamar Deir piti PHE bH ine fun Ugia de Phin Lorre Amra bagien Es en Lapi Dagi fidin Soe in Pan Hand hi LELES ab ienn 12 Soden oa Depe ok ered werden bia beer Daten zum Dosmioad federn Une realen miren Dee sach den al
12. AEInProgress WSAENetDown WSANotlnitialised Ubertragungsfehler Plugin fehler Plugin konnte nicht initialisiert werden Ubertragungsfehler Log Datei konnte nicht geschrie ben werden L fter wurde als defekt erkannt MCHW hat nicht geantwortet es wird versucht wieder eine Verbindung herzustellen Uber tragungsfehler Service tciPrVCService ist nicht gestartet USB Treiber wird von einer ande ren Application verwendet PrVC Anzeigeprogramm Fron tend gestartet PrVC Anzeigeprogramm Fron tend gestoppt MCHW konnte nicht initialisiert werden MCHW antwortet nicht Service teiPrVCService gestartet Service tciPrVCService gestoppt PrVC Plus Option Webserver gestartet PrVC Plus Option Webserver gestoppt Service wurde wieder gestartet Service wurde gestoppt Die Verbindung zum Service wurde wieder hergestellt Service hat USB f r MCHW f r andere Anwendung freigegeben Service hat den USB Anschluss f r die MCHW wieder ber nommen Webserver wurde gestoppt Webserver Komunikation mit dem Winsock funktioniert nicht Ci USB Kabel in Ordnung Blockiert ein anderes Programm den Rechner zu 100 Gen gend freier Arbeitsspeicher Plugin Datei defekt Neuinstallation USB Kabel in Ordnung Blockiert ein anderes Programm den Rechner zu 100 Lese Schreibrechte f r Verzeichnis vorhan den Umgehend austauschen USB Kabel in Ordnung Blockiert ein anderes Programm de
13. Eu ANTA A PP a Hes A 12 A ee r ised Der ee aP bei o gr er Ty fill VEST bort eras fm ACHTUNG Die Loggdateien k nnen auf Dauer viel Speicherplatz belegen bei 14 Werten 26MB pro Tag Die Loggdatei kann z B mit MS Excel ge ffnet und bearbeitet werden Pfad C Programme tci PreVision Control Logs Pisa ii aaa CANTA en aaa Hua ae ee ee e j de sa Ludwig Rinn Stra e 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 22 von 36 ci Editing wal se wih MD Tiempo bend de cies 3 4 Logging au are In the edit window the logging of the chan erro nels can be activated Only the raw values er are logged Under the point Logging you can get information about the directory where the log data is saved ia Sore es ee LA wee eee Jogo tener mir arias You find all available values at the List A Overview logged data You can mark the values for logging The line under the list shows approximatly the needed space for the logfiles A A AA H a Er TET id bolo Ed mal ATTENTION The logfiles can take much space on your system 14 values 26MB per day en U m A AAA AA AAA laid e ha ass j HEE an j EA f E f The logdata can be opened with excel i Path C Programme tci PreVision Control Logs E Jain fa en Lm a ik Hs cm Ludwig Rinn StraB
14. Hersteller spezifizierten Werte betrieben werden Bedeutung ber Unterschreitung von Kenn 79 27 2008 LI BC Fehler Temp MO O Ahr eri 12 00 Landi 20 000 TA zahlen f r die vom Hersteller der HDD vorgege benen Werte oder der von Ihnen konfigurierten Warnwerte Diese Werte werden kontinuierlich von der PreVision Control gepr ft und meldet einen Fehler bevor das System ausf llt Reason Verschlei Temperatur Vibrationen mechani Beispielscreen L fter hat weniger 500 U min L fter k nnte ganz ausgefallen sein sche Beanspruchung verringern die Lebens dauer der Festplatte Festplattenfehler durch Fehlermeldung CPU Temperatur Zugrufsbeanspruchung 4 1 Fehlermeldungen Bedeutung und Actionn Action Kurzfristiger Austausch eine genaue Zeitangabe kann aus technischen Gr nden nicht gemacht werden Festplatten haben eine endliche Lebensdauer diese ist abh ngig von den Betriebsbedingungen 1 Bedeutung ber Unterschreitung von 73 02 2008 13 16 01 Felter Tanp CPU Albue Wert PODA Lami 15 00 Zah Temperatur Grenzwerten f r die vom Hersteller der CPU vorgegebenen Werte oder der von Ihnen konfigurierten Warnwerte Reason Beispielsweise Umgebungstemperatur zu hoch eventuell direkte Sonneneinstrahlung Verdeckte L ftung bzw verunreinigte Filtermatte Ger te Innentemperatur k nnen die Reason sein Action Umgebungstemperatur pr fen und ggf A ehana RER Bedeutung Uber Unterschreitun
