Home

TV Operating Instructions

1. o ay E T a TE N X AUDIO OUT L R TV set Analog amplifier For selecting the amplifier type and making other settings see explanations of the setting possibilities left hand column Operating additional equipment Assignment of the digital audio input In order to be able to hear the digital sound of an external device con nected to an AV input an AV input can be assigned to the digital audio input socket AUDIO DIGITAL IN When switching to this AV input the digital audio signal applied to the AUDIO DIGITAL IN input is passed on to the integrated Dolby Digital Decoder and the digital audio output socket AUDIO DIGITAL OUT You will then hear the digital sound of the assigned AV input instead of the analogue sound if available Connecting devices to the digital audio input For the digital audio playback from an external device e g the DVD player you have to feed the digital audio signal to the TV set The external digital audio signal can be played back via the integrated Dolby Digital Decoder in the TV set via an externally connected digital audio amplifier or Loewe Auro ug Tan external audio amplifier is used this must be regis tered in the sound components wizard see page 46 Call TV menu o N 4 gt Select Connections BF e go to the menu line below 4 gt Select Miscellaneous v go to the menu line below d gt Select Assign digital audio input v go to the menu li
2. a e Select insertion position at which the marked Station is to be inserted The insertion position can also be selected with the numeric buttons OK to execute the move OK removes the marked station from the favourites list Picture in Picture Picture in Picture PIP The concurrent display of two different images is referred to as Picture in Picture mg The coloured buttons do not work as described below for TV sets with MHEG 5 Software but they operate as described on page 33 Digital Teletext im A Concurrent representation of two HDTV signals is not possible mg A Concurrent representation of two coded stations is not possible me Picture change and station selection is restricted during recording Your TV set distinguishes between two PIP displays Split screen In this case the screen is divided in the middle and the ad ditonal PIP image is shown on the right side of the screen Both images are compressed horizontally and each gets half of the screen Small PIP In this case a small PIP image is inserted in the TV picture The PIP operation distinguishes between two functionalities Standard PIP Stations freely selectable and changeable for PIP and TV picture coloured buttons have PIP specific meaning see below iPIP The TV picture is moved to the PIP picture when you press the PIP button The station of the TV picture is now freely selectable When you press the PIP button again the PIP pic tur
3. A Active speakers 43 Adjusting the picture 21 Adjusting the sound 20 Alarm 16 Assist 7 15 Audio amplifiers 46 Auro Loewe Preceiver 41 Auto format 21 Automatic diming 21 AV audio signal 20 AV selection 19 B Balance 20 Batteries 10 Brightness 21 Button functions 22 C CA module 34 Card reader 50 Change favourites lists 27 Add station 27 Delete station 27 Move station 27 Rename list 27 Change station 26 Delete station 26 Move station 26 Rename station 26 Restore station 26 CI slot 34 Coloured buttons 22 23 32 Component IN 40 Connecting the antenna 10 Connections 5 Connection wizard 37 Contrast 21 Control unit 4 Copy protection 49 D Data capture 31 Device connection wizard 37 Digital audio input 47 Digital Link 49 Digital Link HD 39 Digital Link Plus 48 49 Digital teletext 33 Display 11 DVB software 35 DVB subtitles 23 DVD button 52 DVI 39 E Encrypted stations 12 24 34 EPG 30 F Factory settings picture sound 21 Favorites 19 File folder 51 First installation wizard 11 FLOF 32 H HDMI 39 Headphone volume 20 Help 14 HiFi AV amplifier 46 Index in the TV set 15 Individual Sound 42 Into Display 14 iPIP 28 L Language 11 15 55 Language audio selection 23 Last station 22 LNC LNB 12 Loudness 20 M Mains switch 11 Manual station search 25 38 Manual timer 49 Maximum volume 20 Memorise 30 Memory medium 51 Menu operation 14 Mobile
4. AUDIO LINK l i I W Ka AUDIO LINK cable subwoofer with AUDIO LINK N 6 pole cinch cable TV set OECOSPLOS o C 1000 EH KR EH Connecting Loewe Individual Sound Subwoofer to the TV set Operating additional equipment Connecting other speaker systems or active speakers to the Dolby Digital Decoder If you want to use another similar speaker system or active speakers you can connect these to the AUDIO LINK interface of the TV set with an adapter cable A comparable speaker system is connected in a similar way to that de scribed above for subwoofer without AUDIO LINK interface The adapter cable is available from your dealer see Accessories page 58 Connecting active speakers Switch off all devices before connecting Plug the adapter cable into the AUDIO LINK interface of the TV set Con nect the cinch connections of the adapter cable to the connections of the corresponding active speakers The cinch connections of the adapter cable are labelled R for Front right SR for Surround right L for Front left SL for Surround left C for Center SUB for Subwoofer The connections on the adapter cable are preamplifier outputs Therefore only active speakers may be connected directly to the adapter cable Front Right Front Left Centre Subwoofer Surround Right Surround Left Bae O mmm mamm E WE We 100000 eoon Connection of active spea
5. D Y C only with SVHS Link Plus AGIO IN sca scans L R P AE L R 57 Accessories Accessories Trim With your Individual Compose device it is possible to replace the laterally attached trim panels to match the ambiance of your home There are different surface structures or colours that can be selected for your device Please contact your dealer in this regard Wood trim is a natural product In this case UV light strong sunlight can cause slight discoloration Stereospeaker Compose 2 pieces Add two stereo speakers to your Individual Compose which can be fixed directly to the TV set or mounted separately on the wall Centerspeaker Compose An external centre speaker is recommended for perfect spatial sound It can be installed on a table stand or mounted on the wall A visually attrac tive solution is the Center Floor Stand Compose in which the loudspeaker is already integrated in the installation solution The Centerspeaker Compose can be combined with the Loewe Individual Sound System Loewe Individual Sound The Individual Compose can be perfectly supplemented with the Individual Sound speaker system Numerous speaker combination possibilities with standard speakers staellite soeakers and a subwoofer can be implemented Here as well it is possible to choose the colours of housing and trim Loewe Individual Sound Projector With the Loewe Individual Sound Projector you can easily enjoy digital Surround Soun
6. 4 gt yes is the selection for subwoofer m fno subwoofer is connected the front speakers transmit the sound parts intended for the subwoofer as far as possible additionally continued on the next page gt Operating additional equipment k bL d OK continue to set the Distance to left front speaker im Measurethbe distances from your listening position to the front surround and centre speakers respectively The Dolby Digital Decoder calculates the delay times for the speaker signals from these so that they reach the listener simultaneously L Sound components _ E 4 2 m E l er d gt Set the distance between the left front speaker and your listening position in 10 cm steps OK continue respectively to the other speakers and d gt adjust the distance m After setting the distance for the centre speaker OK continue to Adjust speaker level ery _ d 1 Ce SSS lt gt d gt Adjust the volume for each speaker v a Select speakers manually im FOr balanced audio reproduction all speakers should be set at the same volume level A noise signal will be reproduced automatically on each speaker in succession Ajust every speaker to equal perceived volume from your listening position OK continue to Subwoofer phase A 0 lt ox Switch to a station with music with P P or start playback with music on a DVD player 4 gt Test both valuest and 180 a
7. select soon for stations select all and for topics select News Then all the news programmes beginning in the future will be listed in the programme list below If the line Time is selected then you can enter the time after which the programs will be displayed via the nu meric buttons of the remote control The broadcasts are sorted according to the order of the station list within the selected time window If a favourites list has been selected only the programmes of stations from the favourites list are displayed in the programme list If has been selected a single sta tion can be selected Then only the programmes of this station are displayed Before pressing the blue button to leave the upper selec tion lines select one of the preceding lines If you then switch back to the programme list you can change this menu line with 4 gt without having to leave the pro gramme list If you have marked Time then you can enter the time after which the programmes will be displayed with the numeric buttons of the remote control Paging through the programme list P LI P P paging backwards forwards In the entries for Date and Time you will see changes in time as well as in date when paging Scrolling in the programme list is also possible when the selection is at the top of the specifications Electronic Programme Guide Calling additional information about the programmes ug Brief information abou
8. 48 29 60 Fax 34 913 291675 Email loewe maygap com LE Loewe Opta France S A 13 rue du Depot Parc del l Europe BP 10010 67014 Strasbourg Cedex France Tel 33 3 88 79 72 50 Fax 33 3 88 79 72 59 Email loewe france wanadoo fr EIN Kjaerulff 1 OY Uudenmaantie 100 20760 Piispanristi Finland Tel 358 20 751 3800 Fax 358 20 751 3801 Email Finland kjaerulff1 com Loewe UK Limited Century Court Riverside Way Riverside Business Park Irvine Ayrshire KA11 5DD UK Tel 44 1294 315 000 Fax 44 1294 315 001 Email enquiries loewe uk com SIBA Engineering S A 6 Kifisou Av 122 42 Aegaleo Hellas Tel 30 210 5913793 Fax 30 210 5317755 Email service siba gr CH Basys Magyarorszagi KFT Epitok utja 2 4 2040 Buda rs Magyar Tel 36 23 41 56 37 121 Fax 36 23 41 51 82 Email basys mail basys hu CD Loewe Italiana SRL Largo del Perlar 12 37135 Verona VR Italia Tel 39 045 82 51 619 Fax 39 045 82 51 622 Email Angelo Lorenzi loewe it CL PL Trading pz 2004 Ltd 27 Aliat Hanoar St Givataiim 53401 Israel Tel 972 3 57 27 155 Fax 972 3 57 27 150 Email info loewe co il QD Mirage Holdings Ltd Flamingo Complex Cannon Road Qormi Malta Tel 356 22 79 40 00 Fax 356 21 44 59 83 Email servicing mirage com mt SOMARA S A 377 Rue Mustapha El Maani 20000 Casablanca Morocco Tel 212 22 22 03 08 Fax 212 22 26
9. Is started automatically at the end of the initial installation wizard but can also be called separately see page 41 You will find the sound components wizard in the TV menu under Connections gt Sound components Assist You can select the most important operating modes directly with the Assist menu ASSIST button Selectable modes are TV Radio digital Teletext DR archive PhotoViewer and Index see page 15 Programming and managing recordings The recording wizard helps you to program a video recording with a video recorder DVD recorder or the integrated Digital Recorder see page 48 Station list The station list is a list of all stored stations You can also use the station list for switching stations conveniently see page 18 Software update wizard The latest software for your TV set can be loaded via satellite or via USB Stick see page 35 Info display and TV index An information display for each menu item The info display automatically shows content based info texts in the upper part of the screen for each menu item It forms a convenient operating system with the index see page 14 An index in the TV set The index gives you an overview of the functional scope of your TV set You can also start wizards and menu settings directly from here see page 15 E Index Maret r ve och Integrated features Repeat initial installation x Access code ASSIST Automatic dimmer Automatic station
10. Motoren Fussball Heimsieg fur den Meister 14 00 Tagesschau v a mark topic area d gt select topic column Tagesschau 110 112 Kultur Gesellschaft Lotto Toto 6 L va select topic Wirtschaft tagesschau sage selection OK to call the page GB 32 Teletext Programming timer recordings via Teletext Ge m Teletext is started if not press the TEXT button Call the programme pages of the current station O V Green button Go to the appropriate page v a Select the desired programme OK to programme the recording Change the appropriate recording data in the following menu Timer data if necessary see also page 48 the direct recording path OK to confirm Teletext menu In the Teletext menu you can among other things activate news reveal pages and configure the teletext with the Settings menu function Starting the Teletext menu m Teletext is started if not press the TEXT button Call the Teletext menu ARD Text Australien Keine Zugest ndnisse Tote bei Zugungl ck in Schweden Do 07 09 06 Tennis Auftaktmatch wurde abgebrochen Formel 1 Neues Reglement f r Motoren Fussball Heimsieg f r den Meister 14 00 Tagesschau Tagesschau Nette Teletext menu Newsflash EE 110 112 Kultur A A Explanations of the Teletext menu functions Newsflash Reveal The current page is hidden when you activate New mess A symbol at the top l
11. R PC IN 4 gt Select PC IN socket d OK to switch over Ne Adapting the geometry only possible with certain signals This is where the picture can be properly positioned and the position of the picture horizontal and vertical can be moved so that it fills the entire screen Call TV menu e 4 gt Selecting and adjusting the Geometry Call TV menu d gt Select Picture v go to the menu line below 4 gt Select and set colour standard for PCs RGB fur STB Ycc rare Ypp or RGB If the wrong standard is set then the colours will not be displayed correctly 39 Operating additional equipment Connecting the audio signal from the PC or from the SetTopBox Analogue audio signal Connect the analogue audio signal from the PC or the SetTopBox via stereo cable to the AUDIO IN2 jack on the TV set The sound is played via the speakers connected to the TV set or a speaker system Digital audio signal im An external digital audio signal can be reproduced via the integrated Dolby Digital Decoder or via an externally connected digital audio amplifier Connect the digital audio signal from the PC or the SetTop Box via a simple cinch cable to the AUDIO DIGITAL IN socket on the TV set The digital audio input can be assigned to the PC IN socket by the TV menu gt Connections Miscellaneous Assign digital audio input see page 47 For an external digital audio amplifier mg Externalaudio
12. Sound on the Dolby Digital Decoder EE DUE EEN 42 Connecting other speaker systems or active speakers to the Dolby Digital BEER 43 Adjusting the speaker evetem EEN 43 Connecting audio amplifiers 0 eee eceeeeeeeceeeeteeseseeeceeeceeseterseseeteeeeeeeeen 46 Assignment of the digital audio input eee ceecetetetseseteteeseseetetsetetenetees 47 Audio connection in HDMI DVI devices 0 ececeeeeececececetreecereeecenreseetneesnnetens 47 e WEE 47 The direct way TOT ECONG deceeegegdegeeete egene Et 48 Timer recording with external devicgs EEN 49 FOO NC EN 50 Operating ee 32 Seier 54 Troubleshooting ccccccscecseeescseeeseeseeeaeseneeseeeneeeeeseeesaesesessaeseaseseennesaes 55 Technical data sece aaa 57 Goneri Gai eeren r a A a a 57 Ste 57 Beiler eR E ese annem 57 ae e e E A E A O E E 58 PGS SONOS beet 58 EE 59 GOS SAE Y cecicureasicesciersnitvosencssacyn acawausiivanadecaiwsenece testo noaeteussennvenpexstannermaepresvant 60 ING OX E 63 GENEE 64 Please fold out this page Remote Control TV Functions Switch on off page 20 cece ee SE off on Sf stant THOUS aces cetscacductsven acs page 11 page BJ LED display for current operating mode ege 10 a E Switch over to TV mode Ss Ya Witch over to radio Mode oe page 11 36 TV REC DVD RODS EEN Switch over to operate recorder Sa Switch over to operate DVD olaver page 52 KEE E Timer overview on off D
13. This should only be changed if stations with other standards are to be searched You can state whether coded stations are to be searched for in the search update Select yes then coded stations are also searched for However these stations can only be received in connection with a CA module and the ap propriate Smart Card Ask your dealer which Smart Card you need to receive certain stations Handling of the CA module is described on page 34 If you want to run the station search independently of the channel grid select frequency search for the search method With the selection of set location the conventional set tings will be preset Only change this if you know other symbol rates and modulation types or if you have to specify the network ID for your cable network informa tion available from your cable network provider If you want to run the station search independently of the channel grid select frequency search for the search method The symbol rate is specified by the satellite provider and normally does not need to be changed Managing stations Search for update stations handling of new and no longer found stations The number of new stations found is displayed after the automatic search update has been completed D OK List of new stations found Newly found stations WDR K ln EinsFestival MDR S ANHALT Test R ARD Online Kanal ARD TEST 2 ARD TEST 1 MDR TH RINGEN OU as Gil acy a ed g
14. X Red button Starts Delete station a v mark several stations if needed OK to execute the delete Move station Change order im Not possible for MHEG 5 stations i Stationscan only be resorted within their signal source block Ce Ce g Yellow button Starts Move station a v mark several stations if needed OK to end marking a e Selection insert position from which the marked stations are to be inserted OK to execute the move Rename station w Not possible for MHEG 5 stations ug DVBstations for which the station name is also broadcast cannot be renamed In this case the Rename function is hidden Ce 7 Blue button Starts Rename station Under the 1st letter of the name you will see a line indi cating the current input position A gt Input position one character to the right also for D space km d Input position one character to the left deletes the character COG Enter the letters one after another with the numeric buttons on the remote control Like using a mobile phone keypad press a numeric button until the desired character appears The available letters are printed respectively on the buttons Different special characters can be selected with button 1 O Re Green button Switch upper lower case letters d OK to save new name Restore stations Stations which have been deleted from the station list can be restored DRDS
15. an externally connected recorder then the DVB tuner is used and the TV device takes over control of the recorder Then the station on the TV set is locked during the timer recording It is not possible to switch over to another DVB station Recorder without Digital Link Plus If the programmed timer cannot be transmitted to the external recorder no Digital Link Plus but supports Digital Link Loewe own system the TV receiver is always used Digital Link must be switched on on the recorder Read the operating instructions of your Loewe recorder In addition use only Euro AV cables for the connection between TV set and recorder Analogue and digital stations You can control the recording from the TV set The recorder must be set manually to the AV input to which the TV device is connected Then the station on the TV set is locked during the timer recording It is not possible to switch over to another station Copy protection Copy protected programs will not be output on the EURO AV sockets for legal reasons 49 GB Operating additional equipment PhotoViewer You can view photos in the standard JPEG format stored on a USB stick or a memory card in a card reader You can also collect photos in a slide show Connecting mg CertainUSB memory media may not be supported by this set under some circumstances Plug a card reader via a USB cable or a USB stick into the USB port on the TV set see page 5 Use a US
