DJ Lase Pro 1200 RGB showlaser user manual
Contents
1. 55 Technical specifications Scanning Number of DMX channels Operating voltage supply Fuse Power consumption Dimensions W x D x H Weight themann MUSIC IS OUR PASSION 56 25 kpps 13 AC 100 240 V 50 60 Hz 5 mm x 20 mm 1 6 A 250 V slow blow 55W 515 mm x 358 mm x 204 mm 12 kg showlaser Protecting the environment 11 Protecting the environment Disposal of the packaging mate rial For the transport and protective packaging environmentally friendly materials have been chosen that can be supplied to normal recycling Ensure that plastic bags packaging etc are properly disposed of Do not just dispose these materials with your normal household waste but make sure that they are fed to a recovery Please follow the notes and markings on the packaging Disposal of batteries Batteries must not be disposed of as domestic waste or thrown into fire Dispose of the bat teries according to national or local regulations regarding hazardous waste To protect the environment dispose of empty batteries at your retail store or at appropriate collection sites DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 57 Protecting the environment Disposal of your old device This device is subject to the European directive 2002 96 EC Do not dispose the device with your normal household waste Dispose this device through an approved waste disposal firm or through your local waste facility When2. Press ENTER Use the UP and DOWN buttons to choose whether and how the laser beam should be mirrored BW Mirroring on X and Y axis SY Y SX Y BW Mirroring on Y axis only SY Y SX N B Mirroring on X axis only SY N SX Y M No mirroring SY N SX N Press ENTER to confirm and save the setting Press FUNC to return to the submenu level Press DOWN repeatedly until the display shows MODE SETTING MUSIC then press ENTER This menu is used to set the response characteristic of the built in microphone Use the UP and DOWN buttons to select a value between low and high sensitivity The bargraph in the display indicates the sensitivity Press ENTER to confirm and save the setting Press FUNC to return to the submenu level Press DOWN repeatedly until the display shows MODE SETTING COLOR In this menu you can select the colours to be displayed Use the UP and DOWN buttons to select whether the unit should only display white colour SINGLE COLOR two colours DOUBLE COLOR or all colours MULTICOLOR Press ENTER to confirm and save the setting Press FUNC to return to the submenu level showlaser 38 Operation 7 3 Menuoverview ra i ET ci IS mie SETTING 1 ME SETTING gt Fre e MIRROR 4 COLOR mera MODE SETTING FOR rai EXER MUSIC B er en tls COLOR H Vm Tone signal MODE SETTING tn MUSIC SHOM DMK ADD 512 MUSIC SE pou L
3. Clipping in effect increasing speed sequence complete pattern gt cutting pat tern counterclockwise gt complete pattern Clipping in and clipping out effect increasing speed sequence dark gt drawing pattern clockwise gt cutting pattern counterclockwise gt dark Clipping on effect increasing speed sequence complete pattern gt cutting pat tern clockwise gt complete pattern Clipping off effect increasing speed sequence dark gt drawing pattern clockwise gt cutting pattern clockwise gt dark Original patterns no waves effect Waves effect increasing speed constant amplitude Waves effect constant speed increasing amplitude showlaser Operation Channel Value Function 12 Colour selection 0 27 White 28 55 Violet 56 83 Green 84 111 Yellow 112 139 Bicolour 140 166 Bicolour mirrored 167 195 Bicolour rotation effect counterclockwise 196 223 Bicolour mirrored rotation effect counterclockwise 224 251 Tricolour constant 252 255 Bicolour constant 13 Pattern structure 0 63 Original patterns DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 45 Operation Channel Value Function 64 127 Pattern composed of lines with bright spots 128 191 Pattern composed of broken lines 192 255 Pattern composed of dots th mann showlaser MUSIC IS OUR PASSION 46 Operation 7 5 Pattern list DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 4
4. ILD SHOW Then press ENTER to con firm Now you can choose the file to be played from the current directory Press UP or DOWN until the desired name appears in the display then press ENTER to confirm The unit now starts running the show from the selected file in an endless loop Press FUNC repeatedly until the display shows MODE DMX then press ENTER Now you can adjust the number of the first DMX channel DMX address used by the unit Select a value between 1 and 512 using the UP and DOWN buttons Press ENTER to store the value and to start operation in DMX mode Make sure that this number corresponds with the configuration of your DMX controller As the unit utilizes 13 DMX channels the highest usable DMX start address is 500 showlaser 36 Operation Operating mode Master Slave Press FUNC repeatedly until the display shows MODE SLAVE In this operation mode the unit follows exactly the master device that it is connected to Press ENTER to confirm and to start operation in Master Slave mode DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 37 Operation Settings menu themann MUSIC IS OUR PASSION Press FUNC repeatedly until the display shows MODE SETTING In this menu you can adjust some features of the device Use the UP and DOWN buttons to select the submenus avail able Press DOWN repeatedly until the display shows MODE SETTING MIRROR
