MegaRAID® Device Driver Installation User's Guide
Contents
1. The system BIOS must support booting from a CD ROM BIOS settings might require changes to allow CD ROM booting See your system documentation Step 2 Press lt F6 gt when the screen displays Windows NT Setup Note You must press lt F6 gt for the system to recognize the new driver when the screen changes from black to blue Step 3 Select lt S gt to specify an additional device when the screen displays Setup could not determine the type of one or more mass storage devices MegaRAID Device Driver Installation User s Guide 2 1 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Note If this screen does not display as the first user input then Step 4 Step 5 Step 6 Step 7 pressing lt F6 gt was not recognized by the setup program Reboot the system and return to step 2 Select lt Other gt The system prompts for the driver diskette Insert the MegaRAID driver diskette in the floppy drive A and press lt Enter gt Select the MegaRAID adapter from the menu by using the arrow key to highlight it then press lt Enter gt Follow the Microsoft Windows NT 4 0 installation procedure 2 2 Existing Windows NT 4 0 System Driver Installation Perform the following steps to install or update the MegaRAID Driver in an existing Windows NT installation Step 1 Click the Start button Step 2 Select Control Panel gt SCSI Adapter Step 3 Select Driver gt2. Perform the following steps to install the MegaRAID device driver in a new Windows Server 2003 system Windows Server 2003 automatically adds the driver to the registry and copies the driver to the appropriate directory Step 1 Start the Windows Server 2003 installation by booting from the Windows Server 2003 CD ROM Step 2 Press lt F6 gt when the following displays at the bottom of the screen Press F6 if you need to install Note You must press lt F6 gt for the system to recognize the new driver Step 3 Select lt S gt to specify an additional device when the screen displays Setup could not determine the type The system prompts for the manufacturer supplied hardware support disk Note If this screen does not display as the first user input then the lt F6 gt key press was not recognized by the setup program Reboot the system and return to step 2 MegaRAID Device Driver Installation User s Guide 5 1 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Step 4 Step 5 Step 6 Insert the Windows Server 2003 driver diskette and press lt Enter gt Select the appropriate Windows Server 2003 adapter from the menu by using the arrow key to highlight it and press lt Enter gt to proceed Follow the Windows Server 2003 installation procedure 5 2 Existing Windows Server 2003 System Installation 5 2 Perform the following steps to install or upgrade the Me
3. Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Boot Windows 2000 The Found New Hardware Wizard begins Click the Next button Insert the driver diskette into the A drive Click the Search for a Suitable Driver button and click Next Click the Next button In some cases a message displays saying that this driver is not digitally signed This message informs you that a nonsigned driver is being installed If this message displays click Continue Anyway Select Floppy only Click the Next button in the Driver Files Search Results window Windows 2000 Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Step 8 Click the Finish button to complete the driver installation Step 9 Repeat this process for all the adapters on your system Existing Windows 2000 System Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved 3 3 3 4 Windows 2000 Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Chapter 4 Windows XP Driver Installation This chapter describes the installation of the Windows XP driver and consists of the following sections e Section 4 1 New Windows XP System Driver Installation e Section 4 2 Existing Windows XP System Driver Installation 4 1 New Windows XP System Driver Installation Perform the following steps to instal
4. Add Remove SCSI Adapter Step 4 Click the Have Disk button Step 5 Insert the Universal Driver Suite CD which contains the MegaRAID Windows NT driver or the driver diskette that you created from the LSI Logic web site Step 6 If you are using the Universal Driver Suite CD browse the CD to find the MS Windows Driver Nt40 directory Step 7 Select the driver you want to install and click OK Step 8 When prompted restart the system for the changes to take effect 2 2 Windows NT 4 0 Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Chapter 3 Windows 2000 Driver Installation This chapter describes the installation of the Windows 2000 driver and consists of the following sections e Section 3 1 New Windows 2000 System Driver Installation e Section 3 2 Existing Windows 2000 System Driver Installation 3 1 New Windows 2000 System Driver Installation Perform the following steps to install the MegaRAID device driver in a new Windows 2000 system Windows 2000 automatically adds the driver to the registry and copies the driver to the appropriate directory Step 1 Step 2 Start the Windows 2000 installation by booting from the Windows 2000 CD ROM The system BIOS must support booting from a CD ROM BIOS settings might require changes to allow CD ROM booting See your system documentation Press lt F6 gt when the following displays at the bottom of
5. press the arrow Step 3 At the Download center select your product from the drop down menu then select Drivers and press Next Step 4 Use the page that displays to download the driver for your product to your hard drive Step 5 Run the file rwfloppy exe and follow the prompt as shown below Usage rwfloppy r w filename where r to read from floppy drive A to filename MegaRAID Device Driver Installation User s Guide 11 1 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved w to write filename to floppy drive A for Help Example Rwfloppy r diskfile dat Rwfloppy w diskfile dat Perform the following steps to install the SCO OpenServer driver Step 1 Step 2 Step 3 Step 4 Boot from the SCO OpenServer CD ROM The system BIOS must support booting from a CD ROM BIOS settings might require changes to allow CD ROM booting See your system documentation On boot prompt type link after the prompt as shown below boot link You are prompted for the name of the packages to load What packages do you need loaded into the system or q to quit Type amird where amird is the name of the BTLD packages to be linked to the loaded system kernel After the kernel loads but before it runs link prompts you to insert the appropriate floppy diskette for each BTLD package amird you specified Insert the driver diskette in drive A to link the driver to the kern
