2 Mega-Pixel H.264 CMOS Network Vandal Dome User's Manual
Contents
1. User Name test A i Schedule Update 1440 Minutes http test dyndns org L Schedule Update Depends on the input time of Schedule Update it will update DONS s web site automatically The time range is from 5 to 5000 minutes O It will not update 2 dyndns org 4 3322 0rg Update once per day is recommended 1440 minutes per day If updated too frequently it will be blocked DDNS Setting There are several DDNS providers can be selected Select the provider from the pull down list input Hostname User name Password and the Schedule Update time and then click Apply to connect to the DDNS provider Status This field will display the message to indicate the status of DDNS service Updating Information update Idle Stop service http lt hostname username gt lt provider gt com DDNS registration successful can now link to the camera with this URL address Update Failed the name is already registered The hostname or username has already been used Please change it 38 Update Failed check your internet connection Network connection failed Update Failed please check the account information with you provider The input hostname username or password may be wrong 39 D Event Handling Event Setting This device supports multiple event settings Event Setting Y Detect Area 3 e mail Mire louti save to SD card Log E Mail Subject Video Record time PreAla2. Client from Internet http 60 220 20 250 3081 With audio Must enable 3GPP 3G Mobile mera a rtsp 60 220 20 250 554 3g Stream in Configuration Phone Without audio gt Video Audio gt Video rtsp 60 220 20 250 554 3gx Format page With audio rtsp 60 220 20 250 555 3g Without audio rtsp 60 220 20 250 555 3gx Camera 2 Connects to Internet with Floating Public IP Address If the public IP address of ADSL connection is variable you can enable DDNS function to get a fixed URL to instead of the IP address Note only one device can enable the DDNS function in the local network LAN multiple devices use DDNS will update to the DDNS provider too frequently and the DDNS provider will block your URL If the router has DDNS function use router s DDNS function is recommended Please refer to the user s manual of router for the configuration If the router doesn t have DDNS function use one of the cameras DDNS function is recommended Refer to Configuration gt Network gt DDNS page to configure and enable the DDNS function After enable the DDNS assume the registered URL is test dyndns org now the cameras can be linked with following URLs Client from Camera Link Address Internet Camera 1 1 Camera 1 http test dyndns org 3081 PC2 With audio rtsp test dyndns org 554 3g Without audio Must enable 3GPP 3G Mobile rtsp test dyndns org 554 3gx Stream in Configura
3. Screw 2 to fix the gimbals Tilt Adjustment 1 Loosen Screw 3 and Screw 4 2 Adjust Tilt Gimbals as wished 3 Fasten Screw 3 and Screw 4 to fix the gimbals Tilt Gimbals Screw 3 and 4 Screw 2 Pan Gimbals Screw 1 Rotation Gimbals B Monitor Setting 1 Right Click on the desktop Select Properties Arrange Icons By Refresh Save As Scheme Graphics Options Display Modes Me Properties 2 Change color quality to Highest 32bit Display Properties Themes Desktop Screen Saver Appearance Settings Display Plug and Play Monitor on Intel R 82915G G 910GL Express Chipset Family Screen resolution Less J 1024 by 768 pixels 10 C IP Assignment gt Always consult your network administrator before assigning an IP address to your camera in order to avoid using a previously assigned IP address gt MAC Address Each network camera has a unique Ethernet address MAC address shown on the sticker of the camera gt One final note although the IP Search is able to find and configure any network camera on the LAN except those that are behind a router it is a good idea to set the host PC to the same subnet In order to connect to the Web based user interface of the network camera the host PC must be in the same subnet For more information about subnets please consult your network administrator There
4. 4 Administrator approved E ee A PO Ill Disable Enable iil eee bh A oh Le CE le 4d C gt Reset custom settings Reset custom settings 5 When popup the following dialogue box click Yes Warning A Are vou sure vou want to change the security settings For this zone The web page of the device shows as following If you are using IE 8 0 or above please click Compatibility View icon to make this web page works properly E 1P_Camers 5 Windows nternet Expl rer Hara http 192 168 1 200 Streaming 1 v Language Configuration Snapshot Record O Streaming Select the streaming 1 or 2 from the pull down list to display Language Change the display language temporarily Note The display language is changed temporarily for current connection and it doesn t change the default language To change the default language please go to Configuration gt System Information page Configuration Go into the configuration page to set the parameters if necessary Status Bar Shows system date time video resolution and video refresh rate FPS 15 Online Visitor Shows how many users connect to this network camera Function Buttons Click these buttons will perform the following functions Original Size Click this button to display the original size of video Shrink View Click this button to shrink the video to fit the window for vie
5. sender malserver com Receiver s Mail receiver Babemail com Bcc Mail boss abcmail com Mail Port 2 Default Part 25 Sere Setting OOO OOOO OOOO FIP Server fip company com User Name Fiptest tt Password esse FT Port 21 Default Port 21 store Path D Auto Create Folder by Date Yes ex Path 20100115 121032m avi Login Method This device provides 2 kinds of mail settings Anonymous for the mail server which doesn t need login with user name and password Account for the mail server which needs login with user name and password Send Mail Server The IP address or URL of the send mail server User Name Password The user name and password of the sender to login mail server and send the mail Sender s Mail The sender s mail address 35 Receiver s Mail The receiver s mail address BCC Mail The mail address to receive the mail also Mail Port The port of the mail service Default is 25 FTP Setting FTP Server The IP address or URL of the FTP server User Name Password The user name and password to log in the FTP server FTP Port The port of the FTP service Default is 21 Store Path The path to save the sent video file FTP Mode Select PORT or PASV to fit the FTP server PORT is for sending file to an Active FTP server PASV is for sending file to a Passive FTP server Auto Create Folder by Date