16. as full picture gt gt or P next photo da or P previous photo END Show hide photo information Yellow button Zoom photo Enlargement factors x2 x4 and x8 are possible Press the button several times The 4th press returns you to the original size Select photo section in zoom mode with a 4 gt Exit the zoom mode to the photo overview with OK or the STOP button d gt Rotate picture by 90 degrees to the left right me Photosdisplayed in a slide show can only be rotated in the Pause mode for viewing OK or STOP button Back to the Photo Overview Operating additional equipment Open folder m Folders will only be displayed if they were created on the memory card USB stick a wv 4 gt Mark a folder in the photo overview OK Open folder The photos in this folder are displayed MENUS INFO Marking photos for slide show Mark the photos that you want to display in a slide show D a p v 4 Navigate to a photo MENUJE INFO OOG E Blue button marks photo for slide show Starting a slide show mg Nophotos marked All photos of the folder that was just opened will be displayed im Photos marked Only marked photos will be displayed Gp Play button Start continue slide show OR OK calls the photo overview GED Pause button Pause continue the slide show Es Yellow button Zoom picture only in pause mode gt 4 gt Rotate picture to left right in 90 i
17. can tempo rarily ban commercials or programme sections to the PIP picture in this way The PIP picture becomes the TV picture again PIP off 29 Electronic Programme Guide Electronic Programme Guide EPG EPG stands for Electronic Programme Guide and provides you with on screen programme details With the system as with a printed pro gramme guide you can learn about the current programme In addition programmes can be sorted according to certain topics memorised and also recordings can be programmed Starting and ending EPG EPG Switching EPG on off im Awizard will guide you through the necessary presettings the first time you start the EPG If you have analogue reception you enter the data capture for analogue stations after that see next page m For TV sets with MHEG 5 software EPG is only possible for DVB T stations now cl soon 17 00 18 00 19 00 2 Pall SS 15 57 16 59 arte Charmed Zauberhafte Hexen 16 00 16 10 Das Erste Tagesschau 16 00 16 10 ZDF heute in Europa j 16 00 16 15 WDR K ln WDR aktuell 16 00 16 05 Bayerisches Rundschau 16 00 16 30 hr fernsehen Schlemmerreise Spanien 16 00 16 15 MDR FERNS Hier ab vier 16 00 16 30 NDR FS HH Tipps und Trends Der Verbraucher 16 00 16 05 SWR Fernse Baden W rttemberg aktuell Charmed Zauberhafte Hexen D0 A EA The display of the programme guide is divided into two branches The programme list bottom is influenced by certain s
18. data and selection possibilities which refer to the TV speakers in the course of the sound components wizard are only relevant when TV speakers are connected TV speakers No TV speakers are included in the scope of delivery for the Individual Compose TV set Two speakers min 4 ohm min 20 W sinus can be connected via the speaker connections screw terminals of the TV set The Loewe Stereospeaker Compose available as an accessory are ideal for this These can be fixed directly to the TV set or separately to the wall When fixing the speakers directly to the TV set the side speaker connections exclusively for Stereospeaker Compose behind the trim are used In the case of separate wall assembly the speakers are con nected to the screw terminals See installation instructions Stereospeaker Compose Speakers must never be connected simultaneously to the side connections and to the screw terminals Connecting speakers to the screw terminals To connect the speakers switch the TV set off at the mains switch and pull out the mains plug You have connected and laid out the connecting cables to the speakers Remove the rubber band fixed as a transport protection see figure Turn the 4 screw terminals anti clockwise about 2 or 3 turns This frees the connection openings for the connecting cables of the speakers Do not loosen the screw terminals more than necessary They could fall down and get lost Make sure no b
19. digital multi channel sound For playback of 5 audio channels the surround sound is reinforced by the deepest frequencies from the subwoofer channel SUB 5 1 reproduction 5 audio channels and 1 subwoofer All 5 audio channels are reproduced with the full frequency range from 20 20 000 hertz and generate the original theatre effect The Dolby Digital Decoder also decodes dts MPEG and the analogue Dolby Pro Logic and Dolby Pro Logic II signals regardless of whether the audio signal is transmitted by an external device or received by the TV set DVDs or CDs with PCM coded audio format are also decoded by the Dolby Digital Decoder The CD DVD player must be connected via a coaxial digital connection to the digital input AUDIO DIGITAL IN for this see page 47 The audio signals decoded by the Dolby Digital Decoder are output via the AUDIO LINK interface You can connect a speaker system such as the Loewe Individual Sound see page 42 or active speakers see page 43 to the AUDIO LINK interface and configure these with the sound components wizard Settings for speaker systems and active speakers which are connected via the AUDIO LINK interface to the Dolby Digital Decoder of the TV set e Register speaker system or active speaker Setting of the lower limit frequency of the speakers Setting of the distances between listener and speakers Level settings for the speakers Setting of the phase position for the subwoofer channel All
20. e Floor Stand 5 MU 40 46 Compose e Screen Lift Plus 1 Individual 40 Compose Full HD e Wall holder WM54 delivery status e Screen Wall Mount 21 e Table Stand 40 46 Compose e Center Floor Stand Compose e Screen Floor Stand MU Center Floor Stand Screen Floor Stand MU Floor Stand 5 MU e Floor Stand 5 MU pO pene e Screen Lift Plus i Screen Lift Plus C S we e Bas e so S S amp SO ch Y So NO Oe D S S Q A WW g R ZF SSCL KS Ny amp a Only in conjunction with appropriate adapters that are sold separately aS ss ge se 2 Only in conjunction with Loewe Individual Sound Projector d gt S S AF 59 Glossary 0 9 24p movie display Modern movie makers produce movies with 24 full pictures per second 24p conventional TV sets and most DVDs show 50 half pictures per second To play the movie the original number of pictures is doubled and the film sped up This is optimal for sports broadcasts but for quieter movies it distorts the picture quality A Active antenna An antenna with its own power supply or amplification that can improve reception in areas with poor reception AV socket Socket for audio and video signals AV sources Audio video source AVS Audio video sockets on the TV set cinch and Mini DIN B Band Designation for a frequency range C CA module The Conditional Access Module contains the coding system and compares the transmitted code with the one on the Smart Card If
21. menu PIP picture in picture Info PLAY menu bar MENU hide menu P P PLAY Next chapter STOP Select station up down MENU select set Yellow button Zoom Blue button DISC short Set marker long Marker search Playback PLAY Press short next chapter Press long search forward PAUSE Press short slow motion forward Stop 53 Operating additional equipment Rotating the TV set Your TV set has a connection for a rotating stand control If the set is mounted on a motorised Loewe stand you can use the remote control to adjust it to your seating location accordingly im A motor unit is connected im In normal TV mode without other displays D e OF 4 gt Rotate the TV set S ch Do not place any objects in the rotation range of the TV set that could obstruct the rotation or that could be knocked over by the rotation movement Setting the range of rotation You can specify the rotation range of the TV device maximum 40 degrees by setting the maximum right and left stop position Call TV menu d gt Select Settings v go to the menu line below 4 gt Select Miscellaneous v go to the menu line below 4 gt Select Rotate TV v go to the menu line below 4 gt Select Basic adjustment OK calls the basic adjustment Rotate TV Basic adjustment right A JEE ox Proceed E N gt Basic adjustment right Turn your TV set as far to the right as the installation positi
22. mode TV set receives EPG data or timer recording active Switching the set on with the remote control Press the on off button O or numeric buttons 0 99 or TV button or OK button station list is called Switching the set off with the remote control Press the on off button mg Beforeswitching off the set with the mains switch we recommend you to switch it to standby mode Switch on in Radio mode Press R on the TV control unit S Or RADIO button on the remote control radio mode see page 36 First installation wizard First installation after switching on for the first time This wizard starts automatically after the set is switched on for the first time however it can also be called later manually in the TV index see Repeat initial installation on page 15 Initial installation Language Sprache D Kieli Language GB 3 Jesik Langue LF Jazyk Lingua l Lisan Idioma Spr k Taal Sprog Jazyk Idioma Awooa A3bIK Jezyk Sprak Nyelv The first step with the wizard starts when selecting the language for the user prompts From this point on follow the instructions on your TV set Brief explanation of button functions Press the ring up down left right to move the cursor and to select settings By pressing the OK button a setting is confirmed and you will go to the next step With the yellow button you can select or remove the indi vidual items
23. phone keypad 14 Move picture vertically 22 Muting 20 N New devices modifications 37 Numeric buttons 14 15 18 0 On screen displays 16 Overview diagram 16 17 P Page selection 32 Parental lock 16 59 PCIN 39 Personal text pages 22 33 PhotoViewer 50 Picture 21 Picture adjustment 21 Picture format 21 22 16 9 22 4 3 22 Cinema 22 PALplus 22 Panorama 22 Zoom 22 Picture in Picture 28 PIP 28 Programme info 22 R RADIO button 11 52 Radio menu 17 36 Radio mode 11 36 REC button 52 Recording 48 Recording wizard 48 Remote control 3 10 52 Repeat initial installation 11 Reset picture sound 21 Rotating the TV set 54 RS 232C interface 47 S Safety 8 9 Satellite system 12 Scope of delivery 6 Search wizard 24 Secret code 59 Select station 18 Service 64 Set current time date 16 Settings 16 Signal type 37 38 Slide show 51 Small PIP 28 29 Smart Card 34 Software update 35 Sound 20 Sound components wizard 41 Sound mode 20 Sound off 20 Split screen 28 29 Standard PIP 28 Standby mode 11 Station list 18 Status display 23 Switching off 11 Switching on 11 Switching voltage 16 Switch on volume 20 T Teletext 32 Teletext functions 22 Teletext subtitles 22 Time 22 Timer data 48 Date 48 Recorder 48 Recording time 48 Recording type 48 VPS 48 Timer functions 16 Timer list 49 Timer recordings 48 TOP 32 TOP table 32 TV base software 35 TV button 10 52 TV menu 16 TV s
24. position v go to the menu line below 4 gt Select yes END Close the menu If the TV set is switched off with the on off key on the remote control or with the switch integrated in the display then it will turn to the defined switch off position When it is switched back on it returns to the position last set Troubleshooting Problem Possible cause All menus are displayed in the wrong language The menu language was set incorrectly In the TV menu Connections cannot be called displayed in grey A timer recording is in progress a The Digital Link function is not activated or not possible in the recorder b EURO AV cable is not connected c Recorder is not logged in The control functions of the Loewe Recorder and the Timer are not working or are not working properly a The device is not logged in to the connection wizard or is connected differently from shown in the connection diagram General problems when connecting external devices via an AV input b The AV standard is set incorrectly c The signal type is set incorrectly The connection of a decoder does not function or does not function properly a The signal is not decoded because the correct decoder stations have not been selected in the connection wizard b In decoder mode the sound is missing because the wrong decoder sound has been assigned in the connection wizard Remedy Set the menu language Press the INFO button in TV
25. programming ov lt gt 0 0 pa 7 For your safety For your own safety and to prevent unnecessary damage to your device read and comply with the following safety instructions Proper use and environmental conditions This TV set is designed exclusively for reception and reproduction of video and audio signals and is designed for living rooms or office facilities and should not be operated in rooms with high humidity such as a bathroom or sauna or where there is a high concentration of dust e g workshops The manufacturer s warranty is only valid for use in the specified permissible environment If the set is used outdoors ensure that it is protected against moisture rain splashing water or dew High humidity and dust concentrations cause leak currents in the device which can cause a shock hazard if the device is touched or a fire If you have brought the set into a warm environment from the cold then wait for about 1 hour before Switching it on to avoid formation of condensation Do not place any objects filled with liquid or burning candles on the device Protect the set against dripping and splashing water Never place the TV set in a position where it is exposed to vibrations This can lead to material over load Transporting Only transport the device in vertical position Grasp the device on the upper and lower edges of the housing Never set the TV down on the protruding control unit on the bott
26. they match the appropriate stations or programmes are decoded Cinch cable Cable for transmitting audio or video CI slot See Common Interface Common Interface The Common Interface CI slot is a standardised interface By inserting suitable decoding modules CA modules and a Smart Card coded digital programmes can be used Component IN Connection by which the video signal is transmitted via three separate cinch connections It is made up of the brightness signal Y and the colour difference signals Pb and Pr YPbPr is the original analogue version of the digital YCbCr with which among other things video data stored on the DVD and transmitted by satellite cable or antenna in DVB are colour coded Conditional Access Module See CA module D Decoder Analogue coded TV signals are passed through a decoder and made visible again Digital Link System for controlling recorders for video and DVD recorders from Loewe via the Euro AV sockets of the Loewe TV set with concealed setup Controlling the recorder for timer recordings Digital Link HD System for controlling devices via the HDMI connection of the Loewe TV set in the case of concealed installation Digital Link Plus System for controlling recorders according to protocol 50 For analogue stations the station and timer data are transmitted via the EURO AV socket to the recorder The timer recording is executed exclusively by the recorder There is a different design
27. 00 06 Email somara wanadoopro ma CN CableCom AS Gneisveien 12 3221 Sandefjord Norge Tel 47 33 48 33 48 Fax 47 33 44 60 44 Email soren cablecom no NZ International Dynamics NZ Pty Ltd PO Box 109 317 Newmarket Auckland New Zealand Tel 64 9 379 0179 Fax 64 9 379 0279 Email enquiries internationaldynamics CO NZ lt P Videoacustica Comercio e Representacoes de Equipamentos Electronicos S A Estrada Circunvalacao Quinta do Paizinho Arm 5 2795 632 Carnaxide Portugal Tel 351 2 14241770 Fax 351 2 1418 80 93 Email office videoacustica pt DSV TRADING SA Plac Kaszubski 8 81 350 Gdynia Polska Tel 48 58 661 28 00 Fax 48 58 661 44 70 Email market dsv com pl Service Center Loewe ul Verkhnaya Maslovka d 29 125083 Moscow Poccua Tel 7 495 612 50 43 Fax 7 495 612 47 10 Email service atc ru Kjaerulff 1 AB Ridbanegatan 4 Box 9076 21377 Malmo Sverige Tel 46 4 06 79 74 00 Fax 46 4 06 79 7401 Email Sweden kjaerulff1 com Sk BaSys Czech amp Slovak s r o Stara Vajnorska 17 A 831 04 Bratislava Slovakia Tel 421 2 49 10 66 18 Fax 421 2 49 10 66 33 Email loewe basys sk Jadran Trgovsko Podjetje Partizanska cesta 69 6210 Sezana Slovenija Tel 386 57 31 04 40 Fax 386 57 31 04 42 Email milos zvanut jadran si Enkay Elektronik Servis Mudurlugu Alemdag Cad Site Yolu No 10 Umraniye Istanbul Turkiye Tel 90 216 634 44 44 Fax
28. 0s Set sound mode 25scisstanditvnsiondasxthantendbsaddodsniedetianse page 20 E E Set picture format 29 FS i rn en 1 E Select station directly S MENU Enter numbers or letters cccceeeeceseeereeeee page 18 Li E EE page 19 EE E Assist menu on off ei e PIP on off picture in picture eee eeeteeeeetteeeee page 28 page 30 scsscnntresnonmcdondanes Electronic Programme Guide on off C EPG ASSIST PIP e e A seeno ee page 15 NS SZ etic sata oc carta acer noreneeatatassngedcasatsanesvse Teletext on off TEXT MENU END INFO T MENU info texts EE page 14 VEEEISC aere Menu on off a Do Status display OnO E page 23 fiv P MENU Hide men page 14 KEE siet VAN volume louder quieter Ek e PaP select station DOG E page 18 Page EE PIP Position of the PIP picture NGI E E MENU select set X SOR Mt E page 18 MENU confini cale esserti page 14 Green button E ee ge 22 EEE Teletext functions Yellow button Previous statton page 22 Red button ce 5 Ce Blue button 8 Programme info omdeft page 22 oee EE Call DR archive bt S5 ZOO M Wm ag gt Digi l 2 Digital Recorder Jump back Rewind Replay Cx e EES KEE ee in the wizard Back Ce B c l Digital Recorder Play Set bookmark SW D F Direct recording Digital Recorder Stop live picture Digital Recorder Freeze picture Pause start offset TV viewing Radio only for DVB reception provided
29. 233 32961 022 Operating Instructions TV m Individual 46 Compose Full HD m Individual 40 Compose Full HD LOEWE Contents Remote Control TV Functions cscceseeeeeseeeeseeeseesseseeeseesneeseeenenensees 3 Control unit front side of the device c ceececcesseseeeseeeeseeseeeeeseeeeneenens 4 Connections rear Side Of the device cecceececeeseeeeesesseseeeseeeeeeseeeeeeeens 5 E 6 EEN 6 About this operating Mandl seinscinasncedachearsantbin crs ege eege 6 Teet tal VU eA sa sca aaeeee as ss ctv E eabnas teense apatite taewgetaateaes 6 Ee EE 6 Acknowledgements eege ciesmiiaurmesadedrestinsasetthcinsai tities rroen ni E iE Nee 6 Operating convenience with wans 7 UE ee 7 mo CIS ay and TV INGEN EE 7 FOR YOUN salo eee 8 Environmental protection ssssssssssssssssrnnsnnsrnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnannnae 9 Initial installati n 10 anO e Eeer 10 Removing the protective Io 10 Preparing the remote control unt ke 10 Connecino THE T SEU rn N OE EE 10 TING TS set OMOT ege cer eapaideunes cr esise rerne eN EANET 11 First installation Wizard seereis enen ESEE En E AEAEE ERE REER 11 Positioning aligning DVB T amanna eraser ea E E E 13 Operating convenience ssssssssussnssunsnnsnnnnnsnunnnnnnnnnnnnunnnnnnnnnnnnnnnnnnnnnnne 14 General information ON Menu operaton 14 TPR ere el EN 14 The index in the KEE 15 E EE 15 TV menu Overview CIAGIAM ENEE ENEE 16 Radio menu Overview di
30. 90 216 634 39 88 Email mhatipog enkaygroup com ZA Videonix Pty Ltd P O Box 31952 Kyalami 1684 Republic of South Africa Tel 27 1 14 66 47 00 Fax 27 1 1466 42 85 Email mail loewe co za by Loewe Opta 070914
31. B extension cable available from your dealer for the USB stick if the USB socket is difficult to access e g wall mounting or the USB stick is too big to be plugged in To mount the cover break out the cable opening in the cover flap Starting the PhotoViewer me Nophotos can be displayed which are available in progressive JPEG format A memory card or the USB stick should contain data in standard JPEG format with the file extension jpog PhotoViewer mode starts automatically when a memory card is inserted in the card reader or when a USB stick is inserted You see the first page of the photo overview see right column If several memory media are available you can select the desired me dium in the PhotoViewer menu with the Select memory medium item see page 51 If a memory medium is already connected to a USB socket of the TV set start the PhotoViewer as follows Call the Assist menu a v Mark PhotoViewer OK continue If only one memory medium is available the PhotoViewer is started If several media are available select with 4 gt Medium and then start with OK start PhotoViewer Ending the PhotoViewer Pull out the used memory medium Or END button when photo list is displayed Or Press TV or RADIO button 50 Viewing photos CD Ca Lei Ce om O Ca im The photo overview is displayed a wv 4 gt Mark a photo page with P P if necessary OK Display
