NewAir AH-450B Use and Care Manual
Contents
1. EN YEN VAI CHO SEE 7 Using the Remote CODO 9 CS 9 Clesnilg 10 Troubleshooting 10 Limited Manufacturer s Warranty 12 SPECIFICATIONS AH 450B 120V 12 5A HI 1500W 20290017 5120 BTUs BEFORE FIRST USE e Read and follow all the instructions below even if you feel you are familiar with the appliance e Remove the packing and make sure that the appliance is intact If in doubt do not use the appliance and contact the place of purchase e Do not leave packaging materials such as bags and staples within reach of children e Dispose of packaging carefully and with consideration for the environment e Itis ideal to retain the appliance carton for seasonal storage A Name You Can Trust 4 e For your convenience record the date you received the appliance on the warranty page of these instructions and attach your proof of purchase Retain this information in the event that warranty service is required IMPORTANT INSTRUCTIONS When using any electrical appliance basic safety precautions must be followed in order to reduce the risk of fire electrical shock and or injury to persons or property Be sure to read all instructions before using this appliance and observe the following safety ti2. hours B Setting the timer to turn off the heater Press the timer button once when the heater is in operation The 2H icon will be displayed on the control panel to indicate that the heater will turn off in 2 hours Press the timer button repeatedly to automatically turn off the heater with a selected number of hours in a sequence of 2 4 6 8 10 The timer is adjustable up to 10 hours with an interval rate of 2 hours Timer will be cancelled if you press the TIMER button when it is set to the maximum hour USING THE REMOTE CONTROL There are 6 keys that have the following functions l 1 OON OFF switch 2 A Select the heat setting 3 Timer increase 4 Timer decrease 4 5 Temperature increase 6 Temperature decrease N CAUTION Please dispose or recycle the battery according to municipal or provincial laws SAFETY FEATURES If the heater shuts down 1 Turn off and unplug the heater 2 Wait for at least 10 minutes until the heater cools 3 Plug the heater in to the power outlet and then turn it on A Name You Can Trust 10 This heater includes a safety tip over protection feature which will shut the heater off in case it is tipped over If at any time the heater does tip over please put the heater back in the upright position wheels on bottom controls on top The heater will resume its normal operation CAUTION This heater includes an Overheat Protection System that shuts the unit off if it overhea
3. Q AH 450B Oil Filled Radiator Heater OWNERS MANUAL Read and save these instructions Intertek A Name You Can rust Trust has to be earned and we will earn yours Customer happiness is the focus of our business From the factory to the warehouse from the sales floor to your home the whole NewAir family promises to provide you with innovative products exceptional service and support when you need it the most Count on NewAir As a proud NewAir owner welcome to our family There are no robots here real people shipped your product and real people are here to help you Thank you for your purchase and remember NewAir A Name You Can Trust Call us today at 855 963 9247 Or email support newair com For future reference we recommend you attach a copy of your sales receipt here and record the following information You will need this information if it becomes necessary to contact the manufacturer for service inquiries Date of Purchase Serial Number Model Number Connect with us online http www NewAir com READ AND SAVE THESE INSTRUCTIONS TABLE OF CONTENTS SPCC Ter TO T TEE 3 Belore First 3 important INStrUCHONS 4 6 Assembly 5 nnne nnns nane 6 Operating Instr ctlOLSu ess ike oteenk ee vERRUE XVn S NUT ERU
4. he set temperature or power setting is too low Solution Set the desired temperature higher than the current temperature to restart the heater This is normal The heater will restart once room temperature is lower than set temperature Place the heater in upright position and check for any obstructions If you find an obstruction turn the heater off Unplug the heater and wait at least 10 minutes for it to cool down Carefully remove the obstruction Plug the heater in and restart it as described in the OPERATING INSTRUCTIONS section If you still notice the same problem remove the plug from the outlet and contact the NewAir Customer Support Department Close the window Turn on the main heat source of the room and possibly use more portable heaters Increase the temperature or power setting A Name You Can Trust 12 LIMITED MANUFACTURER S WARRANTY This appliance is covered by a limited manufacturer s warranty For one year from the original date of purchase the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship provided the appliance has been used under normal operating conditions as intended by the manufacturer Warranty Terms During the first year any components of this appliance found to be defective due to materials or workmanship will be repaired or replaced at the manufacturer s discretion at no charge to the original pu
