Operating Instructions Rotating bucket mixer
Contents
1. Never connect the machine to household socket outlets It may only be connected to special power outlets e g distribution boards for construction sites with earth leakage circuit breakers If a cable reel is used the cable must be fully unwound There is a risk of the cable catching fire from overheating It can also cause a loss of power which will in turn trigger the undervoltage fuse Never use the machine in any areas where there is a potentially explosive atmosphere Risk of explosion Always make sure the machine is at a standstill before you ever take any material samples The consequence of deliberately shutting off any of the safety functions is acute an risk of accidents and injury Always wear ear protection while working with the machine Proper Use The AOX S rotary mixer is an automatic mixing device for the mixing of diverse types of construction materials The materials which can be mixed will depend on the mixing tool used KR mixing tool Diverse types of mortar screed concrete and plasters excluding gypsum plaster DLX mixing tool Adhesive fillers and leveling compounds thin bed mortar gypsum plaster paints and coverings The maximum recommended mixing volume is 50 kg per mixing operation It is recommended that you check the amount of time required for mixing by running tests with the required material first This device is not suitable for use with foodstuffs Working Principle Fill the tub with w2. Collomix R hr und Mischger te GmbH Rotary mixer 85080 Gaimersheim AOX S Operating Instructions Rotating bucket mixer AOX S 230 V 110 V Manufacturer Collomix R hr und Mischger te GmbH Daimlerstra e 9 85080 Gaimersheim Germany Phone 49 8458 3298 0 www collomix com Collomix Art no 37 123 Rev 1 Collomix R hr und Mischger te GmbH Rotary mixer 85080 Gaimersheim AOX S Operator s controls 1 Tub mount 5 Mixing tool drive Alternative DLX mixing tool 2 65 liter tub 6 ON OFF button 3 Mixing tool 7 Carrying handle 4 Swivel arm 8 Machine plug Technical data Size mixing tub 65 liter Capacity max 50 kg depends on material to mix Motor Rotary table 0 55 kW 230 V 110V 50 Hz Speed of mixing tub 18 min Motor Mixing tool 1 kW 230 110 VAC 50 Hz Speed Mixinig tool 750 min Weight 51 kg Dimension 600 x 820 x 870 mm Declaration of EC conformity We declare herewith that this product conforms with the following standards and standard setting documents EN 12100 EN 60204 EN 55104 EN 61000 4 in accordance with directives 2006 95 EC 2004 108 EEC 2006 42 EEC Line 7 A Essing Managing Director Art no 37 123 Rev 1 Side 2 Collomix RUhr und Mischger te GmbH Rotary mixer 85080 Gaimersheim AOX S Safety instructions Please read and observe these instructions before you work with the machine There is a direct risk of personal injury or harm to the health of the use
3. ater and the dry material with the rotary mixer open Then lower the mixing tool with the help of the swivel arm and switch the mixer on at the same time with the green ON button The tub begins to rotate in a counter clockwise direction and the mixing tool starts The material should be ready for use within three minutes The mixing tool switches off whenever the device is opened Art no 37 123 Rev 1 Side 3 Art nr 07039 Collomix RUhr und Mischger te GmbH Rotary mixer 85080 Gaimersheim AOX S j Using for the first time The machine is delivered ready for use in cardboard packaging the net weight is 51 kg Connect the machine plug to the mains power outlet via a suitable extension ruber cable type HO7 RN F min 1 5mm This must have an fault current circuit breaker e g earth leakage circuit breaker Moving the machine The machine comes with a hinged handle for effortless transportation by one person Operation Fill the mixing tub with the mixing material with the tub open Press the green START button The mixing tub begins to rotate Swing down the swivel arm and submerge it in the mixing material While lowering the mixing tool will start to rotate fast The mixing material is guided to the mixing tool as a result of the rotation of the tub To stop the mixing operation press the red OFF button and the machine comes to a stop Whenever the swivel arm is raised the mixing tool drive switches off immedia
4. r or third party if these instructions are not observed The machine is to be used and work of maintenance carried out only by persons who have read the operating instructions and who are acquainted with the occupational safety and accident prevention regulations in force in your country Never use the machine if it is not in good working order use it for the intended use only and have proper regard for safety and danger at all times All faults which may impair safety must be rectified immediately Wear close fitting clothing and safety shoes when using the machine and never wear jewelry of any kind Wear a hair net if you have long hair Make sure the machine stands securely Comply with all electrical regulations applicable to the place of use when you set up the machine Check that the current voltage shown on the rating plate is the same as the mains power supply Do not expose the machine to rain or wet conditions Water entering into the motor will increase the risk of electric shock Do not reach into the mixing container with your hands or any objects while mixing Risk of crushing Always pull out the mains plug when not using the machine before changing the mixing tool or before starting any maintenance work Never use the cable to pull the plug out of the socket outlet Protect the cable from heat oil and sharp edges For outdoor use use only cables which have been approved for the purpose and bear corresponding markings
5. tely The tub continues to rotate To stop it press the red STOP button To change the mixing tool place an open ended wrench on the hexagon mount for the tool and another one on the mixing shaft and slacken Faults The machine comes with an undervoltage trigger This will trigger and shut down the machine is if ever there is a drop in voltage in the mains power supply if the cable is too long or if the power connection is ever cut Restart the machine when the fault has been rectified The thermostat on the motor will switch off the machine if the tub drive is overloaded as a result of too much mixing material or if the mixing material is too viscous Reduce the amount of mixing material and allow the motor to cool down Then restart the machine Maintenance Always pull out the power plug before carrying out any maintenance work Make sure that the machine and operator s controls are always kept clean and in good working order Grease all moving parts at regular intervals with ESSO EP 2 or Mobilux EP 2 Replace all damaged or bent machine parts Keep the ventilation slits on the mixing tool drive clean at all times to make sure there is always adequate ventilation The mixing tool drive comes with self deactivating carbon brushes When the minimum length is reached the machine is switched off The carbon brushes should only ever be replaced by a qualified electrician Use only the genuine Collomix mixing tub Art 60 403 to replace
6. worn mixing tubs Only by using this tub can it be guaranteed that the machine will work properly Faults in the electrical equipment should only be repaired by a qualified electrician Disposal The machine accessories and packaging should be properly recycled and never disposed of with household waste 1 All devices which are no longer suitable for use can be taken for recycling to the nearest public depot for electrical scrap or sent delivery free to the address shown below Warranty The manufacturer provides a 24 month warranty in respect of all production or material defects Please note that all warranty claims must be accompanied by a proof of purchase Warranty and liability claims for personal or material damages are excluded if attributable to one or more of the following causes e Improper use of the machine e Improper start up operation or maintenance of the machine e Damage caused by excessive accumulations of dirt and or incorrect cleaning e Unauthorized structural modifications to the machine e The use and installation of non original replacement parts Art no 37 123 Rev 1 Side 4
Download Pdf Manuals
Related Search