Home

Computing Server User Guide - Cellular Imaging & Analysis

1. supported RAM 128 MB minimum Free hard disk space 100 MB for installation Network The Imaging Computing Server uses TCP IP to communicate between the server and the client the client computers must be able to contact the server using TCP IP The node running the Control service must have a static IP address By default the server uses TCP port 15003 although this can be changed in the server application If this port is blocked by a firewall on the computer on which any software component of the ICS is installed there will be problems connecting clients to the ICS and or administrating the ICS Windows Firewall is enabled by default on many systems and the ICS service creates an exception July 2004 7 in this firewall when it runs For all other firewalls consult the documentation or your network administrator The ICS will generate high volumes of network traffic as data is send between clients and nodes for best performance the clients and nodes must be on a single high speed network e g a switched 1000baseT Ethernet network Client Machines Mac OS X and Windows clients can be served by the ICS The system requirements for a client computer depend on the type of application that that computer will run Ifthe client machines are to share processing with the ICS nodes then they should be of a similar specification to avoid becoming a bottleneck in the processing See Technical note 263 System Requirements for
2. Externsdite Auten fe 4 PLEXnet Licensing E Function Discover 2 Function Discover Gy Group Palicy Client u Health Key and Ce 4 HomeGroup Liste u HomeGroup Brea gt Human Interface ICS Control Service CLICS Node Service LIKE and AcAhlP Ps A Interactive Servier Ce Internet Connecti AP Helper C Prec Policy Agent A Kamm for Distrib Description Prodes the core file encryption techn The Exterrsible Authentication Protocol Enables you to send and receive faves This service performs licensing functio The FOPHOST service hosts the Functio Publishes this computer and resources The terce n retpontible for applying t Prowdes 4 509 certdicate and key mane Mates local computer changes associat Pericems networking tasks associated Enables genetic input access to Human Manages nades on an Improwisson Co Node un an Improvisiom Computing Ze The IKEEXT eeevece hosts the Internet Ke Enables user notification of user input t Provides network address transition a Provides tunnel connectivity using W Internet Protocol secunty IPsec suppa Coordinates transactions between the Creates a Netwock Map commuting of P Ratus SEEEP FRE SEESESSECEESS Click the relevant option to start or stop the service 32 PerkinElmer
3. 2 Change the TCP IP Port number in the dialog 3 Click Save to activate the change All of the associated nodes are updated to the new TCP IP port 4 After changing the TCP IP port of the ICS please advise all users of the server that they will need to enter an alternative port number in the Computing Server preference Data transfer is by default directly between the clients and nodes for speed if however this form of communication is not reliable force all data to go via the ICS Control This will substantially increase the network overhead 24 PerkinElmer USING THE IMAGING COMPUTER SERVER Using the Imaging Computer Server Volocity clients must be configured to use the ICS to accelerate eligible processes 1 Start Volocity Select Preferences from the Edit menu Windows or the Volocity menu Mac OS In the Preferences dialog select Servers 2 Click the plus sign to configure a new server connection July 2004 25 Type Imaging Computing Senser Additis Pam 100 Tau iid olin Ierwe addres and port number teen pour nee ringe der AD Password Save Password Change buszezug C Opaions C Cancel oe 3 Set the Type to Imaging Computing Server Enter the address and port details for the computer running the Control Service Enter a User ID and Password for the ICS at this address 4 Click the Options button to configure the use of the ICS by this Volo
4. Configure and manage the ICS Windows only July 2004 5 6 The ICS Control Service Node service and Administration tool software components are available in a single unified ICS installer System Administrator It is recommended that one person manages the Computing Server and takes responsibility for configuring the system This person is referred to as the system administrator in this guide System Requirements The computer hardware market changes rapidly and as a result information about recommended system requirements also changes Please refer to the Technical Note 440 published on the Support area of the web site http www cellularimaging com for the most up to date specifications Nodes A node is a single machine but it may contain multiple processors which in turn may contain multiple cores Processor 2 two x Quad Core Intel Xeon E5420 2 5GHz e g Dell PowerEdge 1950 III Operating System Windows XP Professional x64 Edition Windows 7 Professional x64 Edition RAM 8 GB USB port One free USB port for installation of dongle on the machine that will run the ICS control software Free hard disk 20 GB minimum 40 GB preferred space The ICS nodes must be set to never sleep and should not be switched off ICS nodes must have adequate page file to carry out processing We recommend setting a custom size where the initial and maximum page file is 20000 MB Ins