32. Green button Starts Restore stations 3sat Das Erste KIKA Das Vierte ZDF gt RTL Television ZDFinfokanal 9Live ZDFdokukanal WDR K ln ZDFinfokanal VOX Eurosport ProSieben NO NVAYT Super RTL RTL n tv Phoenix DSF BRalpha RTL2 NDR FS HH KABEL1 C a ed gt Select station OK station is restored The restored station is sorted in according to its signal source at the end of the respective signal block Managing stations Put together change favourites lists Each favourites list can contain up to 99 stations You can put together the favourites lists to suit your requirements e g topic lists Other persons using this TV set can create their own favourites lists The favourites lists also have the advantage that the stations of different signal sources can be stored in the order you wish me Change favourites can also be called via the favourites list page 19 Call TV menu d gt Select Settings v go to the menu line below d gt Select Stations v go to the menu line below d gt Mark Select change favourites OK calls list of all stations and last active favourites list ox 1 Das Erste 2 ZDF 3 WDR K ln 4 Bayrisches FS 1 Das Erste Vay AD 3 WDR K ln 4 Bayrisches FS 5 hr fernsehen 6 Phoenix 7 BR alpha 8 3sat 9 EinsExtra 10 EinsFestival 11 SAT 1 12 RTL 5 hr fernsehen 6 Phoenix 7 BR alpha 8 3sat 9 EinsExtra 10 EinsFestival 11 SAT 1 12 RTL oolli oo
33. HEG 5 software im At the moment only available in United Kingdom and Ireland im Digital teletext is not available when DVB subtitles are being displayed The operation of these menus depends on the particular provider Normally after a station is changed the provider broadcasting the digital teletext makes an introductory offer for this service on the screen via menu selection Follow these notes If no message appears telling you how to switch to digital teletext after switching to another station press the TEXT key If a selection for DVB subtitles is available this item must be hidden before Depending on the provider s respective offer you can use the a 4 gt buttons and the OK button the coloured keys the END TEXT button and sometimes even the numeric buttons If you want to close the digital teletext just select a dif ferent station using the P P buttons or follow the menu prompts on the screen 33 DVB Conditional Access Module CA module In order to receive coded digital stations a Conditional Access Module CA module and a Smart Card must be inserted in the Cl slot of your TV set see page 5 The CA module and the Smart Card are not part of the TV set s scope of delivery They are usually available from your dealer Loewe provides no guarantee for the functioning of the CA module Inserting the Smart Card into the CA module Push the Smart Card into the CA module as far as it goes so that the side
34. Mono 2 sound Stereo DOO Digital dts MPEG O0 PLII HEEEGOGOG Transmitted audio signal Mono audio transmission analogue Two sound transmission Sound1 Sound2 analogue Stereo sound transmission analogue or digital PCM Dolby Digital sound transmission DD dts sound transmission MPEG sound transmission Dolby Pro Logic Il sound transmission Transmitted audio channels DD dts 1 0 mono DD dts MPEG 2 0 DD dts 3 0 DD dts 4 0 DD dts 5 0 DD dts 2 1 DD dts 3 1 DD dts 4 1 DD dts 5 1 Selected listening mode Play centre sound or mono left right Play front sound L R stereo Play front and centre sound Play front and surround sound Play front surround and centre sound m fthe number of speakers appears in brackets the sound of missing speakers is transmitted by the exist ing speakers virtual The Dolby Virtual speaker VS mode developed by Dolby is activated for the virtual sound reproduction Additional selection possibilities for DVB stations In the status display additional selection possibilities can be offered for specific programmes depending on the DVB programme provider gt C m Thecoloured buttons do not work as described below for TV sets with MHEG 5 software but they operate as described on page 33 Digital Teletext m f during the status display you press one of the coloured buttons or the TEXT button then the associated selection
35. S line 1 digital stations via satellite DVB S line 2 digital stations via satellite You can state whether coded stations are to be searched for in the search update Select yes then coded stations are also searched for However these stations can only be received in connection with a CA module and the appropriate Smart Card Handling of the CA module is described on page 34 If you are using an active antenna then select yes 5V for the antenna power supply The conventional settings will be derived from the selection of set location Only change this if you know other symbol rates and modulation types or if you have to specify the network ID for your cable network information available from your cable network provider If you want to run the station search independently of the channel grid select frequency search for the search method Select which satellite s you receive from a list For more than one satellite select the type of your changeover switch or communal satellite system additionally Ask your dealer in this regard Specify here whether the high band of the selected satellite is to be searched in addition to the low band LNC frequencies Low Band High Band Symbol rates Favoured Signal source Start search Connecting additional devices Normally you do not need to change the values for high and low band unless the LNC LNB of your satellite system uses a different oscillator frequency imp
36. SD HDMI SD 480 576i Input Tuner digital HDMI1 DVI HDMI2 DV HD analogue Signal type RGB HD video mode e g 1920x1080 1280x720 Component HD video modes e g 1920x1080 1280x720 Input COMP IN PC IN HD digital Signal type DVB HD HDMI HD Input Tuner digital HDMI1 DVI HDMI2 DV PC Signal type RGB PC modes e g 800x600 1024x768 1280x1024 1360x768 Input PC IN PhotoViewer Input USB Signal strength strength of the received antenna signal Signal quality quality of the incoming antenna signal Smart Card The Smart Card is an electronic chip card issued by the respec tive programme provider or by the certification free Pay TV operators It contains the code which is decoded by the CA module Static contrast ratio Describes the difference between the brightest and darkest picture display Stereo Dual channel audio Switching voltage Video devices specify this voltage to switch the TV device to playback Symbol rate describes the transmission speed for data transmission 62 T Terrestrial In data transmission a wireless transmission that does not use satellites as intermediate station is referred to as terrestrial TFT Thin Film Transistor One widely distributed application is control of liquid crystal flat screens for which a signal transistor is used for each pixel This design of display is also referred to as active matrix however it is frequently also referred to as TFT
37. V mode see page 18 and 19 Setting the volume iK Ss Setting the sound mode V V Volume louder quieter Other sound settings are the same as for the volume setting in TV mode see page 20 Call Sound mode Other settings as for TV mode see page 20 Switching the screen on off X Red button Switch off the screen The LED display on the set changes from green to orange Switch on the screen with the remote control Red button OK button or RADIO button Switch on the screen on the TV set Press R on the TV set operating ring Radio menu In the Radio menu you can set the sound search for and store radio stations automatically or manually change stations and set switch off alarm functions The settings are made as described in TV mode Call radio menu m Radio mode switched on if not press the RADIO button Call the Radio menu Radio menu lt gt Sound INFOR va Switch off radio mode TV button on the remote control or R on the operating ring on the TV set EPG Electronic Programme Guide radio For the DVB radio stations you can also use an electronic program guide if the station that is currently active supplies data Starting and ending EPG mg Radio mode switched on if not press the RADIO button EPG Switching EPG on off m TheEPG functions in radio mode are the same as in TV mode Read from page 30 onwards for further information Operating
38. a Digital DVB C station via cable Digital DVB S station via satellite Coded station Select video source im Please ensure that the appropriate devices have also been registered with the device connection wizard see page 37 Via AV selection Via station list Call AV selection AV selection DVD oxo 4 gt Select desired device or connection OK to switch over A signal from the selected video source should now be visible me In normal TV mode without other displays OK call the station list If the favourites list is displayed switch to the station list first In numerical sorting the connections or devices are always at the beginning of the list In alphabetic sorting the connections or devices are sorted in alphabetically COMP IN 5 hr fernsehen HDMI1 DVI 6 Phoenix HDMI2 DVI 7 BR alpha VGA 8 3sat AVS 9 EinsExtra DND 10 EinsFestival VCR 11 EinsPlus gi leglde 12 ZDFinfokanal 1 Das Erste 13 ZDFdokukanal 2 ZDF 14 ZDFtheaterkan 3 WDR K ln 15 arte 4 Bayrisches FS 16 DAS VIERTE SoFo kokoa RHRRRRRRRRRSR 0 90 O A ed gt Select connection device OK to switch over Daily operation Adjusting the sound Switching sound off on Sound off Sound on Press button again or set volume V Setting the volume V V volume louder quieter The volume bar will be shown briefly if no other menu is displayed Setting the sound mode Call Sound mode Soun
39. additional equipment Device connection wizard Connecting additional devices to the TV set The device connection wizard serves to connect new devices to the TV set or make wiring changes im Newdevices should not be connected until they have been registered in the connection wizard Call TV menu gt 4 gt Select Connections E v go to the menu line below d gt Select New devices modifications OK calls the wizard END END It is possible to run the wizard only partially at any time You have to confirm changes on a page with OK Connection wizard Connect the satellite dishes or cable terrestrial antennas of your AV equipment recorder decoder to the TV set according to the enclosed operating manual The connection wizard assists you when you connect your equipment to the TV set via the AV sockets AV1 AV2 and AVS or via the SD HD COMPONENT IN or HDMI1 2 DVI socket Proceed Follow the instructions on the TV set The following illustrations provide an overview of the possible options Connection Connection wizard Now the TV set assumes that you have connected the following equipment diagram 0 EZ COMP IN HDMI1 HDMI2 G Proceed The connection diagram shows the devices that are cur rently configured DVD player on AV1 and DVD recorder on AV2 are factory pre sets AV equipment selection Connection wizard Specify all new AV devices to be connected and all connection changes to the existin
40. agram EEN 17 Other Menus Overview diagram e eccseceseeceeeeseeeeeeeeceeeeeseteesteeteeetenseeees 17 Daily operati i sisonu eai ao aaa aeai 18 SEELEN 18 Selget VideO E 19 Adung ME TOUN seperi p e E E 20 e e E E E degt 21 Operation without remote control 0 0 cceccesecseseeetseeesetsssesesessetesseseesees 21 ioi E e 22 Managing EC 24 TS le 24 Put together change favourites jete 27 Picture in PICTUIC ccscccesseesseeseresseneseeeessersessenseseesesaeeseaneseansteansteneetoas 28 A ug UC ON EE 28 Configure Picture in Picture PIP mode cccccsscesscscsesecsetetecetssseeetasseeees 29 2 Electronic Programme Guide cc ccccescseeeceeeceeeeeeseeeseeeeeeeeeseeeeseeeaees 30 Electronic Programme Guide D RE 30 EDT E E a E E EEE A EE Si E GE ER EE tee 32 POST TCT eebe 33 Digital Teletext WIFE G 5 E 33 A 34 Conditional Access Module CA Module ceceeeeeccecececeereecerseecenreesetreesens 34 EECH eEEeEEeie 35 LTE 36 Eltere 36 EPG Electronic Programme Guide Vuado 36 Operating additional equipMent ccsccssecssessecseeesseesseeeseesseeesees 37 Device connection Wiza A sessirnar as af Connecting devices to the HDMI DVI connections and playback 6 39 Connecting devices to the PC IN connection and plavback 39 Connecting devices to the Component IN connection and playback 40 Sound COMO OMENS Wiza seana E AE 41 Pepea Ka ee 41 Speaker system Loewe Individual
41. amplifier is already set in the sound components wizard see page 46 Feed the digital audio signal of the AUDIO DIGITAL OUT socket on the TV set to the external amplifier Connecting devices to the Component IN connection and playback DVD players recorders with component video connections can also be connected to the Cb Pb Cr Pr Y sockets SD HD COMPONENT of the TV set instead of to the EURO AV sockets The connecting cable with three cinch plugs transmits the picture in formation in better quality than is transmitted by a EURO AV cable You need an additional cable for audio transmission HIGH DEFINITION TELEVISION Connecting the device Connect the component video outputs of the external device via a triple cinch cable to the Cb Pb Cr Pr Y sockets on the TV set Connect the analogue audio outputs of the external device to the AUDIO IN1 L R sockets on the TV set The sound is played over the speakers of the TV set only with connected TV speakers or over a speaker system Alternatively connect the digital audio output of the exter nal device to the AUDIO DIGITAL IN socket of the TV set Call TV menu em 4 gt Select Connections SI v go to the menu line below d BE SS 4 gt Select New devices modifications OK calls the wizard OK Go to the AV equipment selection menu a v Select device at COMP IN CHO P Yellow button Activate COMP IN In an analogue audio connection the sound i
42. are cable ends can get inside the device when con necting Avoid short circuits between the individual screw terminals and between the screw terminal and the support plate Push the connecting cables max 1 5mm of the speakers under the respective same coloured screw terminal red to red black to black See also the printed connection designations of the speakers right Right and left Left and the characters equal red and equal black see figure Make sure that the sheaths of the connecting cables are not clamped accidentally as well Tighten the screw terminals clockwise ee een Au mmm ee ae gt Attach connection cable Remove transport protection Operating additional equipment Speaker system Loewe Individual Sound on the Dolby Digital Decoder of the TV set Setup The arrangement of speakers and TV set can look like the illustration below The front and surround speakers should be installed symmetrically to the TV set and to your sitting position You can place the subwoofer anywhere on the floor We recommend placing it in front asymmetrically next to the TV set If a centre speaker is used it should be placed centrally below the TV set For the settings in the sound components wizard enter the distances of the centre speaker and the front and surround speakers to your sitting position This guarantees a natural spatial image of the sound im fyou have connected speakers di
43. atellite antenna is referred to as an LNB Low Noise Block Converter It is mounted in the focal point of a parabolic antenna The designation LNC Low Noise Converter indicates that conversion to lower intermediate frequency takes place The supplemental block in the LNB refers to the fact that a whole frequency range a block is converted in each case M MHEG 5 Digital teletext standard of the Multimedia and Hypermedia Expert Group At the moment only available in United Kingdom and Ireland Modulator Transmitter in the video or DVD recorder so that the devices can receive signals via the tuner of the TV device Mono Single channel audio MPEG Digital compression process for video N Network ID NID refers to the so called programme ID number also known as network ID a number between 0O and 8191 This specification is necessary in specific cable networks of some countries Then only DVB signals of this station network are searched for NICAM Audio standard Is used in Denmark England France Sweden and Spain NTSC American picture standard D Page Catching For Teletext refers to going to and calling a page number PAL European picture standard PCM Pulse Code Modulation for digital audio Picture in Picture see PIP PIP Picture in Picture a function which displays two pictures on the screen Pixel Refers to the smallest unit of a digital grid graphic and its repre sentation on a screen with gri
44. ation with different manufacturers 60 Dolby Digital Digital multi channel audio The digital standard for high quality home movie systems The individual channels are broadcast sepa rately in this standard The three front channels right left and centre the two surround channels right and left and the external subwoofer channels are called a 5 1 signal Another term for Dolby Digital is AC3 Dolby Pro Logic Analogue multi channel audio Converts a Dolby coded stereo signal into a surround sound This usually contains four channels front left centre front right surround channel A special subwoofer channel is not generated in this method Dolby Pro Logic Il Analog multi channel audio Dolby Pro Logic Il is a fur ther development of Dolby Pro Logic This method generates a 6 channel Spatial sound from a stereo or Pro Logic signal front left centre front right surround left surround right subwoofer Dolby Surround Analogue multi channel audio system that brings four au dio channels down to two audio tracks with the aid of a matrix coding Dolby Virtual Speaker The Dolby Virtual Speaker technology simulates the surround playback of a real 5 1 channel playback with only two speakers DTS Digital Theater Systems Digital multi channel audio DVB C S T Digital Video Broadcasting stands for digital television Technical DVB is the standardised process for transmitting digital content television radio multi channe
45. below 4 gt Select Miscellaneous v go to the menu line below 4 gt SelecCA module xxx xxx Corresponds to the CA module provider OK to call information The content of this menu depends on the provider of the CA module Removing the CA module m Switch off the TV set s mains switch Remove the cover from the rear of the set Press in the ejector button on the appropriate module drawer the module is released Remove the module from the set Replace the cover DVB Software update TV base software and DVB software You can update your TV s base and DVB software The latest software versions are broadcast by satellite only Astral at the moment or can be installed in your set with a USB stick Please contact your dealer for a software update via USB stick m Location of TV set UK or IRL With the DVB software update either MHEG 5 or DVBi3 is updated depending on the selection during the first installation After this update it is not possible any longer to switch between MHEG 5 or DVBi3 software via first installation im MHEG 5 software update only available via USB stick and DVB T Automatic search for new software via satellite The set overnight automatically determines whether a new software ver sion is available via satellite However the TV set must remain in standby mode for this do not switch off the set with the mains switch If a new software version has been found the set informs you wit
46. can be displayed temporarily by pressing the INFO button INFO 1 TVmenu sid menu Settings Kas Eze An INFO icon at the bottom right above the menu bar also tells you that an info text is available Permanently display or hide the automatic info display Once you have become familiar with how to operate the TV set you can switch off the automatic info display me normal TV mode without other displays Call TV menu D d gt Select Settings v go to the menu line below 4 gt Select Miscellaneous v go to the menu line below d gt Select On screen displays v go to the menu line below 4 gt Select Automatic info se go to the menu line below yes no Operating convenience The index in the TV set You can start all wizards and many operating functions directly from this point The complete function scope of the TV set can thus be easily understood Alphabetic sorting is preceded by the items Language Integrated features and Repeat initial installation Call index im In normal TV mode without other displays Call Index You will see an info text for the highlighted keyword in the info display If MHEG 5 is active call the status display with INFO and press INFO again for index lt gt M Language Integrated features Repeat initial installation Access code ASSIST Automatic dimmer Automatic station programming 0 0 If an OK symbol appears in the marked line this