6. Adjust the Sensitivity To adjust the sensitivity of detection select the level from the pull down list Activate Motion Detection To activate the motion detection enable the Detect Area check box Actions when Motion Detection Is Trigger Select what actions will be taken once the motion detection is triggered in each area e E mail When the motion detection is triggered in this area send the recorded video or snapshot to the specific mail address FTP When the motion detection is triggered in this area send the recorded video or snapshot to the specific FTP site To set the mail account and FTP site please refer to Configuration gt Network Setting gt Mail amp FTP page e Out1 When the motion detection is triggered in this area turn on the Digital Output 1 e Save to SD Card When the motion detection is triggered in this area record the video or snapshot into the local SD card Log If Save to SD Card option has been selected for action you can determine whether send a message to the specific mail address or FTP site E Mail Subject The subject of the E mail will be sent Detection Interval This option provides two functions e The interval time between multiple detections For example if the time set to 10 seconds when the motion detection is triggered at time 10H 05M 10S the next detection will be accepted after 10H 05M 20S The detections between 10H 05M 10S to 10H 05M 19S will not be accepted eo I
7. If select Yes a folder will be created under the Store Path and named with the date and then the video file will be saved in this folder If select No the video file will be saved in the Store Path without folder After set up click Apply to save the settings Test the Settings You can click Test button this device will send a test mail to receiver s mail box or upload a test file to FTP site to make sure the settings of mail or FTP are correct 36 PPPOE Setting If this device connects to an ADSL modem directly and want to use PPPoE connection set the parameters in this page PPPOE Setting Password Send E mail after Dialed E Enable E mail Subject PPPOE From IP Camera PPPoE Connection Select Enable to use PPPoE Type in user name and password for the ADSL connection Send E mail After Dialed If select Enable when connect to the Internet via PPPoE this device will send a mail with the Subject to a specific mail account this mail contains the public IP address of the ADSL connection To set the mail account please refer to Configuration gt Network Setting gt Mail8 FTP page E mail Subject The subject of the E mail will be sent After set up click Apply to save the settings 3 DDNS Setting This device supports DDNS set the parameters in this page Dynamic DNS Setting se DDNS Setting Enable Disable Host Name test dyndns org
8. Web Browser Microsoft IE V7 0 32 bit or above Mozilla Firefox V5 0 or above Opera V10 or above Safari V4 0 5 or above Google Chrome V5 0 or above Suggested Hardware Intel Core 2 Duo 1 66GHz RAM 1GB Graphic card 128MB onboard RAM Specifications are subject to change without notice 3 Product Installation A Hardware Installation Cable Connections A SD Card Slot Inside of camera O Power Jack To connect the included power adapter Network Connector The RJ 45 connector allows connect to the Ethernet network Micro SD Card Slot Insert a Micro SD card if you want to do the event recording in inside of the camera the camera O Terminal Block inside The terminal block provides the following functionalities of the camera Video Output Allows connect to the analog display to output analog video for locally monitoring MIC Input Allows connect to a microphone the connected audio will be heard at the remote site Audio Output Allows connect to an amplified speaker you can hear the voice of the remote site from the speaker Digital I O Digital In and Relay Out 1 Refer to the next sections to connect the cable of Digital I O Video output Audio output and MIC input if you want to use these functionalities 2 Connect Ethernet cable for network connection 3 Connect power adapter to turn on the camera 4 If the camera is PoE model the power adapter is not
9. notifications It provides the interface to eo 1 set of Digital Input Alarm GND The digital inputs for connecting devices that can toggle between an open and closed circuit such as PIRs door window contacts glass break detectors etc When a signal is received the status changes and the input becomes active o 1set of Relay Output N O COM or N C COM The output to Relay switch of the alarm device such as LEDs Sirens etc Digital Input Alarm Input GND Ground Initial status is LOW Alarm Max 50mA 3 3VDC Door Window Contacts Relay Output COM Common pin N O Normally Open Max 1A 24VDC or 0 5A 125VAC N C Normally Close Max 1A 24VDC or 0 5A 125VAC E JO VIDEO_OUT O GND OL O fmc AJO AUDIO_OUT TQ f ALARMIN O O enD TNO Inc v COM no 3 Axis Gimbals Adjustment The gimbals adjustment offers the convenience method to install on the ceiling or wall You can open the case and adjust the lens to the direction as wished The pan tilt and rotation adjustments are provided in this model You can adjust the gimbals with Pan 360 Tilt 75 and Rotation 360 respectively Rotation Adjustment 360 1 Loosen Screw 1 2 Adjust Rotation Gimbals as wished 3 Fasten Screw 1 to fix the gimbals Pan Adjustment 1 Loosen Screw 2 2 Adjust Pan Gimbals as wished 3 Fasten
10. over IP Address 192 168 1 2 Subnet Mask 255 255 255 0 cable to connect these two devices Subnet Mask 255 255 255 0 Gateway Empty Gateway Empty Http Port 80 RTSP Port 554 e Connect the camera to PC with Ethernet cable The camera equips an Auto MDI MDIX network connector you can use a straight or cross over Ethernet cable e Refer to Configuration gt Network gt Network page to configure the IP settings O Please make sure the IP address of PC and camera are in the same subnet Ex 192 168 1 2 and 192 168 1 200 have the same subnet O Set Subnet Mask of PC and camera O Clear the Gateway of PC and camera to empty For example if the IP settings have been configured as the above figure the cameras can be linked with following addresses 53 Connects to an Exist LAN If the camera will be used in a local network LAN and don t allow to access via Internet please refer to the figure below for the connection Intranet LAN Camera 1 IP Address 192 168 1 200 Subnet Mask 255 255 255 0 Gateway 192 168 1 254 Http Port 80 RTSP Port 554 IP Address 192 168 1 201 Subnet Mask 255 255 255 0 Gateway 192 168 1 254 ij 0000 oo So or IP Sharing IP Address 192 168 1 254 Subnet Mask 255 255 255 0 PC IP Address 192 168 1 2 Subnet Mask 255 255 255 0 Gateway 192 168 1 254 Http Port 80 RTSP Port 554 e Connect the cameras to the Switch e Refer to Configuration gt
11. 2 Mega Pixel H 264 CMOS Network Vandal Dome JNC V2619 JNC V2619IR JNC V2619 PoE User s Manual Date 11 10 2010 Firmware Version V1 0 18 Content COMTE Matas a 1 Ws A A 2 2 Product SOS CITI AIO Saad AAA 2 Oa FIOCUCLIASAIATIONSS A A 5 A Hardware Msalato carino 5 A need ce 10 E IPAS SONNEN arrest TR 11 A o PU EIA 13 Os COMMOUI ALI ON rn en ot RS ne De SN D nn Qu 18 PS IS Mo did clado 18 B MIES AUTOM dd 25 C y 10 10 6 OA ad ns nest soso esn eee en ee ces cc sa 30 De EVEN A 40 0 NetWork CONMMGUIANON ascos io do a ae 53 Ae 90 gt 0 LL CR ere ec rc ae nas ee ee te 53 SA A 99 Es trance Inte Melissa 58 A 61 Compatible IS COS DOI de nan anse omiso dom ne D AD One 62 1 Preface This camera is a professional 2 Mega Pixel CMOS network camera which builds in web server User views real time video via IE browser It supports H 264 JPEG and MPEG4 3GPP Only video compression which provides smooth and high quality video The event video can be stored in the SD card and can be playback remotely The IR model equips infrared illuminator to provide good image quality even in darkness The PoE model built in support for Power over Ethernet allows the camera to receive both data and power over a single Ethernet cable This camera is an easy to use IP camera which is designed for security application Product Specifications 2 Mega Pixel CMOS Sensor H 264 MJPEG MPEG4 3GPP Only compression f
