Salvo Chock User Guide Castell
Contents
1. Salvo Chock GTP User Guide Castell Salvo Chock is a device designed to immobilise nonarticulated goods vehicles whilst they are being loaded and unloaded When used in conjunction with other Salvo products it can prevent inadvertent or unauthorised drive aways It is designed to be deployed on the drivers side front wheel of the vehicle Salvo Chock introduces discipline into the chocking procedure by interlocking the chock and the loading bay lf the chock is not correctly fitted the bay door cannot be opened Like all of the existing products in the Salvo range Salvo Chock relies on Castell s time proven trapped key technology salvo Chock Before Use G When the chock is received it will 2 The Lock Support Arm must be 3 To complete the assembly the cover be configured for transit To make raised to the vertical position and should be fitted with the fixings the Chock ready for use the Lock the Securing Plates A fitted to provided in 6 positions The Chock Support Arm must be secured in prevent any movement of the arm is then ready for use the operational position The Retention Sleeve B should be slid into position around the joint in the spigot Operation The Salvo Chock is designed as a part of a safety system to prevent accidental drive aways The Salvo Chock ensures the vehicle is locked in position betore the loading bay door can be opened Salvo Chock assembly is fitted Press the pedal until the tw2. o chocks 3 Remove the untrapped key The loosely around drivers side front contact the tyre Continue until lock chock is now secured in place wheel Rotate the catch anti springs into place clockwise to the up position as shown Precautions Salvo Chock is designed to fit any size or type of rigid vehicle from 3 to 26 tonnes with tyre outside diameter from 27 5 to 42 inches 700 to 1070 mm To prevent the risk of manual handling injury only move the chock around using the mobility handle see photos under Operating Instructions Handle with Care Beware of pinch points where the two halves slide telescope together 12 of 51 U Salvo 2013 E Issue 1 Salvo Chock GTP User Guide Castell Maintenance Periodic visual checks should be carried out by the site manager safety officer Do not lubricate lock barrel with oil or grease use CK Dry Powder Graphite if necessary The recommended grease to lubricate sliding parts is Armna G4789 or equivalent Technical Data Data Material Powder coated carbon steel and aluminium Weight Colour Safety yellow graphite grey Co Dimensions in mm SALVO CHOCK 1041 Na p AR i Order Information Information Please advise part number and symbol when ordering mandatory information Part Number Symbol 007058 13 of 51 U Salvo 2013 E Issue 1
Download Pdf Manuals
Related Search