47. d 59 Supervision Do not allow children to use the TV set without supervision or to play in the immediate vicinity of the TV set The set could tip over be pushed off or pulled down from the stand surface and injure someone Do not allow the switched on TV set to run unattended Volume Loud music can lead to ear damage Avoid extreme volume especially over long periods and when using headphones Cleaning Clean the TV set the screen and the remote control unit with a soft moist and clean cloth only without any aggressive or scouring cleaning agents The front screen may only be removed by your dealer even if it is soiled on the inside Thunder storms Pull out the mains plug and all connected antenna cables from the TV set in a thunderstorm Overvoltage caused by lightning can damage the set via the antenna system as well as via the mains The mains plug and all connected antenna cables should also be pulled out during long pe riods of absence Note on the LCD screen The TV set you have purchased with LCD screen satisfies the most rigor ous quality requirements and has been inspected relative to pixel errors In spite of the utmost care in manufacturing the display for technical reasons the possibility that some pixels will have defects cannot be 100 excluded Please understand that these types of effects as long as they are within the standard of specified limits cannot be considered as a device defect in terms
48. d control Pixel error A pixel error is a defective pixel usually on an LCD Pixel errors may be caused by production faults They are expressed for example by a constantly lit pixel or a constantly black pixel Single defective pixels however are excluded from a guarantee Progressive JPEG Progressive JPEGs are built up gradually The picture quality improves continuously during loading ProScan Progressive Scan Progressive Scan abbr PS or full picture method is a technique in the picture build up of monitors TV sets beamers and other display devices in which the output device is not sent line interlaced half pictures unlike in the interlace technique but real full pictures R RGB Colour signals red green and blue Glossary S Satellite tuner Receiver for satellite programmes SDTV Standard Definition TeleVision SECAM French picture standard Set Top Box In the entertainment industry a Set Top Box STB is a device that is connected to a different device usually a television and thus offers the user additional use possibilities Signal input groups The signal sources are divided into different groups depending on the applied signal All signal input groups with their cor responding signal types and the possible inputs are listed below TV analogue Signal type FBAS YC RGB SD 480i 576i Component SD 480i 576i Input Tuner analogue AV1 AV2 AVS COMP In TV digital Signal type DVB
49. d mode E A optimal 4 o t Da d gt Select the number of speakers you want to hear lt Additional sound settings for volume adjustment and for Sound mode im AS long as you can still see the volume bar or the selection of speakers for sound mode oi 3 a Call additional sound settings Volume aie d gt Select sound setting se Go to the menu line below Wf d gt Make changes Sound settings via the TV menu im In normal TV mode without other displays Call TV menu E 4 gt Select Sound D v go to the menu line below d gt Select desired sound setting v Go to the menu line below d gt Make changes Explanations of the sound settings Sound mode optimal Lg EL 3m SL SL Amplifier a Sound adjustment Headphone vol Loudness Dolby PLII mode more Loudspeaker Headphone sound Auto Volume AV output signal Maximum volume Switch on volume Volume adjustment for current station Balance Select the number of speakers you want to hear The selection depends on the connected sound components from page 41 and on the transmitted audio signal m fthe number of speakers appears in brackets the sound of missing speakers is transmitted by the existing speakers virtual The momentarily reproduced audio signal is output with the ideal number of speakers Play centre sound or mono left right Play front sound L R stereo Play front and cent
50. d without expensive installation and connection of several speakers The Sound Projector is easy to set and operate Loewe DVD recorder The DVD recorders from Loewe are characterised by form and colour which match Loewe TV sets adapted user guidance and technology Combined these devices form a system that offers many advantages Loewe Blu ray Player With the Loewe Blu ray Player BluTech Vision you are ideally equipped for the successor format to DVD With the Loewe system integration you control BluTech Vision and your Loewe TV set simultaneously with the Assist remote control 58 Cube i Rack The Cube i Rack is designed as a supplemental rack that can accommo date two peripheral devices such as DVD player and or DVD recorder as well as the subwoofer of the Loewe Individual Sound speaker system If a subwoofer is not used then the Cube i Rack can accommodate up to four peripheral devices Cable AUDIO LINK adapter 1 5 m Loewe order no 89954 001 AUDIO LINK 1 5m Loewe order no 89952 001 AUDIO LINK 6m Loewe order no 89952 002 AUDIO LINK 10m Loewe order no 89952 003 Cubic plug cable 1 5m Loewe order no 90418 930 Subject to availability Accessories Setup possibilities mm Individual 46 Compose Full HD e Wall holder WM54 delivery status e Screen Wall Mount 2 e Table Stand 40 46 Compose e Center Floor Stand Compose e Screen Floor Stand MU Wall holder WM 54 Screen Wall Mount 2 Table Stand
51. de settings Menu item only appears when for example a stand with motor drive see Accessories Installation possibilities page 59 is used GB 16 Pre record time Post record time a ana na na N a a ul Operating convenience Radio menu Overview diagram Radio menu Sound mode Search wizard Dolby PLII mode Manual adjustment Sound adjustment Change stations Headphone volume Select change favourites Loudness more Auto volume Maximum volume Switch on volume Volume adjustment for current station Balance Other menus Overview diagram Teletext menu Select provider Newsflash Station selection Reveal Data capture Switch on TV when marked off Settings on only for DVB Preview pages on for DVB analogue Sub title pages Switch on TV when marked Personal text pages no Character set yes hiText Switch off today only Switch off daily One time reminder Wake up Mon Fri Wake up Sat Wake up Sun Wake up with Wake up signal volume 17 Daily operation Select station With the station list m nnormal TV operation wit
52. display TOP Table of Pages Teletext system in which the individual pages are divided into topics The blocks stand for a higher hierarchy level e g News Sport Programmes and the groups for the level below e g Home Abroad Football Tennis Abbreviations can be assigned to the pages which are displayed in colour on the bottom line and can be selected with the four coloured buttons on the remote control Information is also transmitted which pages exist and which have sub pages Tuner Another term for receiver U USB Universal Serial Bus Serial bus system for connecting external devices USB card reader USB stick V VGA PC interface for connecting a monitor Virtual Dolby Surround A technology certified by Dolby It creates a virtual sound from two speakers Prerequisite is Dolby Surround or Dolby ProLogic as a source The used virtualizer processes all multi channel signals and gives the impression of additional speakers VPS The Video Programme System VPS is a signal that some not all television transmitters transmit in the vertical blanking interval of the television signal The signal is used by video and DVD recorders when re cording programmes to react to delays in start time programme changes and excesses of the planned program time Y Ycc Ypp Colour standards for Set Top Boxes YCbCr Digital colour model see COMPONENT IN YPbPr Analogue colour model see COMPONENT IN Index 0 9 24p format 39
53. e antenna Analogue DVB C DVB T antenna Plug the antenna plug of antenna system cable system or room antenna into the ANT2 socket The connecting cable between ANT TV ANT OUT is plugged at the factory Satellite antenna Connect an antenna plug e g from the antenna change over switch or from the twin LNC of the satellite system to the sockets ANT SAT and ANT SAT2 When connecting only one SAT antenna cable connect it to ANT SAT ANT2 Individual Compose EI 46 mmm mmm mmm mmm wf 220 240V 50 60Hz Connections on the back of the set see also page 5 Replace the cover over the connections Connecting speakers How to configure and connect TV speakers speaker systems or active speakers is described from page 41 Receiving coded stations When using a CA module and a Smart Card to receive coded stations please observe the handling of the CA module see page 34 Initial installation Turning the set on off Switching the TV set to standby mode E i Activate the mains switch on the bottom left of the set The display in the control panel on the front of the set will be illuminated red the set is now in standby mode Switching the TV on off on the control unit Press the on off button in the middle for about 2 seconds to switch the TV set on off Display Meaning of the display colour 3 Red Standby mode Green TV set is switched on Orange Radio
54. e returns to the TV picture and the PIP window closes Start and end Picture in Picture mode Show hide PIP In the Standard PIP function a green frame indicates that the station selection acts on the PIP picture A white frame means that the operation refers to the main picture If the frame is blue the station play is active in the PIP picture If the iPIP function is activated this is indicated by an orange frame im For TV sets with MHEG 5 Software you switch from the green bar frame to the white by using the PIP key The next time you press the PIP key PIP is switched off Standard PIP operation PIP as freeze picture im The frame is green if not press the green button Re Red button Freeze picture in PIP on off GB 28 Swap contents of PIP and main picture me The frame is green if not press the green button COO cn Yellow button swaps contents of TV picture and PIP picture Select the PIP picture me The frame is green if not press the green button Select the station as usual alg D G il 2 ZDF 17 00 18 30 Flora amp Fauna Select the station for the main picture im The frame is white if not press the green button Select the station as usual 1 ARD 17 30 20 00 Toskana Scan station in the PIP m The frame is green if not press the green button OLOLLO E Blue button Start Scan stations The frame turns blue the stations now cha
55. e the picture of the connected device See the operating manual of the connected re production device When playing from Digital Link Plus devices the picture is always displayed immediately regardless of the setting Select the AV socket to which the device of which you want to hear the digital sound is connected Connect the digital output of the external device to the digital input of the TV set see page 47 If a device with digital audio is not connected then select no Connection possibilities for a DVD video recorder There are two possibilities for viewing the picture of the connected recorder 1 Use appropriate cables in conjunction with the connections assigned by the connection wizard This always offers the best quality and the greatest convenience such as automatic switch over when playing from a connected device 2 You are using the antenna connection between recorder and TV device However this reduces the quality Connecting antenna to the DVD video recorder If you want to receive and record analogue stations it is useful to loop the recorder into the antenna cable as shown in the connection example on page 37 bottom right If the antenna connection is also used for the playback because the devicers are not connected by EURO AV cables you have to search for the recorder station and save it in the TV set 38 Proceed as follows see also the operating manual of the connected recorder a im nse
56. eft indicates that the function is ac tive If the contents of the message are updated and it is a small newsflash this is displayed in the TV picture If it is a full screen page the symbol is displayed in blue and the page can be called with the OK button Shows concealed information e g for quiz questions or VPS times in the programme preview pages Explanations of the Teletext menu functions Recording wizard Settings Preview pages Sub title pages Personal text pages Character set HiText A wizard for recording via teletext helps to program an external recorder or the integrated digital recorder see also the left column Other Teletext menu functions Input of the first teletext programme preview page if this deviates from the factory setting page 301 Input of the teletext subtitle pages for every station if this deviates from the factory setting page 150 Define up to six teletext pages which can be opened later from a list in the menu Teletext functions Personal text pages in TV mode press green button see page 22 Teletext character set can be switched to other languages Russian Greek Polish and Turkish Improved graphic representation of the Teletext Not offered by all stations Digital Teletext MHEG 5 In the UK or Ireland the teletext for DVB T stations is transmitted as per the MHEG 5 standard It contains text graphics functions and links m Only for TV sets with M
57. ers in 10 Hz steps A khh i ih 3 d Sound components it Connect front speakers External speakers EE CIE m Selectthe start value of the frequency response of the speakers for the right setting e g 50Hz for the specification Frequency response 50 20 000Hz See the technical data of the speakers for the value im Youcan replace the external front speakers by the TV speakers if necessary In this case select TV speakers Then transmit the sound of the front speakers OK continue to connect and set the surround speakers d gt Select yes for external speakers m no Surround speakers are connected these can be simulated using the front and centre speakers e Goto the menu line below and d gt set thdower limit frequency of the surround speakers in 10 Hz steps m Seeche start value of the frequency response of the speakers for the right setting OK continue to connect and set the centre speaker 4 gt Select whether theTV speakers or an External speaker is to reproduce the centre sound or no if no centre speaker is connected m fno centre speaker is connected the front speakers also transmit the centre sound parts additionally fotxternal speakers or TV speakers go to the menu line below and d gt set thdower limit frequency of the centre speaker in 10 Hz steps m Seeche start value of the frequency response of the speakers for the right setting OK continue to connect the Subwoofer
58. es if you want to delete all the existing stations and automatically search for new ones Do also use the first installation if you want to change to receiving MHEG 5 stations attend restrictions for DVB software update see page 35 Call TV menu a d gt Select Settings Roy go to the menu line below 4 gt Select Stations v go to the menu line below 4 gt Select Search wizard v go to the menu line below In the upper info text the current search settings will now be displayed United Kingdom DVB T h TV menu l Settings i Stations Change search settings Q If you want to change these search settings d gt Select Change search settings OK wizard prompts search settings If you agree with these settings d gt Select Start search update OK start search R Red button Abort current search update GB 24 Explanations of some search settings Set location Signal source Antenna cable TV colour standard Encrypted stations DVB T Search method DVB C Settings DVB S Symbol rate Select the country for country specific defaults and station sorting Select antenna cable or satellite here depending on where you want to search for new stations At this point you can also call a configuration of the DVB T and DVB S antennae via the green button see page 12 With selection of set location the conventional TV standard colour standard is the default
59. et equipment 6 TV speakers 10 41 U USB stick 35 50 V Video source 19 Videotext subtitles 33 Volume 20 Volume adjustment 20 VPS times 33 Service lt gt Loewe Austria GmbH Parkring 10 1010 Wien Osterreich Tel 43 810 0810 24 zum Ortstarif Email loewe loewe co at International Dynamics Australasia Pty Ltd 129 Palmer Street Richmond 3121 Victoria Australia Tel 61 3 94 29 08 22 Fax 61 3 94 29 08 33 Email mail internationaldynamics com au BAD Loewe Opta Benelux NV SA Uilenbaan 84 2160 Antwerpen Belgi Tel 32 3 2 70 99 30 Fax 32 3 27101 08 Email ccc loewe be CH Telion AG Rutistrasse 26 8952 Schlieren Schweiz Tel 41 44 732 15 11 Fax 41 44 732 15 02 Email infocpe telion ch C HADJIKYRIAKOS amp SONS LTD Prodromou 121 PO Box 21587 1511 Nicosia Cyprus Tel 357 22 87 21 11 Fax 357 22 66 33 91 Email Efthymios hadjikyriakos com cy CD Ing Ivo Tietz Doln n m 9 746 01 Opava esko Tel 420 553 624 944 Fax 420 553 623 147 Email tietz opava cz CD Loewe Opta GmbH Customer Care Center Industriestralse 11 96317 Kronach Deutschland Tel 49 1801 22256393 Fax 49 9261 99500 Email ccc loewe de 64 Kjaerulff 1 A S C F Tietgens Boulevard 19 5220 Odense S Denmark Tel 45 66 13 54 80 Fax 45 66 13 54 10 Email mail kjaerulff1 com ce Gaplasa S A Conde de Torroja 25 28022 Madrid Espana Tel 34 917
60. form a Provider search The stations offered by the provider will be displayed in a list Station selection Data capture Switch on TV when marked You can remove certain stations from the programme guide These stations must be deactivated in the Station selection First all stations for which programme infor mation can be provided are marked with a A Stations without a M are not included in the programme guide With the the coloured buttons you can select or remove the individual stations select all stations at once or select only the stations on the favourites lists Marking the stations according to reception ranges D analogue stations via antenna cable for which the current provider supplies data digital terrestrial stations DVB T digital cable stations DVB C digitale satellite stations DVB S If you want to use EPG for analogue and digital stations select on for DVB analogue If you want to use EPG and only have DVB reception select on only for DVB If you are not using EPG and therefore do not want to receive any EPG data select off After making changes in the EPG menu or each time the mains switch has been switched off the EPG data must first be captured To do this switch on the device and select for analogue stations the station that you have defined as provider and let the TV set run for about 1 hour with the selected station Or switch the TV set to standby mode After 2 minutes the dis
61. function can be called directly with OK Selecting a keyword O Enter initial letters with the numeric buttons like with a mobile phone keypad see page 14 or go with d gt to the preceding next letters v from line to line D P P scroll backwards or forwards in whole pages L You want to have the TV set switch off automatically at a specific time Select the keyword Switch off gt Automatic with OK you will go to the setting Example The Assist menu The most important additional functions of the TV set can be called directly with the Assist menu Open Assist Call Assist menu aw Selecadditional function OK calls the function TV Radio digital Teletext DR archive PhotoViewer ER Index Your personal photo selection Description of the individual functions TV mode see page 18 onwards Radio mode see page 36 Teletext mode see page 32 onwards DR archive see Digital Recorder manual PhotoViewer see page 50 onwards Index see left hand column 15 Operating convenience TV menu Overview diagram Picture adjustment Sound mode New devices modifications Stations Contrast Dolby PLII mode Sound components Search wizard Colour intensity Sound adjustment Antenna DVB Manual adjustment ere Ch tati Colour temperature Headphone volume Digital Link Plus EMCI SONS e Select change favourites Brightness Loudness Miscellaneo
62. g devices here DVD EA DVD recorder VCR SAT STB Decoder Camera AV COMP IN HDMI DVI HDMI DVI Proceed Goyal aveyeiu ol isyere ay al rels O Yellow button Place a check mark after the devices to be connected E OK Proceed The connection plan is displayed again Connect the devices to the back of the TV set in this example the DVD player DVD to AV1 the DVD recorder DVD to AV2 Signal type Proceed Select the signal type of your set Leave the setting on automatic if you are not sure TV set Connection _ eme ZEECHNEN example of a 7 DVD recorder AUDIO digital In VIDEO VIDEO OUT SELEC AVI AUDIO VIDEO DVD recorder m UseEURO AV cable with the right angled plugs continued on the next page gt 37 GB Operating additional equipment Explanations of important settings Signal type Immediate playback Assign digital audio input The signal type of the devices that can be connected can vary greatly If you are not sure leave the setting for Signal on Automamtic CVBS YC e g for DVD Player Recorder or Autom VHS SVHS e g video recorder otherwise select the right signal type See the glossary on page 60 for further information If the picture from a connected device is to be displayed immediately on the TV set during playback select yes A Switching voltage is allowed so that you do not have to switch over manually to se