5. o heat or an inability to react to avoid burns Before using the unit check if the voltage indicated corresponds with the intended outlet 120V This heater may include a visual alarm to warn that parts of the heater are getting excessively hot If the alarm flashes immediately turn the heater off and inspect for any objects on or adjacent to the heater that may cause high temperatures DO NOT OPERATE THE HEATER WITH THE ALARM FLASHING SAVE THESE INSTRUCTIONS A Name You Can Trust PARTS LIST front handle control panel Caution indicator light cord wrap caster wheels ASSEMBLY INSTRUCTIONS Unpack your heater and find the wheel holding plate and butterfly nuts between the fin assemblies 1 Make sure the heater is unplugged and in the OFF position Turn the heater upside down 3 Attach the wheel holding plates onto the heater as Fig 1 shows The U plate is fixed between the last two fins and the other one is fixed under the http www NewAir com metal control box Fix the castors to the vertical axis of both the wheel holding plates Insert the butterfly nuts and screw them in tightly 5 Turn the heater upright Your heater is now ready for use WARNING Risk of fire Do not operate heater without wheel N assemblies attached Operate heater in upright position only wheels on bottom controls on top Ensure that the surface beneath the heater is clean and free of any obstructions It i
6. ps e This heater is hot when in use To avoid burns do not let bare skin touch the hot surface If provided always use handles when moving this heater Keep combustible materials such as furniture pillows bedding papers clothes and curtains at least 3 feet 0 9 m from the front of the heater and keep them away from the sides and rear e Extreme caution is necessary when any heater is used by or near children and whenever the heater is left operating and unattended e Alwaysunplug the heater when not in use e Do not operate the heater with a damaged cord or plug if the heater malfunctions or has been dropped or damaged in any manner Return heater to authorized service facility for examination electrical or mechanical adjustment or repair e Do notuse the heater outdoors e This heater is not intended for use in bathrooms laundry areas and similar humid indoor locations Never locate heater where it may fall into a bathtub or other water container e Do not run cord under carpeting Do not cover cord with throw rugs runners or similar items Arrange cord away from high traffic areas where it can be tripped over CAUTION This appliance has a polarized plug one blade is wider than the other To reduce the risk of electric shock this plug is intended to fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician http w
7. rchaser The purchaser will be responsible for any removal or transportation costs Warranty Exclusions The warranty will not apply if damage is caused by any of the following e Power failure e Damage in transit or when moving the appliance e Improper power supply such as low voltage defective household wiring or inadequate fuses e Accident alteration misuse or abuse of the appliance such as using non approved accessories inadequate air circulation in the room or abnormal operating conditions extreme temperatures e Use in commercial or industrial applications e Fire water damage theft war riot hostility or acts of God such as hurricanes floods etc e Use of force or damage caused by external influences e Partially or completely dismantled appliances e Excess wear and tear by the user Obtaining Service When making a warranty claim please have the original bill of purchase with purchase date available Once confirmed that your appliance is eligible for warranty service all repairs will be performed by a NewAir authorized repair facility The purchaser will be responsible for any removal or transportation costs Replacement parts and or units will be new re manufactured or refurbished and is subject to the manufacturer s discretion For technical support and warranty service please email support newairusa com http www NewAir com