12. 7 have enabled UPnP service by default To activate UPnP service in Windows XP please follow the procedure 1 Open the Control Panel from the Start menu 2 Select Add Remove Programs 3 Select Add Remove Windows Components and open Networking Services section 4 Click Details and select UPnP to setup the service 5 The network device icon will be added to My Network Places 6 You may double click the network device icon to access it via IE browser UPnP Port Forwarding Enable or disable the UPnP Port Forwarding function The UPnP Port Forwarding function provides an easy way to configure the NAT Network Address Translation in router If the router equips UPnP Port Forwarding function too this device will ask the router to open the External HTTP Port and External RTSP Port for this device automatically Therefore you don t need to configure the Port Forwarding manually Note Not all routers equip UPnP Port Forwarding function The device will report whether this function is successful after click Apply button After set up click Apply to save the settings 34 Mail amp FTP Setting To send out the event video via E mail or FTP please set up the configuration first Mail 8 FTP Mail Setting IN Male O O CENA Login Method Account Send Mail Server smtp mailserver com User Name test Sender s Mail
13. 92 640x480 320x240 176x144 26 Video System Select NTSC 60Hz or PAL 50Hz to match your local video system TV Output Select the video system of the analog video output signal Select Auto will follow the selection in Video System or select NTSC or PAL manually Streaming 1 and 2 Output Setting Basic Advanced Mode Select the mode to configure the parameters Advanced mode provides more detail parameters for setting Resolution Select the resolution from the pull down list Please refer to the above tables for the supported resolutions Frame Rate Per Second The video refreshing rate per second Select the frame rate from the pull down list Refer to the above tables for the supported highest FPS Video Compression Format Choose H 264 or JPEG format to compress and output the video stream H 264 The video stream will be compressed in H 264 format Choose CBR Constant Bit Rate or VBR Variable Bit Rate in Bitrate Control Mode o CBR Set the Video Bitrate from 32Kbps 8Mbps depend on the upload bandwidth of network The data size of video stream will be limited under the selected bit rate o VBR Set the Video Quantitative from 1 10 the higher value will get better video quality The data size of video stream is no limitation if the upload bandwidth of network is lower than the data size the video will be displayed slowly e GOP Size Set the GOP Group of Picture size If you don t know what value should be
14. D card Note When this event is happen the frame rate of live video and recorded video will be limited to 5FPS The longest continue record period of single video file is 20 minutes and the interval of two video files is fixed with 1 minute After set up click Apply to save the settings 45 I O Setting This device provides Digital Input and Digital Output When the Digital Input is triggered it can send the video or snapshot to specific mail address transmit the video or snapshot to remote FTP server trigger the digital out record video or snapshot into local SD card I O Setting Input 1 Sensor Type N 7 Input i Trigger Action Log E Mail Subject GPIO In Detected Detection Interval 10sec Enable Digital Input detection based on Schedule Time Output Switch Type CO OnOff Switch 8 Time Switch Turn On Time 10 sec g Digital Input Setting Input 1 Sensor Type Select the type of the sensor which connected to the Digital Input N O means Normally Opened this type of sensor will be triggered when it is closed N C means Normally Closed this type of sensor will be triggered when it is opened Input 1 Trigger Action Select the actions when the Digital Input is triggered e E mail When the Digital Input is triggered send the recorded video or snapshot to the specific mail address FTP When the Digital Input is triggered send the recorded video or snapshot to
15. FTP Save to SD card Interval 10 Sendi i 50000 File Mame Snapshot Setup Schedule Select Unselect All Time Click All of the top left of the time table to select or unselect all time The square in green means the time is selected the square in 48 light grey means the time is unselected Select Unselect Specific Time Click the square of the time table to select or unselect the specific time The square in green means the time is selected the square in light grey means the time is unselected Send Snapshot with Scheduled Time Enable Disable To enable or disable the schedule function Snapshot Select the method to send out the snapshot e E mail Automatic send the snapshot to the specific mail address the interval time of the snapshot pictures is depending on the Interval setting FTP Automatic send the snapshot to the specific FTP site the interval time of the snapshot pictures is depending on the Interval setting To set the mail account and FTP site please refer to Configuration gt Network Setting gt Mail amp FTP page O Save to SD Card Automatic save the snapshot into SD card the interval time of the snapshot pictures is depending on the Interval setting Interval The interval time of the snapshot pictures For example if the time set to 10 seconds in the scheduled time the device will send out snapshot every 10 seconds File Name The header of the filename of the s
16. Ls With audio n l Must enable 3GPP Stream in 3G Mobile rtsp test dyndns org 3g Configuration Video Audio Phone Without audio Video Format page rtsp test dyndns org 3gx 57 C Intranet Internet Connects to Internet with Fixed Public IP Address If the camera will be added into a local network LAN and will be accessed via both Intranet and Internet please refer to the figure below for the connection Intranet LAN Internet WAN 4 1 Le l 3G Mobile Phone 4 IP Address 192 168 1 2 Subnet Mask 255 255 255 0 Camera 1 Gateway 192 168 1 254 IP Address 192 168 1 200 Subnet Mask 255 255 255 0 ce Gateway 192 168 1 254 focoooo Http Port 80 ADSL RTSP Port 354 Public IP 60 220 20 250 E z To allow the cameras can be linked through Internet set n the NAT Port Forwarding or Virtual Server as following Camera 2 LAN IP Address 192 168 1 201 Port IP Address Subnet Mask 255 255 255 0 3081 192 168 1 200 a Gateway 192 168 1 254 Router or IP Sharing oa 554 192 168 1 200 Http Port 80 IP Address 192 168 1 254 Sone pad ek ME RTSP Port 555 Subnet Mask 255 255 255 0 192 168 1 201 e Assume the local network will be connected to Internet with ADSL connection first configure the router or IP sharing with the ADSL connection Please refer to the user s manual of router for the configuration e Connect the cameras to the Swi