63. h an on screen message the next time it is switched on see right column Loading new software Manual search for new software via USB satellite If it is not automatically displayed that a new software is available when switching on the set you can also run a manual search The system first checks whether a software update is available on an inserted USB stick If not the system will search for an update via satellite Je SH Call TV menu d gt Select Settings v go to the menu line below 4 gt Select Miscellaneous v go to the menu line below 4 gt Select Software update OK calls software update wizard The software versions currently loaded in the set are listed Software update Software type TV base software OK DVB software Proceed 2 a e Select software type lo OR 4 e pA Select TV base software or DVB software OK start search If new versions are available then a subsequent screen message will be displayed Loading new software mg New software available via search w fa new TV and a new DVB software is available in the automatic search for new software versions via satellite you can select the software type to be updated Update options Load new software now oc Load new software after switch off to standby Keep current software a wv Selecupdate option Load new software now ia Load new software after switch off to standby update after switching off Keep current
64. he sound components wizard manually later and add new devices Further information is available from page 37 Connection wizard and page 41 Sound components wizard continued on the next page gt Initial installation Digital Link If you have registered and connected a recorder in the Positioning aligning DVB T antenna Plus connection wizard the Digital Link Plus transmission begins at the end of the sound components wizard If a Digital Link Plus capable recorder is connected the Station list of the analogue stations is transmitted to the external recorder If you are receiving one or more DVB T stations with picture and sound interference then you should change the installation location and align ment of the antenna Ask your dealer to tell you which channels are used to broadcast the DVB T stations in your region You can also call Digital Link Plus under TV menu gt m n normal TV mode without other displays Connections gt Digital Link Plus A DVB T station is received and selected If you have not connected a Digital Link Plus capable recorder you can abort the transmission Call TV menu d gt Select Settings v go to the menu line below Explanations of the DVB T antenna i Sclee Stations Room With good reception conditions a room antenna can be v go to the menu line below antenna used for DVB T socket ANT2 d gt Select Manual adjustment Active Under less favourable reception conditions it
65. hout further displays no With the keys P and P on the remote control favourites selected CG P P station up down The station display with sound identification is displayed OK call Station list briefly e Sorting im ffavourites are selected the station is switched over numerical COMP IN 5 hr fernsehen y HDMI1 DVI 6 Phoenix in the favourites list with P P see page 19 Ka HDMI2 DVI 7 BR alpha sa E j ifi j j AVS 9 EinsExt D me Thesymbols for the sound identification are described ae poner on page 23 VCR 11 EinsPlus 0 VIDEO 12 ZDFinfokanal im fthere are additional languages or DVB subtitles for een E Dee j j j j 3 WDR K l 15 art DVB stations then language and subtitle selection is EE E shown below the station display 21 00 21 45 Urlaubsparadies Toskana Seealso page 23 Additional selection possibilities for DVB stations Switch ti 0 0 Sele With the numeric keys of the remote control P P scroll in the pages of the station list Idiot stations Caa gt gt 44 Jump to the next station block Keep the numeric button pressed for one second the station changes immediately a ed gt Mark stations D long Or Press the numeric button briefly the station changes after DOE or 2 seconds changes immediately in case up to 9 stations Enter the number of the station with the numeric buttons are stored The marked station is shown as a small picture 2 digit and 3 d
66. ial installation page 11 or in USB stick card reader the connection wizard page 37 Before you connect other devices or make any changes please start the connection wizard page 37 and the sound components wizard page 41 and then follow the instructions that are displayed on the TV set S VHS connection AVS e g for camcorder Video in AVS 6 Audio in right AVS lt 1 Audio in left AVS 1 AUDIO OUT L R audio output left right analogue mains switch AUDIO IN1 L R audio input left right analogue AUDIO IN1 C centre audio input analogue SD HD COMPONENT IN Cb Pb Cr Pr Y component video inputs ANT2 ANT SAT idk ve Antenna cable Satellite antenna AUDIO DIGITAL IN digital audio input analogue digital Sat tuner 1 AUDIO LINK surround audio outputs analogue Tuner 2 CONTROL rotating stand control RS 232C serial interface i 220 240V 50 60Hz mains connection J 220 240V 50 60Hz D DD HD DD UD OM Dn D pu 00 mains connection 2 ANT OUT Di AV2 RGB Speakers Left Speakers Left Connect antenna Euro AV Euro AV Speakers Right Speakers Right output with ANT TV socket 1 socket 2 SERVICE service socket tuner 1 AUDIO IN2 audio input analogue patente ANT TV HDMI2 HDMI DVI input 2 Satellite antenna Antenna cable Sat tuner 2 analogue digital HDMI1 HDMI DVI input 1 Tuner 1 PC IN VGA XGA input AUDIO DIGITAL OUT digital audi
67. icture and sound data are transmitted without data compres sion and therefore lose none of their quality Your TV set automatically shows 24p movies see glossary page 60 output by a player connected via HDMI e g Loewe BluTech Vision in the original 24p format Film quality improvement DMM must be set to on here see page 21 Using a DVI HDMI adapter cable the digital video signals of a DVI player can also be played via the compatible HDMI connection The sound must be fed in additionally HDMI and DVI both use the same copy protection method HDCP HIGH DEFINITION TELEVISION Connecting the device Connect the device by an HDMI cable type A 19 pole to the HDMI1 DVI or HDMI2 DVI socket of the TV set If a DVI HDMI adapter cable is used the appropriate sound can be fed in via the audio input socket AUDIO IN1 analogue or AUDIO DIGITAL IN digital on the TV set See also page 47 It is not necessary to log in HDMI devices in the connection wizard Playback from the device Call AV selection HDMI1 DVI 0k Ss 4 gt Select HDMI1 DVI or HDMI2 DVI socket OK to switch over Start playback on the connected HDMI device The best possible format for the picture will be detected and set automatically Digital Link HD in appropriately equipped HDMI devices As long as HDMI is selected as a memory location all remote control commands which the connected HDMI unit can handle are passed on to it Volume Sound on off S
68. igit stations Rm Press first and second numeric button briefly OK the marked station is called Keep the last numeric button pressed for one second the COLO E Blue button Changes sorting from numeric to alphabetic short short omg station changes immediately Or Press all the numeric buttons briefly the station changes Sorting after 2 seconds changes ilmmediately in chase of up to alphabetically Ser Se 99 or 999 stored stations SC Das Erste RR ARD DVD 4 digit stations AVS DVD REC Bayrisches FS CEES Press all four numeric buttons the station changes imme BR alpha BR EinsPlus diately Eurosport CNN INT EinsExtra EinsFestival RR all short im favourites are selected the station in the favourites list S is switched to with the numeric buttons see page 19 f l g Maximum two digit station numbers are possible im fyou select an unoccupied station slot the next avail able station is switched to 21 00 21 45 Urlaubsparadies Toskana Enter initial letters with the numeric buttons like with a mobile phone keypad see page 14 The first station for the specified letters is marked OOO Call last viewed station for TV sets with MHEG 5 software 7 a e You can switch back and forth quickly between two stations using this buttons a ed gt Mark stations OK the marked station is called GB 18 Daily operation With the favourites lists You can sa
69. ing Recording time Time of recording VPS Use VPS data yes no Some stations do not broadcast a VPS signal Recording type once Mon Fri daily or weekly In timer recordings via EPG Serial can also be selected mg fyou use an external recorder without Digital Link Plus you have to select the recording source in the recorder e g AUX This is also the case when DVB programmes are to be recorded The TV s receiver is used ug fyou use an external recorder with Digital Link Plus or a comparable system e g P50 this is controlled automatically Operating additional equipment Programming the timer with the timer overview A timer recording can also be programmed manually Call Timer list You see a list of all previously programmed timers Mon 14 09 17 15 17 45 Das Erste Brisant Biathlon Weltcup wissen spezial Wed 16 09 14 00 15 50 ZDF Thu 22 09 20 15 22 25 3sat w Green button Change timer recording Yellow button Delete timer recording Red button New timer recording Programming the timer manually ue The timer list is open R Red button Call the recording wizard INFOR lt lt E END Recording wizard 0k lt a gt Via EPG 4 gt Select Manual OK call Station selection d gt aw Select station OK calls the Timer data For time data input see page 48 After confirming the timer data the new recording is transferred to the timer overview Explanat
70. ion of the setting possibilities of the recording wizard Via EPG Timer programming via EPG see Programming a timer recording with the EPG page 48 Via Teletext Timer programming via Teletext see Programming a timer recording via Teletext page 48 Manual Programming timer manually see above Timer recording with external devices im tis not possible to record HDTV broadcasts with external devices Use the internal digital recorder for this Recorder with Digital Link Plus If you use an externally connected recorder with Digital Link Plus or a similar system the TV set and connected recorder exchange data e g compare Station lists TV set recorder or timer data of analogue stations Please consult the operating manual of your recorder to find out if your recorder is Digital Link Plus compatible In addition use only Euro AV cables for the connection between TV set and recorder Analogue stations The timer data are transmitted automatically from the TV set to the recorder after programming is complete For DVD recorders in addition the recording quality SQ or EQ is also transmitted The recording then is controlled by the recorder and the recorder tuner is used for reception of the programme The recording data are not saved in the timer overview of the TV set Consequently if you want to change or delete the timer data then you must do so on the recorder Digital stations If you want to record digital stations with
71. irm Timer data as necessary Programming a timer recording via teletext im YOU are in Teletext mode if not press the TEXT button Do 14 09 06 09 36 42 Das Erste In aller Freundschaft Zweite Begegnung D 2005 Sturm der Liebe 221 Eisb r Affe amp Co Brisant Verbotene Liebe Das Geheimnis meines Vaters 19 Abend gt ARD morgen ox Record Select programme E Call the programme pages of the current station Change preset page numbers see page 33 O Y Green button Go to the appropriate page z v a Select desired broadcast E OK calls Timer data R Change or confirm Timer data as necessary Enter timer data Timer data are displayed after selecting the programme you want to record You can change these before confirming s amp s TY 12 00 Brisant Recorder DVD REC or Be Station 01 Das Erste Date 14 09 2006 Recording time 17 15 until 17 45 VPS no Recording type once only o OK confirmsTimer data or change if necessary d gt Select Recorder Ge a e Select Date Enter the recording date with the numeric buttons a v Select Recording time Enter the recording time with the numeric buttons a v Select VPS d gt Set yes no a v Select Recording type d gt Set once Mon Fri daily weekly OK confirm the Timer data Setting possibilities in the Timer data menu Recorder Selection of the connected integrated recorder Date Day of record
72. is advisable OK call manual adjustment antenna to use an active antenna which has to be set accordingly in the initial installation or in the TV menu gt Connections Antenna DVB gt Antenna DVB T see DVB T antenna on page 12 Unidirectional If the location is outside of the normal transmission antenna range then a directional antenna can be used to improve I i i Signal source DVB T reception quality Channel E05 Frequency 177 50 MHz Bandwidth 7 MHz Name 12 Test C N 96 mmm Level 99 a ee The signal source is already on DVB T due to the station preselection Position and align the antenna in such a manner that maximum values for C N and Level are obtained Ce Ce DA Blue button Start search Search for DVB T stations one after another and compare values for C N and Level Then position align the antenna to the weakest station so that maximum values for C N and Level are obtained Thereafter perform an automatic search for all DVB T Stations see page 24 Explanation of the setting possibilities Bandwidth Depending on the selected channel and country the associated bandwidth of 7 or 8 MHz will be set auto matically 13 Operating convenience General information on menu operation Menus for the individual operating modes TV Radio PIP EPG Teletext PhotoViewer and Digital Recorder are called with the MENU button Other menus can be opened with other buttons on the remote c
73. izards This TV set offers user prompting with wizards that take you through the settings step by step You can return to the previous step or exit the wizard at any time The wizards in overview Initial installation The initial installation wizard helps you with the initial installation and connection of any existing equipment see page 11 Setting up the antenna You enter in the antenna wizard which antenna signals are available to you The antenna wizard is called in initial installation see page 11 You can also call the antenna wizard in the TV menu under Connections gt Antenna DVB Antenna DVB S or Antenna DVB T Search wizard If you want to search for new stations after the initial installation or if you have set up your antenna for the first time then you can handle this task with the help of the search wizard see page 24 You will find the search wizard in the TV menu under Settings Stations Search wizard Connecting external devices The connection wizard ensures that all devices are correctly registered and connected It is started automatically at the end of the initial instal lation wizard but can also be called separately see page 37 You will find the connection wizard in the TV menu under Connections gt New devices modifications Connecting sound components The sound component wizard ensures that the components which re produce the TV sound are correctly registered connected and set It
74. kers to the TV set Adjusting the speaker system Calling the sound components wizard im In normal TV mode without other displays Call TV menu E 4 gt Select Connections E v go to the menu line below d gt Select Sound components OK calls the sound components wizard 3 8 Sound components TV speakers Speakers system or HiFi AV amplifier Sound projector HiFi AV amplifier or TV speaker switchable Sound projector or TV speaker switchable Sound playback via speakers system Enter here that you want to hear the TV sound over a speaker system If you connect active speakers please use the setting Speakers system v a Mark Speakers system O OK to continue SE Distances Sound TOUSE Ge HI Speakers system Configuration modification e If nothing has been set yet the factory settings or other wise the last set values are displayed continued on the next page gt 43 Operating additional equipment If you want to set up or change a speaker system y d gt Select Configuration modification OK call selection je ce Sound components i Complete o fe Connections only Distances only Levels only or v a Select Complete OK continue to connect and set the front speakers i VM f External speakers S 40 Hz Pp us 4 gt Select External speakers v go to the menu line below and d gt set thdower limit frequency of the front speak
75. l audio room sound EPG Teletext and other supplemental services through digital technology C stands for transmission via cable S for distribution via satellite and T for terrestrial or antenna distribution DVD Abbreviation of Digital Video Disk and later Digital Versatile Disk DVD preceiver Combi device of DVD player and radio without integrated amplifier DVI Digital Visual Interface is an interface for transmitting digital video and graphic data without audio Dynamic contrast ratio Here the light intensity of the display is adapted in case of a high black portion in the picture The so called backlights are dimmed automatically and the contrast ratio increases temporarily i e dynamically E Electronic Programme Guide See EPG EPG Electronic Programme Guide is the electronic variant of a printed television programme guide Using the EPG you can watch the TV programme of the TV stations which transfer the appropriate data The overview of the programmes contains the title beginning and end and the duration of the programme In addition also a brief description of respective content of the programme is displayed Euro AV socket Interface for connecting video devices to a TV set This socket is also referred to as Scart socket Glossary E FLOF Full Level One Facilities Teletext system in which designations and numbers of the jump destinations are transmitted separately for every page on the bottom line Thi
76. l photos to your new TV set s USB connection and view your photos via the integrated PhotoViewer software All the functions can be operated with the Loewe remote control We have designed the TV set in such a manner that you can easily operate it with the help of wizards and menus Information about the menu settings is displayed automatically You will quickly comprehend the context Scope of delivery e LCD TV set Mains cable e Wall mount WM54 incl installation instructions e Remote control Assist with two batteries e Marketing and service card e Operating instructions of the Digital Recorder e This operating manual No speakers are included in the scope of delivery for the Individual Compose TV set You can custom configure the speaker equipment with your TV set and adapt it to your requirements Ask your dealer in this regard 6 About this operating manual For many questions concerning the technology you will find an answer in the index of your TV set If your question concerns TV set operation you can access a function directly from the index of the TV set Owing to this possibility this operating manual only explains the most important operating steps The index glossary from page 60 onwards gives explanations of certain terms used in the TV set and the operating manual Paragraphs which begin with the symbol indicate important instruc tions tips or conditions for the following settings Terms which you wi
77. lace newspapers or cloths on over the TV Ensure that there is at least 10 cm free space on the sides and above the set for air circulation if the set is placed in a cabinet or on a shelf Like any electronic device your TV set requires air for cooling Obstruction of the air circula tion can cause fires The set is suitable for different installation solutions See the instructions for assembly for the different installation solutions Stand the TV set with the table or floor stand only on a level sturdy horizontal base Particularly ensure that the set does not protrude to the front when placed in or on pieces of furniture Set up the device where it is not exposed to direct sunlight and where it is not exposed to additional warming through heating elements Prevent metal items needles paper clips liquids wax or similar items from getting into the interior of the device through the vent slots in the rear panel Such objects can cause short circuits in the set which could possibly cause a fire If something should get into the interior of the set then immediately unplug the mains plug of the device and contact customer service for more information For your safety Repairs and accessories Never remove the back of the TV set yourself Only have your TV device repaired or serviced by authorised television technicians Only use original accessories such as Loewe stands if possible see Acces sories on page 58 an
