SPHERICAL TRANSPARENCY ILLUMINATOR LE6 USER MANUAL
Contents
1. ER LUXM ESSER TEST CHARTS i ILLUMINATOR LE 6 100 l ON Note The photometer that measures the light density in the LE6 is a luxmeter which originally was developed for light engineering and scientific use It therefore also enables the measurement of light intensities in a klx range which can not be reached by the LE6 8 Q Image Engineering 3 5 LEO user manual ESSER TEST CHIARTS www image engineering de REMOTE CONTROL The remote control consists of two toggle buttons which are ADJUSTMENT OF marked with 70 100 and df IREUMINATION LEVEL The button 70 100 button shifts the voltage to 70 or 100 of the maximum The 70 setting is only a stand by mode when you are not using the illuminator for measurement The 100 is the mode for measurement At the 70 mode the illuminator runs with a color temperatur of app 2900K In the RAS SHIFT OF measurement mode 100 it works with 3200K VOLTAGE The button is for the adjustment of the illumination K level By pressing the toggle button to the left the value decreases By pressing the toggle button to the right the gt value increases to the maximum If you double klick the toggle button to the left the illumination level will be reduced to the minimum level By double clicking the toggle button to the right the illumination level will be raised up to the maximum USB INTERFACE With the aid of the USB Interface the light intensity can be measu2. LEG user manual ESSER TEST CH MRTS www image engineering de SPHERICAL TRANSPARENCY ILLUMINATOR LE6 USER MANUAL STARTING UP 1 Plug the power supply into the socket which is located on the back of the illuminator Plug in the remote control for a more convenient adjustment of the illumination Push the power switch on the front of the illuminator If necessary the luxmeter can be switched on or off The switch for the luxmeter display is located directly next to the power button EE 1 POWER LUXM ESSER TEST CHARTS ILLUMINATOR LE 6 100 C l ON VOLTAGE MIN LIGHT Q Image Engineering 1 5 LEG user manual ESSER TEST CHARTS www image engineering de ILLUMINATION LEVEL The unit for the illumination level can be set with the rotary knob If using a USB interface set the marked position to USB The other positions are B A lt 20 x C 2 lt 200 Ix D La lt 2 klx E 2 lt 20 klx F a lt 200 klx The values are shown in the display above the rotary knob Depending on the setting of the rotary knob the illumination level is displayed BSI POWER LUXM ESSER TEST CHARTS ILLUMINATOR LE 6 100 O O l ON ON VOLTAGE MIN LIGHT Q Image Engineering 2 5 LEG user manual ESSER TEST CH MRTS www image engineering de ILLUMINATION The illumination level varied by turning the crank below the Voltage display or with the button on the remote control POW
3. red and controlled with a Windows PC The rotary knob has to be set to the USB position 8 Q Image Engineering 4 5 LEGO user manual ESSER TEST CHIARTS www image engineering de REPLACING THE BULB Attention Please disconnect the power supply before replacing the bulb 1 Pull the drawer out a little using the two grips at the front Please be careful with the cables which are fixed to the drawer Release the grounding cable from the drawer cable color yellow green Please pull the bulb out carefully When replacing the bulb do not touch it directly with your fingers Otherwise the durability of the bulb is reduced We recommend using a tissue 5 Fix the grounding cable on the drawer Make sure the luxmeter cable has no contact with the bulb Oder Make sure the luxmeter cable is not lying on top of the bulb 6 Push the drawer back into the regular position Please make sure tthat there aren t any cables jammed between the drawer and the illuminator 8 Q Image Engineering 5 5
Download Pdf Manuals
Related Search