6. the screen Press F6 if you need Note You must press lt F6 gt for the system to recognize the new Step 3 driver Select lt S gt to specify an additional device when the screen displays Setup could not determine the type of one or more mass storage devices The system prompts for the manufacturer supplied hardware support disk MegaRAID Device Driver Installation User s Guide 3 1 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Note If this screen does not display as the first user input then Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Step 10 pressing lt F6 gt was not recognized by the setup program Reboot the system and return to step 2 Insert the driver diskette containing the Windows 2000 device driver and press lt Enter gt Select the Windows 2000 adapter from the menu by using the arrow key to highlight it and pressing lt Enter gt Press lt Enter gt again to proceed Return to the Windows 2000 Setup screen Windows displays a Welcome to Setup window Press lt Enter gt to continue Follow the Microsoft Windows 2000 installation procedure by pressing lt C gt to continue Repeat this process for all the adapters on your system 3 2 Existing Windows 2000 System Driver Installation 3 2 Perform the following steps to install or update the MegaRAID device driver in an existing Windows 2000 system Step 1
7. 2 Added a note about operating system support in Chap ters 1 and 2 Added headings for Driver Functions Driver Updates and Technical Support in Chapter 1 Updated driver filenames in Chapter 1 Updated driver installation procedures in several chapters Technical Support LSI Logic provides technical support only for LSI Logic products purchased directly from LSI Logic or from an LSI Logic authorized reseller If you need help installing configuring or running your MegaRAID controller contact LSI Logic Technical Support at e f you purchased the MegaRAID controller from LSI Logic or from a certified LSI Logic reseller contact LSI Logic Technical Support at support lsil com 1 800 633 4545 or 678 728 1250 Please be prepared to specify the 10 digit number preceded by the letter E In Europe you can contact LSI Logic Technical Support at eurosup port Isil com 44 1344 413 441 English or 49 89 45833 338 Deutsch e If the MegaRAID controller was installed as part of a system manufactured by a company other than LSI Logic or if you purchased an LSI Logic product from an unauthorized reseller call the technical support department of the computer manufacturer or the unauthorized reseller LSI Logic does not provide direct technical support in these cases Preface vil Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved viii Preface Version 1 2 Copyright 2004 2005 by LSI Logi
8. Chapter 3 Windows 2000 Driver Installation provides installation instructions for Windows 2000 Chapter 4 Windows XP Driver Installation provides installation instructions for Windows XP Chapter 5 Windows Server 2003 Driver Installation provides installation instructions for Windows Server 2003 Chapter 6 Novell NetWare Driver Installation provides installation instructions for Novell NetWare Chapter 7 Red Hat Linux 3 and 4 Driver Installation provides installation instructions for Red Hat Linux Chapter 8 SuSE Linux 8 2 Driver Installation provides installation instructions for SUSE Linux MegaRAID Device Driver Installation User s Guide iii Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved e Chapter 9 SUSE Linux Enterprise Server SLES 9 Driver Installation provides installation instructions for SLES Linux e Chapter 10 SCO UnixWare 7 Driver Installation provides installation instructions for UnixWare e Chapter 11 SCO OpenServer Driver Installation provides installation instructions for SCO MegaRAID System Installation Sequences and Document Organization Sequence The following table outlines the installation configuration and management sequences for a MegaRAID Serial ATA system Each sequence consists of a series of steps and operations that the reference manual explains LSI Logic recommends performing the sequences in the order listed when you install and configure your S
9. USER S GUIDE MegaRAID Device Driver Installation February 2005 Version 1 2 LSIDKee 01 DB11 000018 02 This document contains proprietary information of LSI Logic Corporation The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation LSI Logic products are not intended for use in life support appliances devices or systems Use of any LSI Logic product in such applications without written consent of the appropriate LSI Logic officer is prohibited Document DB11 000018 02 February 2005 This document describes revision release 1 2 of LSI Logic Corporation s MegaRAID Device Driver and will remain the official reference source for all revisions releases of this product until rescinded by an update LSI Logic Corporation reserves the right to make changes to any products herein at any time without notice LSI Logic does not assume any responsibility or liability arising out of the application or use of any product described herein except as expressly agreed to in writing by LSI Logic nor does the purchase or use of a product from LSI Logic convey a license under any patent rights copyrights trademark rights or any other of the intellectual property rights of LSI Logic or third parties Copyright 2004 2005 by LSI Logic Corporation All rights reserved TRADEMARK ACKNOWLEDGMENT LSI Logic the LSI Logic logo desi
