Home

Operating Instructions FM/1/2 digi 42

1. 23 00 O OFF Activation of the standard program After pressing the Reset key see 1 1 Press the key on Mondays at 20 00 The standard program is activated and runs on time 1 3 Entering the time and current day of the week After pressing the Res key see 1 1 During the summer time period press the 1h key once and O With the h key With the m key With the Day key enter the current day 1 Mo 7 Su Keep he key pressed during steps enter the hours enter the minutes Release the key The colon now flashes at one second intervals Note If the h m keys are pressed for longer than 2 seconds the display will enter fast forward scroll mode gt 1 4 Entering switching times 42 ney locations are available Each switching time occupies 1 memory location Keep pressing the Prog key until a free memory location is shown in the display Select the switching functions ON or O OFF with the S key for channel 1 or 2 depending on the version With the h key With the m key If a switching command is to be executed every day proceed with step If 1 switching command is to be executed only on one day or on certain days skip step and continue with step enter the hours enter the minutes Save with the Prog key or O With the Day key select 1 day on which the ete command i
2. automatically saved after approximately 90 seconds The time switch then daha to automatic mode and shows the current time again 2 5 Deleting individual switching times Keep pressing the Prog key until the switching time to be deleted is displayed Set to with the h or m key and keep the key pressed for about 3 seconds The switching time is deleted and the current time is displayed after the key is released 3 2 6 AM PM time display If the 1 key and the h key are pressed simultaneously the time display is switched to AM PM mode used mainly in English speaking countries Note The holiday program has priority over the standard week program The holiday program can only be entered if all seven days o fe week 1234567 are selected Entering switching times as described under The B key must be pressed for each switching time Next save the holiday switching times with the Prog or key Entering the start and duration of the holiday program After entering the switching times for the holiday program Press the Q key once the following image appears Cursor of the current 1 a day of the oll week flashes ILI Ho Holiday Image I If the holiday program is to start on a different day to the current one max 6 days ahead use the Day key to select the day on which the holiday program is to commence If the
3. holiday program is to be executed for up to max 99 days continue with steps If the holiday program is to be executed for an unlimited giad leave out step and continue with step Enter the required number of holiday days with the Sel key 1 to max 99 Press the key to save the entries If the current day of the week was entered as the holiday program start the following appears a f Lf ok an alin hl oO o holiday days Image II Image II remains until the holiday days have passed for example d 10 d 09 d 08 etc Pressing the key again and holding it down now allows the day of the week the time and the current switching state ON or O OFF to be checked If a day of the week other than the current day was entered as the holiday program start the current time is displayed after the key is pressed The holiday program is then started at midnight at the start of the selected day of the week and its duration is displayed Figure Il After the programmed holiday days have expired the current time appears in the display Aborting the holiday program prematurely If the holiday program has already started Press the B key once If the holiday program has not yet started Press the B key twice Technical data Connection Switching capacity Ambient temperature Running reserve Memory locations Shortest switching time Programmable s
4. Operating Instructions FM 1 2 digi 42 WA EKF 2738 07 95 S MMS D Bau 80 10 0679 7 Connection see appliance stamp sticker rating plate Gr sslin time switch modules are largely protected against spike or interference voltages If faults still occur counter measures against foltage peaks can be taken with familiar elements varistors suppressor diodes etc Particular attention must be paid to this when inductive loads are connected 1 Putting into operation The steps marked with the symbol w are necessary to carry out a switching program gt 1 1 Reset Press the Reset key with a pencil or similar object This sets the time switch to its basic setting before every restart to delete al syikching times and the time with the exception of the standard program The following appears after approximately 2 seconds Summer time Hand switch and winter time Reset changeover Enter Enter switching Foire time Days of the week flash Enter Enter minutes time Holiday brogram Select days Deselect days of the week of the week 1 2 Standard program available on request Modules supplied with an integrated standard program can be activated without programming on Mondays on time at 20 00 The senda program contains the following preset switching times which however can also be changed Monday Friday 6 00 ON 22 00 OFF Saturday Sunday 7 00 ON
5. ee unit stamp see unit stamp 10 C to 55 C see unit stamp 42 1 minute every minute
6. ersion Use of this manual override facility does not alter any of the programmed information Automatic Mode Manual Mode Continuous Operation S 9 of ON ON OFF Continuous ON O OFF ON O Continuous OFF The switching times correspond to the entered program If the current switching state is changed manually the next switching command is again executed automatically according to the The output will remain fixed ON or fixed OFF O as selected indefinitely until the AQ key is used to restore the timed function entered switching program 2 3 Reading the programmed switching times Press the Prog key several times displays all entered switching times starting with the first memory location the first free memory location n is then displayed the number of memory locations still free is then displayed If the memory locations are occupied the following appears in the display FR 22 Press the key The time switch changes to automatic mode and displays the current time 2 4 Changing the programmed switching times Keep pressing the Prog key until the switching time to be changed is displayed The new data can then be entered as described in Point 1 4 Note on saving switching times If programming is not completed with the key atter the switching time is entered 1 4 the complete switching command is still
7. s not to be carried out cursor flashes Confirm this day with the Sel key day of the week and cursor flash Press the Day key day is deselected Repeat steps and for every day to be deselected O Save with the Prog key the next free memory location is displayed or Save with the key The time switch goes over to automatic mode and displays the current time Begin every additional switching time and the associated switching state ON or O OFF again with 1 4 Note If an input is incomplete the segments still not selected are displayed flashing If you have deselected a day on which the switching command should be carried out Reselect the deselected day with the Day key day of the week and cursor flash Confirm this day with Sel cursor flashes Press the Day key day is reselected Save with the Prog key the next free memory location is displayed or Save with the o key 1 5 Free channel block formation On the two channel version one timed instruction space can be used to enter a switching command ON or OFF for either channel 1 or Sanel 2 or both channels if required 2 Additional functions 2 7 Holiday program 2 1 Summer time and winter time setting Press the 1h key once 2 2 Manual switch o The current switching state can be changed at any time with the 4 amp key for channel 1 or 2 depending on the v

Operating Instructions FM/1/2 digi 42

Contents

Download Pdf Manuals

Related Search

Related Contents