5. and table below for pin assignment DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 21 Installation 1 Ground shielding 2 DMX data 3 DMX data th mann showlaser MUSIC IS OUR PASSION 22 Starting up 5 Starting up Establish all connections as long as the unit is switched off Use the shortest possible high quality cables for all connections DANGER Laser radiation When starting up the device you have to follow the instructions given here amp Chapter 2 Safety instructions on page 8 NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX output to audio devices such as mixers or amplifiers DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 23 Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device Connect the output of the first DMX device to the input of the second one and so on to form a daisy chain Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor 1100 74 W 2 000 n th mann showlaser MUSIC IS OUR PASSION 24 DMX indicator Connections in master slave mode Starting up In DMX operating mode the word signal appears in the display If the word is flashing no DMX signal is received Maybe the DMX co
6. mains cable Beneath the proper operating voltage is indicated Main switch Operating panel INPUT DMX input DJ Lase Pro 1200 RGB themann MUSIC IS OUR PASSION 29 Components and functions 14 SD memory card slot 15 OUTPUT DMX output th mann showlaser MUSIC IS OUR PASSION 30 Operating panel 20 21 22 Components and functions Display MIC LED Microphone for operating mode Sound controlled R G B LEDs Function indicator for red green and blue laser ILDA Indicates the condition of the ILDA connection Green connected red not con nected ILDA INPUT 25 pin D sub connector to connect a controller with ILDA interface ILDA THROUGH 25 pin D sub connector to connect further devices Rotary control Y Size Controls the vertical extent of the laser show DJ Lase Pro 1200 RGB themann MUSIC IS OUR PASSION 31 Components and functions themann MUSIC IS OUR PASSION 32 23 24 25 26 27 28 Rotary control X Size Controls the horizontal extent of the laser show Rotary control MUSIC Controls the response characteristic of the built in microphone FUNC button Opens the main menu UP button Increases the indicated value by one DOWN button Decreases the indicated value by one ENTER button Selects an option of the respective operating mode showlaser Operation 7 Operation 7 1 Starting and stopping th
7. the device and that the AC outlet is protected by a residual current circuit breaker Failure to do so could result in damage to the device and possibly injure the user Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire showlaser 14 Features 3 Features This showlaser is specially suited for discos clubs bars stages etc Because of the DMX control and the ILDA interface it can be easily integrated into the light show The high scanner fre quency allows even the display of moving images Special features of this device Control via DMX 13 channels ILDA interface and via buttons and display on the unit Built in automatic show programmes Sound control Master slave mode 68 different patterns Optical scanner 30 kpps Shows can be stored on commercially available SD memory cards Three laser diodes red green blue DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 15 Installation 4 Installation themann MUSIC IS OUR PASSION Unpack and check carefully there is no transportation damage before using the unit Keep the equipment packaging To fully protect the device against vibration dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage respectively You can install the device on the wall ceiling or floor A mountin