15. The user is responsible for the moment of examination and or repair Because of technical reasons an exact time can t be specified PreVision Control is a sys tem that indeficats signs before the system has a downtime and it advises this messages Previcion Contral Melduna Defination 17 01 2007 16 21 10 Fehler Fan Chases i Aktueller Wert O rgez Limit 950 00 Warning May be or will be defined by the user Error Will be advised when a controlled component is used out of specification of the manufacturer Screen for example fan under 500 U min per minute Fan can be out of order 4 1 Error message Signification and action Error message CPU temperature Prr Yon Lorre Hke E i Signification Excess or sub values temperature 05 02 2008 12 600 Fahan Tanp CPU Atamer Wert HIOOG Lmt 15 0080 Zu limits which are specified of the CPU producer or are configured by your own limits Reason For example Excess or sub tempera ture of climatic environmental requirement opti onally direct solar radiation Covered ventilation or pollute filter mat Action Check and or changing the environmen tal requirement Cleaning or changing the filter mate Check for damage or covered fans 4 Signification The fan chassis could be drop out BER ater Fara si Aller Wert Diipa Lied S00 res or is dropped out Reason Further operating by continuous over temperature The system can be damaged Fan chassis hasn t the ne
16. alierung der Y Achse kann von der linken Seite Standard Einstellung auf die rechte umgeschaltet werden und wird durch den maximalen letzten Wert festgelegt Die X Achse stellt die Intervalle dar und kann somit mit der Zeit in Bezug gebracht werden Die Diagramme werden st ndig aktualisiert Dies kann der Benutzer ber die Schaltfl che Autosize aus verhindern bzw einschalten Die Schaltfl che Grafik l schen l scht die auf genommenen Verl ufe Die Aufzeichnung beginnt von vorne Mit der Schaltfl che Reset wird die Aufzeich nung gestoppt und die ausgew hlten Kan le werden zur ckgesetzt Von der Seite S M A R T erhalten Sie Informatio nen ber den Qualit tszustand Ihrer eingebauten Festplatte Sollten mehrer Festplatten eingebaut sein k nnen Sie ber HD Auswahl diese an w hlen Im rechten Bereich erhalten sie aktuelle Werte wie Gr e Betriebsstunden und umverteil te Sektoren Wichtig ist dass der Status der einzelnen ID s OK als gr ner Balken ersichtlich oder nicht ermittelbar angezeigt werden Der rote Bereich ermittelt sich aus den Werten der Herstelleranga ben der gelbe Bereich sind Grenzwerte die eine Warnung generiert Ist kein gr ner Balken mehr vorhanden besteht die M glich eines Festplat tendefektes innerhalb von 24 Stunden Ludwig Rinn Stra e 10 14 e D 35452 Heuchelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 16 von
17. ble to create SharedMemor y applica tion will terminated Unable to start server USB re allocated USB released Winsock is not responding Wrong data size x lt gt x Wrong firmware version Wrong index x at command lt Command gt Wrong telegramm size x lt gt x lt Text gt WSAEInProgress WSAENetDown WSANotinitialised Shared Memory out of date Service tciPrVCService can t load Shared Memory Bereich ist nicht vorhanden USB driver is used by another Application PreVision Control frontend started Prevision Control frontend stopped MCHW can t initialiced MCHW does not answer Signification Service tciPrVCService stopped PrVC Plus Option Webserver started PrVC Plus Option Webserver stopped Service restarted Service stopped Reconnected to Server Transmission error Webserver stopped Transmission error Unable to create SharedMemory application will terminated Unable to start Service Service has re allocated USB connection for MCHW Service has released USB connec tion MCHW for other applications Webserver communication don t work with Winsock Transmission error Firmware does not fit the software Version Transmission error Webserver communication don t work with Winsock Ci Is there other programs whichs blocked the pc MCHW connected USB driver installed MCHW connected USB driver installed Is the software of firmware updates a
18. chelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 www tci de Seite 31 von 36 lci Anhang A Tabellarische bersicht der internen Meldungen bei Neuinstallationen Meldung Falsche Telegramml nge x lt gt x lt Text gt Server konnte nicht gestartet werden Timeout Konfiguration x Warten auf Antwort x ms Access denied Applikation l uft bereits Could not read file lt Filename gt Could not save config SharedMemory problem D2XX Device Not Found D2XX Device Not Opened D2XX General IO Error D2XX Insufficient Resources D2XX Invalid Handle D2XX Invalid Parameter E Mail wurde gesendet Empfangstimeout x ms mit x Zeichen Error in function GetFTDeviceCount lt ErrNr gt Erzeugung des SharedMemory Bereiches fehlgeschlagen Applikation wird beendet Falsche Datengr e x lt gt x Falscher Index x bei Kommando lt Com mand gt Fehler bei Rundung Wert 0 Fehler beim Datenempfang von der MCHW Fehler beim Versenden der E Mail lt Errortext gt Fehler Nr x beim Versand der E Mail Fehler Kann Baudrate nicht setzen Fehler keine PreVision Control Hardware gefunden Fehler Keine PrVC Hardware gefunden DeviceCount x Fehler Keine falsche Firmware geladen Fehler Plugin Fehler lt Text gt Handle 0 Fehler Plugin Fehler lt Text gt Prog Pointer NIL Fehle