5. File menu WORKING WITH THE IMAGING COMPUTING SERVER Unlocking additional licenses When you purchase licenses for additional nodes from PerkinElmer you will receive an unlock code which when entered in the appropriate location on the server application will enable an increased number of nodes to connect to the control 1 Select Unlock Code from the Configure menu Unlock Code Cancel 2 Enter the code provided exactly as it appears in the communication sent from PerkinElmer and click OK 3 In the Computing Server Session log you will be able to see the increased number of node licenses 4 Install the node software on the new computers and they will be added to the ICS July 2004 23 Setup Network The default TCP IP port used by the ICS is 15003 It is possible that there may be a conflict on this port on the server machine This will be apparent to the network support personnel for your institution or building and they may ask you to change the port used by the ICS to solve the conflict They may suggest an alternative port number to use 1 Select Setup Network from the Configure menu Setup Network Control Clients nodes and administrators can connect to the ICS Control using this TCP IP port soos S Data Transfer Transfer data directly between cients and nodes using this TCP IP port fastest O Transfer data between dients and nodes using the ICS Control as a relay slowest EE
6. Volocity on the website http www cellularimaging com support 8 PerkinElmer INSTALLING THE IMAGING COMPUTING SERVER Installing the Imaging Computing Server 1 Administrative privileges are required to install software Choose a computer to be the ICS control Double click the installer icon and follow the instructions on screen to install the Control Node and Administration software Note the IP address of this computer Plug the dongle into a free USB port on this machine after running the installer ie Imaging Computing Server Setup Type Choose whether you want to install the control one control is required per ICS network a node or the administration tool then Click Next Install the ICS Control The administration tool will also be installed Install the ICS Control and an ICS Node so that the same computer is used for both The administration tool will also be installed O Install an ICS Node O Install the ICS Administration tool only 2 _ Install the ICS Node service on each of the node machines During the installation process you will be asked to enter the IP address of the Node that is running the ICS Control service Enter the IP address of the computer from step 1 The ICS will not work if it is prevented from sending information by a firewall Windows Firewall is enabled by default on most systems and the ICS services will create an exception in the firewall when they run For all other firewal
7. aN Gee Gait ae 27 FIREWALLS AND VIRUS PROTECTION 29 July 2004 3 4 PerkinElmer Firewalls fe A ee ee een ee deene 29 Virus Protectiei srine nenne 29 TROUBLESHOOTING ee 31 Windows dongle related errors eenen er enneerenenneevensneenenneeeenn 31 Starting and Stopping ICS Services nun anne neer enneerense neer enneeeenenneerenven 31 IMAGING COMPUTING SERVER Imaging Computing Server What is the Imaging Computing Server The Imaging Computing Server ICS is a software utility that distributes parts of a task between multiple similar processing units to accelerate processor intensive operations The ICS currently accelerates the following Volocity tasks m Restoration Iterative and Fast m Ray tracing m Noise removal m 4D measurements excluding tracking A complete ICS system will consist of several software components Hardware requirements for each component are given below in the System Requirements section Software Components Control Service Receives jobs from the Client distributes jobs to the nodes manages feedback to the Client Windows only service no graphical user interface Node Service Client Carries out processing consists of Volocity modules required to carry out ICS accelerated processes Windows only service no graphical user interface Volocity running on Windows or Mac OS X Multiple clients may share the same ICS Administration
8. performance view the relevant window Show Jobs Show Users and Show Nodes are listed under the Window menu Reports The log of information for reporting is continuous it will be retained even if you quit and restart the ICS 1 Select New Report from the File menu 2 Select the time frame of the report by setting From and To dates New Report Report Type All Usage vl En 18 04 2008 sl to 18 04 2008 v 3 Selecta Report Type All Usage v Usage by user Usage by group Connection history Users in each group Groups for each user m Choose Usage by user or Usage by group to view ICS usage according to user ID or group For each user or group the number of sessions and hours of CPU usage will be shown Use this report to obtain information for billing individuals or groups for their time on the imaging system m The Connection history report provides detailed analysis for example who was using the server at 3 15 on Monday 1 It will also show how much CPU time was used at each connection July 2004 21 22 PerkinElmer m The reports Users in each group and Groups for each user may be used as a record of the configuration of the system for reference Click OK to generate a preview of the report Once the report has been previewed it may be saved as a text file to export for further analysis or presentation or it may be printed from the ICS application Select the appropriate option from the
