Home

Infrared Thermometer SCANTEMP 440 User manual

image

Contents

1. idle for more than 60 sec unless in PRB mode English 7 OPERATING INSTRUCTIONS Thermocouple Probe Scan Function Press the mode key 8 until PRB appears on the LCD Connect the thermocouple with ocanlTemp440 s thermocouple socket 10 and put the probe in or on the target the temperature will be displayed beside the PRB icon on 3 This mode can only be reference when thermometer probe is connected PRBI368 The measurement range 64 to 1400 C ScanTemp440 will automatically shut off if left idle for more than 12 min in PRB mode A After measure high temp the probe may remain HOT for a while 8 English OPERATING INSTRUCTIONS Other Function Emis C F O Lock Oh Mode D gt Press Lock key for infrared LOCK In Default Max Min mode ON OFF DIF res AVG PRB mode Press C F key for C or transferred Press Lock key for Backlight In all modes First function ON OFF hold on the Meas key Press C F key for laser function ON OFF English 9 BATTERY The ScanTemp440 incorporates visual low battery indication as follows Ee EF YX Battery OK Battery Low Battery Exhausted Measurements Battery needs to be Measurements are are possible replaced measurements not possible are still possible A When the Low Battery icon indicates the battery is low the battery should be replaced immediately with two AA 1 5V batteries Please note I
2. Infrared Thermometer SCANTEMP 440 User manual A CE INTRODUCTION The ScanTemp440 infrared thermometer is a non contact infrared thermometer with Thermocouple connector For the infrared part simply aim the thermometer at the target and press the measurement button to display the surface temperature in less than a second Plug in the specific thermocouple not included ScanTemp440 may take contact temperature as high as 1400 C The distance to target diameter ratio field of view is 11 1 For accurate reading please make sure the target size is smaller than the spot size 2 English Distance D to Spot size S D S 11 1 72in 6 48in 36iN 3 24in 4510 1 08in 0 5m 0 05m CEA 1m 0 09m 3m 0 27m English FEATURES Long Battery Life Use the most affordable and available battery AA size instead of the low capacity 9V battery Large LCD Screen with bright amber color Backlight Friendly User Interface 4 Key with trigger with high end arithmetic Max Min and DIF AVG mode Auto Power Off in 1 minutes Precision K type Thermocouple Thermometer inside 4 English SAFETY CAUTIONS Z EMCIRFI Readings may be affected if the device is operated within radio frequency electromagnetic field strength of approximately 3 volts per meter but the performance of the instrument will not be permanently affected LaseRRADIATIONDONOT Never point the device STARE INTO BEAM kind Ga
3. n Pace towards anyone s eyes CAUTION CLASS 2 LASER RADIATION WHEN OPEN Max Output lt imW Wavelength 636 6650nm aneis wn a CR aet aat O D Keep away from baby and children Do not leave the device near objects of high temperature After measure high temp the probe may remain HOT for a while gt Do not submerge any part of the ScanTemp 440 The thermometer is NOT watertight Please keep the unit dry and away from water English 5 PARTS DESCRIPTION x Simply aim the ScanTemp440 at the measure target and press the Meas key to display the surface temperature Infrared Lens Laser option Thermocouple Socket Battery Cover The Default Screen as follow 6 English OPERATING INSTRUCTIONS Infrared Function Scan Temp440 is supplied with a default emissivity of 0 95 gt Press Mode key 5 for scrolling more display function as follows Press emissivity key 1 key to adjust the emissivity The emissivity can be changed from Keep press Mode key 5 key for the Maximum MAX Minimum MIN Different between MAX and MIN DIF and Average AVG readings during the last measurement period Press Down key 2 or Up key to change the High Alarm HAL or Lo Alarm LAL For example When the reading 27 C lt LAL 27 1 C the Low icon will flash and you will hear a beep sound The measurement range 60 to 500 C ScanTemp will automatically shut off if left
4. on gt f the error message remains please contact the Service Department for further assistance English 11 SPECIFICATIONS Item Infrared Scan function Thermocouple Probe Scan function Measurement 60 to 500 C 64 to 1400 C Range 76 to 932 F 83 2 to 2552 F Infrared 2 of reading or 2 1 of reading or 1 Accuracy C whichis greater C which is greater Operating 7 i to 50 C 32 to 122 F Storage Range 20 to 65 C 4 to 149 F 95 RH Time Distance to 5 1 Spot size Emissivity 0 10 1 00 step0 01 Update 14Hz Frequency l Mode MAX MIN dIF AVG HAL LAL PRB Lock Battery Life Typ 360 min 270 hours continuous use Dimensions 30 x 42 9 x 138 mm Weight 137 grams including batteries AA 2pcs without Laser and Back Light Note Subject to change without notice 12 English
5. t is important to turn the instrument off before replacing the battery otherwise the ScanTemp440 may malfunction A Dispose of used battery promptly and keep away from children Cleaning and Storage M The ScanTemp440 should be stored at room temperature between 20 to 65 C M The lens should be kept clean at all times The sensor lens is the most delicate part of the ScanTemp The lens should be kept clean at all times care should be taken when cleaning the lens using only a soft cloth or cotton swab with water or medical alcohol allowing the lens to fully dry before using the ScanTemp440 10 English TROUBLE SHOOTING LCD display Problem amp Solution Low Battery icon indicates the battery is low gt The battery should be replaced with two AA LR6 1 5V batteries immediately Please check the model with without this function gt Replace the battery Hi is displayed when the temperature being measured is outside of the settings of HAL gt Please reset the HAL or select target within specifications Lo is displayed when the temperature being measured is outside of the settings of LAL gt Please reset the LAL or select target within specifications For all other error messages it is necessary to reset the Scan Temp440 gt To reset the Scanlemp440 please wait the instrument automatic off remove the battery and wait for a minimum of one minute reinsert the battery and turn

Download Pdf Manuals

image

Related Search

Related Contents

CIRE d`ABEILLE en pain  Philips BDM3270QP  安全使用マニュアル  orabond 125  POWERPOD 820 - Total Sonic  

Copyright © All rights reserved.
Failed to retrieve file