19. ctiv Information Information USB cable OK Is there other programs whichs blocked the pc MCHW connected USB driver installed Cable checked Action Information Information Information Information Information Information USB cable OK Is there other programs whichs blocked the pc Information USB cable OK Is there other programs whichs blocked the pc enought memory Information Information Information Web server haven occupies standard 8080 USB cable OK Is there other programs whichs blocked the pc update firmware USB cable OK Is there other programs whichs blocked the pc Web server haven occupies standard 8080 Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 www tci de Seite 35 von 36 tci GmbH e Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim GieBen Tel 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 vertrieb tci de
20. e 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 23 von 36 ci ci 4 PreVision Control zeigt eine Meldung was ist zu tun ACHTUNG Folgende Fehlermeldung zeigt an dass das System au erhalb der Spezifika Festplatten Temperatur tion betrieben wird bzw ein Bauteil HDD L fter droht auszufallen oder ausgefallen ist Bedeutung ber Unterschreitung von z B L fter Es liegt im Ermessen des Anwenders wann eine Pr fung bzw Instandset 99 59 3008 11 19 99 Fehon Tag 100 Mieke wer arcu ars za Temperatur Grenzwerten f r die vom Hersteller zung erfolgt Eine genaue Zeitangabe ist aus technischen Gr nden nicht m glich PreVisi der HDD vorgegebenen Werte oder der von on Control ist ein System dass Anzeichen f r Systemausf lle fr hzeitig erkennt Ihnen konfigurierten Warnwerte und diese mitteilt Reason Beispielsweise Umgebungstemperatur zu hoch Verdeckte L ftung bzw verunreinigte Filter matte k nnen die Reason sein Action Umgebungstemperatur pr fen und ggf ndern Filtermatte reinigen austauschen Fehler durch verdeckte L fter beheben Previsi n Control Meldung Begriffserkl rung 17 01 2007 16 21 10 Fehler Fan Chases i Aktueller Wert O ngez Limit 200 D rpa Warnungen werden bzw k nnen durch den Anwen der selbst definiert werden Fehler werden angezeigt wenn berwachte Kompo Festplattenfunktion nenten au erhalb der vom
21. e OK Is there other programs whichs blocked the pc Data existing Reading rights USB cable OK Is there other programs whichs blocked the pc Service is running MCHW has connection driver installed driver installed Information Information MCHW connected USB driver installed check email parameter USB cable OK Is there other programs whichs blocked the pc check email parameter MCHW connected USB Driver installed enought memory MCHW connected USB driver installed Firmware Update New installation change the fan Information Information Read write rights for listing available USB cable OK Is there other programs whichs blocked the pc Memory out of Date Pointer NilValues No connection to windows service No PreVision Control Hardware found Application will close Pointer NIL gt Pointer NilValues Port s already used by another appli cation PreVision Control frontend started Prevision Control frontend stopped PreVision Control hardware initialisation failed PreVision Control Hardware is not con nected Message Prevision Control Service stopped Prevision Control WebService started Prevision Control WebService stopped PrVCService connected PrVCService disconnected Reconnected to Server Requesting data for config number d the d time Server stopped Timeout Config x Waiting for answer x ms Timeout receiving dms with d chars Una
22. ect can appear within the next 24 hours Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 www tci de Seite 17 von 36 ci 2 2 Info und Meldungsfenster bol mej Frakan Cor rol Parone tre Prete Lert Ig Im Infofenster stehen die Informationen ber die Versionen der aktuellen Kompo nenten berwachungsplatine Software etc und einen Link auf die Webseite von 2 2 Information and message windows GQ bha Grab Frea Control Hera Ma fars cer Pein Lori ci The Info window informes the user about the version of the components e g hard ware software and link to the website of tci GmbH Updates can get under www w Preiser i Conteo CHE T Birmu 20 11 10 00 50 Crit MAA el cae 2 7 5 E im fo Game tci GmbH Updates unter www prevision Senor Vertor 20 01 50 E abrir Condbon mni A 500041 control de Das Meldungsfenster alarmiert bzw infor W210 Fehler Par Chass 1 Altar wart Dra Lam SOx oxps miert den Benutzer ber die aktuellen Feh ler und Warnungen Es wird bei Auftreten neuer Meldungen aufgerufen In der Konfiguration hat der Benutzer die M glichkeit das Anzeigen des Meldungs fensters abzuschalten Pernia Cee re Pir een ACHTUNG Folgende Fehlermeldung zeigt an dass das System auBerhalb der Spezifi kation betrieben wird bzw ein Bauteil HDD L fter droht auszufallen oder ausgefallen ist