9. Imaging Computing Server User Guide Imaging Computing Server PerkinElmer Viscount Centre Il University of Warwick Science Park Millburn Hill Road Coventry CV4 7HS T 44 0 24 7669 2229 F 44 0 24 7669 0091 E cellularimaging perkinelmer com I http www cellularimaging com Printing History Document Software Date About this edition Edition Version 1 0 1 0 April The first edition of the Imaging Computing 2008 Server User Guide 2 0 1 0 July 2009 Updated to describe changes in Volocity to setup of an ICS in Volocity 3 0 1 1 January Updated to describe use of ICS on 2011 Windows 7 Operating Systems PerkinElmer believes the information in this manual to be correct at the date of issue However it is subject to change at any time and does not represent a commitment on the part of PerkinElmer PerkinElmer shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this manual PerkinElmer has a policy of continual development and reserves the right to change information within this manual without notice to reflect changes in the system s design and specification Copyright 2001 2011 PerkinElmer Inc All Rights Reserved Registered names trademarks etc used in this file even when not specifically marked as such are protected by law PerkinElmer is a registered trademark of PerkinElmer
10. Inc Volocity Openlab Imaging License Server and Imaging Computing Server are trademarks of PerkinElmer Inc Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries Apple Mac OS and QuickTime are trademarks of Apple Inc registered in the U S and other countries CONTENTS Contents IMAGING COMPUTING SERVER 5 What is the Imaging Computing Server nennen nennen 5 system Requirements cH 20 2 EENS ANEREN 6 INSTALLING THE IMAGING COMPUTING SERVER 9 Important backup information nanne nnee en ennene neren enenneneeerenn eneen nennen 13 Installing client machines nnnne nnen neneee neen enenneneen eeen enannenrenenenenennenennens 13 CONFIGURING THE IMAGING COMPUTING SERVER 15 Overview kn etna ede tedere EE andel 15 Create USers tnt ni ergeren denten hade edelen genere pened 15 Authentication against a domaine 17 Greate groups uarnaki neven Enge REN HERREN EEE 17 Editing Computing Server Configurations nnn annen enen neneen eeen enennenenenn 18 WORKING WITH THE IMAGING COMPUTING SERVER 19 Computing Server TEE 19 Computing Server Session Log 20 Jobs Users and Nodee nnen earn Hin 21 EE 21 Unlocking additional licenses nanne en ennenene nennen ene nereenenenneneeeenen en 23 Setup Network u en nol elie Griend 24 USING THE IMAGING COMPUTER SERVER 25 Upgr ding theilCS ensen Bee ea Ea
11. Remove Noise 1 job is 1 timepoint or channel e g a 10 timepoint series with 2 channels would result in 20 jobs Measurements 1 job is 1 timepoint Ray Tracing 1 job is 1 tile in the raytraced image Upgrading the ICS PerkinElmer has a policy of regular updates to all products Upgraded versions of the ICS will affect the ICS Control and Node services and the ICS Administration tool It will therefore be necessary to install upgrades on all the machines involved Upgrading the Imaging Computing Server is simple Download the ICS installer Run the installer on each of the nodes updating the Node and Control services as appropriate m Run the ICS installer on each machine where the Administration client is installed to update the client All the information relating to users groups and configurations is stored on the server so there is no need to modify the client installations in any way July 2004 27 Note It is important that the latest version of the ICS and Volocity is used on all client and node computers New versions of the ICS may not be compatible with old versions of Volocity and vice versa 28 PerkinElmer FIREWALLS AND VIRUS PROTECTION Firewalls and Virus Protection Firewalls In order for the ICS Administration application to communicate with the Control application and for data to be transmitted between the client and the nodes it must be possible for these applications to cross any firewall on th
12. When starting the Imaging Computing Server You may see the following error message when trying to start the ICS The command could not be completed because the dongle was not found 2600 To correct this problem 1 Right click on the My Computer icon and select Properties 2 Click Device Manager and look for an icon with a yellow exclamation mark next to it called Unknown USB Device or similar 3 Click this icon click Remove and then click Refresh Windows should then redetect the dongle and install the correct driver Installing subsequent versions of the ICS does not require removal of the dongle Starting and Stopping ICS Services If for any reason the ICS node and or ICS control services do not start automatically the services will have to be started manually Indications that ICS node or control services are not running include Computing Server Status shows fewer nodes than expected are running Control service can t be started from the ICS Administration tool July 2004 31 m Volocity returns the error message The command could not be completed because the Computing Server has no nodes To manually start or stop ICS services go to the Services Control Panel This may be listed under System and Security gt Administrative Tools If they have been installed the ICS Control Service and ICS Node Service will be listed file Action View Help E 5 Bm ran p Name 4 Encrypting File Sy O