8. 7 Operation th mann showlaser MUSIC IS OUR PASSION 48 Operation 168 n 180 Le 183 AAA 186 189 O 173 182 185 188 191 P 201 El 204 pa 207 A 210 Po 203 206 209 212 225 231 X 227 233 243 Co 246 ZS 252 X 245 248 254 DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 49 Operation 7 6 Using the SD memory card themann MUSIC IS OUR PASSION Secure Digital Memory SD cards can be used to store and exchange preprogrammed laser shows The device supports the following file types Wm ild Binary file format for storing vector lists for laser shows The format has been standar dized by the International Laser Display Association ILDA Files of this type can be created using specialized computer software B prg Text file format that is used to call up several Ild files in succession Files of prg type can be created or modified on your computer with a simple text editor such as Notepad The unit supports up to 100 folders with up to 255 files in each directory The SD memory card must be formatted as FAT32 file system The maximum length of the file and directory names is eight characters showlaser 50 Operation Example The following figure shows the contents of the file ANIMA PRG This preprogrammed show calls the ILD files ANIMAT ILD ANIMA2 ILD and ANIMA3 ILD in succession The first number after the file name indicates the scanner speed the se
9. S TTPVILLE DJ Lase Pro 1200 RGB showlaser th mann user manual MUSIC IS OUR PASSION Musikhaus Thomann e K Treppendorf 30 96138 Burgebrach Germany Telephone 49 0 9546 9223 0 E mail info thomann de Internet www thomann de 18 12 2012 Table of contents na Uu BF WN Table of contents cl OCS isis 5 Safety instructions unsnneneseensssnensennssenessennssnnnssenssssnnssnnnssennsssnessensssnnsssnnnssnnssennsssunsssnnsssanne 8 Features AR RR Een 15 Installationi 1 Starting up Components and functions Operation 7 1 Starting and stopping the device 7 2 Main Menu essen derbe eine sangen alia 7 3 Menu overview 7 4 Functions in operating mode DMX 75 Pattern list teen Rie venderet cete o rir nik aa ari 7 6 Using the SD memory card e eite ttes nnt ntt ttottttntttont tton ttt na tt no sis Troubleshooting terree est ee eee P Ee ERR Eee E d 52 DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION Table of contents 9 Cleaning aa ai 54 10 Technical specifications eese ntent terns enne tna ts stesse tosta sess stas tasse 55 11 Protecting the environment tentent tnnt tient notti to seeesereneneenni 57 10817 00 showlaser MUSIC IS OUR PASSION 1 General notes Symbols and signal words General notes Th
10. ce to DMX interface circuits If the procedures recommended above do not succeed please contact our Service Center You can find the contact information at www thomann de DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 53 Cleaning 9 Cleaning DANGER Laser radiation During cleaning you have to follow the instructions given here Chapter 2 Safety instructions on page 8 To avoid unintended laser radiation remove the safety switch before you begin to clean the device Optical lenses Clean the exterior of accessible optical lenses periodically to optimise light output The fre quency of cleaning depends on the operating environment wet smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device B Clean with a soft cloth using normal glass cleaning products M Always dry the parts carefully th mann showlaser MUSIC IS OUR PASSION 54 Technical specifications 10 Technical specifications Laser medium Laser power Transversal beam mode Laser classification acc to EN 60825 1 2007 Beam diameter at outlet aperture Divergence per beam Divergence overall light Beam angle X Y axis Red 650 nm typical LD GaAlAs Green 532 nm typical DPSS Nd YVO4 Blue 445 nm typical LD InGaN Red 500 mW Green 300 mW Blue 400 mW TEM go 4 lt 5mm lt 12 mrad lt 90 20 DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION
11. cond number controls the number of repetitions for each ILD file ANIMA1 i1d 12 3 ANIMA2 ild 20 1 ANIMA3 i1d 18 4 DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 51 Troubleshooting 8 Troubleshooting DANGER Laser radiation inside the housing During troubleshooting you have to comply with the instructions given here Chapter 2 Safety instructions on page 8 Any servicing of the unit with open housing must only be carried out by quali fied technicians For working on the device you have to wear suitable laser safety goggles In the following we list a few common problems that may occur during operation We give you some suggestions for easy troubleshooting 10817 110 showlaser MUSIC IS OUR PASSION 52 Troubleshooting Symptom Remedy The unit does not work no light the fan does 1 Check the mains power connection and the main fuse not run 2 Check the safety key switch No response to DMX controller 1 If the word signal is flashing in the display no valid DMX signal is received Make sure that the DMX controller is turned on Check the DMX connections and cables for proper connection 2 If the word signal lights up is constantly in the display without any response check the address settings and the DMX polarity 3 Try using another DMX controller 4 Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or interferen