23. eded power or is damaged Filter mat is polluted or the ventilation is covered Action Check and or changing the fan Cleaning or changing the filter mate Check errors caused of covered fan Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 26 von 36 Harddisk temperature 27 HE Lh bic E Fehler Temp HO 0 Alter ert 200 Harddisk function 20 00 5000 Ch bcs Bebe Tee PO 0 Ad eher et DR Temperature inpage a E rrd rol Sich RR 100 3008 15517714 eer Dee ree Sie Wat EVERT Lie Signification Excess or sub values temperature limit which are specified of the HDD producer or are configured by your own limits Reason For example Excess or sub tempera ture of climatic environmental requirement opti onally direct solar radiation Covered ventilation or pollute filter mat Action Check and or changing the environmen tal requirement Cleaning or changing the filter mate Check for damage or covered fans Signification Excess or sub values temperature limit which are specified of the HDD producer or are configured by your own limits These limits are check continuous by the PreVision Control and produce messages before the sys tem will be damaged Reason Wearing temperature vibration me chanical strain reduce the life time of the HDD HDD errors caused on sharing strains Action Short term changing there is no possibility
24. ein anderes Programm den Rechner zu 100 MCHW angeschlossen USB Treiber installiert Gen gend freier Arbeitsspeicher USB Kabel in Ordnung Blockiert ein anderes Programm den Rechner zu 100 Information USB Kabel in Ordnung Blockiert ein anderes Programm den Rechner zu 100 Emailparameter berpr fen Emailparameter berpr fen MCHW angeschlossen USB Treiber installiert Firmware Update durchf hren Gen gend freier Arbeitsspeicher Neuinstallation Information Information Kanal x hat eine falsche ID x sollte x sein Kann Plugin Klasse nicht erzeugen Kann Plugin nicht initialisieren Konfiguration f r Konfiguration x x mal ange fordert Konnte Konfiguration f r Kanal x nicht empfangen Logfile konnte nicht erstellt werden L fter an Kanal x sollte gewechselt werden MCHW hat nicht geantwortet versuche erneut zu verbinden No connection to windows service Port x wird von einer anderen Anwendung verwendet PreVision Control frontend started Prevision Control frontend stopped PreVision Control hardware initialisation failed PreVision Control Hardware is not connected Prevision Control Service gestartet Prevision Control Service gestoppt Prevision Control WebService gestartet Prevision Control WebService gestoppt PrVCService connected PrVCService disconnected Reconnected to Server USB freigegeben USB zugeordnet Webserver gestoppt Winsock antwortet nicht WS
25. g von ndern Filtermatte reinigen austauschen Fehler fe oe a Tre fone nude Stuer wert BEST Le rien ta Temperatur Grenzwerten im Geh use oder der durch verdeckte L fter beheben von Ihnen konfigurierten Warnwerte Reason Beispielsweise ist die Umgebungstemperatur zu hoch Verdeckte L ftungsschlitze bzw verunrei nigte Filtermatte Bedeutung Der Geh usel fter droht auszu Action Umgebungstemperatur pr fen Fil BEE Fates Far Chess 1 Bib Wert Dep lit 500 00 fallen oder ist ausgefallen Ein weiterer Betrieb _ termatte reinigen austauschen Fehler durch kann bei l nger anhaltender Ubertemperatur E verdeckte L fter beheben zum Ausfall des Systems f hren Reason Geh usel fter hat nicht mehr die ben tigte Leistung bzw ist defekt Filtermatte verschmutzt oder L fter sind verdeckt Action Pr fen ggf Austausch des L fters Filtermatte reinigen austauschen Fehler durch verdeckte L fter beheben Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 24 von 36 Seite 25 von 36 ci 4 PreVision Control has a message what is to be done Attention Following error message show you that the system will be used out of the spe cification or one of the components HDD fan can fall out or fell out e g fan
26. ion of the driver software from Pravicion Control the delivered CD ROM and follow the ins tallation instructions or open the hardware assistant for installation i Neue Hardware gelunden A 2 Software installation The installation of the Software begins with choosing the language Please follow the installation routine Setup Sprache ausw hlen Wahlen Sie die Sprache auc dia w hrend der ike instalation benutzt warden soll Dalach Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 9 von 36 ci Ci Bei PreVision Control Plus mussen Sie w hrend der Installation in diesem Fenster die Seri By installation of the PreVsion Control plus version please fill into this window the serial ennummer eintragen Die Seriennummer finden Sie auf dem Ger tepass Wenn Sie dieses no The serial number will be found on the Identity card If you don t fill in this field PreVisi Feld leer lassen wird PreVision Control installiert und die Vorteile der Plus Version k nnen on Control will be installed and the advantages of the Plus version can t use nicht genutzt werden ra Sclup Pre ision Conirol tal rm Sclup Pre ision Conirol Benulzerinlormationen i Benulzerinformalionen Otte ragen Se les Daten ai Fi Otte bagen Se Fea Daten eri Sesiencaarenes raw f r Plus esio hentig Seriennummer raw f r Pluss Vesian ben tigt Best tigen mit Fe
