Operating Instructions
Contents
1. 10 Step7 Adjust the angle of view of the camera and attach the enclosure Adjust the pan tilt etc of the camera and then adjust the angle of view When the adjustment is completed attach the enclosure to the camera Refer to the Installation Guide of each camera for information about how to adjust the angle of view and how to attach and fix the enclosure If the AF Auto Focus button on the side of the camera body must be pressed after attaching the enclosure use the AF button push tool accessory Step8 Attach the decorative cover Align the bracket with the 3 guides of the decorative cover pull out both the spring hooks and attach the hooks to the decorative cover Make sure that the cover is attached to the ceiling with no space between them There are 2 decorative covers When using the attachment plate use the thick cover Use the thin cover for other models The thickness of the x eoi decorative cover Match the Panasonic logos on the cover and on the camera min aA rm ae Specifications Ambient operating temperature Dimensions Mass Finish Standard accessories 10 C to 50 C 14 F to 131 F 2186 mm x 76 2 mm H 97 5 16 inchesx3 inches Including decorative cover thickness 15 7 mm 5 8 inches Approx 350 g 0 77 lbs Main body Surface treatment steel sheet Decorative cover ABS resin resin color sail white Operating Inst2. lt When securing the camera body using 2 screws gt using the attachment plate gt Main body Main body y Triangle mark Triangle mark Attachment plate camera accessory Fixing screws accessory Fixing screws accessory Recommended y po Recommended tightening torque tightening torque 1 6 N m 1 18 Ibf ft 1 6 N m 1 18 Ibf ft Fix the ceiling mount bracket onto the ceiling board Loosen the fixing screws by rotating them counterclockwise until the length between the clamp plates becomes wider than the thickness of the ceiling board Insert the ceiling mount bracket into the ceiling board and clamp and secure the ceiling board by rotating the fixing screws clockwise The Panasonic logo on x Triangle mark the camera and the Important i f decorative cover should e When the ceiling board is Main body be located on the side of plasterboard make sure that this triangle mark no crack was made on the K ceiling board by clamping TR DP ANN Clamp the ceiling Maximum thickness of the ceiling board is board 30 mm Clamp plates 1 3 16 inches for Fixing screws accessory installation Recommended tightening torque 1 6 N m 1 18 Ibf ft Step5 Connect the cables to the camera Remove the enclosure from the camera body and connect the cables from above the ceiling board first Refer to the operating instructions of the camera for information about connection points and how to
3. make connections Step6 Fix the camera body to the ceiling mount bracket The triangle mark of the ceiling mount bracket and the direction marker TOP of the camera body should be located on the opposite sides lt When using 4 mounting holes gt lt When using the adjustment plates gt Fix the camera using 4 fixing screws Fix the camera on the adjustment plates accessory accessory attached in step 3 using 2 fixing screws accessory Main body Main body Triangle mark Triangle mark Install the camera so that the wiring should be con nected from the side of the ceiling mount Camera body bracket Camera body Directi ark Direction marker irection marker MTOP MTOP LE Fixing screws accessory Recommended tightening torque Fixing screws accessory 1 6 N m 1 18 Ibf ft Recommended tightening torque 1 6 N m 1 18 Ibf ft lt When using the attachment plate gt Align the attachment fixing screws on the Holes of the bottom side of the camera with the holes oo piaig of the attachment plate and temporarily attach the camera by rotating it about 15 clockwise Next secure the camera with the camera fixing screw Recommended tightening torque 0 78 N m 0 58 lbf ft Important e When using the adjustment plates do not pass the cables through the hole of the main body When the wiring touches the edges of the main body the cables may get damaged
4. Panasonic Operating Instructions Included Installation Instructions Ceiling Mount Bracket Model No WV Q1 14B Before attempting to connect or install this product please read these instructions carefully and save this manual for future use The model number is abbreviated in some descriptions in this manual Contents Features sc 2 220246 Rests Ales Siri teect a TA 3 Precautions a o O 3 Precautions for installation diia 4 Major Operating Controls nissernes ainean penae Anite edie Aeon 6 Installations A A el ee 7 Specifications neirens eran naear e aara po a aT e Tay EEEa TA ES Era 11 Standard accessories ci A a it 11 This ceiling mount bracket is exclusively designed to mount the camera on a ceiling Refer to the catalog or operating instructions of the camera for further information about the compatible models Precautions This bracket can be used for an area with weak pull out strength such as plasterboard in a double ceiling This bracket is an embedded type to reduce the exposed portion of the camera body Refer installation work to the dealer Installation work requires technique and experi ences Failure to observe this may cause fire electric shock injury or damage to the product Be sure to consult the dealer Avoid installing this bracket in the loca tions where salt damage occurs or corro sive gas is produced Otherwise the mounting portions will deterio rate and ac