10. a PCI local bus The controller can run under MS DOS or any DOS compatible operating system using the standard AT BIOS INT 13h hard disk drive interface To use the controller with other operating systems you must install software drivers LSI Logic provides software drivers for the following operating systems e MS DOS version 6 xx or later e Microsoft Windows NT 4 0 2000 XP and Server 2003 e Novell NetWare versions 5 1 6 0 and 6 5 e Red Hat Linux versions 9 0 AS 2 1 and AS 3 0 e SuSE Linux versions 8 2 and 9 1 e SuSE Linux Enterprise Server 8 and 9 MegaRAID Device Driver Installation User s Guide 1 1 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved 1 1 1 e SCO OpenServer e SCO UnixWare 7 Note MegaRAID 320 1 and 320 2 adapters support Windows NT 4 0 but MegaRAID 320 2X 320 4X SATA150 2 150 4 and 150 6 adapters do not Driver Functions MegaRAID provides separate drivers for MegaRAID SCSI controllers and MegaRAID Serial ATA controllers The MegaRAID Ultra320 SCSI driver supports 320 Mbyte s data transfer using the Ultra320 SCSI protocol The MegaRAID Serial ATA driver supports 150 Mbyte s data transfer using the Serial ATA protocol Both drivers do the following e Support the PCI 2 2 protocol e Support multiple RAID Storage Adapters RSAs e Provide the ability to see newly configured logical drivers in Disk Administrator without rebooting the system e Allow deletion of th
11. anied your MegaRAID controller LSI Logic updates the MegaRAID device drivers frequently To ensure you have the current version of this driver download the driver from the LSI Logic web site http Avww Isilogic com See the readme file that accompanies the driver for any updated information To make the driver diskette extract the files from the Universal Driver Suite CD to a blank floppy diskette or download the driver files from the LSI Logic web page and extract them to an empty floppy diskette Label the diskette as the MegaRAID driver diskette for the given operating system Driver Names 1 3 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Table 1 1 Operating System DOS MegaRAID Device Driver Files SCSI Driver Filenames TEGACONF EXE EGASPI SYS Megarcdr SYS DOS utility Installation Reference Windows 2000 RAID2K sys NODEV INF OEMSETUP INF mraid2k ca TXTSETUP OE Chapter 3 Windows XP raid35x sys NODI IF OEMSETUP INF Chapter 4 Windows Server 2003 raid35x sys NODEV INF OEMSETUP INF Chapter 5 Novell NetWare IEGA4_XX DDI IEGAMGR NLM EGA4_XX HAI EGAMMIO NLM MEGAMON NLM Chapter 6 Red Hat Linux 3 megaraid2 o Red Hat Linux 4 megaraid_m
12. c Corporation All rights reserved Contents Chapier 1 Overview 1 1 Driver Description tA Driver Functions 1 12 Driver Updates 1 1 3 Technical Support 1 2 Driver Names Chapter 2 Windows NT 4 0 Driver Installation 21 New Windows NT 4 0 System Driver Installation 2 2 Existing Windows NT 4 0 System Driver Installation Chapter 3 Windows 2000 Driver Installation 3 1 New Windows 2000 System Driver Installation 3 2 Existing Windows 2000 System Driver Installation Chapter 4 Windows XP Driver Installation 4 1 New Windows XP System Driver Installation 4 2 Existing Windows XP System Driver Installation Chapter 5 Windows Server 2003 Driver Installation 5 1 New Windows Server 2003 System Installation 5 2 Existing Windows Server 2003 System Installation MegaRAID Device Driver Installation User s Guide Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved 1 1 1 2 a 1 3 1 3 2 1 3 1 3 2 4 1 4 2 5 1 Da Chapter 6 Novell NetWare Driver Installation 6 1 Novell NetWare Driver Files Description 6 2 New Novell NetWare System Driver Installation 6 3 Existing Novell NetWare System Driver Installation Chapter 7 Red Hat Linux 3 and 4 Driver Installation 7 1 New Red Hat Linux System Driver Installation 7 2 Existing Red Hat Linux System Driver Installation Chapter 8 SuSE Linux 8 2 Driver Installation Chapter 9 SuSE Linux Enterprise Server SLES 9 Driver Installation 9 1 New SuSE SLES Lin
13. d physical specifications jumper definitions and connector locations for the storage adapter MegaRAID SATA300 Storage Adapters User s Guide Document Number DB15 00031 1 00 This document explains how to install your MegaRAID SATA300 storage adapter in the host system In addition it provides the electrical and physical specifications jumper definitions and connector locations for the storage adapter MegaRAID Configuration Software User s Guide Document Number DB15 000269 01 This document explains the various RAID system configuration monitoring and management tools that MegaRAID provides This document provides step by step instructions for using the MegaRAID CU and WebBIOS CU BIOS based utilities as well as the MegaRAID Manager and Power Console Plus OS based tools The information in this document is independent of the back end bus and applies to both MegaRAID SCSI storage adapters and Serial ATA storage adapters Preface Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Conventions Used in This Manual Notation Example Start Programs Meaning and Use Used to indicate a series of selections in a GUI lt F6 gt lt N gt lt Enter gt Key presses are enclosed in angle brackets Courier typeface nwk file Names of commands directories filenames and on screen text are shown in Courier typeface bold typeface fdisp In a command line keyword
14. e last logical drive created using Power Console Plus see the MegaRAID Configuration Software User s Guide for more information e Support use of the remaining array capacity by Power Console Plus 1 1 2 Driver Updates 1 2 Because LSI Logic regularly updates device drivers there might be a feature added to your driver that is not included in the most recent manual publication If you have a question about a feature consult the readme file that accompanies the driver or contact your MegaRAID support representative Be sure to use the latest Service Packs provided by the operating system manufacturer You can download the latest drivers and software on the LSI Logic web site http www lsilogic com Access the download center and follow the steps to download the driver Overview Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved 1 1 3 Technical Support For questions or to obtain a driver for an operating system other than the ones previously listed contact the LSI Logic Technical Support team at e support Isil com e 1 678 728 1250 or 800 633 4545 option 3 e http Avww lsilogic com In Europe you can contact the LSI Logic Technical Support team at e eurosupport isil com e 44 1344 413 441 English or 49 89 45833 338 Deutsch 1 2 Driver Names Table 1 1 lists the device driver files for MegaRAID controllers The driver files are available on the Universal Driver Suite CD that accomp
