FiberX DisplayPort Fiber Extender Pigtail User Guide FX-P220
Contents
1. FiberX DisplayPort Fiber Extender Pigtail User Guide FX P220 Thank you for purchasing FX P220 The optical DisplayPort pigtail extender with DPCP support extends Dis playPort signals up to 300m using single strand multi mode optic fiber It supports display resolutions up to 2560x1600 WQXGA Package Contents Please make sure all of the following items are included in the package 1 FX P220 Transmitter amp Receiver 2 5V DC Power supply x 1pcs 3 User Guide If any of the above items are missing please contact your supplier for support Note Package content may differ if you have placed a special order or placed order from anywhere other than PureLink GmbH PureLink GmbH reserves the right to make changes without further notice to a product de scribed herein to improve reliability design packaging or function Installation Installation Steps 1 Connect the Transmitter module to the DisplayPort source device 2 Connect the Receiver module to the display 3 Connect a single strand multi mode SC terminated optic fiber 50 125um from the Transmitter to the Receiver module LED indicator Power jack SC type optical port 4 Connect the included 5V DC power supply into Receiver module 5 A blue indicator LED will light up after all connections are completed Note The Transmitter module does not need to be externally powered unless the source device does not supply enough power through the DV2. I connector PureLink GmbH 2015 FiberX DisplayPort Fiber Extender Pigtail User Guide FX P220 Application Trouble shooting depending on LED indicator status No display TX Solid RX Blink Check if monitor is powered on Check if DisplayPort source is selected on gt SS monitor input setting S gt A Display No display TX Blink RX Solid gt Check if the PC and display are powered on and properly booted NOTE If you are still experiencing problems It may Check if optical fiber is connected properly be neccessary to clean the module connector or SC fiber cable Around 80 of connection issues with No display TX Blink RX Blink Fiber optic systems are due to dirty connectors for 1 ch Multi mode optic fiber w SC connecter Up to 300m Please make sure that power supply is more information see the Purelink fiber cleaning connected into TX and RX guide on our website http www purelink de filead Reset the system by de plugging and min purelink media sonstige PureLink_Fiber_Clean re plugging all connection ingInstructions pdf We PureLink GmbH hereby warrant the final purchase of our product as follows In case of defect please contact the reseller from which you purchased this item One year limited warranty Customers are liable to a free of charge repair or replacemenent if goods are found to be defective with in 1 one year of the purchase date providing the u
3. nit has not been mistreated Out of warranty services A product is deemed to be out of warranty and may be liable to customer charges when it is past a year in age or if the defect is not related to manufacturing as in the following cases Product defects caused by accident disaster Damage to product caused by the customer s carelessness or mistaken application Damage to product caused by the application of parts or products not supplied or sold by our company Damage to product and any related defect caused by unwarranted service personnel or any indication that chassis covers have been removed or tampered with PureLink GmbH 2015 CEFE E 2
Download Pdf Manuals
Related Search