78. ll find in the menus or printed on the remote control or TV set are written in bold type The necessary control elements are shown in the descriptions to the left of the text containing the instructions for action TV set equipment See the rating plate on the rear of the set for the precise product desig nation The precise features are listed in the Integrated features item in the index of the TV set see page 15 Trademarks Manufactured under licence from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Manufactured under licence from DTS Inc U S PAT NO S 5 451 942 5 956 974 5 974 380 5 978 762 6 487 535 and other U S and worldwide patents issued and depending DTS IS A TRADE MARK OF DTS Inc popoy popoy S dts DIGITAL VIRTUAL SPEAKER PRO LOGIC O Digital Surround The screen font LoeweL2700 is based on the Tavmjong Bah Arev tavmjong free fr font which in turn is based on Bitstream Vera Bitstream Vera is a trademark of Bitstream Inc This set contains a software which is based partly on the work of the Independent JPEG Group Acknowledgements Loewe Opta GmbH Industriestra e 11 D 96317 Kronach www loewe de Printed in Germany Date of issue 10 07 4 0 TB BP FP TV SW 4 0 0 DVB SW 4 0 0 Loewe Opta GmbH Kronach All rights including translation technical modifications and errors reserved Welcome Operating convenience with w
79. lli 0 9 Select static ER Nex O R Green button Select the next favourites list Rename favourites list m Favourites list right column must be selected If not change the list with gt w w CC E Blue button Starts Rename favourites list Numeric buttons Enter new name same procedure as tae for rename station see page 26 OK to save new name Add station to favourites list im Al stations left column must be selected If not change the list with lt 4 ES e P P Scroll in the pages of the station list if necessary UJ a v Mark station or select station with thaumeric buttons for alphabetical station sorting enter the initial letter which is to be transferred as a favourite to the favourites list D E QO OK transfers the station to the favourites list The new station is inserted at the end of the favourites list Proceed in the same manner with additional stations Delete station from favourites list mg Favourites list right column must be selected If not change the list with gt E V Ce Red button Starts Clear favourite list a v mark station to be deleted OF EI OK confirms clear favourites list Move change order of stations in the favourites list mg Favourites list right column must be selected If not change the list with gt a v mark station to be moved SS O a Yellow button Starts Move station a
80. menu will be displayed im Theselection line is also displayed automatically when a new broadcast with different options to the previous broadcast begins or when you switch stations The following options are possible Red button Channel selection for multi channel providers Green button Language audio selection Yellow button Time selection Protection of minors DVB subtitles Blue button TEXT The selection menus are only available as long as the Status display is shown However you can call them again by pressing the END button Explanations of the selection possibilities DVB subtitles The subtitle selection refers exclusively to DVB subtitles and is not offered by all stations Many stations only transmit subtitles by teletext You can make general settings for DVB subtitles under TV menu gt Settings Miscellaneous DVB subtitles Managing stations TV stations Various options for managing stations are available via the TV menu For example the description for TV stations For radio stations the same applies except that the radio menu Is called in radio mode see also page 36 im Station management is not possible if a programmed timer recording is still pending Search update stations Search wizard In the search update with the search wizard new stations are searched for which are not yet stored mg Youhave to repeat the initial installation see page 11 and automatically search for new on
81. mode Index Mark the first key word and call it with OK Then select the language and confirm it with OK Wait until the timer recording ends or delete the timer recording page 49 a Activate Digital Link in the recorder see operating instructions of the recorder b Connect EURO AV cable page 37 c Register recorder page 37 a In the connection wizard TV menu gt Connections gt New devices modifications compare the connection diagram with the actual installation and connect as shown if necessary page 37 b Set the correct standard page 16 c Set the correct signal type page 37 If for AV standard or AV signal Automatic is set then this can cause errors to be detected with signals that do not comply with standards In this case standard and signal must be set according to the information in the operating manual of the external device a Follow the instructions in the connection wizard TV menu gt Connections gt New devices modifications and select the appropriate decoder station page 37 b Follow the instructions in the connection wizard and select the right audio source Decoder TV oder Autom page 37 see also the decoder manual 55 Troubleshooting Problem Digital Link Plus does not work With Teletext various character sets are displayed incorrectly No sound via the external digital audio amplifier The picture of a connected external recorder is visible but the
82. n amplifier is connected and your TV set has TV speakers connected In the sound mode selection the sound reproduction can then be switched back and forth between the amplifier and the TV speakers Specify sound formats which can be decoded with the digital amplifier see operating manual of the used ampli fier Select either stereo or surround amplifier For every connected surround amplifier select whether the TV loudspeakers are to be used as centre speaker If so establish a connection between the centre output of the amplifier and the centre input of the TV set AUDIO IN1 C with a cinch cable Attention Do not use the centre speaker connection of the amplifier use the centre pre amp output instead Connecting digital audio amplifiers Continuation of the left column above For digital audio transmission Select yes Connect the digital audio output of the TV set AUDIO DIGITAL OUT with the digital audio input of the amplifier via a cinch cable GRELL EES Q rir CH 0000000000 CH O000000000 i TV set Digital amplifier Sound formats amplifier tyoe and other settings see explanations of the setting possibilities left hand column Connecting analogue audio amplifiers Continuation of the left column above For digital audio transmission Select no Connect the analogue audio output of the TV device AUDIO OUT UR via a stereo cinch cable to the analogue audio input of the amplifier Q GC
83. ncrements only in SS bd pause mode rr or P next photo lt lt 44 or P previous photo STOP button End slide show Calling the PhotoViewer menu In the PhotoViewer menu you can make picture settings and select the memory medium im The photo overview is displayed Call the PhotoViewer menu INFO ME va PhotoViewer menu Go to Picture 001 GE Explanations of the setting possibilities Go to Within the folder select a photo directly or go to the beginning or end of the folder Picture display With Optimum size the photo is reduced or enlarged in size so that the screen is optimally filled With Original resolution each pixel of the photo represents one pixel on the screen If the photo resolution is higher than that of the screen then portions of the photo will be cropped Picture change Set the display time per photo in a slide show to between 3 and 60 seconds The loading time for the photo depends on the size the number of stored files and the transmission speed of the memory medium A photo change may therefore take longer than stated Picture crossovers There is a choice of four different photo transitions for changing slides You can also have the photo transitions run in sequence Photo info Display additional information about the picture Record ing time and date resolution and picture size Picture settings Set picture adjustment contrast colour intensity colour tempe
84. nd select the one with which you get a clearer bass reproduction from your listening position OK to confirm the setting and exit the wizard This ends the sound components wizard for connecting and setting up a speakers system 45 Operating additional equipment Connecting audio amplifiers The sound components wizard permits configuration of different audio amplifiers stereo amplifiers surround amplifiers analogue or digital with different digital audio formats Dolby Digital dts MPEG and stereo PCM See the operating manual of the audio amplifier for more information Call TV menu 4 gt Select Connections v go to the menu line below d gt Select Sound components OK calls the sound components wizard v a Mark the HiFi AV amplifier Sound components Sound playback via TV speakers Speakers system HiFi AV amplifier Sound projector HiFi AV amplifier or TV speaker switchable Sound projector or TV speaker switchable OK to continue 4 gt Select whether the sound is to be transmitted digitally or analogue to the the amplifier Continue depending on the amplifier see right column Explanations of the setting possibilities HIFI AV amplifier HIFiI AV amplifier or TV speakers switchable Sound formats Type of amplifier TV loudsp as centre speaker Select setting if an amplifier is connected and your TV set does not have any TV speakers connected Select setting if a
85. ne below d gt Select AV input TV menu Connections Miscellaneous Assign digital audio input to AV1 To connect a DVD player to the digital audio input of the TV set for example connect the digital output socket of the DVD player DIGITAL OUT via a cinch cable to the AUDIO DIGITAL IN socket on the TV set TV set SE mn eme MOHN J hoon goon na namnaman Da waan em bad mat i tz e DVD player The DVD player is already registered at AV1 in the connection wizard at the factory If new devices are connected and registered in the connection wizard the digital audio input AUDIO DIGITAL IN is assigned in the connection wizard see page 38 Audio connection in HDMI DVI devices External devices with DVI connection If an external device with DVI interface is connected via a HDMI DVI adapter to the HDMI1 DVI or HDMI2 DVI socket of the TV set you can connect the digital sound of the external device to the digital audio input socket AUDIO DIGITAL IN The assignment of the digital audio input to the corresponding HDMI socket of the TV set takes place as described in the column on the left If you want to use the analogue sound of the external devices connect it to the AUDIO IN2 socket External devices with HDMI connection If external devices with HDMI interface are connected to the HDMI1 DVI or HDMI2 DVI socket of the TV set no assignment of the audio input is necessary because the digital transmis
86. nge automatically Ce CC Z Blue button Stop Scan stations The frame is green again Picture in Picture Configure Picture in Picture PIP mode In the PIP menu you can set the PIP type Split Screen or Small PIP the PIP function Standard PIP or iPIP and the position of the small picture Start PIP menu im P P mode started if not press PIP button m The frame is green if not press the green button Call the PIP menu Settings PIP Split screen Ss Switch to Small PIP Split screen mg PIP menu open Settings PIP Split screen a d gt Select Type E v go to the menu line below d gt Select Small PIP or Split screen Change position of the PIP small picture im Other than the status line which may possibly be displayed no other display is shown on the screen a wv 4 gt Move the PIP into a corner of the screen The position of the small picture can also be selected under Position in the PIP menu Switch to iPIP Standard PIP function mg PIP menu open Settings PIP Standard PIP D 4 gt Select Functions P e go to the menu line below d gt Select iPIP or Standard PIP In iPIP the frame around the PIP picture is orange iPIP operation When the iPIP function is set the currently displayed picture becomes the PIP picture on pressing the PIP button You can select other stations for the TV picture and still keep an eye on the PIP picture You
87. nt f r Motoren Fussball Heimsieg f r den Meister 14 00 Tagesschau 14 00 Tagesschau Tagesschau 110 112 Kultur 170 Gesellschaft Tagesschau 110 112 Kultur 200 600 _ Lotto Toto Rau Gesellschaft TV Guide 300 400 Wirtschaft 200 600 Lotto Toto tagesschau TV Guide 300 400 Wirtschaft y Page selection a EES e use tagesschau Page selection with the coloured buttons EI OK to call the page w D Red button back to the previously viewed page 4th possibility Green button on to next page ime Thepage consists of several sub pages indicated by the Yellow button to next topic selection option on the last line Blue button to next range of topics EEIEIE The coloured bars for TOP or the coloured text for FLOF TO in the second to last line indicate which coloured buttons CO you can use to page through topic areas and topics 8 Teletext page displays ean TOP table mg The table can only be called for stations with the TOP 0 AV Stop self changing pages operating system 9 Enlarge page press several times OK Call TOP table PIP button Show hide TV picture aa Australien Keine Zugestandnisse TOP table ARD Text tagesschau Vorhersage Wetter Staedte Sport 1 Ballungsr ARD Text Australien Keine Zugestandnisse Tote bei Zugungliick in Schweden Fu ball Reise TV Guide ARD heute ARD morgen Kultur weitere Tennis Auftaktmatch wurde abgebrochen Formel 1 Neues Reglement fiir
88. numbers and names on a grey background These Stations can only be overwritten with the red button Explanations of some search settings Various settings are possible depending on the selected signal source Some settings have already been explained in the initial installation see page 11 onwards Selection of range in which you want to search for the Station Signal source Channel Direct input of channel Frequency Direct input of station frequency TV stand Input of station TV standard B G L D K M N Ask your dealer in this regard Input of the station colour standard PAL SECAM NTSC V PAL60 Autom Ask your dealer in this regard Col standard Managing stations Change delete move rename restore stations me Change stations can also be called via the station list page 18 Call TV menu d gt Select Settings v go to the menu line below d gt Select Stations v go to the menu line below d gt Select Change stations OK call list of stations Change stations 1 ARD 13 WDR 3 2 ZDF 14 BR 3 SAT 1 15 HR 4 D Vierte 16 MDR 3 5 RTL 17 KIKA 6 VOX 18 PHOENIX 7 S RTL 19 BR ALPHA 8 N TV 20 3SAT 9 DSF 21 KABEL 1 10 EinsPlus 100 Das Erste 11 QLive 101 ZDF 12 RTL2 102 WDR K ln 0 0 O M In this menu you can delete move rename or restore OF stations OOO d gt a v or numeric buttons to select the appropriate station Scroll with P P if necessary Delete station
89. o output mains connection for Individual Compose 40 2 mains connection for Individual Compose 46 5 GB Welcome Thank you At Loewe we combine the highest standards of technology design and user friendliness This applies equally for TV video and accessories TV Your new TV set is equipped for the TV standard HDTV High Definition Television With its high resolution screen and future oriented digital interfaces HDMI High Definition Multimedia Interface it offers the possibility of presenting HDTV programmes in outstanding picture quality HIGH DEFINITION TELEVISION HDTV is a worldwide digital standard in the 16 9 format D36 which revolutionises normal TV viewing It is broadcast V3 with an up to five times greater resolution than conven tional signals and therefore creates an unexpectedly 3D image The TV set is equipped for digital reception You can use the already frequently broadcast everywhere television DVB T as well as digital cable DVB C and digital satellite reception DVB S The Loewe Digitalt HD platform even allows dual reception of DVB T DVB C and DVB S if MHEG 5 is selected for location of TV set UK or IRL DVB C und DVB S reception is not possilbe see also on page 12 The TV set is equipped with a Dolby Digital Decoder You can connect a speaker system e g Loewe Individual Sound or active speakers and enjoy movie theater sound You can connect a card reader or a USB stick with digita
90. o to the menu line below 4 gt Select Picture adjustment v go to the menu line below TV menu Picture personal values TV digital Picture adjustment Standard values TV digital 0K ei 4 gt Select desired values for picture des OK call selected values for picture Explanations for picture adjustment Custom adjustments of contrast colour intensity colour temperature brightness sharpness and digital noise supression are saved in the per sonal values There are separate personal values for every signal source TV analogue TV digital HD analogue HD digital PC PhotoViewer By selecting Standard values the picture parameters are reset to factory values for the respective currently active signal source For an explanation of the signal source see glossary Signal input groups In the index of the TV set all the picture and sound adjustments can be reset to the factory values for all signal sources in one step under Reset picture sound or Factory settings picture sound Operation without remote control Changing the station on the TV set Station up down Switching radio on or off or switching to radio R Radio on off or switching between TV and radio e Calling the TV menu on the set gt M call Direct control on TV set menu Volume select function mg Service is for customer service personnel only M or R go to the menu line below make changes M move up one men
91. of the guarantee Environmental protection Energy consumption Your TV set is equipped with an eco standby power supply In the standby mode the power consumption drops to low power see technical data on page 57 If you want to save even more energy then switch the device off with the mains switch However note that in this case EPG Electronic Programme Guide data will be lost and it may be that programmed timer recordings cannot be executed via the TV device Packaging and box You have made a decision to purchase a high quality technical product with a long service life For disposal of the packaging in accordance with national legislation we have paid a fee to a commissioned recycler to pick up the packaging from the dealer Nevertheless we recommend keeping the original box and packaging material on hand so that the device can be transported with optimal protection if necessary The set The EU directive 2002 96 EC regulates the proper way to recycle handle and utilise used electronic devices Old electronic devices consequently must be disposed of separately Please do not dispose of this device in normal household trash You may return your used set free of charge at designated recycling centres or at your specialist dealer whenever you purchase a new comparable set Additional details about return also for non EU countries are available from your local municipal authorities Batteries The batteries supplied a
92. om of the TV set This could damage the control unit If the set has to be put down during packing unpacking place the TV set with the entire front surface lying flat on a soft underlay such as a blanket or the felt from the packing material The LCD screen is made of glass or plastic and can break if not handled properly If the LCD screen is damaged and liquid crystal escapes wear rubber gloves when moving the device In the case of skin contact immediately wash thoroughly with water Power supply The wrong voltage can damage the set This equipment must only be connected to a mains power supply which has the same voltage and frequency as that specified on the rating plate use the mains cable provided The mains plug of the TV set must be easily accessible so that the device can be disconnected from the mains at any time When you unplug the mains plug do not pull on the cable rather pull on the plug housing The cable in the mains plug could be damaged and cause a short circuit the next time it is plugged in Lay out the mains cable in such a manner that it cannot be damaged The mains cable must not be kinked or laid over sharp edges stepped on or exposed to chemicals The latter also applies for the entire equip ment A mains cable with damaged insulation can cause electrical shock and is a fire hazard Air circulation and high temperatures The vent slots on the rear panel of the set must always be kept free Please do not p