17. Network gt Network page to configure the IP settings Please make sure the IP address of Router PC and camera are in the same subnet Ex 192 168 1 2 and 192 168 1 200 have the same subnet O Set Subnet Mask of Router PC and cameras O Set Gateway of PC and cameras with the same IP address Usually the Gateway is the IP address of router O Set the IP address of a valid DNS into cameras An invalid DNS will cause the domain name can t be resolved and reached such as email address For example if the IP settings have been configured as the above figure the cameras can be linked with following addresses http 192 168 1 200 Camera 2 http 192 168 1 201 B Internet Only Connects to ADSL with Fixed Public IP Address If the camera connects to Internet with an ADSL modem and the public IP address of ADSL is fixed please refer to the figure below for the connection Internet WAN f Camera IP Address 60 220 20 250 Subnet Mask 255 255 255 0 Gateway 60 220 20 254 Http Port 80 Y A RTSP Port 554 for Y ADSL e Connect the camera to the ADSL modem e Refer to Configuration gt Network gt Network page configure the IP address Subnet Mask Gateway and DNS with the settings that ISP provided for ADSL connection For example if the public IP address is 60 220 20 250 now the camera can be linked with following addresses With audio 3G Mobile rtsp 60 220 20 250 3g Phone Without a
18. are 3 kinds of IP configuration e Fixed IP Public IP or Virtual IP e DHCP Dynamic IP o Dial up PPPoE IP Search is a utility that provides an easier more efficient way to configure the IP address and network settings of the network camera in Local Network LAN It even provides a convenient way to set the network settings for multiple devices simultaneously Moreover IP Search can save the network settings for all devices as a backup and restore them when necessary The software can be installed from the attached software CD 1 Once IP Search has been successfully installed on the computer double click the IP Search icon on the desktop Http Port 0 DNS 1 168 95 1 100 0F 00 00 21 E5 Device Name Subnet Mask 125525523550 DNS 2 1689519721 IP Address 182 168 1 200 O Gateway 192 168 1 254 DNS 3 0 0 0 0 IP Search searches all the network devices which connect to the intranet and lists on the window Click Search button to search again From the list select the device with the MAC Address that corresponds to the device that is to be configured Click and select one of the network devices the network configuration of this device will show on the bottom filling in the IP Address Subnet Mask Gateway and the others 5 Click Set button to complete the configuration settings and save into the device 6 Wait for 1 minute to let the device update the settings and then click S
19. ble Bit Rate III Audio Format 6 711 Link the camera with this address gt rtsp IP Basic Mode Advanced Mode Resolution 1600x1200 Frame Rate Per Second 15 FPS Video Compression Format JPEG v2 Audio Format 6 711 Link the camera with this address gt rtsp IP v2 Link the camera with this address gt rtsp IP 3q Link the camera no audio with this address gt rtsp IP 3aqx Original Video Original Video Select the Original Video from the pull down list The Original Video will affect the selection of Resolution and Video Frame Rate of streaming 1 and 2 please refer to the table below to know the supported resolutions and highest FPS in different Original Video Original Video 1600x1200 15fps Available Resolution and Highest FPS for Streaming 1 2 Output Oia 1600x1200 1280x1024 1280x960 1280x720 800x592 640x480 320x240 176x144 Original Video 1280x1024 22fps Available Resolution and Highest FPS for Streaming 1 2 Output Mia 1280x1024 1280x960 1280x720 800x592 640x480 320x240 176x144 Original Video 1280x960 25fps Available Resolution and Highest FPS for Streaming 1 2 Output DES ele 1280x960 1280x720 800x592 640x480 320x240 176x144 Original Video 1280x720 30fps Available Resolution and Highest FPS for Streaming 1 2 Output Original Video 800x600 30fps Available Resolution and Highest FPS for Streaming 1 2 Output RES elles 800x5
20. d File Setting There are 3 methods to record the event video in SD card or send out via E mail FTP Video When an event Motion Detection or Digital Input Detection is triggered the video will be recorded as still image with AVI format The beginning and ending time of the file is depending on the Pre and Post Record Time Setting Snapshots This option is available when the Video Format of streaming 1 is set as JPEG in Video Format When an event Motion Detection or Digital Input Detection is triggered this device will take a series of snapshot with JPG format The beginning and ending time of the snapshot pictures is depending on the Pre and Post Record Time Setting Snapshot Single This option is available when the Video Format of streaming 1 is setas JPEG in Video Format page When an event Motion Detection or Digital Input Detection is triggered this device will take a snapshot with JPG format Pre and Post Record Time Setting Configure the record time for the event recording file For example if set Pre Alarm as 3 seconds and set Post Alarm as 5 seconds when an event Motion Detection or Digital Input Detection is triggered at time 10H 05M 105S the video will be recorded from 10H 05M 07S to 10H 05M 145 Note Limited by the built in RAM of this device when data is too much or video quality set too high it will cause recording frame drop or decrease the recording time of post ala
21. e External HTTP Port lt registered successfully gt External RTSP Port lt registered successfully gt IP Assignment DHCP If this device behinds a router and the router provides DHCP service using DHCP this device will get all network parameters from the router automatically Static Assign IP address subnet mask gateway and DNS manually Port Assignment Set the ports if necessary If this device will be connected via Internet configure the NAT Network Address Translation in router to match the port assignment HTTP Port Set the port for HTTP connection The default is 80 change the port if 33 you want to use router s NAT Network Address Translation to make this device can be linked from Internet RTSP Port Set the port for transfer the video and audio The default is 554 change the port if you want to use router s NAT Network Address Translation to make this device can be linked from Internet RTP Port Set the port range of RTP port In RTSP mode you may use TCP and UDP for connecting TCP connection uses RTSP Port UDP connection uses RTP Start and End Port UPnP Setting UPnP Enable or disable the UPnP protocol This device supports UPnP if the UPnP service is enabled on your computer the device will automatically be detected and a new icon will be added to My Network Places Note UPnP service must be enabled on your computer The Windows Vista and Windows