5. cidents such as a fall of this product may occur The screws and bolts must be tightened to the specified torque Loosening of mounting screws or bolts may cause a fall of the product resulting in injury or accidents Do not use this bracket except with suit able cameras Failure to observe this may cause a drop result ing in injury Select an installation area that can sup port the total weight Selecting an inappropriate installation surface may cause this product to fall down or topple over resulting in injury or accidents Installation work shall be started after sufficient reinforcement Do not rub the edges of metal parts with your hand Strong rubbing may cause injury Periodic inspections shall be conducted Rust on the metal parts or screws may cause a fall of the product resulting in injury or acci dents Consult the dealer for the inspections The exclusively designed mount bracket shall be used Failure to observe this may cause a drop result ing in injury or accidents Use the exclusively designed mount bracket for installation Do not install this product in locations subject to vibration Loosening of mounting screws or bolts may cause a fall of the product resulting in injury or accidents Do not strike or give a strong shock to this product Failure to observe this may cause fire or injury Install this product in a location high enough to avoid people and objects from bumping the produc
6. ructions this document The following are for installation Fixing screw M4 X 8 Template for tracing the hole shape sts Sadia 8 pcs incl 2 spare screws 1 sheet Adjustment plata me i eae EEE Aaa 2 pcs Decorative COVEM cceseeceesseees AF button push tool eee 11 For U S and Canada Panasonic System Communications Company of North America Unit of Panasonic Corporation of North America www panasonic com business For customer support call 1 800 528 6747 Two Riverfront Plaza Newark NJ 07102 5490 Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 Canada 905 624 5010 www panasonic ca Panasonic System Networks Co Ltd 2014 For Europe and other countries Panasonic Corporation http panasonic net Importer s name and address to follow EU rules Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15 22525 Hamburg Germany Cs0314 0 PGQX1568ZA Printed in China
7. t Failure to observe this may cause injury Do not hang down from this product or use this product as a pedestal Failure to observe this may cause a drop result ing in accidents Precautions for installation Panasonic assumes no responsibility for injuries or property damage resulting from fail ures arising out of improper installation or operation inconsistent with this documenta tion The installation should comply with local electrical code This product is designed to be used indoors This product is not operable outdoors Do not expose this product to direct sunlight for hours and do not install the product near a heater or an air conditioner Otherwise it may cause deformation discoloration and malfunction Keep this product away from water and moisture Installation area for this product e Make sure that the installation area is strong enough to hold the total weight of the camera assembly before installation e The installation area shall have 70 mm 2 3 4 inches or more space behind the ceiling reta e 70 mm 2 3 4 inches or more Tae board between 9 mm 3 8 inches and 30 mm 1 3 16 inches e The thickness of the ceiling board for installation can range between 9 mm 3 8 inches and 30 mm 1 3 16 inches Do not place this product in the following places e Locations where it may get wet from rain or water splash including under the eaves etc e Locations where a chemical agent is used s
8. to remove this product if it will no longer be used Major Operating Controls Clamping screw Spring hook Main body Clamping screw Clamp plate Triangle mark top bottom Decorative cover Spring hook Clamp plate Because the triangle mark is engraved on the bracket it can be seen from both the top and bottom sides Installations Be sure to read Precautions page 3 and Precautions for installation rw page 4 before installation Read the Installation Guide for the camera to be installed as well Step1 Make a hole of 160 mm 6 5 16 inches diameter using a specialized tool etc Make a mounting hole in the ceiling using the template accessory Important e Make a hole precisely When the opened hole is bigger or deformed too much the ceiling mount bracket cannot be stuck on the ceiling board securely Ceiling Step2 Position 2 of the spring hooks of the main body as shown in the illustration below When the ceiling mount bracket is installed after positioning them in the opposite side they may become hard to pull out j Move the hook head downward Spring hook Fix the plates to the ceiling mount bracket Attach the adjustment plates accessory or attachment plate camera accessory to the ceiling mount bracket first if they are needed for the attachment of the camera body lt When securing the camera body
9. uch as a swimming pool e Locations subject to moisture or oil smoke such as a kitchen e Locations that have a specific environment that is subject to an inflammable atmosphere or sol vents e Locations where a radiation an X ray a strong radio wave or a strong magnetic field is gener ated e Locations where corrosive gas is produced locations where it may be damaged by briny air such as seashores e Locations where the temperature is not within the specified range 10 C to 50 C 14 F to 131 F e Locations subject to vibrations such as on vehicles marine vessels or above product lines This product is not designed for on vehicle use e Locations subject to condensation as the result of severe changes in temperature Mounting method for this product This product is designed to be used as a pendant mount camera If the product is mounted on a desktop or at a slant it may not work correctly and its lifetime may be shortened Screw tightening e The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area e Do not use an impact driver Use of an impact driver may damage the screws or cause tightening excessively e When a screw is tightened make the screw at a right angle to the surface After tightening the screws or bolts perform checks to ensure that the tightening is sufficient enough so that there is no movement or looseness Make sure
Download Pdf Manuals
Related Search