OWNERS MANUAL
Contents
1. and without interference 2 Check whether the front and rear the shock absorber is deformed or leakage or not 3 Check whether the front suspension and the rear flat fork is fastened in place 4 Hold the vehicle when checking 5 Repair and replace parts in time when finding that negative phenomena 6 Contact with the dealer when the situation is out of control Front brake inspection Check whether the front brake installation is firm the braking effect is valid 1 Front brake handle is mounted on the right side 2 The brake is working well if backward movement of the brake handle is in the top 20 30mm 3 Check if the tire rotation is good after releasing the brake lever 4 Contact the dealer for the neec o brake maintenance 5 The front brake lever is with parking feature as well Use it when parking Rear brake inspection Check whether the rear brake installation is firm he braking effect is valid 1 The rear brake is mounted on the left hand or on the right foot 2 The brake is working well if backward movement o the brake handle is in the top 20 30mm or downward movement of the top of the foot brake lever 20 Sdmm 3 Put the brake lever or foot brake lever back into place quickly and check if the tire rotation is good when the force is removed 4 Contact the dealer for the need of brake maintenance 5 Inspect the brake shoe regularly and replace if timely when it is worn out as the brake shoe is a worn piec2. have may differ from the picture shown in this manual Safety warning This vehicle is not a toy Rider under16 years old must use this product under adult s supervision Children must be trained before driving This is very important Be sure of children s ability to forbid the risk This is very important Children must understand the manual and the importance of warnings on the manual User must read the owner manual carefully and understand the content of the manual Incorrect operation of this off road two wheel vehicle will result serious injury or even death Age limit warning See aluminum warning plate on the ATV This product is not intended for OFF ROAD use Please get off the vehicle and walk with it when crossing the roads 10 Never ride with more than one person 11 Never attempt to operate this vehicle while under the influence of alcohol or drugs avoid injury or death 12 Please control the speed do not drive at excessive speed 13 The vehicle is not allowed to use in the adjustment or maintenance period 14 Be sure the vehicle is in a good condition before using it 15 Do not modify the vehicles or charige the spare parts This is unsafe and illegal 16 The accelerating installation of the vehicle has been set Users should not adjust it which may result in serious injuries and death 17 Before riding please wear the safety nelynet gloves protection dress and footwear to ensure the safe
3. M 12 PradueLName PORET PISA poe yes died Complete vehicle kerb mass kg Battery capability Ah 12 oe died Engine type My ited Rated loading Mass kg 80 Nominal voltage V 24 heel base amin Rated voltage V a maximum speed Km h 20 Charger type 02 Tread mm Rated power output W 350 Front Rear suspension type Hydraulic Input voltage V 27 5 Front Rear breaker type Mechanic disc brake Delivered power W 44 Min ground clearance mm 80 Rated speed r min 2250 Front Rear braking maneuver Hand operation Start type Electric start ini j j Rated output torque N m 1 49 Minimum tuming diame tenn wes Front Rear wheel specification F 12 1 2 2 75 Transmission type chain Unladen weight kg Battery specifications 6 DZM 12 R 12 1 2 2 75 Complete vehicle kerb mass kg 23 7 Battery capability Ah 12 Front Rear tire pressure 220kpa Headlamp specification Rated loading Mass kg 80 Nominal voltage V 24 Front Rear rim type Alloy Rim LWA d B A 60 Final reduction ratio 3 91 Vibration m s2 0 4 lt 0 5kg 1 0 Ibs
4. Original instructions Please read this owner s manual carefully before using this product This is most important Please read this owners manual carefully It s good for drivers safety and vehicle s maintenance If the rider is without safety awareness or driving experiences please do drive under the adult s supervision This is most important It s very important for your safety This product is recommended for riders of 16 years old or over Do not lend the vehicle to others who don t know how to operate Please observe the local LWA and regulations Content Safety warning Compliance with the LWA Assembling The position of the VIN Key switch Function switch Charger Emergency turn off stop switch Burglar Alarm Tire and Tire pressure gauges Operating Inspection before riding Idling inspection Front rear suspension inspection Front brake system inspection Rear brake system inspection Battery inspection Tool bag inspection Self Protection inspection Starting Training Riding Parking Cleaning Storage Transport Delivery Maintenance amp accessories Accessory description data circuit diagram age warning and warning labels OWNERS MANUAL Manufacturer Zhejiang Kingroma Industrial amp Trading CO LTD Address NO 1 Baihe Road Baihuashan Industrial Area Wuyi Zhejiang China Please note that this is a general manual So the style of the 2 wheelers that you
