Minka Lavery 4499-298 Instructions / Assembly
Contents
1. INSTALLATION INSTRUCTION FOR FIXTURE 4499 298 READ AND SAVE THESE INSTRUCTIONS WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER ASSEMBLY THE FIXTURE FIG 1 1 Shut off the power supply at the fuse box or circuit breaker 3 Remove the old fixture from ceiling including the old cross Fig 1 bar 2 Carefully unpack your new fixture and lay out all the parts in a clear area Take care not to lose any small parts necessary for installation 3 Thread the center tube N onto the nipple O tightly then put ba OUTLET BOX the decorative arm P over the top end of the center tube N GROUND WIRE lt l 4 Insert the bottom end of the tube I onto the pin M then SUPPLY WIRE ail OUTLET BOX SCREW A protrude the top end of tube I through the hole on the INEN SCREW Yipee O ae decorative arm P and tighten with decorative nut H FAND SCREW 5 Put the canopy F lock washer E onto the center tube N WIRE NUT and secure with hex nut D s 6 Assemble the fabric shade R onto the fixture arm using A HEX NUT D screw With nut Q well aaaaa LOCK WASHER E 7 Put the glass shade K over the socket L and secure with l A socket ring J posme AT 8 Install the bulbs in accordance with the fixture s specifications l TUBE i DO NOT EXCEED THE MAXIMUM WATTAGE RATING SOCKET RINGW FABRIC SHADE R MOUNTING THE FIXTURE nee Ane 9 Attach the universal mounting plate B to the outlet2. box using VT SCREW WITH NUT G the outlet box screws A The side of the mounting bar marked GND must face out RENTET AREN SOCKET L 10 Follow the wiring instructions carefully See Fig 2 ee NS A TUe 11 Attach the fixture main body onto the universal mounting plate STUDM B by protruding 2 mounting screws C through the mounting holes of the ceiling canopy F and secure with ball nut G ee See fig 2 Connect the electrical wires as follows Connect the black wire from the fixture to the black HOT house wire Connect the white wire from the fixture to the white Neutral house wire Make sure all the wire nuts were secured You may wrap the connections with electrical tape If your outlet box has a ground wire Green or Bare Copper connect fixture s ground wire to it Other wise attach the bare copper fixture wire to the green ground screw on the mounting bar Fig 2 2 Tuck the wire connections neatly into the ceiling junction box FIXTURE gt FIXTURE gt FIXTURE 7 WIRES WIRES WIRES ane Black or N White or i Bare Your installation is now complete Turn on the power supply of Smooth a he Copper the junction box to test the fixture Ground r HOUSE HOUSE HOUSE american WIRES WIRES WIRES Black White Green Ig hti ng Hot Neutral Ground LISTED association
Download Pdf Manuals
Related Search