12. ctions Intended use themann MUSIC IS OUR PASSION This device is intended to be used for the projection of laser light effects It has been designed exclusively for show applications Use the device only as described in this user manual Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage No liability will be assumed for damages resulting from improper use This device may be used only by persons with sufficient physical sensorial and intellectual abilities and having corresponding knowledge and experience Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety showlaser Laser safety basics Safety instructions Laser safety requirements are based on DIN EN 60825 1 The corresponding accident preven tion regulation of the Accident Prevention and Insurance Association in Germany is BGV B2 This device contains a class 4 laser It is equipped with a safety key Always remove the key when the device is not attended by a trained operator As an operator you are responsible for the safety of all persons present Familiarize yourself with the laser safety regulations that apply in your country To ensure safe operation it is important to pay attention to the following instructions Prior to commissioning the company operator must appoint a qualified person as laser pro tection
13. discarding the device comply with the rules and regulations that apply in your country If in doubt consult your local waste disposal facility th mann showlaser MUSIC IS OUR PASSION 58 Musikhaus Thomann e K Treppendorf 30 96138 Burgebrach Germany www thomann de
14. e device Starting Carry out the following steps to take the unit into operation Check to see whether all laser safety precautions have been taken Make sure that nobody is in range of the laser beam Insert the safety key into the lock 7 If not already done connect the device to a mains power outlet 10 ELT G Turn the unit on using the main switch 11 After a few seconds the fan and the motors start to work The display shows the current operating mode The unit is now opera tional Turn the safety key 7 into the ON position to turn the laser beam on 5 DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 33 Operation Stopping 7 2 Main menu th mann MUSIC IS OUR PASSION Carry out the following steps to stop the unit 1 Turn the safety key 7 into the OFF position to turn the laser beam off and pull the key off Keep the safety key in a safe place 2 Turn the unit off using the main switch 11 3 Additionally you can disconnect the device from the power supply 10 Press FUNC to activate the main menu and select one of the operation modes When the display is flashing use the UP and DOWN buttons to change the respectively shown value When the display shows the desired value press ENTER To discard all changes and exit back to the main menu press FUNC or wait a minute All previous settings are saved even if you disconnect the device from the mains power suppl
15. g bracket and the necessary screws are included in the package DANGER Laser radiation During installation you have to follow the instructions given here amp Chapter 2 Safety instructions on page 8 To avoid unintended laser radiation remove the safety switch before you start the installation of the device showlaser 16 Installation WARNING Stray laser radiation Inadequately secured additional components may cause stray laser radiation Make sure that all additional components are adequately secured WARNING Laser radiation safety switch required The laser beam must be defeatable any time during operation to avoid hazards by faults unsafe operation conditions or disturbance within the audience Therefore you have to connect a safety switch emergency shut off to the unit by which you can switch off the laser any time even from a remote observation point e g FOH position DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 17 Installation themann MUSIC IS OUR PASSION WARNING Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country Always secure the device with a secondary safety attachment such as a Safety cable or a safety chain NOTICE Risk of overheating The distance between the light output and the illuminated surface must be more than 0 5 m 19 7 in Always ensure sufficient ven
16. ia COLOR et mi R ES psp mim PRG PROP S DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 39 Operation 7 4 Functions in operating mode DMX Channel Value Function 1 Operation mode selection 0 73 Laser off 74 110 PRG mode playback of a preprogrammed show from a PRG file on the SD card 111 147 ILD mode playback of a preprogrammed show from a ILD file on the SD card 148 165 Automatic show type 1 166 184 Automatic show type 2 185 202 Music controlled automatic show type 1 microphone sensitivity must be set toa value higher than zero 203 221 Music controlled automatic show type 2 microphone sensitivity must be set toa value higher than zero 222 255 Operating mode DMX This setting enables the function of the other DMX channels th mann showlaser MUSIC IS OUR PASSION 40 Operation Channel Value Function 2 0 255 PRG or ILD mode directory selection DMX mode pattern selection Chapter 7 5 Pattern list on page 47 3 0 255 PRG or ILD mode file selection DMX mode strobe speed 0 10 No strobe effect 11 199 Strobe effect with increasing speed 200 255 No function 4 Movement on X axis 0 125 Fixed adjustable position on X axis 126 185 Movement effect increasing speed 186 225 Movement effect random speed 226 245 Random position on X axis 246 255 No function DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 41 Operation Channel Value Func