5. arts parameter Electrical diagram age warning and other warning labels and plates DAG READ THE INSTRUCTION MANUAL BEFORE RIDING RECOMMENDED FOR YOUNGSTERS OF 16 YEARS AND OVER OFF ROAD USE ONLY NOT APT FOR USAGE ON PUBLIC ROADS HIGHWAY S WALK WAYS ALWAYS WEAR PROTECTION SUIT WHEN RIDING OPERATOR ONLY NO PASSENGERS THE ADD ON OF A PASSENGER WILL ADVERSELY AFFACT THE ABILITY OF THE OPERATOR TO CONTROL THE VEHICLE OPERATOR SHOULD CONTROL SPEED SHOULD NOT RIDE TOO FAST DO NOT OPERATE THIS VEHICLE AFTER CONSUMING ALCO HOL OR DRAGS ZA WARNING please fully charge the battery before use CIRCUIT DIAGRAM lectric door lock controller gt hall steering is AS E B S En 7 N 2 3 8 aa A aa g JS E ty E gt 2 e black i Hall twist CE plate Product Name DIRT BIKE Rear brake 52 a Voltamete Warning plate Product type KXD708E L W H mm 1320x620x800 Engine type MY1018 2E Wheel base mm 930 Rated voltage V 24 Maximum speed Km h 20 Charger type 02 Front Rear suspension type Spring Input voltage V 27 5 50 Tread mm Rated power output W 500 Front Rear breaker type Disc brake Delivered power W 44 Min ground clearance mm 180 Rated speed r min 2200 Front Rear braking maneuver By hand Start type Electric start Minimum turning diamet
6. e the brake to make it slow down 5 Make sure both the front brake and the rear brake work at the same time when braking Never force too hard that will reduce the working life of the brakes 6 Do not make dangerous movement while driving to ensure safety Parking 1 Turn back the throttle and brake at the same time 2 Turn the key to OFF position when the vehicle stops then take out the key 3 Parking function is recommended at this moment to avoid sliding Cleaning After every riding the driver should clean the vehicle Then place it on flat ground to clean and then check 1 High pressure air or water will harm the vehicle 2 Do not splash water on these parts key switch cables and battery 3 Generally to wash the vehicle with clean water 4 Do not turn on the key switch immediately after cleaning 5 Chain should be daubed with lubricating grease Storage The quality will be influenced if you do no use vehicle for a long time Before storage vehicle must be checked to ensure it is in a good condition 4 Check the weight of vehicle from the parameter list 5 Clean up the vehicle and then wax its surface 3 Turn off the key switch 4 Clean the chain and then lubricate it 5 Lubricate all the cable parts 6 Place the vehicle well packed in a cool ventilated place ta avoid damp and sun exposure Transport This is a process of transport the well packed vehicle 1 Check the weight of vehicle from
7. ed on if headlight available Function Switch Functional switch is in left side of handlebar which consists of horn start headlight flame out function It varies according to the type of vehicle 1 Electric horn button Po When key switch is on press it then it rings 2 Start horn button Red XP oss it to start the vehicle when brake hand is ready 3 Headlight puton AO near light distance light 4 Turn off win OSE turn on Deum on Charger optional 1 The input voltage is 220V or 110V the same as voltage in local place and output voltage is24V or 36V It is selected according to the configuration 2 When the vehicle is charging te imdicator light turns to be red When the vehicle is fully charged the indicator light turns to be green Burglar alarm optional 1 The input voltage is 24V or 36V 2 Anti theft function Press the lock key vehicle is in alarting condition 3 Keyless function Don t need to turn on the key switch Press the start button twice continuously and then operate the vehicle Emergency turn off stop switch It s put in the left side of the rear frame or on the left handlebar Pull or press down the switch the engine will be stopped The emergency rope can be fastened on the driver When there is emergency the vehicle will be stopped automatically by the driver getting off the seats and pulling down the rope Tire and Tire gauge Tire The proper tire pres