15. el 11 2 Existing SCO OpenServer System Driver Installation Perform the following procedure if you are currently running SCO OpenServer and would like to access drives or arrays attached to the MegaRAID controller Step 1 Step 2 Download the file rwfloppy exe from the LSI Logic web site www lsilogic com at Support gt Download Center Under the heading Search by product category select RAID Adapters and press the arrow SCO OpenServer Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Step 3 Step 4 Step 5 At the Download center select your product from the drop down menu then select Drivers and press Next Use the page that displays to download the driver for your product to your hard drive Run the file rwfloppy exe and follow the prompt as shown below Usage rwfloppy r w filename where r to read from floppy drive A to filename w to write filename to floppy drive A for Help Example Rwfloppy r diskfile dat Rwfloppy w diskfile dat Perform the following steps to add the SCO OpenServer driver to an existing installation Step 1 Insert the floppy diskette into the A drive and type installpkg You are prompted for the name of the packages to load What packages do you need loaded into the system or q to quit Step 2 Type amird where amird is the name of the BTLD packages to be linked t
16. ell NetWare which the MegaRAID Monitor uses to monitor and report events on the adapter The event categories are Severe Warning and Information The notification is broadcast to the supervisor displayed locally on the console or displayed remotely All utilities and ASPI drivers expect the MegaRAID driver to pass the requests to the adapter You must load the HAM driver files first so that it can load the NIM files 6 2 New Novell NetWare System Driver Installation Follow the instructions in the Novell NetWare Installation Guide to install Novell NetWare in the server Perform the following steps to install Novell NetWare using the MegaRAID controller as a primary adapter Step 1 Boot from Novell NetWare Step 2 Follow the instructions on the screen until you reach the Device Driver screen which is used to modify drivers Step 3 Select Modify and press lt Enter gt Step 4 Select Storage Adapters on the Storage Driver Support screen and press lt Enter gt Step 5 Delete any existing MegaRAID adapter listings Step 6 Press lt Insert gt to add unlisted drivers Step 7 Press lt Insert gt again A path displays Step 8 Press lt F3 gt Step 9 Insert the driver diskette into the floppy drive and press lt Enter gt The system finds the HAM driver 6 2 Novell NetWare Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Note Make sure the foll
17. erial ATA system Understand RAID system theory and operation Reference Manual Install the MegaRAID Serial ATA storage adapter and the related hardware MegaRAID SATA150 Storage Adapters User s Guide MegaRAID SATA300 Storage Adapters User s Guide Configure the physical arrays and logical devices using either the MegaRAID Configuration Utility CU or the WebBIOS CU MegaRAID Configuration Software Users Guide Install the MegaRAID device drivers MegaRAID Device Driver Installation User s Guide Manage monitor and reconfigure the RAID array using either the MegaRAID Manager tool or the Power Console Plus tool Each tool runs under an operating system and can manage the RAID array while the system is operating Preface Version 1 2 MegaRAID Configuration Software User s Guide Copyright 2004 2005 by LSI Logic Corporation All rights reserved Related Publications MegaRAID 320 Storage Adapters User s Guide Document Number DB15 000260 05 This document explains how to install your MegaRAID SCSI storage adapter in the host system In addition it provides the electrical and physical specifications jumper definitions and connector locations for the storage adapter MegaRAID SATA150 Storage Adapters User s Guide Document Number DB15 000272 04 This document explains how to install your MegaRAID SATA150 storage adapter in the host system In addition it provides the electrical an
18. gaRAID device driver in an existing Windows Server 2003 system Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Boot Windows Server 2003 The Found New Hardware Wizard appears The information in the first page of this window identifies the SCSI controller and requests the driver diskette Insert the driver diskette into the floppy drive Select the Install Software Automatically option Click Next In some cases a message displays saying that this driver is not digitally signed This message informs you that a nonsigned driver is being installed If this message displays click Continue Anyway The system loads the driver from the Windows Server 2003 driver diskette and copies the driver to the system disk The Found New Hardware Wizard screen appears and displays the message The wizard has finished Click the Finish button to complete the driver upgrade Repeat this process for all the channels on your MegaRAID controller Windows Server 2003 Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Chapter 6 Novell NetWare Driver Installation This chapter provides installation instructions for the MegaRAID Novell NetWare driver and consists of the following sections e Section 6 1 Novell NetWare Driver Files Description e Section 6 2 New Novell NetWare System Driver Installation e Section 6 3 Existing Novell NetWare Syste