93. on of your set allows This will be the maximum right rotation position in future OK confirms basic adjustment to right Rotate TV Basic adjustment left 30 Ga lt gt A d Basic adjustment left ER Turn your TV set as far to the left as the installation 8 position of your set allows This will be the maximum left rotation position in future OK ends the basic adjustment END Close the menu 54 Specifying the switch off position This is where you specify the position that the TV will take when it is switched off In order for the TV set to return to the determined switch off position when switching it off this must be activated see below Call TV menu E Ex 4 gt Select Settings N SS v go to the menu line below 4 gt Select Miscellaneous v go to the menu line below 4 gt Select Rotate TV v go to the menu line below d gt Select Set switch off position OK calls Set switch off position TV menu Settings Miscellaneous Rotate TV Set switch off position d gt Setlesired switch off position The TV set rotates in the process OK Save the set position as the switch off position a 3 Close the menu Activating the switch off position Call TV menu d gt Select Settings k Sch e go to the menu line below 4 gt Select Miscellaneous v go to the menu line below 4 gt Select Rotate TV v go to the menu line below d gt Select Activate switch off
94. ontrol The menus are displayed at the bottom of the screen At the top you get additional information about the selected menu item see Info display on the right me Normal TV mode without other displays Call TV menu TV menu Picture Picture adjustment E SS ee SSS Example Selecting and executing functions 4 gt Select Picture v go to the menu line below 4 gt Select Brightness v go to the menu line below d gt Set Brightness a Return to th rightness menu line to make other picture settings 4 gt Select more OK call more functions 4 gt Select Auto Format v go to the menu line below 4 gt Select on off Inputs with the numeric buttons Conclude the settings See Letters have to be entered for specific functions Like using a mobile phone keypad 1 to 9 press a numeric button until the desired character appears The available letters are printed on the individual numeric buttons 14 The info display The info display shows a content based info text for each menu item at the top edge of the screen to help you in making the settings In conjunc tion with the index it creates a convenient control system w A menu is displayed The factory setting makes the info display appear auto matically for each menu item In this case you can temporarily hide the info texts with the INFO button The automatic info display can be hidden via a menu setting Then it
95. ortant for the frequency display After you have made these settings you should receive the picture and sound of the selected satellites only with Astral and HOTBIRD The symbol rates are specified by the satellite provider and normally do not need to be changed Select the signal source that provides the stations to be on top of your station list starting with station slot 1 Start the automatic station search with OK First TV stations then radio stations are searched for The stations found in the automatic search are divided into the appropriate station blocks depending on the previously selected antenna cables signal sources Sub sequently the stations can only be re sorted within these blocks At the beginning of the station list you will find the block with the stations of the preferred signal source Any mixed sorting of stations from different signal sources is only possible with the favourites list m ForTV sets with MHEG 5 software the stations are tied to Logical Channel Numbers LCN and sorted from 1 799 Digital stations without LCN are stored from 800 onwards Analogue stations are stored from 1001 Then the connection and sound component wizard starts which helps you to log in set and connect video recorders decoders a loudspeaker system or a HIFi AV amplifier to your TV set DVD players and DVD recorders are already registered at the factory You can start the connection wizard and t
96. ound adaptation and Picture format affect the operation of the TV set The HDMI unit can therefore be installed in a concealed position and still be operated Switch back to TV mode to the station last viewed with the TV button Switch Digital Link HD on off temporarily Press the TV button for a little longer approx 1 second TV remote switch on via HDMI In the TV menu under Connections Miscellaneous Remote TV switch on via HDMI you can define that the TV set switches on automatically from standby when a connected HDMI device displays a menu or a disk is inserted Connecting devices to the PC IN connection and playback You can connect a PC or a SetTopBox STB to the PC IN socket and thus use the screen of the TV set as an output device im Wen connecting the TV set to a PC first set your PC to one of the following screen resolutions 800x600 60 Hz SVGA 1280 x 1024 60 Hz SXGA HIGH DEFINITION TELEVISION 1024 x 768 60 Hz XGA 1360 x 768 60 Hz WXGA m Wien connecting a SetTopBox set the following screen resolutions according to the possibilities of the SetTopBox SDTV 720 x 576i 720 x 480i 720 x 576p 720 x 480p HDTV 1280 x 720p 1920 x 1080i Connecting the device Connect the device to the PC IN socket of the TV set via the VGA cable See page 40 for the sound connection Registration in the connection wizard is not necessary Playback from the device Call AV selection AV selection 0k lt gt
97. pecifications top wea D ZP Blue button Switches between the upper default lines date topics and the lower programme list Switching and memorizing with the programme list m n the program list first all currently running programmes are listed mg You are in the lower programme list if not press the blue button v Select station OK view memorise le OR View The programme is in progress the TV set switches to the marked programme Memorise The programme has not started yet and is memorised A appears in front of the programme The TV set switches over automatically to the beginning of the programme or if set in the EPG menu page 31 on from standby mode 30 Adjusting the programme list Example Time entry Stations Tip m The selection is at the top of the specifications if not press the blue button v a Select Date Time Stations or Topics d gt Select defaults within the respective line Mon 31 07 A lt gt d 16 00 16 10 Das Erste Tagesschau 16 00 16 10 ZDF heute in Europa 16 00 16 15 WDR K ln WDR aktuell 16 00 16 05 Bayerisches Rundschau 16 00 16 30 hr fernsehen Schlemmerreise Spanien 16 00 16 15 MDR FERNS Hier ab vier 16 00 16 30 NDR FS HH Tipps und Trends Der Verbraucher 16 00 16 05 SWR Fernse Baden W rttemberg aktuell Charmed Zauberhafte Hexen D0 oO If you are looking for the next news broadcast select today s date for time
98. play on the TV lights orange and the EPG data capture begins When the data capture process has concluded the display will return to red The data capture process is usually per formed between 2 00 am and 5 00 am when the TV set is in standby mode If the TV set is switched on the TV set will switch over to these stations if there are any memorised programmes If the TV set is in standby mode when a memorised pro gramme begins then you can specify here whether the set should be turned on in this case If you have set yes in the menu the TV set will be switched on If you are not in at the time a safety prompt makes sure that the TV switches off automatically after 5 minutes without your acknowledgement Teletext Teletext Additional page selection possibilities Your TV set supports the two operating systems TOP Text and FLOF 1st possibility Up to 2 000 pages are stored so that you have quick access Call overview page 100 Starting and ending Teletext o 2nd possibility Switching Teletext on off Rm Directly enter the page number 100 100 Do 07 09 06 14 ARD Text O 3rd possibility m The page includes 3 digit page numbers e Australien Keine Zugestandnisse eh Tote bei Zugungliick in Schweden fo 7 va mark desired page number Tennis Auftaktmatch wurde abgebrochen o Formel 1 Neues Reglement f r Motoren Fussball Heimsieg f r den Meister Tennis Auftaktmatch wurde abgebrochen Formel 1 Neues Regleme
99. rature brightness sharpness DNC Select memory medium Select memory medium from which the photos are to be reproduced This menu item is only displayed if at least two memory media are available 51 Operating additional equipment Operating Loewe equipment Using the remote control for the TV mode of the TV set G Press the TV button the display above it will light for approx 5 seconds Using the remote control for a recorder REC Press the REC button the display above it will light for approx 5 seconds Using the remote control for a DVD player DVD Press the DVD button the display above it will light for approx 5 seconds Using the remote control for the radio mode of the TV set Press the Radio button the display above it will light for approx 5 seconds As long as a button is pressed the display of the selected operating mode lights up TV REC DVD RADIO This allows you to check which operating mode the remote control is set to every time you press a button Setting the remote control to other Loewe devices The specified button combination must be kept pressed for approx 5 s until one of the LEDs flashes twice Device Button combination Loewe TV GD Loewe Centros 1102 1172 ee Loewe Centros 2102 HD ViewVision sem x Loewe ViewVision DR DVB T Loewe ViewVision 8106 H sec E Loewe Auro 2216 PS 8116 DT eng Loewe Xemix 6222 PS ovo The devices marked by are prese
100. re sound Play front and surround sound Play front surround and centre sound Play via an external HiFi amplifier Selection is only possible if an amplifier has been selected in the sound components wizard see page 46 mg YOucan also enter the number of speakers with the numeric buttons of the remote control Speech Classical Pop Custom music and Custom film sound Adjust the headphones volume Proper boost of bass and treble tones at low volume Here you can make Dolby Pro Logic Il sound settings for movie music matrix and personal settings Menu item only appears with certain sound mode settings call with OK Selection possibility Mono Stereo or Sound 1 or Sound 2 for two sound broadcasts separately for speakers and headphones Only available for analogue stations Reduces volume differences e g for advertisements that are too loud Sound selection for two sound broadcasts Determining the maximum volume that can be set Specify the volume that is set when switching on the TV set with the mains switch This does not affect switching the set on from standby mode The volume can differ according to the individual stations If the sound is too loud or too quiet in relation to other Stations adjust the volume When the menu is open you can select the stations one after another with P P and adjust every single station conveniently Set Stereo Balance so that the volume impression is identcal on the lef
101. rectly to the TV set you can use these as front or centre speakers depending on the setting in the sound components wizard im fyou have not connected any speakers directly to the TV set the two front speakers and the centre speaker Centerspeaker Compose are connected to the subwoofer of the Individual sound system Front a 5 Front Left Right Surround Left Surround Right Setup example for Loewe Individual Sound GB 42 Connecting Switch off all devices before connecting Subwoofer without AUDIO LINK interface cable represented by grey dotted line Plug the adapter cable to the AUDIO LINK interface of the TV set Connect the cinch connections of the adapter cable to the 6 pin cinch connections of the subwoofer Use the 6 pole cinch cable provided with the subwoofer for this The cubic plug cable connects the master connection on the subwoofer to the cubic plug of the adapter cable The adapter and cubic plug cable are available from your dealer see Accessories page 58 Subwoofer with AUDIO LINK interface The subwoofer is connected to the TV set via the AUDIO LINK interface Use the AUDIO LINK cable provided with the subwoofer Individual Sound subwoofer Power OUT Bass Intensity Min x Line IN Phase ight Subw Left 180 SI CSC a 2p EIS Left e ch Lu 50 60Hz ins E NITOIGNY e es Master cubic plug cable adapter cable subwoofer without
102. revious chapter RADIO station forward back a v DISC chapter up down MENU select up down d gt DISC search back forward MENU select left rigt Yellow button Zoom Blue button Set marker Playback DISC short next chapter title long search forward RADIO short fine tuning forward long search forward Stop Functions for the Loewe DVD recorder Centros 1202 2102 HD ViewVision DR OD VVJ O00 CEL COOEOCOOH Ee TV Sound oftion LED indicator for current operating mode Switch over to operate TV set Switch over to operate Recorder Timer recording menu timer recording list menu STOP Title List PLAY Edit thumbnail CARD Photo Music Film Mode ViewVision DR Timeshift Mode STOP Call AV selection AV1 AV4 DV TV ViewVision DR PLAY skip 15 Sec User interface of loaded DVD MENU original playlist Show hide menu V V TV Volume down up Status display TV DVD MENU confirm the menu selection Green button ShowView menu Red button new chapter marker PLAY press short Start of current chapter previous chapter press long search back PAUSE press short slow motion back Record Pause single frame Switch on off on stand by TV Radio Digital Switch over to operate DVD Player TV Sound menu STOP Select station directly MENU enter numbers or letters MENU enter numbers or letters ViewVision DR STOPP Call AV selection Card Reader operation ViewVision DR Home
103. rnal digital audio amplifier and select the appropriate input to this In the connection wizard TV menu gt Connections gt New devices modifications compare the connection diagram with the actual installation and connect as shown if necessary page 37 In the connection wizard TV menu gt Connections New devices modifications compare the connection diagram with the actual installation and connect as shown if necessary page 37 Convert photo file into a standard JPG format on the PC Technical data General data Static contrast ratio 1 200 1 1 200 1 Viewing angle horizontal and vertical Power consumption EN 62087 in operation watt 150 155 in standby watt 1 8 1 8 35 Ambient temperature Celsius a So Relative humidity non condensing 20 80 Air pressure 800 1114 hPa 0 2000 m above sea level Electrical data KEE EE L 2700 ie E Headphones 32 2000 ohm Power 10 res 220 V 240 V 50 60 Hz Mini DIN AVS Video Y C S VHS Hi 8 le VHF UHF cable hyperband Cinch yellow VdeclN CVBS VHS 8 mm REES 45 MHz to 860 MHz Cinch white red Audio IN see L white R red Station storage locations incl AV and radio 4000 2x IEC socket 75 Ohm V 80 m Antenna cable DVB T C ES Ee Ee GE B G L D K M N 2x F socket 75 Ohm 13 18 V 350 MA ccce ANT SAT DVB S S2 eler EISE ME SECAM PAL NTSC NTSC V PAL V 60 Hz 2 x screw terminals Speaker Right ccccccccsesecseesesessess
104. rt a DVD cassette and press play Call AV selection 4 gt Select VIDEO OK to switch over If no picture is visible on the TV screen when playing the recorder search for the recorder station automatically or set it manually To make sure no normal TV stations are found in the Station search pull the antenna plug out of the recorder antenna input temporarily the cable to the antenna system Manual recorder station search Roy ee a reis END m VIDEO is selected by the AV selection Call TV menu d gt Select Settings v go to the menu line below 4 gt Select Stations v go to the menu line below d gt Select Manual adjustment OK to call other settings For Channel enter E30 Blue button Start search When you have found the recorder station Red button Overwrite station slot Exit TV menu Re connect the antenna plug that you temporarily unplugged If disturbances should now occur because a TV station is being broadcast on the same channel as the station of the recorder then you must change the transmission channel on the recorder and scan for the recorder again on the TV set Operating additional equipment Connecting devices to the HDMI DVI connections and playback The HDMI connections High Definition Multimedia In terface permit digital video and audio transmission via a connection cable from a player e g from the Loewe ViewVision DVD recorder The digital p
105. s auto matically played over the speakers of the TV set only if TV speakers are connected or over a speaker system A digital audio signal must be assigned via the TV menu Connections Miscellaneous Assign digital audio input to the COMP IN socket see page 47 Playback from the device Call AV selection AV selection COMP IN oc E 4 gt Select COMP IN socket OK to switch over i E Adapting the geometry only possible with certain signals This is where the picture can be properly positioned and the position of the picture horizontal and vertical can be moved so that it fills the entire screen Call TV menu m A d gt Select and adapt the Geometry Operating additional equipment Sound components wizard The sound components wizard helps you to configure the components used to play the TV sound Depending on what you want to use active speakers speaker systems Loewe Sound Projector and analogue and digital HiFi AV amplifiers can be configured The sound components wizard is preset to playback via TV speakers at the factory If a Loewe Preceiver Auro with link cable has been connected to the TV set you can only select between TV speakers and Auro in the sound components wizard Integrated Dolby Digital Decoder Your TV set is equipped with an integrated Dolby Digital Decoder This system has been introduced to the DVD video range and digital TV sta tions can also broadcast in
106. s guides the reader to related topics for example An information about which pages exist and which pages have sub pages is not available in FLOF H HDCP High bandwidth Digital Content Protection Coding system provided for the interfaces DVI and HDMI for protected transmission of audio and video data HDMI High Definition Multimedia Interface is a newly developed interface for full digital transmission of audio and video data HDTV High Definition Television is an umbrella term that covers a number of high resolution television standards HD Ready A quality seal that is awarded to products which are capable of displaying high definition television HDTV High band and Low band Transmission ranges for satellites J JPEG Joint Photographic Experts Group is a committee that has devel oped a standard method of compression for digital images This JPEG method JPG for short named after the committee is a widely used graphic format for photos JPG See JPEG L LCD Liquid Crystal Display LCN Logical Channel Numbers In stations with LCN the channel location number belonging to the station is also transmitted by the provider The stations are sorted according to these channel location numbers L Link Intelligent system connection between Loewe devices for the automatic exchange of information Makes the operation of TV and Loewe system components even more convenient LNB LNC The crucial electronic component of a s
107. s initial equipment do not contain any pollutants such as cadmium lead or mercury Used batteries should no longer be disposed of in the do mestic waste according to the Battery Ordinance Dispose of your batteries at no charge in the collection containers which are set up for this purpose in retail stores 9 Initial installation Installing the TV set First prepare the chosen installation solution for your TV set See the installation instructions of the wallmount supplied See Accessories page 59 for other installation possibilities Removing the protective foil Slowly and carefully remove the protective foil on the trim Preparing the remote control unit Inserting or replacing batteries Press the embossed arrow and push down the battery compartment cover Insert two alkaline manganese LR 03 AAA batteries ensure that the and poles are correctly positioned Slide the cover up from below Adjusting the remote control for operating the TV set Press the TV button See page 52 to learn about operating other Loewe devices GB 10 Connecting the TV set Connecting to the mains im Note the position of the mains connection in Individual Compose 40 46 Remove the cover for the connections Connect the TV set to a 220 240V outlet First plug the small plug of the mains cable into the mains connection on the rear of the TV then plug the large plug into a mains power outlet Connecting th
108. see the example below When an element is selected it is marked by a check mark M Cal Use this button to go back one step END Exit the wizard with the END button if available Initial installation Connect antenna cable s Antenna cable s for Antenna cable analogue DVB T to antenna socket s ANT TV v ANT TV v ANT TV ANT SAT ANT SAT2 DVB C DVB S cable 1 DVB S cable 2 for es lt 44 bh An example of multiple selection using the yellow button continued on the next page gt 1I Initial installation Explanations of the setting possibilities Location of TV set Antenna selection Encrypted stations DVB T Antenna DVB C Settings DVB S Satellite system High band 212 Select the country for country specific pre settings If UK or IRL is selected for the location of TV set it is pos sible to activate MHEG 5 UK Freeview for the TV set A dialogue appears where you can confirm to set the operating software to the selected location If Yes is selected and confirmed with OK the TV set turns off and on again automatically First installation starts again after activating the operation software If MHEG 5 was activated DVB C and DVB S can not be used anymore Only terrestrial cable and DVB T stations are available Antenna cable analogue analogue stations via cable antenna DVB T digital terrestrial stations DVB C digital stations via cable DVB