8. er mm 1800 Rated output torque N m 2 1 Front Rear wheel specification Front 90 65 6 5 Transmission type Chain drive Unladen weight kg 33 Battery specifications 6 DZM 12 Rear 110 50 6 5 Battery capability Ah 12 Front Rear tire pressure 165kpa Headlamp specification Nominal voltage V 24 Front Rear rim type Alloy rim LWA d B A 60 Charger type 02 Final reduction ratio 6 18 Vibration m s2 0 4 Spring Input voltage V 27 5 Disc brake Delivered power W 44 Front Rear wheel specification 2 50 10 Transmission type Chain drive Front Rear tire pressure 248kpa Headlamp specification Front Rear rim type Alloy rim LWA d B A Final reduction ratio 2 7 Vibration m s2 0 4 Gn pe Cima Warning plate y X _ A 4 y Battery Front brake Chain cover ie ai Wheel base mm Rated voitaye V 24 n a as i S LA s Ay F a4 a e CE plate A FA E A E n D y Chain adjuster A n t O iii m s kbe w Product Name DIRT BIKE Product type KXD504E A PO L W H mm 1100x570x730 Engine type MY1020 Tread mm Rated power output W 390 l Min ground clearance mm 140 Rated speed r min 2250 Functional switch Functional switch po out 7300 Rated oltpultoraue A 146 Minimum turning diameter mm p que N m Unladen weight kg Battery specifications 6 DZ
9. es of block 6 Do not open the brake casually as the brake fluid will damage people s skin Clean the skin with water of go to the doctor when it happens 7 The rear brake lever is with parking feature as well Use it when parking Battery check The battery of this vehicle is maintenance free 1 Check whether battery joint is tight If there is some part broken please change it 2 Do not throw off the battery which resulting in environment pollution 3 Do not charge the battery until it is out of power 4 If it does not use for a long time check the electricity every three weeks Please charge upon the single battery voltage is lower than 12 V 5 When charging using or placing the battery do not put it upside down Tool bag inspection Check whether tool bag is taken every time before riding The tool bag is equipped with some professional tools You can use time when in need Self protection inspection Self protection inspection is the guarantee of pleased driving and life safety Please wear the protective clothing correctly to ensure your safety Protective clothing consists of these parts below wie VE a ay Every check and inspection step above is necessary there is danger existing when driving Please conform the above process before driving and operate in accordance with the standard strictly when driving will protect your and life safety The warning sticker put on the surface of vehic
10. le includes important safety information ser must comprehend fully and act strictly It will cause the extreme injure and even death if not carefullchecking or executing Starting Following the steps below to start the engine 1 Park the vehicle on the flat ground 2 Turn on the key switch to NO position Make Sure it s well connected 3 At the beginning turn the throttle slowly Training Unprofessional person may not understand the large informatien of this part So Training will not explain in details Advice Learn from local professional institution or the retailer Operating and driving way in the first or second weeks may affect the vehicle future performance Please pay more attention During this period do not turn the throttle into maximum should alter the speed often After training period maintain the vehicle according to maintenance form strictly Keep the vehicle in good condition Training is necessary Improper operation will result in the vehicle and result in serious injuries and death If the driver is without the safety awareness or driving experiences please drive it under the supervision of the adults Riding Before driving please review the safety driving way and its importance 1 Pay attention to the brakes working condition always 2 Driving with only one hand is dangerous and forbidden 3 Turn the throttle slowly Never turn it suddenly 4 Release the throttle and us
11. sure can provide the maximum stability and comfortableness Do check and adjust the tire pressure regularly to make sure the pressure to be on the standard grade To find the tire size and standard pressure please check parameter list and warning label on the vehicle To find the Load bearing and speed grade please check the tire surface 1 Check tire pressure and condition before driving Please make the replacement if there is any following condition happened broken stabbing or rim is out of shape Please seek assistance from qualified technician or local retailer for replacement 2 Improper tire pressure will result in hazards Over the standard pressure can cause a flat tire Lower than the standard pressure can cause tire relaxation or even dropping and resulting in losing control of the vehicle 3 When the tire tread wearing is over 2mm please replace new tire in time Please seek assistance from qualified technician or local retailer for replacement Tire gauge optional Manufacturer will provide to customers to measure tie pressure Tire gauge is put on the key ring of the key switch for users convenience Measure method Unscrew valve cap then press it toward the valve cap with tire gauge The measured value is tie pressure Put back the valve cap and screw it after measuring Operating Inspection before riding Idling inspection 1 Stabilize the vehicle each mechanical parts to make sure it move normally
