User Manual - Sütron electronic GmbH
Contents
1. SU TRON User Manual Administration of Operating Devices Part Number 80860 772 Version 1 Date 2010 11 17 Valid for Slim Line emPower Line Administration of Operating Devices Version Date Modifications 1 2010 11 17 First Edition This manual including all illustrations contained herein is copyright protected Use of this manual by any third party in departure from the copyright provision is forbidden No part of this manual may be reproduced trans lated or electronically or photographically archived or altered without the express written consent from S tron electronic GmbH Violations shall be cause for damage liability S tron electronic reserves the right to make any changes that contribute to technical improvement S SUTRON Overall Table of Contents Overall Table of Contents 1 Important Notes 2 Generally 3 Backup and Transfer 3 1 3 2 3 3 3 3 1 3 3 2 5 Restrict Access 6 Start Application 6 1 6 2 GENEE 1 1 SYMDOIS sirio ii ia 1 1 Safety Notes iniciacion 1 1 Intended USO 1808 08 aii Aa 1 2 Target Group 1 2 A 2 1 LAUNCH Overview A 2 2 Normal Mode tm Meet etant 2 3 Setup Main Mode nar ni 2 3 Administration Operating Mode oococinocccinoccconociconnncnnancnnnnnn nana ncnnnnnnnrnnncs 2 4 A A A A 2 6 Create BaCkup urraca 2 6 Restore backup ss 2 6 Restore Transfer Settings 2 7 RTE Tete EE 2 7 Network SOttiNGS2. 9 Confirm the successful import by pressing the OK button 10 Restart the operating device for the settings to take effect 2 8 S SUTRON Update 4 Update Identify existing im age version Carrying out image update 4 1 Image The operating device offers you the opportunity to update its image The image in cludes the operating system and product specific data The name of the image file is constructed as follows Image_Type_Platform_OperatingSystem_Version bin The file name of an image file starts with the description Image and ends with the image version Press the button Press For Setup Main Menu during startup Press the Settings button Press the Information button Determine the version of the image in the second line of the dialog Pon _ Copy the image into the directory Image of a USB stick Only one image may be existing in the directory Image If multiple images exists no update is performed 2 Insertthe USB stick with the image into the female connector of the operating de vice Press the button Press For Setup Main Menu during startup Press the Update button Press the Update Image button Confirm the dialog Update Image with the OK button to start the update our to The update progress is displayed NOTICE Please do not interrupt the power supply during update After canceling an update process the operating device may not be operational anymore 7 Confirm the
3. Figure 2 1 Launch overview Start gt Normal gt Admin L setup Main k gt Update Ki gt Copy USB Stick l gt copy to Eisch LN Copy to us Import Settings gt Home LA Update Image Update TE Bootloader Ly Home TouchScreen M a Registry Save Registry A Settings Change E Display Mode Ly Start Calibration LA SNTP Settings Ly Home Network gt Settings bal TCPAP Info pl Fix Settings p IP Address A y Gateway DNS gt wns gt Home LA once FTP Settings p Add new user LN List all users Delete a user gt Home tL Device Name Ly Home al Settings LS Contrast Lal Date Time bal Password bal printer le Page ICH settings Network Printer poo Settings Home information Lal Home l gt Start Batenfle gt Exit 2 2 SUTRON Generally 2 2 Normal Mode The program AppStarter exe starts from the internal Flash memory Press For Setup Main Menu Figure 2 2 Display after startup of an IP address to the Ethernet Please note that the device is accessible over the Ethernet only after assignment 2 3 Setup Main Mode If you press the Press For Setup Main Menu button during the startup phase the Setup Main mode starts Update Touch Screen amp Registry Network Start Settings Batchfile Figure 2 3 Setup Main Some settings are password protected The password is 2 3 SUTRON Generally 2 4 Administr
4. 1 2 Safety Notes Read this manual carefully before using the operating device Keep this manual in a place where it is always accessible to all users Proper transportation handling and storage placement and installation of this product are prerequisites for its subsequent flawless and safe operation This user manual contains the most important information for the safe operation of the device The user manual in particular the safety notes must be observed by all person nel working with the device Observe the accident prevention rules and regulations that apply to the operating site Installation and operation must only be carried out by qualified and trained per sonnel 1 1 S SUTRON Important Notes 1 3 Intended Use The device is designed for use in the industry The device is state of the art and has been built to the latest standard safety re quirements However dangerous situations or damage to the machine itself or other property can arise from the use of this device The device fulfills the requirements of the EMC directives and harmonized Euro Dean standards Any modifications to the system can influence the EMC behav ior NOTICE Radio Interference This is a class A device This device may cause radio interference in residential ar eas In this case the user may be required to introduce appropriate countermea sures and to bear the cost of same 1 4 Target
