Euri Lighting DLC-1040e Installation Guide
Contents
1. Coo J J C0 J Before starting the installation process TURN OFF POWER at the source of the housing s that you are installing fixture s Push Downlight fixture into recessed housing Z Vie T 310 787 3280 F 310 787 1166 E info eurilighting com Euri Lighting2. and 2 the device must accept any interference received including interference that cause undesired operation Prepare Electrical Wiring Grounding Instructions The grounding and bonding of the overall system shall be done in accordance with National Electric Code NEC article 600 and local codes Dimming The LED luminaires can be dimmed with many andard incandescent dimmers however an electric low oltage version of a standard dimmers with natural connection is recommended for many applications Updates n dimmer technology and special conditions may apply depending on the dimmer and type being used To be assured of the latest information regarding luminaires and dimmers compatibility please contact dimmer manufacturer S Vi Electrical Requirements The LED driver must be supplied with 95 132 VAC 60Hz Electrical Connection ON AC120V JL 2 Lo Downlight Downlight Downlight m 9 DIMMER s Installation eK Z J Remove Downlight form the packaging and check that the mounting clips are firmly attached Contents include 1 Downlight and 2 Socket adapter Remove existing trim and bulb revealing the existing socket Plug in the female connector of the retrofit trim into the male connector of the socket adapter assembly J Spin the downlight a bit to ensure the trim is flush against the ceiling
3. 5 6 LED Downlight LE INSTALLATION GUIDE Euri Lighting DLC 1000e DLC 1020e DLC 1040e Before You Begin Read these instructions completely and carefully A WARNING RISK OF ELECTRIC SHOCK LED RETROFIT KIT REQUIRES INSTALLATION KNOWLEDGE OF LUMINAIRES ELECTRICAL SYSTEMS IF NOT QUALIFIED DO NOT ATTEMPT INSTALLATION CONTACT A QUALIFIED ELECTRICIAN RISK OF FIRE OR ELECTRIC SHOCK INSTALL THIS KIT ONLY IN THE LUMINAIRES THAT HAVE THE CONSTRUCTION FEATURES AND DIMENSION SHOWN IN THE PHOTOGRAPHS AND OR DRAWING DO NOT MAKE OR ALTER ANY OPEN HOLES IN AN ENCLOSURE OF WIRING OR ELECTRICAL COMPONENTS DURING KIT INSTALLATION TO PREVENT WIRING DAMAGE OR ABRASION DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR OTHER SHARP EDGES THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS COMPATIBILITY DIMENSIONS OF HOUSING 5 6 IN DIA X MIN 5 H IN Components Supplied One LED Retrofit Downlight One Installation Guide The unit covered in this report are intended to retrofit Type IC or NON IC recessed mount Listed luminaires with instructions to remove the existing trim The minimum dimensions of luminaires are tabulated below These products are intended to be used in dry or damp locations These products are classified as to FIRE and SHOCK hazards only This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference
Download Pdf Manuals
Related Search