22. earch button again to re search the network devices Click and select the network device listed on the window and click Open Web button It will open an IE browser and connect to this device directly You can assign a name to identify the device Type the name in Device Name field click Save and then click Search button the name will be displayed in the list 12 4 Live Video Start the IE browser type the IP address of the network camera in the address field http lt IP of camera gt If the Web Page Port has been changed from 80 type the URL as User name Bam http lt IP of camera gt lt Web Page Port gt Password mm Remember my password IP Camera After link to the camera it will show a dialogue box Key in the user name and password to x log in and open the web page of camera The default user name and password are admin and admin For the first time to view the camera video via IE it will ask you to install the Activex component IP CAMERA Microsoft Internet Explorer Fie Edit View Favorites Tools Help Back x a A ya Search S Favorites L Es Py AE Address 8 http 182 168 1 217 ag This site might require the Following Actives control Click here to install If the installation failed please check the security setting for the IE browser In IE click o
23. evice supports Back Light Compensation 30 enable disable this function by selecting ON or OFF Frame Rate at Night This function can be set at different Frame rate to increase night illumination Set lower frame rate will slower the frame refresh rate but will enhance the night illumination Night mode will be activated automatically depending on lux illumination if set at 15 frame rate when night mode activated at low lux the frame rate will not be more than 15FPS Video Orientation Change the orientation to display the video Default Click Default button will load the default settings 31 Audio Setting This device supports 2 way audio Note the audio will not be smooth when enable SD card recording function simultaneously Audio from Device to Local PC For this device to local PC select Enable and then click Apply to start this function If set to Disable the Voice icon on Live View page is not workable Audio Setting Audio from Local PC to This Device For local PC to this device click Chatting icon on the Live View page Online Visitor i Streaming 1 Language Configuration is Snapshot Record C Network Setting Network Setting 355 255 255 0 Gateway 192 168 11 1 163 95 192 1 HTTP Port 30 RTSP Port RTP Start Port 1024 10000 RTP End Port 1025 10000 UPnP Enable Disable UPnP Port Forwarding Disabl
24. fthe Out is selected for the action the Interval means Digital Output On period For example if Interval set to 20 seconds when the motion detection is triggered the Digital Output will be On and lasting for 20 seconds and then Off automatically Enable Motion Detection in Schedule Time Enable this option will automatic activate the motion detection with scheduled time and stop the detection in the other time Please refer to Schedule page to setup the schedule time 42 Recommendation of Motion Detection Area To ensure the Motion Detection works well and avoid unnecessary trigger please follow the rules to draw the Motion Detection Areas e The moving object larger than the 50 of the Motion Detection Area it will be detected and the Motion Detection is triggered e The moving object smaller than the 50 of the Motion Detection Area it will not be detected and the Motion Detection will not be triggered Recommend use 3 smaller Motion Detection Areas to replace a large area The moving object smaller than the 50 of the The moving object larger than the 50 of the motion motion area it will not be detected area it will be detected and the motion is triggered To detect the smaller moving object use 3 motion areas to replace a large motion area refer the figure below The moving object will be detected when it is in any of the 3 motion areas and the motion is triggered Recor
25. he NTP server every 6 hours Synchronize with PC s time Select this option will synchronize the device time with the PC s time Manually Input Date and Time Manually input the date and time The date and time remain the same Keep the current date and time without change After set up click Apply to save the settings 20 User Management You can add remove and manage the users in this page This device supports 3 user groups eo Administrator The administrator can view operate and configure all functions and settings of this device Guest The users in Guest group can only view the live video in Live View page Anonymous The anonymous user can only view the live video in Live View page The privilege is same as Guest group User Management Anonymous User Login To allow user visit this device without login select Yes and then click Setting to enable this function Add User To add a new user type the user name and password then click Add Set to save the user User List This table lists the current users 21 Edit To change the username and User Setup password click Edit and modify the Username admin administrator or user in the pop up window Password 4040400604 Confirm 46004000 Remove To remove the user click Remove 22 System Upgrade This page allows user to upgrade firmware restart device and restore the factory default settings System U
26. n Tools gt Internet Options 2 Click on Security Tab gt Custom Level 3 In Security Settings under Download unsigned ActiveX controls select Enable or Prompt 4 In Security Settings under Initialize and script ActiveX controls not marked as safe select Enable or Prompt 5 When pop up window with warning message click Yes to save the settings 13 IP CAMERA Microsoft Internet Explorer Internet Options General Security Privacy Content Connections Programs Advanced File Edit View Favorites oe 3 l 1 Select a Web content zone to specify its security settings Mail FE News T Back Mar d Pop up Blocker QQ amp Manage Add ons Internet Local intranet Trusted sites Restricted Address El http 1192 168 1 21 Se de sites Internet i This zone contains all Web sites you haven t placed in other zones Security level for this zone windows Update windows Messenger Internet Options Custom Custom settings To change the settings click Custam Level To use the recommended settings click Default Level Security Settings Security Settings Settings settings Disable Enable Prompt E Download unsigned Activex controls Disable Enable E Enable 6 Binary and script behaviors Administrator approved Disable Disable Enable Disable Enable oma E Run Activex contrals and plug ins
27. napshot For example if you input Camera in this field the filename of the snapshot will be Camera yyyymmdd hhmmss jpg yyyymmdd indicates the year month and date hhmmss indicates the hour minute and second After set up click Apply to save the settings 49 Micro SD Card In this page if a Micro SD Card is inserted you can record the video once an event is triggered play back and manage the recorded files in the Micro SD Card Note The Micro SD card must be formatted as FAT or FAT32 file system The use of the Micro SD Card will affect the operation of this device slightly such as affecting the frame rate of the video Install Micro SD Card Make sure the direction and pushing Micro SD card into the slot completely Record Enable Save to SD Card option in Event Setting or I O Setting page the video can be recorded into the card once the event is triggered When the Micro SD Card is full it will remove the earliest file automatically Playback When open this page the date of recorded files shows 90 Recorded Files in SD Card 5D Card lt lt 239M 239M gt gt Format SD Card Keep 1 2 3 4 days 2010 06 03 Time Video Event Type 113932m avi 113942m avi 113952m avi 114002m avi 11401 2m avi 114022m avi 11403 2m avi 114042m avi 114052m avi Ba a a A Gr Gr O O GO 114102m avi The avi extensi