13. city client kraging Computing Server Options Use ra Imaging Computing Server Else veer Imaging Computing Server and his Computer CO Process all operallons om this comeaner m Use the Imaging Computing Server all jobs will be sent to the ICS m Use the Imaging Computing Server and this computer to allow your computer to work on your jobs alongside the ICS Select this option only if your computer is of comparable or higher specification to the node computers A lower specification computer will create a bottleneck in the processing and may slow the overall process down A comparable computer will increase the speed of processing If there are jobs queued on the ICS ahead of yours progress will still be made on the local computer This computer will only be used as a node for processes started on this computer 26 PerkinElmer USING THE IMAGING COMPUTER SERVER m Process all operations on this computer the ICS will not be used Every process that can be accelerated by the ICS will require the data to be broken down into jobs The way the data is broken down i e the definition of a job varies depending on the supported operation Iterative Restoration 1 job is 1 image 1 channel 1 timepoint Or 1 job is 1 block if Break image into blocks is enabled in the restoration dialog Block size is calculated using RAM processor determined using total amount of RAM in all nodes divided by total number of processors in all nodes
14. e domain to make use of this feature To configure ICS user accounts for authentication against a domain give each user the same ICS username as their domain username and choose Use user s password on the domain to authenticate Create groups Groups help organize users for reporting purposes 1 Select Groups from the Configure menu Administrators There will already be a group called Administrators present This allows administration of an ICS using the Computing Server Administration Tool for Windows Any additional users who are required to be administrators of the ICS in this way should be added to the Administrators group July 2004 17 2 Click Add Add Group Available users Users in group Administrator 3 Enter a Group name and a brief Description of that group For example this could be the name of a lab or a project team 4 From the list of Available users select all users who are to be a member of this group and click Add to add them to Users in group 5 Click Save to save the changes Editing Computing Server Configurations You can now add new users and groups at any time You can edit existing users and groups by selecting the required item in the relevant window and clicking the Edit button 18 PerkinElmer WORKING WITH THE IMAGING COMPUTING SERVER Working with the Imaging Computing Server Computing Server Status If the Computing Server Status windo
15. e in User ID and set up a Password if required July 2004 15 Add User User ID Use computing server password to authenticate Password Confirm Password Force the user to change their password the next time they log in O Use user s password on domain to authenticate Description C Account will expire on the following date Available groups Administrators To make it easier to remember user IDs we recommend a naming convention such as first initial surname 4 At this stage we have not created any groups so the Available groups field may be left blank We will collect users into groups at a later point in the configuration process However once groups have been created new users can be made members of a pre existing group in this dialog at the same time as the User ID is created 5 Click Save The new user now appears in a list in the Users window 6 Continue to add users until the required number have been added Either click Add or use Duplicate to create a new user based on an existing one Note You may like to create a guest account by configuring a user called Guest Do not set a password for this user 16 PerkinElmer CONFIGURING THE IMAGING COMPUTING SERVER Authentication against adomain It is possible for users to authenticate against aWindows domain The computer on which the ICS Control software is installed must be integrated in th
16. e system An exception in Windows Firewall for Windows XP and Windows 7 is made automatically when the ICS services start For all other firewall implementations you will need to ask your network administration for assistance Virus Protection Real time anti virus scanning on client and node computers will severely impair performance Real time scanning must be disabled for Volocity and ICS applications The ideal solution is to disable real time protection or scanning for the ICS If this is not possible disable real time protection for Volocity data files since these are the file types that the ICS will be processing Volocity file types are m mvd2 m aisf m aiix m atsf m dat Only if neither of the first two options is possible should real time protection by the anti virus software be disabled This will disable real time protection for the whole computer Consult the documentation for your anti virus software for specific instructions on disabling real time anti virus protection July 2004 29 30 PerkinElmer TROUBLESHOOTING Troubleshooting Windows dongle related errors The ICS is dongle protected The USB dongle requires a driver to operate and this driver is installed by the ICS installer IMPORTANT You must not plug the dongle in until after the Computing Server has been installed for the first time If you plug the dongle in before the installation program finishes it will not be detected by Windows