27. kierung kann nicht geschlossen werden dass diese Bezeichnungen freie Warennamen sind Herausgeber bersetzer und Autoren dieser Publikation haben mit gr ter Sorgfalt die Texte Abbildungen und Programme erarbeitet Dennoch k nnen Fehler nicht v llig ausgeschlossen werden Die tci GmbH bernimmt daher weder eine Garantie noch eine juris tische Verantwortung oder Haftung f r Folgen die auf fehlerhafte Angaben zur ckgehen Mitteilungen ber eventuelle Fehler werden jederzeit gerne entgegengenommen Die Angaben in diesem Handbuch gelten nicht als Zusicherung be stimmter Produkteigenschaften nderungen die dem technischen Fortschritt dienen bleiben vorbehalten Die tci GmbH haftet nicht f r unmittelbare Sch den die im Zusam menhang mit der Lieferung oder dem Gebrauch der Dokumentati on stehen Wir haften zudem auch nicht f r etwaige Fehler in dieser Publikation Wir verpflichten uns in keiner Weise die in dieser Do kumentation enthaltenen Informationen auf den aktuellsten Stand zu bringen oder auf dem neuesten Stand zu halten Alle Rechte vorbehalten Printed in Germany Gedruckt auf chlorfrei gebleichtem Papier Ludwig Rinn Stra e 10 14 e D 35452 Heuchelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 6 von 36 Ci Liability Copyright Edited by Copyright Trademark Note Liability Ren Jung tci GmbH Ludwig Rinn Str 10 14 D 35452 Heuchelheim Germany
28. n Las iamue pag ren Lipa Sh age ie NAR te i Tii ee mx FL shilil rW it E ae Pode SEE ni a rea um im e zu di a De Minima tz aT 0 A ELO mm li 1 PERRO A ie hae E Les ee AS Tiii danj Ci CETE n ET ki a 1 russ PEGE UK NE SL ee ae er a 1 Ike Ga San Eiger liege LP Beil in 100 Of Er thie dl Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 14 von 36 Die Ubersichtsseite ist die Hauptseite des Programms und bietet dem Benutzer die bersicht ber die Verl ufe der aktuell berwachten Kan le Auf der Kanalseite hat der Benutzer die bersicht aller aktuellen Werte die erfasst werden Zus tzlich werden die CPU Aus lastung und Betriebsstunden der ber wachungshardware angezeigt Rechts unten wird die Zeit der letzten Messung angezeigt Auf der Backlightseite ist die Steuerung des Backlights ber die Plus bzw Minus schaltfl chen oder Schieberegler m glich Prozentanzeige des aktuell angestellten Wertes kann sich kurz verz gert ndern Bewegungsmelder aktiv ein aus nur bei ambiento 2 Program desktop 2 1 The pages ms ae I ET eure ame FRI amar Fie Cod Fall ma Jar ij PA Font 1 Pra ds dl i aan TES dl H ae re ip ca ara Edd TRE A A Ben ies b aea 100 Hiki lci The overview is the main page of the program and offers a timeli
29. n Rechner zu 100 MCHW angeschlossen USB Treiber installiert Ist die Software f r Firmwareupdates noch aktiv Information Information USB Kabel in Ordnung Blockiert ein anderes Programm den Rechner zu 100 MCHW angeschlossen USB Treiber instal liert Kabel in Ordnung Information Information Information Information Information Information Information Information Information Information Webserver Port belegt Standard 8080 Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 www tci de Seite 33 von 36 lci Addition A tabulary overview of Internal messages by new installation Message Access denied Application is allready running Cant create Plugin Class Cant init Plugin Channel x has wrong ID x should be x Could not read file lt Filename gt Could not recivie config for channel d Could not save config SharedMemory problem D2XX Device Not Found D2XX Device Not Opened D2XX General IO Error D2XX Insufficient Resources D2XX Invalid Handle D2XX Invalid Parameter E Mail has been sended Error by Round Wert 0 Error in function GetFTDeviceCount lt ErrNr gt Error No x while sending Email Error receiving data from MCHW Error while sending email lt Errortext gt Error Can not set Baudrate Error No PreVision Control Hardware fou