8. s not recommended that this heater be placed on high pile carpeting or any other surface that impedes the flow of air underneath the heater This heater includes a visual alarm to warn that parts of the heater are getting excessively hot If the alarm flashes immediately turn the heater off and inspect for any objects on or adjacent to the heater that may cause high temperatures DO NOT OPERATE THE HEATER WITH THE ALARM FLASHING OPERATING INSTRUCTIONS v C6 ub ES GH N wont TEMP 55 10 158085 T 5 ON OFF button 0 TIMER Timer button MODE Mode button A Name You Can Trust Control Panel Functions EW Timer Display Temperature Display Mode Display D Function Button 1 Checkthat neither the appliance nor the power cable has been damaged in any way during transportation when first using the heater 2 Place the heater on a firm level surface at least 3 feet 0 9 m away from any wall and any other objects such as furniture curtains plants or combustible material 3 Plug into a standard 120 V AC 60 Hz source IMPORTANT Your heater is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your elec
9. trician to replace your outlet 4 Heat setting Turn on the power switch and press the ON OFF Q button to turn on the heater Press the MODE button to select the heat setting Press the ON OFF 9 button again The LED will turn off and the heater will stop working When the heater is turned on press MODE button to select appropriate setting which is shown in the LED as follows HI Heater operates at a higher wattage approximately 1500W LO Heater operates at a medium wattage approximately 900W ECO Heater operates in ECO mode alternating between HI and LO settings based on the desired temperature 5 Temperature setting 65 85 When the heater is in operation press the Temperature Increase or V Temperature Decrease button to raise or lower the set temperature The heater will automatically set the temperature to 85 if the temperature is not set within 2 minutes after turning on the heater 6 Timer setting A Setting the timer to turn on the heater When the heater is in stand by mode unit is plugged in but not operating press the TIMER button to set the time at which the heater http www NewAir com will turn on The 2H icon will be displayed on the control panel to indicate that the heater will turn on after 2 hours Press the timer button repeatedly to automatically turn on the heater at any desired hour set in a sequence of 2 4 6 8 10 The timer is adjustable up to 10 hours with an interval rate of 2
10. ts due to abnormal conditions At this time the C Caution Indicator Light gets on If this occurs turn the heater OFF unplug it and inspect and remove any objects on or adjacent to the heater Allow it to cool for a few minutes plug it back in and resume normal operation CLEANING amp STORAGE It is recommended that the heater be cleaned at least once during the operating season in order to provide the optimum level of performance Always turn the power switch off and unplug the heater before cleaning Be sure to save the box for off season storage Turn the heater off unplug it and wait for the heater to cool down Use a dry cloth to clean only the external surfaces of the heater Do not use any cleaning agents or detergents Never immerse the heater in water DE xm eo Du ps Pack the heater in the original carton and store it in a cool and dry place TROUBLESHOOTING Problem Possible Causes Solution There is no power Be sure it is plugged in and that the electrical outlet is working The heater shut off unexpectedly or fails to operate http www NewAir com Problem The room is not hot enough 11 Possible Causes The set temperature is lower than the current room temperature The room temperature has reached the temperature set at the thermostat One of the safety protection devices was activated to prevent overheating The room is too large or a window is open T
11. ww NewAir com This heater draws 12 5 A during operation To prevent overloading a circuit do not plug the heater into a circuit that already has other appliances working CAUTION It is normal for the plug to feel warm to the touch however a loose fit between the AC outlet receptacle and plug may cause overheating and distortion of the plug Contact a qualified electrician to replace a loose or worn outlet To disconnect the heater first turn controls to the OFF position then remove plug from the outlet Never pull by the cord No object should be inserted into any part of the heater at any time To prevent a possible fire do not block air intakes or exhaust in any manner Do not use on soft surfaces like a bed where openings may become blocked A heater has hot and arcing parts inside Do not use it in the areas where gasoline paint or flammable liquids are used or stored Use this heater only as described in this manual Any other use not recommended by the manufacturer may cause fire electric shock or injury to persons CAUTION Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire However if you have to use an extension cord the cord must be No 14 AWG minimum size and rated not less than 1875 W The output of this heater may vary and its temperature may become intense enough to burn exposed skin Use of this heater is not recommended for persons with reduced sensitivity t
Download Pdf Manuals
Related Search