5. Admin ini in the root directory of your USB stick with your favorite editor e g Notepad If the Admin ini does not exist create the file 2 Add the following line to the file or change an existing entry for this parameter Lock 0ff 3 Save the file 4 Insert a USB stick into the female connector of the operating device 5 Press the Admin button during startup of the operating device 6 Confirm the dialog with the OK button to start the administration The message Launch unlocked is displayed 7 Confirm this and the following dialog with the OK button to complete the admin istration 8 Restart the operating device 2 12 S SUTRON Start Application 6 Start Application Automatic start of an application Manual start of an application 6 1 Automatic Start starter bat You can run your application automatically on startup Use the file Starter bat there fore This batch file runs automatically on each startup of the operating device 1 Open your FTP program or the Windows Explorer and enter the ip address of the operating device example ftp 149 208 160 232 2 Download an existing file starter bat from the root directory on your local file system or create a new file with this name 3 Edit the file starter bat with your favorite editor e g Notepad and add the fol lowing content FlashDrv MyFolder MyProgramm exe parameter or StorageCard MyFolder MyProgramm exe parameter With th
6. Backup and Transfer Import settings from backup 3 3 Restore Transfer Settings In addition when you create the backup the file Launch log is secured This con tains the settings for example IP address contrast etc of the operating device as configured in the Setup main operating mode With this file you can restore the settings on a operating device or transfer it to other devices The process of backup and restore all settings is possible only with identical device types 3 3 1 All Settings However if the target device is not the operating device with which the backup was created you have to remove the calibration data from the file Launch log first 1 Open the file Launch log on the USB stick with your favorite editor e g Note pad 2 Select the line that begins with the following text RegString HARDWARE DEVICEMAP TOUCH 3 Delete the line completely 4 Save the file If the operating device no longer be operable by inadvertently imported calibration use a mouse to start the calibration with TouchScreen amp Registry gt Start Calibra tion 1 Press the button Press For Setup Main Menu during startup 2 Press the Update button 3 Press the Copy USB Stick button 4 Insert the USB stick with the backup into the female connector of the operating device 5 Press the Import Settings button 6 Confirm the dialog with the OK button to start import The settings are
7. restore of the default registry with the OK button 8 Confirm the successful update with the OK button 9 Restart the operating device for the update to take effect 2 9 S SUTRON Update Updating the boot loader 4 2 Bootloader The operating device offers you the opportunity to update its bootloader The boot loader starts the operating system and product specific functions The name of the bootloader file is constructed as follows Bootloader_Type_Platform_OperatingSystem_Version bin The file name of a bootloader file starts with the description Bootloader and ends with the bootloader version 1 Copy the bootloader into the directory Bootloader of your USB stick Only one bootloader may be existing in the directory Bootloader If multiple boot loaders exists no update is performed 2 Insert the USB stick with the image into the female connector of the operating de vice Press the button Press For Setup Main Menu during startup Press the Update button Press the Update Bootloader button 6 Confirm the dialog with the OK button to start the update a PF wo NOTICE Please do not interrupt the power supply during update After canceling an update process the operating device may not be operational anymore 7 Confirm the successful update with the OK button Restart the operating device for the update to take effect 2 10 S SUTRON Restrict Access 5 Restrict Access Disable ta
8. Group All configuration programming installation commissioning operating and mainte nance work in connection with the automation system must be performed by trained personnel only e g qualified electricians electrical engineers etc The configuration and programming personnel must be familiar with the safety con cepts of automation technology The operating personnel must have been trained in handling the controller and be familiar with the operating instructions The installation commissioning and maintenance personnel must have an education which entitles them to work on automation systems 1 2 S SUTRON Generally 2 Generally The program allows you to use the buttons to make changes to the configuration The operating device has 3 operating modes Normal no button is pressed Setup Main Button Press For Setup Main Menu was pressed Administration Admin button was pressed 2 1 S SUTRON Generally 2 1 Launch Overview
9. art Application 4 Save the file 5 Copy the file project bat with the FTP program into the root directory of the op erating device 6 Restart the operating device and press the button Press For Setup Main Menu during startup 7 Press the Start Batchfile button Your application will be started immediately 2 14 S SUTRON D SUTRON