30. nd Error No tci GmbH device found Device Count x Error Plugin Error lt text gt Handle 0 Error Plugin Error lt text gt Prog Pointer NIL Error Wrong No Firmware loaded Error hardware access denied Fan connected to MCHW Channel x should be changed soon Info x Plugin s found Info x Plugin s loaded Logfile could not be created MCHW did not answer trying to reconnect Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 34 von 36 Signification Access of configuration was denied Service tciPrVCService is allready running Plugin bug Plugin can t intialice Connection problem Could not read file Connection problem Configuration can t send to MCHW Problems of communication to USB driver Problems of communication to USB driver E Mail has been sended rounding error Problem of communication with MCHW Error No x while sending Email Transmission error Error while sending email lt Er rortext gt Communication problem with MCHW Plugin error No communikation to firmware GivelO sys Driver have no function fan is defect Valid Plugins in the sublist x valid Plugins found Info x Plugin s loaded Logfile could not be created MCHW did not answer trying to reconnect Action wrong password Information enought memory Plugin defect New installation USB cabl
31. ne for the most important channels On the channel overview all values are shown Additionally the CPU Load and the working time is shown At the bottom right the time of the last measurement is shown Here is the possibility to control the back lights with plus and minus icons or with controller The percentage scale which shows the actual valve can change with a short delay Motion detection On Off exclusive for ambiento Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 15 von 36 thew ki min ai Bene pap aa HR T Sears ale ha mm Pida in ia Tall Fidia D D LT Peer io edi ee eel 116 07 L Pata oa Sorin poet lead Sun Bari hanm papa UF f rra PUE P re Et A T BRL dc et E EFi Er i bns kad fra oe a on S Pee ee Br F Die Meldungsseite informiert den Benutzer ber die aktuellen und im Verlauf aufgetretenen Fehler Warnungen und sonstiges Die obere Liste zeigt alle seit dem letzten Programmstart aufgetrete nen Meldungen Die ersten drei Meldungen sind keine Fehlerwarnungen und sind immer nach einem Start vorhanden In der unteren Liste werden nur die aktiven Meldungen angezeigt Es gibt drei Typen von Meldungen Info Warnung Fehler Die Diagrammseite kann f r das Aufzeichnen von Werteverl ufen benutzt werden Es bietet die M glichkeit bis zu 6 Kan le gleichzeitig aufzu zeichnen Die Sk
32. nstellung einmal verlo space for numbers below the control boxes de ren gegangen sein k nnen Sie den Counter mit scripe the time between dimming the backlights folgendem Pfad ffnen C Programme and the shutdown tci PreVision Control ShutDownCounter exe Die Special for the product ambiento you can confi Zahl unter den Kontrollkastchen beschreibt Zeit gure the motion detection zwischen dem herunterdimmen der Backlights und dem Shutdown in Sekunden Speziell fur ambiento kann hier der Bewegungs melder eingestellt werden Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 20 von 36 Seite 21 von 36 3 4 Das Aufzeichnen von Werten loggen Im Editierfenster kann der Benutzer das Loggen der Werte fur den jeweiligen Kanal aktivieren Es werden nur die reinen Werte geloggt Program a afige athe 2 24 Unter dem Punkt Logging wird auf das a se piaia aktuelle Verzeichnis und Dateiname der Datei welche die geloggten Werte ent h lt hingewiesen In Liste bersicht der geloggten Werte sind alle Werte aufgef hrt die gemessen werden Durch anklicken des K stchens kann dieser Wert zum loggen markiert werden In der unteren Zeile wird eine Absch tzung des Speicherplatzbedarfs ausgegeben rer sr A ne BH mm een
33. point Fan Bei jedem Start des Systems testet PreVision Control die Funktion der L fter Man h rt das an der erh hten Drehzahl des L fters beim Starten Es besteht die M glichkeit die Normalkurve zu deaktivieren Entsprechende Einstellungen k n nen Sie unter L fter machen 3 3 General configuration Under this point the password and the interval 3 3 Allgemeine Einstellungen E maa Par Loca Unter dem Punkt Allgemein kann der Aktuali di mi rrie a at ane i Too sierungsintervall und das Passwort ge ndert wer 0 i er Fee time can be changed In additions to this the gi den Ebenso kann hier verhindert werden dass wen a E a pop up of the message window can be avoided ry EE fa E Furthermore you can use the powermanagement Here is the possibility to dim down the back lights by to high temperature and a controlled shutdown A counter shows now the time The counter can be opened by following path C Programs tci PreVision Control ShutDownCounter exe The Sie eh a das Meldungsfenster bei einer neuen Meldung ar im Vordergrund angezeigt wird Des Weiteren Bar ang k nnen Sie hier das Powermanagement einstel lei len Sie k nnen ausw hlen dass die Backlights ne Tann bei bertemperatur gedimmt werden sowie ein kontrollierter Shutdown kann eingestellt werden Ein Counter zeigt die verbleibende Zeit bis zum Shutdown Sollte diese Ei
