Nature Power 23201 Instructions / Assembly
Contents
1. Version 1 1 Nature POWER le KONA ESSEX SOLAR LAMP With Pillar amp Post Mount Options Instruction Manual KONA Item 23203 ESSEX Item 23201 3 Fitter Pole Pillar Mount 3 Fitter Pole Pillar Mount Item 23203 23201 Thank you very much for choosing a Nature Power Product product For future reference please complete the owner s record below Model Purchase Date Save the receipt and these instructions It is important that you read the entire manual to become familiar with this product before you begin using it This machine is designed for certain applications only The distributor cannot be responsible for issues arising from modification We strongly recommend this machine not be modified and or used for any application other than that for which it was designed If you have any questions relative to a particular application DO NOT use the machine until you have first contacted the distributor to determine if it can or should be performed on the product For technical questions please call 1 800 588 0590 GENERAL SAFETY RULES AN WARNING Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating Failure to follow the safety rules and other basic safety precautions may result in serious personal injury N caution Do not allow persons to operate or assemble this solar light until they have read this manual and have developed a thorough understanding o2. Lamp Base onto desired surface with appropriate screws for your surface 3 Install the lamp head onto Nut 1 by twisting clockwise OPERATION 4 The solar light must be left to charge for a minimum of 2 sunny days in the OFF position upon purchase before best results are achieved 5 For normal operation adjust the switch to the ON position All the LED s will turn on when the sun goes down 6 The performance of the solar post lamp will vary with the time of year It will deliver light for longer times when it has had a full day in the sun rather than a day in overcast weather and likewise the light will run for longer times in summer than in winter LOCATION OF LIGHT For best results please locate your solar light in a position where it can absorb direct sunlight on the solar panel and generally free from cover and shade Page3 of 4 TROUBLESHOOTING If your solar light does not turn ON at dusk despite observance of all the instructions please try the following steps 1 Make sure the solar light is not being affected by any other light source if this is the case move your solar light to a location where there is less light interference 2 Make sure the solar light is not located in the shade during the day 3 Make sure the switch is in the ON position 4 Check that battery is installed correctly 5 If your solar light turns on during the day usually the sensor needs to be reset To do th
3. f how the solar light works J N WARNING The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator SAVE THESE INSTRUCTIONS FEATURES gt Solar rechargeable battery included Aluminum construction makes it rust free Powered by high quality crystalline solar cells Warm white LED s Light automatically turns on at dusk VV V WV Page2 of 4 PARTS LIST ame a e tampa tI Lamp cd d Nut 1 bJ e E Nut 2 Battery Included USE AND CARE e Do not modify the solar light in any way Unauthorized modification may impair the function and or safety and could affect the life of the equipment There are specific applications for which the solar light was designed e Always check of damaged or worn out parts before using the solar light Broken parts will affect the solar light operation Replace or repair damaged or worn parts immediately Store idle solar light When solar light is not in use store it in the OFF position and in a secure place out of reach of children Inspect it for good working condition prior to storage and before re use ASSEMBLY 1 Place screw into Nut 1 place Nut 1 onto lamp base and secure Nut 1 to lamp base from inside with Nut 2 2 Install the
4. is turn the light into the OFF position and take it into a dark room Switch to the ON position and once the light comes on the sensor has been reset MAINTENANCE Maintain your solar light It is recommended that the general condition of any solar light be examined before it is used Clean the solar module with a damp towel to insure optimum performance of the solar light Do not use any type of solvent for cleaning and be careful not to put too much pressure on the module while cleaning LIMITED WARRANTY Nature Power warrants our products to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from date of purchase Dated Proof of Purchase is required Nature POWER Please contact Nature Power Products to acquire more information or technical support 1 800 588 0590 info naturepowerproducts com www naturepowe rproducts com Page4 of 4
Download Pdf Manuals
Related Search