19. gn MegaRAID and Power Console Plus are trademarks or registered trademarks of LSI Logic Corporation MS DOS Windows and Windows NT are registered trademarks of Microsoft Corporation Novell and Netware are registered trademarks of Novell Inc Red Hat is a registered trademark of Red Hat Inc Linux is a registered trademark of Linus Torvalds SCO and SCO UnixWare are registered trademarks and OpenServer is a trademark of the SCO Group Inc All other brand and product names may be trademarks of their respective companies CD To receive product literature visit us at http www Isilogic com For a current list of our distributors sales offices and design resource centers view our web page located at http www Isilogic com contacts index html Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Audience Organization Preface This manual is the primary reference for the operating system drivers provided with the LSI Logic MegaRAID devices It describes the drivers for all supported operating systems and explains how to install them This document is intended for people installing an operating system driver for a MegaRAID controller This document has the following chapters Chapter 1 Overview describes the MegaRAID controller and lists the operating systems for which drivers are provided Chapter 2 Windows NT 4 0 Driver Installation provides installation instructions for Windows NT
20. ing SCO UnixWare 7 System Driver Installation Perform the following procedure if you are currently running SCO UnixWare 7 and would like to access drives or arrays attached to the MegaRAID controller Step 1 Step 2 Step 3 Step 4 Download the file rwfloppy exe from the LSI Logic web site www lsilogic com at Support Download Center Under the heading Search by product category select RAID Adapters and press the arrow At the Download center select your product from the drop down menu then select Drivers and press Next Use the page that displays to download the driver for your product to your hard drive SCO UnixWare 7 Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Step 5 Run the file rwfloppy exe and follow the prompt as shown below Usage rwfloppy r w filename where r to read from floppy drive A to filename w to write filename to floppy drive A for Help Example Rwfloppy r diskfile dat Rwfloppy w diskfile dat Perform the following steps to add a SCO UnixWare 7 driver to an existing installation Step 1 Insert the floppy diskette into the A drive and type pkgadd d diskettel You are prompted for the name of the packages to load Select package s you wish to process all to process all packages Step 2 Type mega where mega is the name of the BTLD packages to be linked to
21. ion utility The following message displays New hardware found Would you like to configure this Storage Controller LSI MegaRAID U320 2 RAID Controller Click Yes The YaST Disk controller configuration window displays Verify the LSI MegaRAID U320 2 RAID controller is listed Select the driver module to use from the list If you want to include the driver in the initrd check the Load module in initrd box Click Finish The system installs the driver for the controller in the kernel You can access all connected or configured devices on the controller 9 2 SUSE Linux Enterprise Server SLES 9 Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Chapter 10 SCO UnixWare 7 Driver Installation This chapter describes the installation of the SCO UnixWare 7 driver and consists of the following sections e Section 10 1 New SCO UnixWare 7 System Driver Installation e Section 10 2 Existing SCO UnixWare 7 System Driver Installation 10 1 New SCO UnixWare 7 System Driver Installation This procedure installs the MegaRAID device driver in a new SCO UnixWare 7 system You must first prepare a driver diskette for MegaRAID then install the driver Perform the following steps to create a driver diskette Step 1 Download the file rwfloppy exe from the LSI Logic web site www lsilogic com at Support gt Download Center Step 2 Under the headi
22. l the MegaRAID driver in a new Windows XP system Windows XP automatically adds the driver to the registry and copies the driver to the appropriate directory Step 1 Step 2 Start the Windows XP installation by booting from the Windows XP CD ROM The system BIOS must support booting from a CD ROM BIOS settings might require changes to allow CD ROM booting See your system documentation Press lt F6 gt when the following displays at the bottom of the screen Press F6 if you need to install Note You must press lt F6 gt for the system to recognize the new driver Step 3 Select lt S gt to specify an additional device when the screen displays Setup could not determine the type The system prompts for the manufacturer supplied hardware support disk MegaRAID Device Driver Installation User s Guide 4 1 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Note If this screen does not display as the first user input then Step 4 Step 5 Step 6 the lt F6 gt key press was not recognized by the setup program Reboot the system and return to step 2 Insert the Window XP driver diskette and press lt Enter gt Select the appropriate Windows XP adapter from the menu by using the arrow key to highlight it and then press lt Enter gt to proceed Follow the Windows XP installation procedure 4 2 Existing Windows XP System Driver Installation 4 2 Perform the foll
23. lenames 1 4 installation 7 1 Red Hat Linux 9 0 AS 2 1 AS 3 0 1 1 RSA 1 2 s SCO installation 11 1 SCO OpenServer 5 1 2 SCO OpenServer driver filenames 1 4 installation 11 1 SCO UnixWare 7 1 2 driver 10 1 installation 10 1 SCO UnixWare driver filenames 1 4 installation 10 1 Serial ATA driver 1 2 SLES installation 9 1 SuSE Linux driver filenames 1 4 installation 8 1 SuSE Linux 8 2 9 1 1 1 SuSE Linux Enterprise Server 8 9 1 1 SuSE Linux Enterprise Server driver filenames 1 4 T technical support 1 2 U Ultra320 SCSI driver 1 2 w web site 1 3 Windows 2000 driver filenames 1 4 installation 3 1 Windows NT 4 0 driver installation 2 1 10 1 11 1 Windows operating systems 1 1 MegaRAID Device Driver Installation User s Guide IX 1 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Windows Server 2003 driver filenames 1 4 installation 5 1 Windows XP driver filenames 1 4 installation 4 1 IX 2 Index Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Customer Feedback We would appreciate your feedback on this document Please copy the following page add your comments and fax it to us at the number shown If appropriate please also fax copies of any marked up pages from this document Important Please include your name phone number fax number and company address so that we may contact you directly for clarification or additional inf