12. tall handlebar adjust to proper angles and tighten nuts with force between 15N m 25N m ge step Connect battery cables When you connect battery cables electric lock is in the sate of OFF Positive first then negative Disassembly is opposite If you fail to understand the instruction please contact with the local retailers and get professional confirmation after installation Loading Adjustment This step should be checked regularly to ensure safety and convenience Make sure the connection is ON and no part is OFF So vehicle can be started at anytime Adjust the Chain Use the index finger to press lightly the middle position between power output sprocket and rear sprocket The best condition should be pressed 15mm to 20mm If it is not in this range please adjust the chain adjuster Please rmote The chain adjuster should be adjusted at the same time to ensure the balance of both side To loosen the fz sten nuts of chain adjuster first and then unscrew or screw nuts to be best condition Finally make the nuts ofchain adjuster screwed The position of the VIN The VIN is on the right side of the front frame as Key switch Key switch is on the right side of the vehicle front part indicating OFF and NO OFF condition Key can be taken out Light can not be turned on if light available engine can not be started ON condition Key can not be taken out When engine is being started headlight can be turn
13. the parameter list 2 Ensure the package well protects the vehicle 3 Ensure the vehicle is well fixed on the trailer or forklift 4 Handling with care Delivery This is the process of delivery the well packed vehicle 1 Check the weight of vehicle from the parameter list 2 Ensure the vehicle is placed normally Do not turn it upside down or side lay it 3 Ensure the vehicle is well fixed on the trailer or forklift 4 Handling with care Maintenance Unprofessional person may not understand the large information of this part So Training will not explain in details For more details please contact local retailer Necessary maintenance is the important guarantee to keep the vehicle in good condition Please maintain the vehicle according to time list Engine maintenance After every driving please close the switch of carburetor and oil way Release the rest oil This is very important If not do it accordingly the vehicle will not be easily started after it has been placed for a long time or carburetor will leak Maintenance time list Please do operate strictly according to maintenance list I Inspection Maintenance or lubricant replacement C Cleaning L Add lubricant First week 30days after driving Each year Controller Throttle Hall twist CCA O Brake caliper Brake system Bolts and button Tire l Turning system Suspension system Battery Y The position of spare p
14. ty 18 It is necessary to receive training from importey or retailer and learn the operation skills 19 Learn local LWAs and regulations of off road two wheelvehicle driving from the retailers 20 It s easy to be burned by break after using the vehicle fora long time 21 Although the vehicle is with safety designed measures harms still can not be avoided O ON OOo FWD gt Please read the warning labels on the vehicle carefully and understand them fully 1 Warning caution label includes important safety information 2 User must understand the content of labels completely and carry out 3 Make sure all the labels are put on the vehicles already 4 When finding the labels are not clear or fall off please ask dealers for them to stick on the vehicles to ensure the integrity of all the labels Compliance with the laws and directives 2006 42 EC MACHINERY DIRECTIVE 2004 108 EC EMC DIRECTIVE 97 68 EC ENGINE POLLUTANT DIRECTIVE Assembling guide 1 Place packing box on the flat ground then open it with the scissors or cutter 2 Use 10 open end wrench and 6 allen wrench to apart the packing metal for iron cage packed models this step is not applicable 1 step Please install rear shock absorbers and tighten nuts on both sides with 25N m force 2 step Please install the front tires make the tread pattern and cycle valve outside and tighten nuts with force between 35N m 45N m gr step Please ins
Download Pdf Manuals
Related Search