28. necessary The camera will get the power from the PoE injector or PoE switch PoE Power over Ethernet is a technology that integrates power into a standard LAN infrastructure It enables power to be provided to the network device such as an IP phone or a network camera using the same cable as that used for network connection It eliminates the need for power outlets at the camera locations Please follow the below figure for the connection PoE Switch or PoE Injector To Network cl Lol POE Network Camera Ethernet Cable e Data only Ethernet Cable Mixed data and power 5 Set up the network configurations according to the network environment For further explanation please refer to Network Configuration chapter Analog Video Audio Connections The terminal block inside of the camera provides analog video and audio functionalities You can connect the wires of connector to this terminal block to output these signals Analog Video Output Connects to an analog monitor Microphone Input Connects to an po MIC_IN microphone AUDIO OUT GND Audio Output VIDEO_OUT GND Connects to an MIC_IN amplified speaker LES aubio_ouT I O Connections The terminal block inside of the camera also Digital Input and Relay Output You can connect the wires of connector to this terminal block to output these signals The I O connector used in application for e g motion detection event triggering alarm
29. ollowing settings are available when manually turn on the Relay Out on Live View page Output Switch Type Select the type of the Digital Output switch On Off Switch will be triggered to On or Off constantly Time Switch will be triggered to On and lasting for a period time and then Off automatically Turn On Time If the Digital Output switch is a Time Switch the lasting time of the On period can be set here After set up click Apply to save the settings 47 Schedule This function provides the schedule for the following e Send Snapshot with the Scheduled Time automatic send a snapshot to the E mail address or FIP site or save to SD card The interval time can be set eo Activate and Stop the Motion Detection with Scheduled Time if the Enable Motion Detection in Schedule Time option in Configuration gt Event Handling gt Event Setting gt Motion Detection page is enabled the motion detection will be activated with scheduled time and stop the detection in the other time e Activate and Stop the Digital Input Detection with Scheduled Time if the Enable Digital Input Detection in Schedule Time option in Configuration gt Event Handling gt I O Setting page is enabled the Digital Input detection will be activated with scheduled time and stop the detection in the other time Schedule SS SER SSR ER Sate ne nm Enable Disable Snapshot V E mail
30. omdeft Bottom Right Text 9 Enable Disable MOSD_Display Text Edit Time Stamp Enable this option will display the date and time on the video Position Select the display position of Time stamp Text Enable this option will display the OSD string on the video Text Edit Click this button to open Text Edit dialog window You can change the OSD string and adjust the size and alpha of ext Edi the text After editing click Upgrade button OSD Display 12 100 19 Time Setting Server Time 2010 6 3 11 5 34 Time Zone GMT 08 00 Date Format 9 vyfmm dd mm dd yy dd mm yy Time Zone GMT 08 00 Synchronize with NTP Server NTP Server 198 123 30 132 Update Schedule 6 Hour Time Shift 0 Minutes 1440 1440 2 Synchronize with PC s Time Date 2010 6 3 mme 11 5 44 Manually Input Date and Time Date 2010 6 3 Tame 11 1 45 The date and time remain the same Date Format Select the format to display the date Time Zone Select the GMT to match your time zone Synchronize with NTP Server Select this option and type the IP address of a NTP Network Time Protocol server this device will synchronize the time with the NTP server via network eo NTP Server Type the IP address or URL of the NTP server e Update Schedule Select the interval for the update time For example if select 6 Hours this device will synchronize the date and time with t
31. on name of the file means this file is a video file the jpg extension name means it is a picture file Click the file to start Microsoft Media Player to play it If the bandwidth is lower for playback directly please right click on the file and select Save As to download it to the PC and then play the downloaded file with Microsoft Media Player Note the video format is compressed with H 264 the PC must install the H 264 decoder You can install FFdshow from the included CD for the decoder Delete Recorded File To delete the recorded file check the check box of the file then click Del button Format SD Card If you want to empty the Micro SD card click Format SD Card to format the card To view the recorded files just click the date it will show the list of the recorded files 91 Auto Deletion Recorded Files in SD Card SD Card lt lt 239M 239M gt gt Keep 1 2 3 4 days If enable this function the recorded files before the selected day will be deleted automatically After select the option click Apply to save the setting 92 6 Network Configuration A Intranet Only Connects to PC Directly If you want to connect the camera to PC directly for the very first time setup please refer to the figure below for the connection E i Ethernet Cable Camera PC This device supports Auto MDI MDIX IP Address 192 168 1 200 you can use a Straight or cross
32. ormats Supports resolution up to 1600x1200 H 264 MJPEG MPEG4 3GPP Only triple streaming Self Contained HTTP Web Server providing Internet capability for remote access Day amp Night functionality for 24 hours surveillance auto activate IR illuminator in low illumination IR model Infrared radiant distance up to 12 meters IR model Unbreakable housing support IP66 water proof standard Built in PoE splitter support for Power over Ethernet PoE model Supports SD card for local event recording 2 way audio Online firmware upgrade Recorded files compatible with Microsoft Windows Media Player CPU RAM ROM ARM 9 32 bit RISC 256MB 16MB Vari focal 2 7 9mm Mega Pixel lens Day Night IR model Mechanism IR Cut Filter ICR IR Distance IR model 12 Meters 3 Axis Gimbals Rotation 360 Adjustment Pan 360 Tilt 75 Water Proof IP 66 standard Power Supply Normal model DC 12V 1A PoE model built in PoE Splitter Use PoE PoE Injector IEEE 802 3af Or use Power Adaptor DC 12V 1A Power Consumption Max 8 Watt Dimensions 0134 x H108 mm Ethernet 10 100 Base T Video Resolution 1600x1200 1280x1024 1280x960 1280x720 Frame Rate Up to 15FPS 1600x1200 22FPS 1280x1024 25FPS 1280x960 30FPS 1280x720 Connection Up to 10 clients simultaneously Video Format Video AVI Snapshot JPEG Video Playback Web browsing requirement Windows 2000 XP Vista Windows 7