24. m Driver Installation 6 1 Novell NetWare Driver Files Description The MegaRAID Novell NetWare driver and utilities support logical drives configured on the MegaRAID controller This driver supports up to 12 MegaRAID controllers Important The logical drives configured on the host adapter are registered with the operating system as separate logical units Table 6 1 describes the MegaRAID Novell NetWare driver files Table 6 1 MegaRAID Novell NetWare Driver Files Description Filename Description This file is the MegaRAID host adapter module HAM This driver supports the NPA Diagnostics option by using the NWDIAG flag which is specified on the command line when the driver loads The driver is a re entrant module It registers one adapter when you issue the Novell NetWare LOAD command to load the driver IRGA4XX DDI This file is the device driver installation file It is needed to install the MegaRAID HAM driver This file is the Media Manager Interface module for the MEGA4_XX HAM driver MegaRAID Device Driver Installation User s Guide 6 1 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Table 6 1 MegaRAID Novell NetWare Driver Files Description Cont Filename Description This file is the MegaRAID Configuration and Management utility Do not unload this file using the UNLOAD console command This file is the monitor program for Nov
25. m ko megaraid_mbox ko Chapter 7 SuSE Linux 8 2 megaraid2 o Chapter 8 SuSE Linux 9 1 megaraid_mm ko megaraid_mbox ko SuSE Linux Enterprise Server 8 megaraid2 o SuSE Linux Enterprise Server 9 megaraid_mm ko megaraid_mbox ko Chapter 9 SCO UnixWare 7 a Host Board Adapter HBA package that contains mega HBA driver amirdmon monitor and megamgr configurator Chapter 10 SCO OpenServer 5 1 4 an HBA package that contains mega HBA driver amirdmon monitor and megamgr configurator Overview Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Chapter 11 Chapter 2 Windows NT 4 0 Driver Installation This chapter describes the installation of the Windows NT 4 0 driver and consists of the following sections e Section 2 1 New Windows NT 4 0 System Driver Installation e Section 2 2 Existing Windows NT 4 0 System Driver Installation Note MegaRAID 320 1 and 320 2 adapters support Windows NT 4 0 but MegaRAID 320 2X 320 4X SATA150 2 150 4 and 150 6 adapters do not 2 1 New Windows NT 4 0 System Driver Installation Perform the following steps to install the MegaRAID device driver in a new Window NT 4 0 system Windows NT 4 0 automatically adds the driver to the registery and copies the driver to the appropriate directory Step 1 Start the Windows NT 4 0 installation by booting from the Windows NT 4 0 CD ROM
26. ng Search by product category select RAID Adapters and press the arrow Step 3 At the Download center select your product from the drop down menu then select Drivers and press Next Step 4 Use the page that displays to download the driver for your product to your hard drive Step 5 Run the file rwfloppy exe and follow the prompt as shown below Usage rwfloppy r w filename where r to read from floppy drive A to filename MegaRAID Device Driver Installation User s Guide 10 1 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved w to write filename to floppy drive A for Help Example Rwfloppy r diskfile dat Rwfloppy w diskfile dat Perform the following steps to install a SCO UnixWare 7 driver Step 1 Step 2 Step 3 Boot from the SCO UnixWare 7 CD ROM There is a prompt asking whether you want to install from an HBA disk The system BIOS must support booting from a CD ROM BIOS settings might require changes to allow CD ROM booting See your system documentation If you want to install from an HBA disk insert the floppy driver diskette into drive A The driver packages load to the installation memory After the kernel loads but before it runs the installation process prompts you to insert the appropriate floppy diskette for each BTLD package mega you specified Insert the driver diskette in drive A to link the driver to the kernel 10 2 Exist
27. nstallation Perform the following steps to install the MegaRAID device driver in a new SuSE SLES Linux system Step 1 Boot the server with the SLES CD ROM Disk 1 The system BIOS must support booting from a CD ROM BIOS settings might require changes to allow CD ROM booting See your system documentation Step 2 At the first screen immediately press lt Alt gt Step 3 Put the driver update diskette in the drive bay and install normally The installation process should pick up the new driver from the floppy diskette Step 4 Switch to console 4 to verify the correct driver Note United Linux has install issues in some Dell servers While the MegaRAID driver is being installed press lt Alt gt lt F4 gt to switch to console 4 If there are error messages the ACPI needs to be disabled in this server To disable ACPI reboot MegaRAID Device Driver Installation User s Guide 9 1 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved the machine with CD 1 and press lt Alt gt immediately Next type the following kernel parameters acpi off and install normally 9 2 SuSE SLES 9 Existing Driver Installation Perform the following steps to add the SUSE SLES 9 driver to an existing installation Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Power up the system Log in to the system The system detects the controller and invokes the SuSE hardware detect
28. o the loaded system kernel After the driver package is installed the driver needs to link to the kernel Step 3 Enter the following command etc conf bin idbuild Existing SCO OpenServer System Driver Installation 11 3 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Step 4 Step 5 Select lt Y gt yes at the following prompts Do you want this kernel to boot by default y n Do you want the kernel environment rebuilt y n Reboot the server SCO OpenServer Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Index D device driver files 1 4 DOS driver filenames 1 4 driver diskette 1 3 filenames 1 4 Serial ATA 1 2 supported operating systems 1 1 Ultra320 SCSI 1 2 driver installation NetWare 6 2 Novell NetWare 6 1 Red Hat Linux 7 1 SCO 11 1 SCO UnixWare 7 10 1 SuSE 8 1 SuSE Linux Enterprise Server SLES 8 driver 9 1 Windows 2000 3 1 Windows NT 4 0 2 1 10 1 11 1 Windows XP 4 1 F filenames 1 4 L LSI Logic web site 1 2 1 3 M MegaRAID Serial ATA driver 1 2 MegaRAID Ultra320 SCSI driver 1 2 MS DOS 1 1 N NetWare driver installation 6 2 Novell NetWare driver filenames 1 4 driver files 6 1 driver installation 6 1 number of supported drives 6 1 Novell NetWare 5 1 6 0 and 6 5 1 1 NPA Diagnostics 6 1 O operating system support 1 1 P PCI local bus 1 1 1 2 R Red Hat Linux driver fi