17. he start menu it can also be used to start and stop the ICS ICS Administration SR Edit Configure Window Help es Disconnect Stop Server Reset Job Statistics New Report Exit Remote Administration of the ICS It may be more convenient to administer the Computing Server from a machine that is not one of the nodes for example your desktop machine If you wish to administer the Computing Server from another Windows machine install only the ICS Administration tool You will be asked to enter again the IP address of machine that is running the ICS Control service ICS Administration Would you like to Connect to the local server L Connect to a remote server Don t show this hint again Choose the option to Connect to a remote server You will need to enter the IP address of the machine running the ICS Control service 12 PerkinElmer INSTALLING THE IMAGING COMPUTING SERVER Important backup information The ICS stores the users and groups plus usage logs for report generation in a database This must be considered in the backup strategy for the system The files are located as follows Windows XP C Documents and Settings All Users Application Data Imaging Computing Server Windows 7 C Program Data Imaging Computing Server This folder is hidden by default show hidden files folders and volumes to reveal it Installing client machines 1 Ifyou have received a Volocity CD insert this i
18. ls the exception will have to be created See the section Firewalls and Virus Protection starting on page 29 July 2004 9 10 PerkinElmer 3 4 5 To start the Computing Server Administration tool and begin configuring the ICS find the application in the Start menu Start gt Programs gt Imaging Computing Server gt ICS Administration If the ICS Control service is already running the following dialog will be shown ICS Administration Would you like to Connect to the local server L Connect to a remote server Dont show this hint again Choose the option to Connect to the local server If the ICS Control Service is not already running it can be started from the Computing Server Administration Tool If running Windows 7 you will need to start the ICS Administration application with administrator privileges Right click on the ICS Administration item in the Start menu and select Run as Administrator At the prompt select Start an ICS Control on this computer which is the server running on the machine currently being used ICS Administration Would you like to 3 Start an ICS Control on this computer L Connect to a remote server Close If this hint is not displayed choose Start Server from the File menu The server will then require a user ID and password to allow access INSTALLING THE IMAGING COMPUTING SERVER Local Server Connect to the local server as User ID Administ
19. nto the drive of a client machine You may also download the relevant installer for the product from the website http www cellularimaging com downloads 2 Double click the installer icon and follow the instructions on screen It may be necessary to perform additional installations of hardware drivers for devices to be controlled by the software Without these drivers additional hardware will not work 3 Repeat this process for each of the applications and each of the client machines The ICS must be configured for users and groups before client machines may log on See Configuring the Imaging Computing Server on page 15 for details July 2004 13 14 PerkinElmer CONFIGURING THE IMAGING COMPUTING SERVER Configuring the Imaging Computing Server Overview Once the Computing Server is installed users and groups must be created before any clients can log on Users and groups can also affect what can be extracted from reports produced by the ICS ICS administrators are advised to read the section on Reports on page 21 before deciding on their users and groups Create users Only registered users may log on to the ICS Everyone who is to be allowed to log on must be given a user ID Passwords are optional 1 Select Users from the Configure menu There is already a user called Administrator defined This is to allow administration of an ICS Administrator Close 2 Click Add Enter the user nam
