USER MANUAL SUPPLEMENT for the CryptoPhone 300T Thuraya
Contents
1. select the SG2520 and click Next Now select a comport default COM6 click Finish again and close the settings dialogue Operation Encrypted calls over the satellite phone After you have successfully paired your CryptoPhone with the Thuraya satellite phone you can place and receive secure calls via the Thuraya satellite network Make sure your Thuraya phone has sufficient satellite coverage to place a call Encrypted calls are conducted over a data connection which requires slightly better satellite coverage than for a voice call See the Thuraya phone manual for details on satellite coverage To switch the CryptoPhone 300 from GSM to satellite mode open the CryptoPhone secure phone application by either selecting it from the Start menu or by holding down the center button for three seconds On the CryptoPhone secure phone screen press the Menu soft key on the display Select Settings and select SG2520 instead of Built in GSM as the Line Type Then change the Bluetooth port to COM6 default and click OK The CryptoPhone will say Initalizing switching to Ready after about 15 seconds IMPORTANT To make encrypted calls the SG 2520 must be in sat mode If the satellite phone is in GSM mode then the CP300 will report connection error To make an encrypted call via the satellite phone simply enter the number of the other party s CryptoPhone and press the2. Talk button just like you would when making a secure GSM call Call setup over Thuraya takes a longer than over normal mobile phones Please be patient and wait a bit longer then you usually would for the call to go through To receive an encrypted call via the satellite phone the two phones must be paired and connected as described above When a secure call is coming in the CP300T will ring a few seconds after the satellite phone started ringing Press the Talk button to accept the call just like you would when receiving a secure GSM call
3. USER MANUAL SUPPLEMENT for the CryptoPhone 300T Thuraya satellite option This user manual supplement describes how to connect a CP 300T to a Thuraya SG 2520 satellite phone via encrypted Bluetooth link First steps Pairing the SG 2520 satellite phone with the CryptoPhone 300T If you use a specific satellite phone with your CryptoPhone 300T for the first time you need to pair the two devices via Bluetooth The steps required for pairing an SG 2520 and a CP300T are 1 On the SG 2520 satellite phone choose Menu then select Connectivity then Bluetooth Check the show and Dial up network items and wait for Bluetooth to initialize 2 On the CryptoPhone 300 select Settings then Connections then Bluetooth Check the make device visible item After doing so select the Devices tab and click on Add new device Wait for the Bluetooth scan to complete Your phone should show an SG2520 in Bluetooth range Now select SG2520 then click next to enter a numeric pass code since the SG 2520 can only respond with numeric codes 3 On the SG 2520 satellite phone a popup window will appear Type the pass code that you just entered on the CP300 in the popup window 4 On the CryptoPhone 300 check the serial port checkbox in the services to use from device screen and click Finish Then select the Com Ports tab select new outgoing port
Download Pdf Manuals
Related Search