33. pgrade 1 0 14 As 1 Browse Firmware Upgrade The firmware can be upgraded online To update the firmware click Browse to select the new firmware file and then click Upgrade to the procedure Reboot System To restart the device click Reboot and then click Yes on the prompted window Factory Default To load the factory defaults click Default and then click Yes on the prompted window Note all settings including User account Network A V and Event settings will be restored to the factory defaults 23 System Logs System Status Logs Moton Trigger Logs System Logs Digital In Trigger Logs All Logs System Status Logs Click the View button on the right side to list the logs of system status Motion Trigger Logs Click the View button on the right side to list the logs of motion detection Digital In Trigger Logs Click the View button on the right side to list the logs of digital input detection All Logs Click the View button on the right side to list all logs 24 B Video Audio Setting Video Format This device supports H 264 MJPEG and MPEG4 only for 3GPP streaming Triple Mode and Triple Streaming set the video parameters in this page Original Video 1600x1200 15fps Video System NTSC 60Hz TW Output Auto Auto Based on the Video System Video Format 1 Basic Mode Advanced Mode CBR Constant Bit Rate VBR Varia
34. rk Setting gt Network Setting lt 3GPP path gt The name of the 3GPP video stream If your 3G mobile phone or PDA does not support the viewing of RTSP streaming you can view the camera with http connection To do this use a Java compliant browser such as Opera and type the URL as following to link and view the live video http lt Public IP of camera gt lt HTTP port gt Jview html lt Public IP of camera gt The public IP address of the camera lt HTTP port gt The HTTP port of the camera This port is assigned in Configuration gt Network Setting gt Network Setting Note Do not use the IE browser in 3G mobile phone because it doesn t support Java 28 After set up click Apply to save the settings 29 Image Setting Image Setting Image Setting i 0 0 Backight Compensation DON OFF Fr T Frame Rate at Night Max 15 frame rate Video Orientation Clip Mirror Privacy Mask For the security purpose there are 3 areas can be setup for privacy masks the masked areas will not be shown in Live View and recorded file To set up or clear the privacy mask click Draw Clear Area button and then use mouse to drag the area on the video After the configuration click Save Area Settings button to save the settings Image Quality Brightness Contrast Sharpness You can adjust these parameters to get clear video Backlight Compensation This d
35. rm Postalarm When Dis connected Record Video into SD Card Detect IP Enable Disable IP Address www google com Detection Interval 30sec When Dis connected Record Video into SD Card This device supports 4 kinds of event detections eo Motion Detection e Digital Input Detection e Network Disconnection Detection This event will be triggered once the wire network is disconnected O Specific IP Detection This event will be triggered once the network connection with a specific IP address is disconnected Motion Detection This device allows 3 areas for detect motion When motion detection is triggered it can send the video or snapshot to specific mail address transmit the video or snapshot to remote FTP server trigger the digital out record video or snapshot into local SD card Set Area Draw Clear Areal Draw Clear 4Areaz Draw Clear Area3 WipetectAreat Memai Cler Flout save to 5D card ipetect ares 2 emai Vier E Outi Save to SD card Wipetect area 3 e mail Mere Clouti Save to SD card Log E mail FTP E Mail Subject IP Camera Warning Detection Interval 10sec a period of time between every two motions detected I rl Enable motion detection based on Schedule Time Set the Area To set up or clear the motion area click Draw Clear Area button on Set Area row and then use mouse to drag the area on the video
36. rm To avoid the frame drop situation please reduce the bitrate of the video We recommend connect the device in LAN Local Network and set the video as CBR and Bitrate less than 1 5Mbps Network Disconnection Detect When Dis connected Record Video into SD Card After enable the check box of Record Video into SD Card when the wire network is disconnected it will save the video into local SD card Note When this event is happen the frame rate of live video and recorded video will be limited to 5FPS The longest continue record period of single video file is 20 minutes and the interval of two video files is fixed with 1 minute 44 Specific IP Detection For the use of recording software this device supports the detection of the connection of this device and PC Whenever the connection is disconnected it records the video to local SD card to make sure the video recording is continuous Detect IP Enable Disable IF Address 192 168 1 10 Detection Interval 30sec When Dis connected W Record Video into SD Card Detect IP Enable Disable Select to enable or disable this function IP Address The IP address or URL of the PC which installed the recording software Detection Interval The interval time of the detection When Dis connected After enable the check box of Record Video into SD Card when the network connection of PC is disconnected it will save the video into local S
37. set please set it to 1XFPS JPEG The video stream will be compressed in MJPEG format e Quality 5 levels for select The higher quality will get bigger file size RTSP Path Assign a name to identify this video stream When view the video stream with RTSP connection the URL should be rtsp lt Public IP of this device gt lt RTSP port gt lt RTSP path gt 2 3GPP Streaming Output Setting Enable Disable 3g 3GPP Path Link the camera with this address gt rtsp IP 3q Link the camera no audio with this address gt rtsp TIP 39x After enable the 3GPP streaming it will enable this device to send out the video in 3GPP format and you can view the live video on the 3G mobile phone Since the bandwidth of 3G is not fast usually the 3GPP streaming will be set to the following configuration e Resolution Fixed to 176x144 o Frame Rate Fixed to 5FPS e Video Format Fixed to MPEG4 e Audio Format Fixed to AMR 3GPP Path Assign a name to identify the 3GPP video stream To view the live video with a 3G mobile phone or PDA open Streaming Player or web browser in the mobile phone type the URL as following to link and view the live video rtsp lt Public IP of camera gt lt RTSP port gt lt 3GPP path gt lt Public IP of camera gt The public IP address of the camera lt RTSP port gt The RTSP port of the camera This port is assigned in Configuration gt Netwo