10. ation Operating Mode If you press the Admin button during the startup phase the Administration mode of operation starts You can use the Admin ini file to manage the device This file must exist in the root directory of the USB stick This file is used as a dongle to prevent users from changing the device during normal operation Possible contents for the Admin ini file E Observe upper and lower case for all entries Explorer Off Deactivates the Explorer in the registry The change becomes effective on the next device reboot Explorer On Activates the Explorer in the registry The change becomes ef fective on the next device reboot Start explorer exe Starts the explorer Start MyProgram exe Starts the application MyProgram exe Initial directory is windows Use the following syntax to start an application on the usb stick Start HardDisk MyProgram exe Use multiple entries to start several applications Registry Default Destroys the current registry and activates the default registry of the image The change becomes effective on the next de vice reboot StartRepllog On Enables automatic startup of the Repllog exe program in the registry The change becomes effective on the next device re boot StartRepllog Off Disables automatic startup of the Repllog exe program in the registry The change becomes effective on the next device re boot LaunchTouch On The touch variant of the launch will sta
11. e appropriate paths different memory areas of the operating device can be accessed Some paths are dependent on the product line of the operating device USB stick HardDisk Device memory Slim Line FlashDrv Device memory emPower Line StorageCard 4 Save the file 5 Copy the file starter bat with the FTP program into the root directory of the op erating device 6 Restart the operating device Now your application runs automatically each time the operating device is started 6 2 Manual Start project bat You can start your own applications with the launch Use the file Project bat there fore This batch file is executed by pressing the Start Batchfile button 1 Open your FTP program or the Windows Explorer and enter the ip address of the operating device example ftp 149 208 160 232 2 Download an existing file project bat from the root directory on your local file system or create a new file with this name 3 Edit the file project bat with your favorite editor e g Notepad and add the fol lowing content FlashDrv MyFolder MyProgramm exe parameter or StorageCard MyFolder MyProgramm exe parameter With the appropriate paths different memory areas of the operating device can be accessed Some paths are dependent on the product line of the operating device USB stick HardDisk Device memory Slim Line FlashDrv Device memory emPower Line StorageCard 2 13 SUTRON St
12. ed to other operating devices with this mechanism 3 1 Create Backup You can perform a full backup to the directory backup of a USB stick 1 Press the button Press For Setup Main Menu during startup 2 Press the Update button 3 Press the Copy USB Stick button 4 Insert a USB stick into the female connector of the operating device 5 Press the button Copy to USB 6 Confirm the dialog with the OK button to start copying The files are copied to the directory Backup on the USB stick If there is already a directory called Backup with data on the USB stick you have to confirm overwriting in the dialog with Yes 7 Confirm the successful copying by pressing the OK button 3 2 Restore backup NOTICE When restoring the backup all data in the flash memory of the operating device will be deleted You can restore a previously created backup from the directory Backup of a USB stick Restore backupfrom 1 Press the button Press For Setup Main Menu during startup USB stick 2 Press the Update button 3 Press the Copy USB Stick button 4 Insert the USB stick with the backup into the female connector of the operating device 5 Press the Copy to Flash button 6 Select the folder Backup from the Choose Directory dialog and press the OK button 7 Confirm the dialog with the OK button to start copying The backup files are copied from the directory Backup to the flash memory of the operating device 2 6 S SUTRON
13. imported from the file Launch log 7 Confirm the successful import by pressing the OK button 8 Restart the operating device for the settings to take effect 2 7 S SUTRON Backup and Transfer Import network set tings 3 3 2 Network Settings When required only the network settings of the operating device can be imported with the Launch og file 1 Edit the file Launch log on the USB stick with your favorite editor e g Note pad and remove the irrelevant lines from the file The content could look like this RegString Comm CS89501 Parms TcpIp IpAddress 192 168 039 210 RegString Comm CS89501 Parms TcpIp Subnetmask 255 255 255 000 RegString Comm CS89501 Parms TcpIp DefaultGateway 192 168 039 001 RegDWORD Comm CS89501 Parms TcpIp EnableDHCP 0 RegMString Comm CS89501 Parms TcpIp DNS RegMString Comm CS89501 Parms TcpIp WINS With fixed IP addresses the row with the entry EnableDHCP must exist If this line is missing DHCP is automatically activated 2 Save the file 3 Press the button Press For Setup Main Menu during startup of the operating de vice 4 Press the Update button 5 Press the Copy USB Stick button 6 Insert the USB stick with the backup into the female connector of the operating device 7 Press the Import Settings button 8 Confirm the dialog with the OK button to start import The settings are imported from the file Launch log