17. is user manual contains important information on safe operation of the device Read and follow all safety notes and all instructions Save this manual for future reference Make sure that it is available to all persons using this device If you sell the device include the manual for the next owner Our products are subject to a process of continuous development We therefore reserve the right to make changes without notice This section provides an overview of the symbols and signal words used in this user manual DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION General notes Signal word DANGER WARNING NOTICE Warning signs A th mann showlaser MUSIC IS OUR PASSION Meaning This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided This combination of symbol and signal word indicates a possible dangerous situation that can result in death or serious injury if it is not avoided This combination of symbol and signal word indicates a possible dangerous situation that can result in material and environmental damage if it is not avoided Type of danger Warning high voltage General notes Warning signs Type of danger Warning laser radiation Warning suspended load Warning danger zone Pee DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION Safety instructions 2 Safety instru
18. ntroller isn t switched on or there s an error in the cabling If the word signal lights up constantly the device receives a valid DMX signal When you configure a group of devices in master slave mode the first unit will control the other units for an automatic sound activated synchronized show This function is ideal when you want to start a show immediately Connect the DMX output of the master device to the DMX input of the first slave device Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 25 Components and functions 6 Components and functions Front panel e DJ SS TFAFAWVILL ce Lase PRO I200 RGB th mann showlaser MUSIC IS OUR PASSION 26 POWER LED Indicates that the unit is switched on MUSIC LED Indicates that a sound signal is received Laser aperture Hanging bracket Locking screw for the bracket DJ Lase Pro 1200 RGB Components and functions themann MUSIC IS OUR PASSION 27 Components and functions Rear panel TR LPS 10817 00 showlaser MUSIC IS OUR PASSION 28 10 11 12 13 Fans LOCK Safety key switch to turn the laser output on or off REMOTE Components and functions Connection for an optional emergency shutdown switch An adapter for switches with phone plug is included Safety eye IEC chassis connector for the
19. officer in writing and notify the operation of the laser equipment to the Accident Pre vention and Insurance Association and to the authority responsible for occupational safety In the event of public use the complete laser equipment must be approved by an expert e g the Technical Control Board T V prior to commissioning DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION Safety instructions Safety DANGER Danger for children Ensure that plastic bags packaging etc are disposed of properly and are not within reach of babies and young children Choking hazard Ensure that children do not detach any small parts e g knobs or the like from the unit They could swallow the pieces and choke Never let children unattended use electrical devices DANGER Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present Never remove any covers A There are no user serviceable parts inside th mann showlaser MUSIC IS OUR PASSION 10 Safety instructions DANGER Electric shock caused by short circuit Always use proper ready made insulated mains cabling power cord with a pro tective contact plug Do not modify the mains cable or the plug Failure to do so could result in electric shock death or fire If in doubt seek advice from a regis tered electrician DANGER Laser radiation avoid exposure to beam The device contains a class 4 laser cla