29. ormation Thank you for your help in improving the quality of our documents MegaRAID Device Driver Installation User s Guide Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Reader s Comments Fax your comments to LSI Logic Corporation Technical Publications M S AF 198 Fax 408 433 4333 Please tell us how you rate this document MegaRAID Device Driver Installation User s Guide Place a check mark in the appropriate blank for each category Excellent Good Average Fair Poor Completeness of information Clarity of information Ease of finding information Technical content Usefulness of examples and illustrations Overall manual What could we do to improve this document If you found errors in this document please specify the error and page number If appropriate please fax a marked up copy of the page s Please complete the information below so that we may contact you directly for clarification or additional information Name Date Telephone Fax Title Department Mail Stop Company Name Street City State Zip Customer Feedback Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved
30. ort booting from a CD ROM BIOS settings might require changes to allow CD ROM booting See your system documentation Step 2 At the first screen immediately press lt Alt gt Step 3 Put the driver update diskette in the drive bay and install normally The installation process should pick up the new driver from the floppy diskette Step 4 Switch to console 4 to verify the correct driver Note United Linux has install issues in some Dell servers While the MegaRAID driver is being installed press lt Alt gt lt F4 gt to switch to console 4 If there are error messages the ACPI needs to be disabled in this server To disable ACPI reboot the machine with CD 1 and perform steps 1 and 2 above Next type the following kernel parameters acpi off and install normally MegaRAID Device Driver Installation User s Guide 8 1 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved 8 2 SuSE Linux 8 2 Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Chapter 9 SuSE Linux Enterprise Server SLES 9 Driver Installation This chapter describes how to install the SUSE Linux Enterprise Server SLES 9 0 driver in the RAID configured drives It consists of the following sections e Section 9 1 New SuSE SLES Linux System Driver Installation e Section 9 2 SuSE SLES 9 Existing Driver Installation 9 1 New SuSE SLES Linux System Driver I
31. owing components are available on the floppy diskette as the driver requires these files when loading EGAMMIO NLM EGAMON NLI EGAMGR NLI Step 10 Press lt Tab gt Step 11 Select the Driver Summary screen and press lt Enter gt Step 12 Continue the Novell NetWare installation procedure 6 3 Existing Novell NetWare System Driver Installation Perform the following steps to add the Novell NetWare driver to an existing installation Step 1 For Novell NetWare 5 1 and later type at the root prompt nwconfig and press lt Enter gt The Configuration Options screen displays Step 2 Select Drive Options and press lt Enter gt A window displays Step 3 Select Configure Disk and Storage Device Options and press lt Enter gt Step 4 Select one of the following options displayed in the window e Discover and Load an Additional Driver If you select Discover and Load an Additional Driver the system discovers the extra unit The system prompts you to select a driver from the list Press lt Insert gt to insert the driver This completes the procedure Existing Novell NetWare System Driver Installation 6 3 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved 6 4 Select an Additional Driver If you select Select an Additional Driver the Select a Driver screen displays Press lt Insert gt Follow the instructions that appear Insert a flo
32. owing steps to install or upgrade the MegaRAID driver in an existing Window XP system Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Boot Windows XP The Found New Hardware Wizard appears The information in the first page of this window identifies the controller and requests the driver diskette Insert the Windows XP driver diskette into the floppy drive Select the Install Software Automatically option Click the Next button In some cases a message displays saying that this driver is not digitally signed This message informs you that a nonsigned driver is being installed If this message displays click Continue Anyway The system loads the driver from the Windows XP driver diskette and copies the driver to the system disk The Found New Hardware Wizard screen appears and displays the message The wizard has finished Click the Finish button to complete the driver upgrade Repeat this process for additional adapters if present Windows XP Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Chapter 5 Windows Server 2003 Driver Installation This chapter describes the installation of the Windows Server 2003 driver and consists of the following sections e Section 5 1 New Windows Server 2003 System Installation e Section 5 2 Existing Windows Server 2003 System Installation 5 1 New Windows Server 2003 System Installation