14. rt at devices with key board The change becomes effective on the next device re boot LaunchTouch Off The standard variant for the device will start The change becomes effective on the next device reboot Lock On The buttons Press for Setup Main Menu and Admin are dis abled If the file Admin ini is found on the usb stick the button Admin is enabled Therefore the deactivation of the lock is possible The change becomes effective on the next device reboot Lock Off All buttons enabled The change becomes effective on the next device reboot Mode Development The shell has full functionality The change becomes effective on the next device reboot 2 4 S SUTRON Generally Mode Standard The Shell is restricted No task bar and task switch available Desktop contains the launch icon only The change becomes effective on the next device reboot DeviceName MyName Defines the device name of the operating device DeviceName MyName Comment no impact A template of the file Admin ini can be downloaded here http download suetron net manual Admin ini S suTRON gt Backup and Transfer 3 Backup and Transfer Backup to USB stick You can backup and restore your data application batch files Launch log etc with the button Update gt Copy USB stick in the Setup main operating mode You can also import saved device settings The backups can be transferr
15. sk bar Activate task bar 5 1 Task bar You can prevent access to the operating system with the task bar by disabling the task bar This is achieved by administration with the file Admin ini This file must be available in the root folder of the USB stick 1 Edit the file Admin ini in the root directory of your USB stick with your favorite editor e g Notepad If the Admin ini does not exist create the file 2 Add the following line to the file or change an existing entry for this parameter Mode Standard 3 Save the file 4 Insert a USB stick into the female connector of the operating device 5 Press the Admin button during startup of the operating device 6 Confirm the dialog with the OK button to start the administration The message Standard Mode set is displayed 7 Confirm this and the following dialog with the OK button to complete the admin istration 8 Restart the operating device Perform the following steps to activate the task bar 1 Edit the file Admin ini in the root directory of your USB stick with your favorite editor e g Notepad If the Admin ini does not exist create the file 2 Add the following line to the file or change an existing entry for this parameter Mode Development 3 Save the file 4 Insert a USB stick into the female connector of the operating device 5 Press the Admin button during startup of the operating device 6 Confirm the dialog with the OK button
16. suscrita inicie 2 8 RA AAA AAA A AAA 2 9 Mag in ais 2 9 B tong stees aa 2 10 EEE 2 11 WAS LTE 2 11 Lock LaAUNCN sen nr nn A ads 2 12 Ree A 2 13 Automatic Start starter bat nana 2 13 Manual Start project bDat o ooocinncccinncccinncccnoncncnonnconancccnanonanana na nanacanananinns 2 13 S SUTRON Overall Table of Contents S SUTRON Important Notes 1 Important Notes al el el gt 1 1 Symbols The symbols in this manual are used to draw your attention on notes and dangers This is the safety alert symbol It is used to alert you to potential personal injury haz ards Obey all safety messages that follow this symbol to avoid possible injury or death DANGER This symbol is used to refer to instructions which if ignored or not carefully followed will result in death or serious injury WARNING This symbol is used to refer to instructions which if ignored or not carefully followed could result in death or serious injury CAUTION This symbol is used to refer to instructions which if ignored or not carefully followed could result in minor or moderate injury NOTICE This symbol and the accompanying text alerts the reader to a situation which may cause damage or malfunction to the device either hardware or software or sur rounding property Reference to source of information This symbol refers to detailed sources of information on the current topic
17. to start the administration The message Development Mode set is displayed 7 Confirm this and the following dialog with the OK button to complete the admin istration 8 Restart the operating device 2 11 S SUTRON Restrict Access Lock buttons at the launch Activate buttons at 5 2 Lock Launch By the administration with the file Admin ini you can lock the buttons Admin and Press For Setup Main Menu in the launch dialog and thus prevent changes of the user to the configuration 1 Edit the file Admin ini in the root directory of your USB stick with your favorite editor e g Notepad If the Admin ini does not exist create the file 2 Add the following line to the file or change an existing entry for this parameter Lock 0n 3 Save the file 4 Insert a USB stick into the female connector of the operating device 5 Press the Admin button during startup of the operating device 6 Confirm the dialog with the OK button to start the administration The message Launch locked is displayed 7 Confirm this and the following dialog with the OK button to complete the admin istration 8 Remove the USB stick and restart the operating device After the restart all the buttons in the launch dialog are locked The Admin button is activated whenever a USB stick is detected with existing Admin ini Perform the following steps to activate the buttons in the launch the launch 1 Edit the file
Download Pdf Manuals
Related Search