38. t Event Handling gt I O 17 5 Configuration Click Configuration button to get into the configuration page Click Live View button to back to the Live View page A System System Information Set up the camera name select language and set up the camera time IE Information System Information LED Indicator Default Language O Simplified Chinese Topteft Top Right C Bottom Left C Bottom Right 9 Enable C Disable OSD_Dis ola Text Edit 2010 6 3 11 5 34 Time Zone GMT 08 00 yy mm dd C mm dd yy C dd mm vy Time fone GMT 08 00 Synchronize with NTP Server NTP Server 198 123 30 132 Update Schedule 6 an Hour C Synchronize with PC s Time C Manually Input Date and Time Date 2010 6 3 Times 11 1 45 C The date and time remain the same 18 Server Information IP Camera Show on Status Bar ON E OFF Traditional Chinese Simplified Chinese MAC Address The MAC address of the Ethernet network card in the device Server Name You can type a name into this field to identify this device Show on Status Bar Determine whether show the server name on the Status Bar LED Indicator Determine whether light on or turn off the network and power status LEDs on the device Default Language Select the default language for the user interface OSD Setting Time Stamp Enable Disable Top Left C TopRight Bott
39. tch Refer to Configuration gt Network gt Network page to configure the IP settings e Configure the cameras with different IP address Ex assign camera to 192 168 1 200 and assign camera2 to 192 168 1 201 Please make sure the IP address of Router PC and cameras are in the same subnet Ex 192 168 1 2 and 192 168 1 200 have the same subnet 58 e Set Subnet Mask of Router PC and cameras O Set Gateway of PC and cameras with the same IP address The Gateway is the IP address of router O Set the IP address of a valid DNS into cameras An invalid DNS will cause the domain name can t be resolved and reached such as email address e Configure the cameras with different RTSP port Ex assign camera with port 554 and assign camera2 with port 555 e To allow the cameras can be linked through Internet set router s NAT Network Address ETT Port Forwarding or Virtual Server as following WAN WAN Side LAN Side Pon protocoi iP agarose Por Proc 3081 3081 TCP TCP 102 168 1 200 80 TCP Port for Web page Camera 1 Port for Video and 192 168 1 200 554 TCP Audio 3082 192 168 1 201 80 TCP Port for Web page Camera 2 Port for Video and TCP 192 168 1 201 555 TCP Audio For example if the IP settings have been configured as the above figure the cameras can be linked with following addresses Clients in Camera Link Address Intranet Camera 1 1 Camera 1 http 192 168 1 200 D PC1
40. the specific FTP site To set the mail account and FTP site please refer to Configuration gt Network Setting gt Mail FTP page Out1 When the Digital Input is triggered activate the Digital Output 1 Save to SD Card When the Digital Input is triggered record the video or snapshot into to SD card Log If Save to SD Card option has been selected for action you can determine 46 whether send a message to the specific mail address or FTP site E Mail Subject The subject of the E mail will be sent Detection Interval This option provides two functions e The interval time between multiple detections For example if the time set to 10 seconds when the Digital Input is triggered at time 10H 05M 10S the next trigger will be accepted after 10H 05M 20S The triggers between 10H 05M 10S to 10H 05M 19S will not be accepted Ifthe Out is selected for the action the Interval means Digital Output On period For example if Interval set to 20 seconds when the Digital Input is triggered the Digital Output will be On and lasting for 20 seconds and then Off automatically Enable Digital Input Detection in Schedule Time Enable this option will automatic activate the Digital Input detection with scheduled time and stop the detection in the other time Please refer to Schedule page to setup the schedule time Digital Output Setting This section is for setup the parameters of Digital Output Note The f
41. tion Phone With audio gt Video Audio gt Video rtsp test dyndns org 555 3g Format page Without audio rtsp test dyndns org 555 3gx Camera 1 Camera 2 60 7 Factory Default To recover the default password and other settings please follow the steps 1 Power off this device 2 Remove the cover of device 3 Push the Factory Default Button as shown on the picture below and keeping push it and don t release Factory Default Button 4 Power on the device Don t release the button during the system booting 5 It will take around 30 seconds to boot the device 6 Release the button when the device finishes proceed 7 Re login the device using the default username admin and password admin 8 The IP address is probably restored to the default in this case use IP Search utility to search the device The default IP address is 192 168 1 200 61 Compatible List of SD Card The Compatible List of SD Card Recommended Micro SD Card SanDisk 128M SanDisk 16G SanDisk 256M SanDisk 32G SanDisk 512M Transcend 4G 62
42. udio rtsp 60 220 20 250 3gx Must enable 3GPP Stream in Configuration gt Video Audio gt Video Format page 99 Connects to ADSL with Floating Public IP Address PPPoE If the camera connects to Internet with an ADSL modem and the public IP address of ADSL is variable the camera can use PPPoE function for the connection Internet WAN SS Camera 3G Mobile Phone Configure the PPPoE Setting A focoooo ADSL Connect the camera to the ADSL modem Refer to Configuration gt Network gt PPPoE page to configure the PPPoE settings The camera will automatic dial up and get the public IP address from ISP If you have enable Send Mail After Dialed function the camera will send an email to tell you the current public IP address For example if the public IP address is 60 220 20 250 now the camera can be linked with following addresses With audio 3G Mobile rtsp 60 220 20 250 3g Phone Without audio rtsp 60 220 20 250 3gx Must enable 3GPP Stream in Configuration Video Audio Video Format page Using DDNS Function Since the public IP address is variable you can enable DDNS function to get a fixed URL to instead of the IP address refer to Configuration gt Network gt DDNS page to configure and enable the DDNS function 56 After enable the DDNS assume the registered URL is test dyndns org now the camera can be linked with following UR
43. w Full Screen Click this button or double click the video the video will change to full screen mode Press Esc key or double click the video again it will back to normal mode Snapshot Click this button to take snapshot of the video The image will be displayed in a pop up window click H to save as a jpg picture Record Click this button to record the video into the local PC It will ask you where to save the video To stop recording click this button again The saved video format is AVI The recorded file can be played by Microsoft Media Player Note H 264 decoder must be installed to play the recorded file You can install FFdshow from the included CD for the decoder Chatting The camera supports 2 way audio Click this button then you can use microphone which connected to the PC to talk to the camera side Voice Click this button to turn on the audio from camera Click again to turn off it Digital Zoom Click this button a pop up window appears You can enable M Enable digital zoom disable the digital zoom and Zoom Factors 100 adjust the ratio Relay Out ON OFF Switch Click the button to manually turn on off the Relay via the built in Digital Out Relay Out Time Switch Click the button to manually turn on the Relay via the built in Digital Out after the interval time is passed the Relay will be turned off automatically The interval time can be set up in Configuration g
Download Pdf Manuals
Related Search