XiIIIPlus/R110XI/R170Xi User Guide
Contents
1. Troubleshooting 135 Printer Diagnostics Printer Diagnostics Self tests and other diagnostics provide specific information about the condition of the printer The self tests produce sample printouts and provide specific information that helps determine the operating conditions for the printer The most commonly used are the Power On and the CANCEL self tests Important Use full width media when performing self tests If your media is not wide enough the test labels may print on the platen roller To prevent this from happening check the print width using Set Print Width on page 60 and ensure that the width is correct for the media that you are using Each self test is enabled by pressing a specific control panel key or combination of keys while turning the power On I Keep the key s pressed until the first indicator light turns off The selected self test automatically starts at the end of the Power On Self Test Note e When performing these self tests do not send data to the printer from the host e If your media is shorter than the label to be printed the test label continues on the next label e When canceling a self test prior to its actual completion always reset the printer by turning the printer power Off O and then On I e If printer is in applicator mode and the liner is being taken up by the applicator the operator must manually remove the labels as they become available Power On Self Test A Power On Sel2. f Test POST is performed each time the printer is turned On I During this test the control panel lights LEDs turn on and off to ensure proper operation At the end of this self test only the POWER LED remains lit When the Power On Self Test is complete the media is advanced to the proper position To initiate the Power On Self Test complete these steps 1 Turn On I the printer using the power switch located to the side of the control panel The POWER LED illuminates The other control panel LEDs and the LCD monitor the progress and indicate the results of the individual tests All messages during the POST display in English however if the test fails the resulting messages cycle through the international languages as well 12 2 05 XillPlus R110Xi R170Xi User Guide 13383L 002 Rev A
Download Pdf Manuals
Related Search