34. r Hardware Zugriff verweigert Info x Plugin s gefunden Info x Plugin s geladen Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 32 von 36 Bedeutung Ubertragungsfehler Service nicht gestartet Ubertragungsfehler kein Zugriff auf Konfiguration Service tciPrVCService l uft bereits Angegebene Datei konnte nicht gelesen werden Die Konfiguration konnte nicht zur MCHW gesendet werden Kommunikationsfehler mit USB Email wurde verschickt bertragungsfehler Komunikationsfehler mit MCHW Shared Memory Bereich konnte nicht erzeugt werden bertragungsfehler Rundungsfehler bertragungsfehler Beim versenden der Email trat der Fehler lt Errortext gt auf Beim versenden der Email trat Fehler Nr x auf Komunikationsfehler mit MCHW Firmware passt nicht zur Soft wareversion Plugin fehler GivelO sys Treiber funktioniert nicht Es wurden im Unterverzeichnis Plugins x g ltige Plugins gefunden Es wurden x Plugins geladen Ma nahme USB Kabel in Ordnung Blockiert ein anderes Programm den Rechner zu 100 Information USB Kabel in Ordnung Blockiert ein anderes Programm den Rechner zu 100 Falsches Passwort eingegeben Information Datei vorhanden Leserechte L uft der Service Ist die MCHW ange schlossen Treiber installiert Information USB Kabel in Ordnung Blockiert
35. rine free bleached Paper Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 www tci de Seite 7 von 36 ci A Installation Bei allen tci Systemen die mit Betriebssystem und PreVison Control ausgeliefert werden ist die Hard und Software f r PreVision Control vorinstalliert Als Option steht Ihnen die Plus Version zur Verf gung A 1 Treiber installieren PreVision Control meldet sich selbstst ndig als neue Hardware bei Ihrem System Legen Sie die mitgelieferte CD ein und folgen Sie Previsi n Control der Installationsroutine oder starten Sie den Hardwareassistenten um die Treibersoftware von PreVision Control zu installieren i Neue Hardware gelunden A 2 Software installieren Die Installation startet mit der Sprachaus wahl folgen Sie der Installationsroutine Setup Sprache ausw hlen Wahlen Sie die Sprache auc de w hrend der IC Installation benutzt werden soll Deulach Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 8 von 36 Ci A Installation With all systems which are delivered with operating system and PreVision Control the hard and software for PreVision Control both are installed As option the plus version is available A 1 Driver installation PreVision Control report autonomous as new hardware to your system Please use for installat
36. rl Le om an 110 frei Achtung In den ersten 5 Minuten kann auf Grund der kompensierten Eigenerw rmung des Temperatursensors die Temperatur zu niedrig angezeigt werden L i Pr re 1 3 Startphase abgeschlossen Pra kedan Ca li are Kong be Lii ot ciate Bete Meh eee ip ee mad MALA A Fer I BOLT pre 00 ET Ku 1100 i i Fr he i a eri Peir kia ern se En A A EMT 21000 gt 1503 i Bel gt Das Programm startet mit der bersichtsseite L i Pi Der Ludwig Rinn Stra e 10 14 e D 35452 Heuchelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 12 von 36 Ci 1 Start 1 1 Start of the program PreVision Control starts after installation and restart automatically It is possible to start the software several times 1 2 First seconds after starting D een Dee el Attention Because of the compensated self worming the sensor might show a lower temperature within the first 5 minutes 1 3 End of starting Hra kedan ad Be tare Kong be Er ar ari era Pipa MAN Tae PL A Fer I ey pre 00 sa Kun 1100 i i 7 pl u LE ari ee ern iio sc hm few A A af 10 fri oun The program starts with the overview L i Peedi Der Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 www tci de Seite 13 von 36 lci 2 Programmoberfl che 2 1 Die Seite
37. rrors and messages It opens when new messages arrive In the configuration it is possible to disable this window Prr bim i ood el kies nr 17 08 2007 16745 Error Fan Chases Acta Wades 0 00epe Ut 500 pn i Attention Following error message show you that the system will be used out of the specification or one of the components HDD fan can fall out or fell out e g fan The user is responsible for the moment of examination and or repair Because of technical reasons an exact time can t be specified PreVision Control is a system that indeficats signs before the system has a downtime and it advises this messages More details about warnings reasons and actions please see chapter 4 EJ Screen for example fan under 500 U min PEI GSA Tran Fan Chases darum Ya DL ume Der minute Fan can be out of order Defination Warning Can be or will be defined by the user Error Will be advised when a controlled component is used out of specification of the manufacturer Fer dir dar dl cal el Lis nur 2 3 The info The icon on task does not only inform of that the program is active it can view warnings with changing colour Green No errors or warnings Yellow Warning Red Error The same function has the LED on the front page not in all products Green No errors or warnings Red Error E A 118 Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim GieBen e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9