20. rator Password C Save Password The User ID administrator with no Password should be used at this point This is a default user setup on the ICS to allow initial access before it is configured You will be asked to set a new password to prevent unauthorised access to the server The user Administrator is a member of a pre existing group called Administrators Any additional user who is to be given ICS administration privileges must be added to this group Neither the Administrator user ID nor the Administrators group may be deleted The ICS Administration will start showing the Computing Server Status Computing Server Status window Computing Server Status Serial Number 12345678 Address IMPROVISION2383 165 88 173 84 15003 Data transfer method Client connects directly to node fastest Node data port 15004 Number of nodes 1 Number of connected users 0 Average job network transfer time 0 Current node CPU usage 0 User Administrator from IMPROVISION2383 165 88 173 84 using ICS Administration July 2004 11 The address shown in the Computing Server Status window is the IP address of the machine running the ICS Control service Once logged on to the server via the Computing Server Administration tool configure the ICS as described in Configuring the Imaging Computing Server on page 15 When the ICS Administration tool has been run as an administrator from t
21. rol 1 0 0 Build 425 for Windows started at 15 26 on Friday 18 April 2008 15 26 06 088 This version of ICS Control was built at 23 08 on Thursday 17 April 2008 15 26 06 088 Core Version 5 0 0 Build 33 Ze amp amp 15 26 06 088 Computer IMPROVISION2383 15 26 06 101 User SYSTEM ICS Control will have administrator privileges 15 26 06 101 OS Microsoft Windows XP Professional Service Pack 2 This version of ICS Control was built for Microsoft Windows Intel x86 A i A 15 26 08 152 Number of CPUs 2 1 cores CPU Model Intel Pentium 4 3 00GHz CPU Features HT SSE SSE2 SSE3 15 26 08 153 RAM Size 512 0 MB Virtual Address Space Size 2 0 GB Max Pagefile Size 725 2MB Free space on drive C 5 9 GB Path of temporary folder C WINDOWS TEMP Ze Ze 15 26 06 087 SerialNo 12345678 15 26 08 167 The Software Maintenance Agreement for this product will expire on Thursday 16 April 2009 15 26 08 187 Available Node Licenses 2 Ze x a 15 26 08 195 Starting TCP IP server at 165 88 173 84 on port 15003 15 26 08 196 Started TCP IP server v 15 26 12 089 Node ver 1 0 0 Build 425 connected from IMPROVISION2383 165 88 173 84 with 2 1 cores Intel Pentium 4 3 00GHz CPUs 512 0 MB RAM Microsoft Windows XP Professional x 20 PerkinElmer WORKING WITH THE IMAGING COMPUTING SERVER Jobs Users and Nodes For greater detail about the jobs that are running users that are logged on and individual node
22. tallation of the ICS can only be performed using an account on the computer with administrator privileges Users of the Computing Server Administration tool require a Computing Server administrator account to be set up on the Computing Server Users of Volocity do not require administrator privileges to connect to the Computing Server PerkinElmer IMAGING COMPUTING SERVER The ICS is implemented using Windows services A service is a program which can run in the background even if no other user is logged in The ICS services start automatically when the machine on which they are installed is turned on Each ICS node runs an instance of the Node service Virtualization of the operating system installation is not recommended Virtualization is not recommended for performance critical applications such as the ICS Additionally some virtual environments are known to be unstable when running on multiple processors Control The Control service should be installed on one of the nodes This service distributes jobs to the other nodes Administration The administration tool is available for Windows only and can be run on any PC which meets the minimum required specification Processor Intel Pentium 3 or AMD Athlon XP Processor or better Intel Pentium Intel Pentium 2 or AMD K6 K6 2 of any speed are not supported Operating System Windows 7 Windows XP with Service Pack 2 Windows Vista Windows 2000 Windows 98 ME and NT4 are not
23. w is not visible on the screen select Show Status Window from the Window menu The header part of this window shows the serial or dongle number of the server dongle plus the IP address and port of the server machine Computing Server Status Serial Number 12345678 Address IMPROVISION2383 165 88 173 84 15003 Data transfer method Client connects directly to node fastest Node data port 15004 Number of nodes 1 Number of connected users 0 Number of running jobs 0 Total job running time 00 00 00 000 Average job network transfer time 0 Current node CPU usage 0 User Administrator from IMPROVISION2383 165 88 173 84 using ICS Administration The top portion of the window summarises the setup of the ICS The lower portion of the window will show information relating to client machines as they connect to the server including the client IP address July 2004 19 Computing Server Session Log The session log records the activity of the server application including all error messages Error messages do not appear as alerts Always check the session log if a problem with the server is suspected If you contact the Technical Support desk with a query they may ask for a copy of the session log 1 Select Show Server Session Log from the Window menu 2 Use the buttons at the top of the Session Log window to save the session log to disk or email the session log Save to dis Email 15 26 06 088 ICS Cont

Computing Server User Guide - Cellular Imaging & Analysis

Contents

Download Pdf Manuals

Related Search

Related Contents

Computing Server User Guide - Cellular Imaging &amp; Analysis

Contents

Download Pdf Manuals

Related Search

Related Contents

Computing Server User Guide - Cellular Imaging & Analysis