33. ppy diskette into the floppy drive and press lt Enter gt The system finds the driver and installs it Novell NetWare Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Chapter 7 Red Hat Linux 3 and 4 Driver Installation This chapter describes the installation of the device driver in new Red Hat Linux 3 and 4 systems and the update to the Red Hat Linux driver on an existing Red Hat Linux system It consists of the following sections e Section 7 1 New Red Hat Linux System Driver Installation e Section 7 2 Existing Red Hat Linux System Driver Installation Refer to the release notes that accompanied the driver for information on an existing Red Hat Linux system 7 1 New Red Hat Linux System Driver Installation Perform the following steps to install the MegaRAID device driver in a new Red Hat Linux system Step 1 Create a driver diskette using the Linux driver image from the Universal Driver Suite CD Step 2 Boot to CD ROM with Disk 1 Step 3 Type linux dd Step 4 Insert the driver diskette The utility locates and loads the driver for your device Step 5 Follow the Red Hat Linux installation procedure to complete the installation MegaRAID Device Driver Installation User s Guide 7 1 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved 7 2 Existing Red Hat Linux System Driver Installation Perform the following p
34. rocedure to add the Red Hat Linux 4 0 driver to an existing installation Step 1 Power up the system The system will initialize hardware Step 2 The system detects the controller and invokes Kudzu the Red Hat Linux hardware configuration utility The following RAID controller is added to your system LSI Logic Symbios Logic MegaRAID You can select one of the following options e Configure the device e Ignore the device No configuration will be added but you will not be prompted if the device is detected on subsequent reboots e Do nothing No configuration will be added and the device will show up as new if it is detected on subsequent reboots Step 3 Highlight the Configure tab and press lt Enter gt The system configures the controller and installs the appropriate driver in the kernel Step 4 The system boots and displays the devices connected or configured on the controller 7 2 Red Hat Linux 3 and 4 Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Chapter 8 SuSE Linux 8 2 Driver Installation This chapter describes the installation of the device driver in new SuSE Linux 8 2 systems Refer to the release notes that accompanied the driver for information on updating the SuSE Linux driver on an existing SuSE Linux system Perform the following steps to install the driver Step 1 Boot the server with the SuSE CD ROM Disk 1 The system BIOS must supp
35. s are shown in bold non italic typeface Enter them exactly as shown italics module In command lines and names italics indicate user vari ables Italicized text must be replaced with appropriate user specified items Enter items of the type called for using lower case italic underscore full_pathname When an underscore appears in an italicized string enter a user supplied item of the type called for with no spaces initial capital letters Undo Edit Apply Names of menu commands options check buttons text buttons options buttons text boxes list boxes etc are shown in text with initial capital lettering to avoid misread ing These elements may appear on your screen in all lower case brackets version You may but need not select one item enclosed within brackets Do not enter the brackets ellipses vi option Preface Version 1 2 In command formats elements preceding ellipses may be repeated any number of times Do not enter the ellipses In menu items if an ellipsis appears in an item clicking that item brings up a dialog box Copyright 2004 2005 by LSI Logic Corporation All rights reserved Revision History Version Changes February 2002 Version 1 0 Initial release July 2003 Version 1 1 Added chapters for SUSE 8 2 and 9 1 SUSE Linux Enter prise Server SLES 8 and 9 SCO UnixWare 7 and SCO OpenServer 5 February 2005 Version 1
36. the loaded system kernel A message confirms that the installation of mega was successful After the driver package is installed the driver needs to link to the kernel Step 3 Enter the following command etc conf bin idbuild M mega Step 4 Select lt Y gt yes at the following prompts Do you want this kernel to boot by default y n Do you want the kernel environment rebuilt y n Step 5 Reboot the server Existing SCO UnixWare 7 System Driver Installation 10 3 Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved 10 4 SCO UnixWare 7 Driver Installation Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Chapter 11 SCO OpenServer Driver Installation This chapter describes the installation of the SCO OpenServer driver and consists of the following sections e Section 11 1 New SCO OpenServer System Driver Installation e Section 11 2 Existing SCO OpenServer System Driver Installation 11 1 New SCO OpenServer System Driver Installation This procedure installs the MegaRAID device driver in a new SCO OpenServer system You must first prepare a driver diskette for MegaRAID then install the driver Perform the following steps to create a driver diskette Step 1 Download the file rwfloppy exe from the LSI Logic web site www lsilogic com at Support gt Download Center Step 2 Under the heading Search by product category select RAID Adapters and
37. ux System Driver Installation 9 2 SuSE SLES 9 Existing Driver Installation Chapter 10 SCO UnixWare 7 Driver Installation 10 1 New SCO UnixWare 7 System Driver Installation 10 2 Existing SCO UnixWare 7 System Driver Installation Chapter 11 SCO OpenServer Driver Installation 11 1 New SCO OpenServer System Driver Installation 11 2 Existing SCO OpenServer System Driver Installation Index Customer Feedback x Contents Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved 6 1 6 2 6 3 41 7 2 9 1 10 1 10 2 11 1 112 Tables 11 MegaRAID Device Driver Files 6 1 MegaRAID Novell NetWare Driver Files Description Contents Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved 1 4 6 1 xi xii Contents Version 1 2 Copyright 2004 2005 by LSI Logic Corporation All rights reserved Chapter 1 Overview This chapter provides an overview of the drivers for the MegaRAID controllers It consists of the following sections e Section 1 1 Driver Description e Section 1 2 Driver Names Subsequent chapters in this manual provide detailed installation instructions for each operating system Use the latest updates provided by the operating system manufacturer and review the readme file that accompanies the driver for any updated information 1 1 Driver Description You can install the MegaRAID controller in any IBM AT compatible computer that has
Download Pdf Manuals
Related Search