20. ssified according to EN 60825 1 Do not look into the laser beam The laser beam can injure your eyes when you directly look into it Do not expose yourself to the laser beam The laser beam can cause skin burns In this context take extreme care when using converging optical instruments DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 11 Safety instructions WARNING Eye damage caused by high light intensity Never look directly into the light source WARNING Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy Sensitive persons should avoid looking at strobe lights NOTICE Laser radiation risk of fire e Keep the area exposed to laser radiation free from flammable substances 10817 00 showlaser MUSIC IS OUR PASSION 12 Safety instructions NOTICE Risk of fire Do not cover the device nor any ventilation slots Do not place the device near any direct heat source Keep the device away from naked flames NOTICE Operating conditions This device has been designed for indoor use only To prevent damage never expose the device to any liquid or moisture Avoid direct sunlight heavy dirt and strong vibrations DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 13 Safety instructions themann MUSIC IS OUR PASSION NOTICE Power supply Before connecting the device ensure that the input voltage AC outlet matches the voltage rating of
21. tilation The ambient temperature must always be below 40 C 104 F showlaser 18 Installation Safety switch emergency shut down Connect the optional remote control safety switch to the socket 7 of the device An adapter for switches with phone plug is included If you press the switch the laser beam is switched off immediately To unlock the switch and resume operation turn the knob clockwise ILDA interface You can connect laser control units that generate signals as standardized by the International Laser Display Association to the ILDA input The ILDA output of the unit can be connected to other laser devices The ILDA interfaces are designed as 25 pin D sub connectors The drawing and table below show the pin assignment 1 13 1 X 0000000000000 000000000000 2 Y 14 26 3 Intensity 4 Locking Interlock A DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 19 Installation themann MUSIC IS OUR PASSION 20 R G B User defined signal 1 User defined signal 2 User defined signal 3 User defined signal 4 Return signal from the unit Shutter X M Intensity Locking Interlock B R showlaser Installation 19 G 20 B 21 User defined signal 1 22 User defined signal 2 23 User defined signal 3 24 User defined signal 4 25 Ground DMX connections The unit offers a 3 pin XLR socket for DMX output and a 3 pin XLR plug for DMX input Please refer to the drawing
22. tion 5 Movement on Y axis 0 125 Fixed adjustable position on Y axis 126 185 Movement effect increasing speed 186 225 Movement effect random speed 226 245 Random position on Y axis 246 255 No function 6 Zoom 0 10 No zoom 11 100 Fixed zoom 101 150 Zoom out effect increasing speed 151 200 Zoom in effect increasing speed 201 255 Zoom in and out effect increasing speed 7 Rotation around the Y axis rolling 10817 00 showlaser MUSIC IS OUR PASSION 42 Operation Channel Value Function 0 10 No rotation 11 110 Fixed position of Y axis 111 255 Rotation effect increasing speed 8 Rotation around the X axis rolling 0 10 No rotation 11 110 Fixed position of X axis 111 255 Rotation effect increasing speed 9 Rotation around the Z axis rolling 0 180 Fixed position of Z axis 181 217 Rotation effect counterclockwise increasing speed 218 255 Rotation effect clockwise increasing speed 10 Drawing cutting and deleting of the patterns clipping 0 10 Original patterns no Clipping effect DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 43 Operation Channel Value 11 74 75 104 105 144 145 184 185 224 225 255 11 Waves effect 0 9 10 199 200 255 themann MUSIC IS OUR PASSION Function Fixed clipping increasing size of the cut out pattern parts Clipping out effect increasing speed sequence dark gt drawing pattern clock wise gt dark
23. y showlaser 34 Operation Operating mode Auto show Press FUNC repeatedly until the display shows MODE AUTO SHOW 1 The device operates in stand alone mode and displays a preprogrammed show that can be controlled by the built in microphone if desired Use UP and DOWN buttons to select one of the preprogrammed shows listed in the table below Press ENTER to save the value and to start operation in Auto Show mode Display Show AUTO SHOW 1 Automatic show type 1 Hot and fast AUTO SHOW 2 Automatic show type 2 Slow and gentle MUSIC SHOW 1 No function MUSIC SHOW 2 No function The laser is switched off if a sound controlled show is selected but the microphone doesn t receive any sound DJ Lase Pro 1200 RGB th mann MUSIC IS OUR PASSION 35 Operation Operating mode SD show Operating mode DMX themann MUSIC IS OUR PASSION Press FUNC repeatedly until the display shows MODE SD SHOW dir If there s a SD memory card with stored show programmes in the card slot 14 you can select a directory on the memory card using the UP and DOWN buttons If the name of the desired directory appears in the display press ENTER to confirm Now you can determine whether the device should run a single ILDA show based on a ild file or a preprogrammed show based on a prg file Use the UP and DOWN buttons to toggle between MODE SD PRG SHOW and MODE SD
Download Pdf Manuals
Related Search