109. sesseeeenees red black Kielen Eeer RE Mono Stereo 2 Ton Nicam B G L 2 x screw terminals Speaker Let red black E Dolby Digital Dolby Virtual Speaker DTS Jack 3 5 mm CH Ela d RG Audio nominal power eme 2 x 20 watt Cinch AUDIO IN MaX 2VIMS Ic ccccceecececeeetsttseeeeeeeeeeeseenennneees Centre eletext e TOP FLOF Level 2 5 2 x Cinch GREIS le he L white R red EE 2000 2 x Cinch AUDIO OUT level depends on configuration L white R red Digtial teletext only in UK IRL with active MHEG 5 software MHEG 5 Cinch E AET Cb Pb signal Cinch COMPONENT IN oo eeececeeceeceeeeeeeeeeeeeeneeeeeneeereeneenes Cr Pr signal x Cinch ET C EC TIN MEN Y signal Connections Cinch AUDIO DIGITAL IN Ip Digital audio G Supply voltage Cinch AUDIO DIGITAL OUT GPOIF E Digital audio EURO AV 1 le TC KEEN Y C S VHS Hi 8 SUB D AUDIOUNK cece ccceeccsscecsseeecnseeeesueeenseeeensteeenees Multi sound e CVBS VHS 8 mm SUB D SC PC STB video signal Klee de A CVBS VHS 8 mm SUB D Fee serial interface SE Y C S VHS Hi 8 Mini DIN SERVICE SEPVICE L LINK AUCIO IN PESOSEN L R Mini DIN OTe saennceenncussvenacnsceoncaseseeenscnsetoededts Rotating stand control lte E EE L R USB USB 2 KE Standard JPEG files EURO AV 2 a e oa EE Y C S VHS Hi 8 2 x HDMI Digital Video Audio IN EE CVBS VHS 8 mm Type A 19pole Standard 1 2a Digital video and audio Ge RGB 2 x Cl Slot Common Interface e Slot for CA module Video OUT CVBS VHS 8 mm
110. sion of picture and sound takes place via one connection in HDMI RS 232C interface You can connect either the Loewe Individual Sound Projector or a home network system of different manufacturers e g AMX Crestron to your TV set via the RS 232C interface Please consult your dealer for configuration of the RS 232C interface and further information about the different home networking systems 47 Operating additional equipment The direct way to record You can programme timer recordings via the integrated Digital Recorder or connected recorders on the TV set The recording wizard is integrated at several places for programming a recording Further information about recording with the Digital Recorder can be found in a separate operating manual Programming a timer recording with the EPG m YOu are in EPG mode if not press the EPG button at Mon 31 07 K N now gt soon 17 00 18 00 19 00 2 15 57 16 59 arte 16 00 16 10 Das Erste 16 00 16 10 ZDF Charmed Zauberhafte Hexen Tagesschau heute in Europa WDR aktuell 16 00 16 05 Bayerisches Rundschau 16 00 16 30 hr fernsehen Schlemmerreise Spanien 16 00 16 15 MDR FERNS Hier ab vier 16 00 16 30 NDR FS HH Tipps und Trends Der Verbraucher 16 00 16 05 SWR Fernse Baden Wurttemberg aktuell Charmed Zauberhafte Hexen DO 16 00 16 15 WDR K ln N o v a Mark the desired programme R Red button Call Timer data Change or conf
111. software no update desired OK more or exit wizard OK start software update A bar is displayed to inform you about the progress of the load process During the loading process do not switch off your device via the mains switch This may last up to 20 minutes You will be informed when it is finished At the end of loading Turn off the TV set off with the mains switch and turn it on again This is not necessary when loading the software with the update option Load new software after switch off to standby mode If anew software has not been updated via satellite you will be reminded of this several times when switching on the set Radio Radio mode You can only receive radio stations via DVB If you do not have DVB radio reception then you can play audio from an external device via the TV set using the audio AV inputs mg For TV sets with MHEG 5 software the buttons may be configured differently by the provider Radio mode on RADIO button on the remote control Or R on the operating ring on the TV set 1 DLF Stereo 2 Volume 30 You see and information window about the currently set station Minimise Radio dialog to an info line maximise Stereo 2 Station switching P P or the numeric buttons of the remote control Or on the TV set operating ring Or OK call the station list favourites m Theselection of the stations favorites is the same as the procedure in T
112. t Select station Yellow button Blue button Mark unmark station Mark unmark all OK saves the selected stations Afterwards a list of the stations which are saved but which are temporarily not broadcasting or no longer exist is displayed if available The number of the memory location used is displayed in front of the station Please select the stations you really want to delete Stations no longer found 112 S36 127 Test R 0k Ku 134 TVOTEXT 142 ARD Online e aw 4 gt Select station aoe Yellow button Blue button Mark unmark station Mark unmark all OK deletes the selected station END Exit the search wizard Search update station manual search Call TV menu d gt Select Settings v go to the menu line below 4 gt Select Stations v go to the menu line below d gt Select Manual adjustment OK call input box You can enter or edit the station data in the following lines a H Manual adjustment i Signal source Antenna cable analogue Channel S21 303 25 MHz Frequency Name TV stand Col standard Or Ce Blue button Starts Search and searches for next station Red button Stores station m Onlystations for the selected signal source can be saved which do not yet exist in the station list m Stationswhich already exist in the station list for the selected signal source are displayed with their station
113. t and right Daily operation Adjusting the picture Cm Noy Call TV menu TV menu Picture SR Picture adjustment Ate 4 gt Select Picture v go to the menu line below nf 4 y Th ume Se LEP e j i j ty F me TV menu Picture standard values TV digital Picture adjustment KR INFO Standard values TV digital d gt Select the desired picture function v go to the menu line below d gt Make changes Explanations of the picture settings Picture adjustment Contrast Colour intensity Colour temperature Brightness Sharpness DNC more Image Picture format Move picture up down Auto format DMM Automatic dimmer Switches the picture parameters between standard and personal values Adjust contrast Adjust the colour Set warmer or cooler tints for the picture Adjust the brightness of the picture Adjust the contour sharpness of the picture Removes or reduces the signal noise in the picture Call with OK Picture improvement on off and Demo mode for Image Set picture format see page 22 Move picture vertically see page 22 Automatic detection and setting of the picture format for Cinemascope or widescreen movies Reduce jolting The TV picture adapts to the ambient brightness The power consumption of the TV set is laso reduced Standard values personal values for picture adjustment Com Call TV menu 4 gt Select Picture v g
114. t in the remote control supplied with the TV set D2 TV REC REC MENU n jo a3 DISC M im s Or W De S Weg EE REH GF each ec GC en E SL gt D CH 5 Operating additional equipment Functions for the Loewe DVD player Auro 2216 PS 8116 DT OOOO se OOO OCOEOOQCOLOYLOO OCO Sound off on LED indicator for current operating mode Switch over to operate TV set Switch over to operate Recorder Sleep timer Set TV picture format RADIO Mono Stereo DISC Repeat RADIO display RDS name frequency of station DISC User interface of loaded DVD Show hide menu MENU close window V V Volume down up DISC Title Chapter overview RADIO station table MENU confirm menu selection Green button Title Chapter selection Red button DISC camera position DISC short beginning of chapter title previous chapter long search back RADIO short fine tuning back long search back no function Pause single frame slow motion Switch on off on stand by short TV Radio Digital long Auro FM AM Radio Switch over to operate Auro Select sound format DISC select chapter title RADIO select stored station MENU enter digits MENU enter numbers or letters DISC Repeat A B RADIO FM AM mode Select external audio source DISC menu bar MENU context help DISC Status display RADIO station table MENU hide menu P P DISC next p
115. t many programmes is displayed below the programme list of the broadcasts You can call detailed information with the TEXT button if this function is offered by the TEXT icon in the lower left Programming a recording for a recorder im The selection is in the lower programme list if not press the blue button R es Mark the desired programme oO V e Red button Starts recording wizard Change or confirm timer data if necessary see page 48 the direct recording path Then a red dot will be displayed in front of this programme as an identification Red button Deletes the already programmed recording of the red marked programme from the timer If the timer data have been transferred to an external recorder then the timer must also be deleted there T a aen Configuring EPG Start the EPG menu im EPG mode is started if not press the EPG button Call the EPG menu Station selection lt gt Settings in the EPG menu Select provider only for analogue stations Station selec tion Data capture Switch on TV when marked Explanations of setting possibilities in the EPG menu Select In analogue TV reception there are possibly different Provider providers who broadcast the EPG data for certain sta tion packages To get another range of stations you can change the provider with the Provider selection If the provider you are looking for is not in the list then use the yellow button to per
116. the station broadcasts this Otherwise switch over to an audio input 8 If MHEG 5 is selected for the location of TV set UK or IRL during the e Description of the functions see operating manual Digital Recorder first installation the button has a different funktion 3 D Control unit front side of the device e i E 2 Tt Button M le Call the menu in the menu up down a e The mains switch is located Display on the bottom of the TV Standby Operation Operation without on screen display Radio EPG data capture or timer recording On Off button Switch on from the standby mode Switch off to the standby mode Button Station down in the menu to the left lt Button Station up in the menu to the right gt Button R Radio on off back to TV mode Switch on the radio from the standby mode in the menu down se Display DR nd Digital Recorder inactive no recording no playback DR Digital Recorder active offset TV viewing or archive playback DR Digital Recorder active archive recording Radio only for DVB reception provided the station broadcasts this Otherwise switch over to an audio input GB 4 Connections rear side of the device Common Interface 1 N Factory settings Cl Slot 1 AV1 DVD player Common Interface 2 D AV2 DVD recorder Cl Slot 2 p You can change this during the USB connection Al init
117. timer cannot be called The picture of a connected external recorder is visible but the error message no recorder available is still output Photos on the USB stick are not displayed correctly in the PhotoViewer or a 2 appears Possible cause a EURO AV cable is not fully wired pin 10 not wired b Some recorders can only adopt stations during the initial installation of the TV set The wrong character set has been set in the Teletext menu a The external digital audio amplifier does not support the selected sound format Dolby Digital dts MPEG b TV set and external digital audio amplifier are not connected with each other The device is not registered in the connection wizard or is connected differently from shown in the connection diagram The device is not registered in the connection wizard or is connected differently from shown in the connection diagram The photo is not available in a displayable format Remedy a Replace the EURO AV cable b Restore the recorder to the as delivered State see recorder s operating manual Set the right character set Teletext menu Settings Character set Select Standard or the appropriate character set a Set PCM stereo on the DVD player in the sound selection For DVB stations on the TV set switch to stereo in the status display END language sound selection Green button b Connect Digital Out from the TV set to a Digital In input of the exte
118. tions For MHEG 5 see page 18 or on this page at the right lower column MO 7 Blue button Show programme info For MHEG 5 no programme info is available Programme info 14 43 Detailed info ox EE Permanent display of time Press twice in rapid succession the time is displayed permanently Q or END Hide time GB 22 Selecting the picture format et Press the picture format button until the desired picture a format is marked or a 4 gt to select the desired picture format Wf S P The Panorama picture format can be switched between proportionally correct and format filling reproduction Dark margins are visible on the right and left of the picture A in proportionally correct reproduction Switching over Keep the M button on the set pressed at the same time press the Picture format button on the remote control briefly Bes Resetting Press the same button combination again Explanations of the picture formats m Thesetting options depend on the transmitted picture content 16 9 Proportionally correct display of 16 9 programmes 4 3 Proportionally correct display of 4 3 programmes Panorama Proportionally correct or format filling reproduction delivery status of 4 3 broadcasts on the 16 9 screen Station logos and subtitles remain visible See above for switching Panorama mode Cinema Proportionally correct format filling display of 4 3 broad casts on 16 9 screens Station logo and s
119. u line select other function 21 Daily operation Button functions Every operating mode of the TV set TV Radio Teletext EPG PIP PhotoView er and DR archive has its own menu and own functions for the coloured buttons The function of the coloured buttons is shown at the bottom of the menus and wizards Below some of the function are listed which you need in TV mode for the daily handling of your TV set Functions of the coloured buttons in TV mode m Thecoloured buttons do not work as described below for TV sets with MHEG 5 software but they operate as described on page 33 Digital Teletext ei e Red button Digital Recorder DR archive on off For TV sets with MHEG 5 software you can open the DR archive via the menu Assist see page 15 KS R Green button Open the Teletext functions menu Teletext subtitles 4 A d gt Select Teletext subtitles or Personal text pages SCH Goto the menu line below in Teletext subtitles 4 gt Select the size of the Teletext subtitles OK show Teletext subtitles display only if subtitles are available END END Teletext subtitles off or select off in menu lt Com OK in Personal text pages calls the teletext pages or the teletext page directly if only one page is noted 8 for defining pages see page 33 w gp Yellow button Go to the last viewed station Use this button to quickly switch back and forth between two sta
120. ubtitles usually not visible Zoom Proportionally correct display Maximum picture magnification PALplus Is a 4 3 compatible 16 9 picture broadcast supplied by the station which is detected automatically If a high resolution picture signal is displayed on the TV set or fed in via the interfaces PC IN HDMI1 DVI HDMI2 DVI or COMP IN the picture formats 16 9 TV 4 3 TV as well as 16 9 PC 4 3 PC and Zoom can be set Move picture vertically m In normal TV mode without other displays D a v Move picture up down 7 To show subtitles or news tickers which have been cut off the picture can be moved up or down in the picture formats Panorama Cinema and Zoom not with high resolution signal with the arrow buttons e mg ForTV sets with MHEG 5 software you can switch back and forth quickly between two stations using this buttons see also on page 18 Daily operation Status display m In normal TV mode without other displays END Show hide status display For MHEG 5 INFO button EIDO Digital 5 1 Das Erste 14 30 15 15 Toskana es Eao ge You will see the number and name of the station and the title of the current broadcast if available and the sound identification in the top two lines A selection see right hand column the time and if acti vated the alarm time and switch off time appear at the bottom depending on the DVB station Explanations of the symbols for sound identification
121. us TEES TEIE Parental lock al adjustment of AV standar e e E emm Se di e audio input Timer functions Digital Noise Control DNC Loudspeaker sound SE Switch off today only Headphone sound Allow switching voltage SEN Auto volume RGB insertion at AV2 y One time reminder Remote TV switch on via HDMI AV GE signal Wake up Mon Fri Maximum volume Wake up Sat Switch on volume Volume adjustment for current station Balance ELE Image Picture format Move picture up down H Auto format Film quality improvement DMM Automatic dimmer Wake up Sun Wake up with Wake up signal volume Language Miscellaneous On screen displays On screen display time On screen display position Recording wizard Volume Nimes Automatic info Time and date Time Deviation from Universal Time Date Beginning of daylight saving time End of daylight saving time Software update CA module xxx 4 DVB subtitles DVB character set Western European Standard Polish Greek A wizard is started here Rotate TV _ 2 Menu items only appear for analogue stations Activate switch off position 3 Menu item only appears with certain picture formats see page 22 Set switch off position 4 Menu item only appears if a CA module is plugged in see page 34 Basic adjustment Menu item only appears with certain sound mo
122. ve and call your favourite stations in 6 favourites lists e g for multiple users Each favourites list can contain up to 99 stations After initial installation 10 stations from the station list are already stored in the first list Change the favourites list to suit your requirements see Put together changing favourites lists on page 27 me normal TV mode without other displays OK calls the station list 1 Das Erste ox 2 ZDF 3 WDR K ln 4 Bayrisches FS 5 hr fernsehen 6 Phoenix 7 BR alpha 8 3sat 9 EinsPlus 10 EinsExtra 11 MTV 12 VIVA okolo iolon Select station directly with numeric buttons Or a v Mark stations P P scroll in the pages of the favourites list 4 gt Select other favourites list im Otherfavourites lists can only be selected if these contain stations OK the marked station is called Red button Back to the station list Green button Scan all stations of the currently selected favourites list Yellow button Change the Favourites lists see page 27 Explanation of the favourites lists The selection made with the red button favourites list is retained until you switch back to the station list with the red button again If favourites are selected the name of the favourites list appears after the station name in the status display Explanation of the icons following station names GG Kai Digital DVB T station terrestrial via antenn
123. with the gold coloured contact chip is facing the side of the CA module marked with the provider s logo Note the direction of the arrow printed on the Smart Card CA module side with the provider s brand logo Inserting the CA module in the CI slot m Switch off the TV set s mains switch Remove the cover from the rear of the set Ejector button Cover Carefully insert the CA module in Cl slot 1 or Cl slot 2 with the contact side forward If you are standing in front of the TV set display then the logo on the CA module must be pointing to the rear Do not use force Make sure the module is not twisted in the process If the CA module is correctly installed the ejector button protrudes a little further Replace the cover 34 Searching for encrypted stations mg Thesearch wizard must only be started if the setting option no has been selected during first installation in the search for encrypted stations or no CA module was inserted Call TV menu d gt Select Settings v go to the menu line below 4 gt Select Stations v go to the menu line below d gt Select Search wizard v go to the menu line below d gt Select Change search settings OK wizard prompts search settings See page 24 for a description of the search settings Calling CA module information mg This menu is only available for digital stations Call TV menu d gt Select Settings v go to the menu line

TV Operating Instructions

Contents

Download Pdf Manuals

Related Search

Related Contents