38. rstehen wir unter Sicherheit mit System Zus tzlich k nnen Sie alle Parameter und Betriebszust nde des Industrie Computers in Ihre spezifische Umgebung bernehmen Dazu stehen Ihnen ein potenzialfreier Kontakt ein OPC Server und eine DLL f r Funktionsaufrufe zur Verf gung Au erdem sind wir immer bem ht Kundenw nsche umzusetzen und z B Schock Vibrations und Feuchtigkeitssensoren und Zugriffsschutz mit biometrischen Daten in Ihr System zu implementieren Stillstand Stillstand Stillstand CO Betrieb ER Ersatzteil r zteil mit Age Problemerkennung Ersatzteilbeschaffung geplante Reparatur EI Warnung geplanter Stillstand Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 4 von 36 Ci Function of PreVision Control PreVision Control intelligent condition monitoring for tci industrial computers The wise works precautionarily Our opinion is that also the best system can be improved And exactly that we did With the new developed PreVision Control technology tci offers a system independent hard and software solution for intelligent monitoring and controlling of industrial computers The combination of an independent hardware module with USB interface and specially developed software monitors and analyses the relevant system parameters constantly At the same time it controls the fan and the brightness of the TFT backlights of the panel PC
39. rtigstellen Die Installation der Software PreVision Control ist abge Confirm with Finish The installation of the software PreVision Control is now complete schlossen set Pervistan Onntral 3 lei Contral m re re Sclup Prefision Conirol Completing he Previsi n Control Beenden des Prevision Control Setup Wizard Setup Assistenten E Setup hat die Installation von PreVision Control oe therm Computer sbgeschlaisen Die Anwendung kann uber de Prevision nitiberen Prograr NN aderiipdungen putada werden Control air Klicken Sie auf Fertigatelen um das Setup zu beenden Setup hai rated rar Peron ori on pon coin be he appbrsbon may Ges Larri by sete re related Lars Cit brecha lo ext Setup 2 Frei Cornel en dado klon Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Ludwig Rinn StraBe 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 10 von 36 Seite 11 von 36 Ci 1 Start 1 1 Starten des Programms PreVision Control startet nach der Installation und Neustart automatisch Mehrfach starten der Software m glich 1 2 Die ersten Sekunden nach dem Start Hre Feien amami i et Dhs Kongeshen ble Lapi i ara easa LE SET IT CE Mai Fer I ay pre 1 sa pan min xi skii 7 LLO g LE Sal Pi Peir ki HET inn 2300 hind Ina F
40. z B L fter Es liegt im Ermessen des Anwenders wann eine Pr fung bzw Instand setzung erfolgt Eine genaue Zeitangabe ist aus technischen Gr nden nicht m glich PreVision Control ist ein System dass Anzeichen f r Systemausf lle fr hzeitig erkennt und diese mitteilt Mehr Details zu Meldungen Reasonn und Actionn entnehmen Sie Kapitel 4 Pre bimi Leen Stree Beispielscreen L fter hat weniger 500 U min bzw k nnte ausgefallen sein Begriffserklarung Warnungen werden bzw k nnen durch den Anwender selbst definiert werden Fehler werden angezeigt wenn berwachte Komponenten au erhalb der vom Hersteller spezifizierten Werte betrieben werden 17 04 2007 16 71 10 Fehler Par Cuetos 1 Aktuelles Wert Dires Leds Sip 2 3 Der Infobereich Das Icon im Infobereich ist nicht nur ein Zeichen daf r dass das Programm aktiv ist sondern warnt den Benutzer durch Wechseln der Farbe E Oi 14185 Gr n keine Fehler bzw Warnungen Gelb Warnung Rot Fehler Des Weiteren informiert eine LED frontseitig ber den Status Funktion nicht in allen Systemen Gr n keine Fehler Rot Fehler Ludwig Rinn Stra e 10 14 e D 35452 Heuchelheim Gie en e Phone 49 6 41 9 62 84 0 e Fax 49 6 41 9 62 84 28 e www tci de Seite 18 von 36 Eg A 20 11 56 BER 6S eid MAA aed ears a Cal beh er fence Aeon 20 94 10 Condition minding BHY SH Ec ER prevision control de The Message window informes about e

Download Pdf Manuals

image

Related Search

Related Contents

Jonsered 2116 EL Chainsaw User Manual  BENUTZERHANDBUCH  PECS User Guide  

Copyright © All rights reserved.
Failed to retrieve file